ISO PUBLICATIONS

You can now purchase PDFs of ISO Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. ISO Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

  • ISO 105-D01:2010 (Edition 5) Textiles. Tests for colour fastness. Colour fastness to drycleaning using perchloroethylene solvent
  • ISO 105-E01:2010 (Edition 5) Textiles. Tests for colour fastness. Colour fastness to water
  • ISO 105-E03:2010 (Edition 4) Textiles. Tests for colour fastness. Colour fastness to chlorinated water (swimming-pool water)
  • ISO 105-E07:2010 (Edition 4) Textiles. Tests for colour fastness. Colour fastness to spotting. Water
  • ISO 105-E09:2010 (Edition 4) Textiles. Tests for colour fastness. Colour fastness to potting
  • ISO 105-E12:2010 (Edition 4) Textiles. Tests for colour fastness. Colour fastness to milling. Alkaline milling
  • ISO/HL7 27932:2009 (CD-ROM) Data Exchange Standards. HL7 Clinical Document Architecture, Release 2
  • ISO 1135-4:2010 (Edition 4) Transfusion equipment for medical use. Transfusion sets for single use
  • ISO 1182:2010 (Edition 5) Reaction to fire tests for products. Non-combustibility test
  • ISO 1513:2010 (Edition 4) Paints and varnishes. Examination and preparation of test samples
  • ISO 1628-3:2010 (Edition 3) Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. Polyethylenes and polypropylenes
  • ISO 1825:2010 (Edition 3) Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling. Specification
  • ISO 1833-24:2010 Textiles. Quantitative chemical analysis. Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane)
  • ISO 3266:2010 (Edition 2) Forged steel eyebolts grade 4 for general lifting purposes
  • ISO 3386-1:1986 Polymeric materials, cellular flexible. Determination of stress-strain characteristics in compression. Low-density materials
    AMENDMENT 1:April 2010
  • ISO 3386-2:1997 Flexible cellular polymeric materials. Determination of stress-strain characteristics in compression. High-density materials
    AMENDMENT 1:April 2010
  • ISO 3500:2005 Gas cylinders. Seamless steel CO2 cylinders for fixed fire-fighting installations on ships
    AMENDMENT 1:May 2010
  • ISO 4468:2009 Gear hobs. Accuracy requirements
    CORRIGENDUM 1:November 2009
  • ISO 4662:2009 Rubber, vulcanized or thermoplastic. Determination of rebound resilience
    CORRIGENDUM 1:March 2010
  • ISO 7867-2:2005 Tyres and rims (metric series) for agricultural tractors and machines. Service description and load ratings
    AMENDMENT 1:May 2010
  • ISO 8000-102:2009 (CD-ROM) Data quality. Master data. Exchange of characteristic data. Vocabulary
  • ISO 8573-1:2010 (Edition 3) Compressed air. Contaminants and purity classes
  • ISO 8789:2010 (Edition 2) Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles. Specification
  • ISO/IEC 8824-1:2008 (Edition 4) Information technology. Abstract Syntax Notation One (ASN.1). Specification of basic notation
  • ISO/IEC 8824-2:2008 (Edition 4) Information technology. Abstract Syntax Notation One (ASN.1). Information object specification
  • ISO/IEC 8824-3:2008 (Edition 4) Information technology. Abstract Syntax Notation One (ASN.1). Constraint specification
  • ISO/IEC 8824-4:2008 (Edition 4) Information technology. Abstract Syntax Notation One (ASN.1). Parameterization of ASN.1 specifications
  • ISO/IEC 8825-1:2008 (Edition 4) Information technology. ASN.1 encoding rules. Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER)
  • ISO/IEC 8825-2:2008 (Edition 4) Information technology. ASN.1 encoding rules. Specification of Packed Encoding Rules (PER)
  • ISO/IEC 8825-3:2008 (Edition 2) Information technology. ASN.1 encoding rules. Specification of Encoding Control Notation (ECN)
  • ISO/IEC 8825-4:2008 (Edition 2) Information technology. ASN.1 encoding rules. XML Encoding Rules (XER)
  • ISO/IEC 8825-5:2008 (Edition 2) Information technology. ASN.1 encoding rules. Mapping W3C XML schema definitions into ASN.1
  • ISO/IEC 8825-6:2008 (Edition 2) Information technology. ASN.1 encoding rules. Registration and application of PER encoding instructions
  • ISO 8894-1:2010 (Edition 2) Refractory materials. Determination of thermal conductivity. Hot-wire methods (cross-array and resistance thermometer)
  • ISO 9173-2:2010 Dentistry. Extraction forceps. Designation
  • ISO 9809-1:2010 (Edition 2) Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Quenched and tempered steel cylinders with tensile strength less than 1100 MPa
  • ISO 9809-2:2010 (Edition 2) Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Quenched and tempered steel cylinders with tensile strength greater than or equal to 1100 MPa
  • ISO 9809-3:2010 (Edition 2) Gas cylinders. Refillable seamless steel gas cylinders. Design, construction and testing. Normalized steel cylinders
  • ISO 9815:2010 (Edition 3) Road vehicles. Passenger-car and trailer combinations. Lateral stability test
  • ISO 9917-2:2010 (Edition 2) Dentistry. Water-based cements. Resin-modified cements
  • ISO/TS 10004:2010 Quality management. Customer satisfaction. Guidelines for monitoring and measuring
  • ISO 10298:2010 (Edition 2) Determination of toxicity of a gas or gas mixture
  • ISO 10303-214:2010 (CD-ROM) (Edition 3) Industrial automation systems and integration. Product data representation and exchange. Application protocol. Core data for automotive mechanical design processes
  • ISO/IEC 10373-6:2001 Identification cards. Test methods. Proximity cards
    AMENDMENT 7:March 2010
  • ISO 10426-1:2009 Petroleum and natural gas industries. Cements and materials for well cementing. Specification
    CORRIGENDUM 1:April 2010
  • ISO 10580:2010 Resilient, textile and laminate floor coverings. Test method for volatile organic compound (VOC) emissions
  • ISO 11237:2010 Rubber hoses and hose assemblies. Compact wire-braid-reinforced hydraulic types for oilbased or water-based fluids. Specification
  • ISO 11795:1997 Agricultural tractor drive wheel tyres. Method of measuring tyre rolling circumference
    AMENDMENT 1:May 2010
  • ISO 12030:2010 Tobacco and tobacco products. Non-destructive determination of strips density variation ratio in case. Ionizing radiation method
  • ISO 12344:2010 Thermal insulating products for building applications. Determination of bending behaviour
  • ISO 12872:2010 Olive oils and olive-pomace oils. Determination of the 2-glyceryl monopalmitate content
  • ISO 12873:2010 Olive oils and olive-pomace oils. Determination of wax content by capillary gas chromatography
  • ISO 12924:2010 Lubricants, industrial oils and related products (Class L). Family X (Greases). Specification
  • ISO 12956:2010 (Edition 2) Geotextiles and geotextile-related products. Determination of the characteristic opening size
  • ISO 12958:2010 (Edition 2) Geotextiles and geotextile-related products. Determination of water flow capacity in their plane
  • ISO/IEC 13157-1:2010 Information technology. Telecommunications and information exchange between systems. NFC-SEC NFCIP-1 security services and protocol
  • ISO/IEC 13157-2:2010 Information technology. Telecommunications and information exchange between systems. NFC Security NFC-SEC cryptography standard using ECDH and AES
  • ISO 13254:2010 Thermoplastics piping systems for non-pressure applications. Test method for watertightness
  • ISO 13255:2010 Thermoplastics piping systems for soil and waste discharge inside buildings. Test method for airtightness of joints
  • ISO 13259:2010 Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
  • ISO 13262:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam
  • ISO 13263:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for impact strength
  • ISO 13265:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
  • ISO 13266:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
  • ISO 13267:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
  • ISO 13399-1:2006 Cutting tool data representation and exchange. Overview, fundamental principles and general information model
    AMENDMENT 1:May 2010
  • ISO 13472-2:2010 Acoustics. Measurement of sound absorption properties of road surfaces in situ. Spot method for reflective surfaces
  • ISO 13855:2010 (Edition 2) Safety of machinery. Positioning of safeguards with respect to the approach speeds of parts of the human body
  • ISO 14122-1:2001 Safety of machinery. Permanent means of access to machinery. Choice of fixed means of access between two levels
    AMENDMENT 1:April 2010
  • ISO 14122-2:2001 Safety of machinery. Permanent means of access to machinery. Working platforms and walkways
    AMENDMENT 1:April 2010
  • ISO 14122-3:2001 Safety of machinery. Permanent means of access to machinery. Stairs, stepladders and guard-rails
    AMENDMENT 1:April 2010
  • ISO 14122-4:2004 Safety of machinery. Permanent means of access to machinery. Fixed ladders
    AMENDMENT 1:April 2010
  • ISO/TS 14253-4:2010 Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment. Background on functional limits and specification limits in decision rules
  • ISO/IEC 14496-3:2009 Information technology. Coding of audio-visual objects. Audio
    CORRIGENDUM 1:December 2009
  • ISO/IEC 14496-5:2001 Information technology. Coding of audio-visual objects. Reference software
    AMENDMENT 15:May 2010
  • ISO/IEC 14496-16:2009 (CD-ROM) (Edition 3) Information technology. Coding of audio-visual objects. Animation Framework eXtension (AFX)
  • ISO 14602:2010 (Edition 2) Non-active surgical implants. Implants for osteosynthesis. Particular requirements
  • ISO 15225:2010 (Edition 2) Medical devices. Quality management. Medical device nomenclature data structure
  • ISO/IEC 15420:2009 (Edition 2) Information technology. Automatic identification and data capture techniques. EAN/UPC bar code symbology specification
  • ISO 15472:2010 (Edition 2) Surface chemical analysis. X-ray photoelectron spectrometers. Calibration of energy scales
  • ISO 15622:2010 (Edition 2) Intelligent transport systems. Adaptive cruise control systems. Performance requirements and test procedures
  • ISO 15653:2010 Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
  • ISO 15747:2010 (Edition 2) Plastic containers for intravenous injections
  • ISO 15769:2010 Hydrometry. Guidelines for the application of acoustic velocity meters using the doppler and echo correlation methods
  • ISO/IEC 15938-6:2003 Information technology. Multimedia content description interface. Reference software
    AMENDMENT 3:May 2010
  • ISO/IEC TR 15938-8:2002 Information technology. Multimedia content description interface. Extraction and use of MPEG-7 descriptions
    AMENDMENT 5:March 2010
  • ISO 17078-4:2010 (CD-ROM) Petroleum and natural gas industries. Drilling and production equipment. Practices for side-pocket mandrels and related equipment
  • ISO/IEC 18014-2:2009 (Edition 2) Information technology. Security techniques. Time-stamping services. Mechanisms producing independent tokens
  • ISO/IEC 18014-3:2009 (Edition 2) Information technology. Security techniques. Time-stamping services. Mechanisms producing linked tokens
  • ISO/IEC 18033-4:2005 Information technology. Security techniques. Encryption algorithms. Stream ciphers
    AMENDMENT 1:December 2009
  • ISO/IEC TR 18047-2:2006 Information technology. Radio frequency identification device conformance test methods. Test methods for air interface communications below 135 kHz
    CORRIGENDUM 1:March 2010
  • ISO 18901:2010 (Edition 2) Imaging materials. Processed silver gelatin-type black-and-white films. Specifications for stability
  • ISO/IEC 19785-1:2006 Information technology. Common Biometric Exchange Formats Framework. Data element specification
    AMENDMENT 1:April 2010
  • ISO/IEC 19785-2:2006 Information technology. Common Biometric Exchange Formats Framework. Procedures for the operation of the Biometric Registration Authority
    AMENDMENT 1:April 2010
  • ISO/IEC 19785-3:2007 Information technology. Common Biometric Exchange Formats Framework. Patron format specifications
    AMENDMENT 1:April 2010
  • ISO/IEC 19794-2:2005 Information technology. Biometric data interchange formats. Finger minutiae data
    AMENDMENT 1:April 2010
  • ISO/IEC TR 20000-5:2010 Information technology. Service management. Exemplar implementation plan
  • ISO 20869:2010 (Edition 2) Footwear. Test method for outsoles, insoles, linings and insocks. Water soluble content
  • ISO 20906:2009 Acoustics. Unattended monitoring of aircraft sound in the vicinity of airports
  • ISO/TS 22239-1:2009 Road vehicles. Child seat presence and orientation detection system (CPOD). Specifications and test methods
  • ISO/TS 22239-2:2009 Road vehicles. Child seat presence and orientation detection system (CPOD). Resonator specification
  • ISO/TS 22239-3:2009 Road vehicles. Child seat presence and orientation detection system (CPOD). Labelling
  • ISO 22621-5:2010 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA). Fitness for purpose of the system
  • ISO 22621-6:2010 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA). Code of practice for design, handling and installation
  • ISO/TR 23849:2010 Guidance on the application of ISO 13849-1 and IEC 62061 in the design of safety-related control systems for machinery
  • ISO 24100:2010 Intelligent transport systems. Basic principles for personal data protection in probe vehicle information services
  • ISO/IEC 24764:2010 Information technology. Generic cabling systems for data-centres
  • ISO/IEC 24792:2010 Information technology. Telecommunications and information exchange between systems. Multicast Session Management Protocol (MSMP)
  • ISO/IEC 24800-3:2010 Information technology. JPSearch. Query format
  • ISO 27108:2010 Water quality. Determination of selected plant treatment agents and biocide products. Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
  • ISO/IEC 29109-2:2010 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Finger minutiae data
  • ISO/IEC 29109-4:2010 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Finger image data
  • ISO 29481-1:2010 Building information modeling. Information delivery manual Methodology and format
  • ISO 30002:2010 Ships and marine technology. Ship recycling management systems. Guidelines for selection of ship recyclers (and pro forma contract)
  • ISO/TS 80004-3:2010 Nanotechnologies. Vocabulary. Carbon nano-objects

Published in international.