BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our website www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 336:2010 Specification for fire hose couplings and ancillary equipment
    Supersedes BS 336:1989
  • BS 6089:2010 Assessment of in-situ compressive strength in structures and precast concrete components. Complementary guidance to that given in BS EN 13791
    Supersedes BS 6089:1981
  • BS 6349-2:2010 Maritime works. Code of practice for the design of quay walls, jetties and dolphins
    Supersedes BS 6349-2:1988
  • BS 7291-1:2010 Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings. General requirements
    Supersedes BS 7291-1:2006
  • BS 7291-2:2010 Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings. Specification for polybutylene (PB) pipe and associated fittings
    Supersedes BS 7291-2:2006
  • BS 7291-3:2010 Thermoplastics pipe and fitting systems for hot and cold water for domestic purposes and heating installations in buildings. Specification for crosslinked polyethylene (PE-X) pipes and associated fittings
    Supersedes BS 7291-3:2006
  • BS 7371-7:2010 Coatings on metal fasteners. Specification for mechanically applied zinc and zinc based coatings
    Supersedes BS 7371-7:1994
  • BS 7375:2010 Distribution of electricity on construction and demolition sites. Code of practice
    Supersedes BS 7375:1996
  • BS 7533-7:2010 Pavements constructed with clay, natural stone or concrete pavers. Code of practice for the construction of pavements of natural stone paving units and cobbles, and rigid construction with concrete block paving
    Supersedes BS 7533-7:2002
  • BS 7533-9:2010 Pavements constructed with clay, natural stone or concrete pavers. Code of practice for the construction of rigid pavements of clay pavers
  • BS 7533-10:2010 Pavements constructed with clay, natural stone or concrete pavers. Guide for the structural design of trafficked pavements constructed of natural stone setts and bound construction with concrete paving blocks
    Supersedes BS 7533-10:2004
  • BS 8243:2010 Installation and configuration of intruder and hold-up alarm systems designed to generate confirmed alarm conditions. Code of practice
    Supersedes DD 243:2004 which remains current

BS EN publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN ISO 105-C06:2010 Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering
    Supersedes BS EN ISO 105-C06:1997
  • BS EN 196-8:2010 Methods of testing cement. Heat of hydration. Solution method
    Supersedes BS EN 196-8:2003
  • BS EN 196-9:2010 Methods of testing cement. Heat of hydration. Semi-adiabatic method
    Supersedes BS EN 196-9:2003
  • BS EN 206-9:2010 Concrete. Additional rules for self-compacting concrete (SCC)
  • BS EN ISO 286-1:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Basis of tolerances, deviations and fits
    Supersedes BS EN 20286-1:1993
  • BS EN ISO 734-2:2010 Oilseed meals. Determination of oil content. Rapid extraction method
    Supersedes BS EN ISO 734-2:2008
  • BS EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption. Installation
    Partially supersedes BS 6700:2006+A1:2009
  • BS EN 933-9:2009 Tests for geometrical properties of aggregates. Assessment of fines. Methylene blue test
    Supersedes BS EN 933-9:1999
  • BS EN 1278:2010 Chemicals used for treatment of water intended for human consumption. Ozone
    Supersedes BS EN 1278:1999
  • BS EN 1367-2:2009 Tests for thermal and weathering properties of aggregates. Magnesium sulfate test
    Supersedes BS EN 1367-2:1998
  • BS EN 1744-1:2009 Tests for chemical properties of aggregates. Chemical analysis
    Supersedes BS EN 1744-1:1998
  • BS EN 1847:2009 Flexible sheets for waterproofing. Plastics and rubber sheets for roof waterproofing. Methods for exposure to liquid chemicals, including water
    Supersedes BS EN 1847:2001
  • BS EN 1856-1:2009 Chimneys. Requirements for metal chimneys. System chimney products
    Supersedes BS EN 1856-1:2003
  • BS EN 1856-2:2009 Chimneys. Requirements for metal chimneys. Metal flue liners and connecting flue pipes
    Supersedes BS EN 1856-2:2004
  • BS EN 2240-036:2010 Aerospace series. Lamps, incandescent. Lamp, code 388. Product standard
  • BS EN 2241:2010 Aerospace series. Lamp caps. Dimensions
  • BS EN 2852:2010 Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated. Classification: 1100 MPa/650ºC
  • BS EN ISO 2871-1:2010 Surface active agents. Detergents. Determination of cationic-active matter content. High-molecular-mass cationic-active matter
    Supersedes BS EN ISO 2871-1:1994
  • BS EN ISO 2871-2:2010 Surface active agents. Detergents. Determination of cationic-active matter content. Cationic-active matter of low molecular mass (between 200 and 500)
    Supersedes BS EN ISO 2871-2:1994
  • BS EN 3529:2010 Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Forgings. a or D ? 150 mm. 1750 MPa ? Rm ? 2000 MPa
  • BS EN ISO 3743-1:2009 Acoustics. Determination of sound power levels of noise sources. Engineering methods for small, movable sources in reverberant fields. Comparison method for hard-walled test rooms
    Supersedes BS EN ISO 3743-1:1995
  • BS EN ISO 3744:2009 Acoustics. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
    Supersedes BS EN ISO 3744:1995
  • BS EN ISO 3746:2009 Acoustics. Determination of sound power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
    Supersedes BS EN ISO 3746:1996
  • BS EN ISO 3747:2009 Acoustics. Determination of sound power levels of noise sources using sound pressure. Comparison method in situ
    Supersedes BS EN ISO 3747:2000
  • BS EN ISO 3821:2010 Gas welding equipment. Rubber hoses for welding, cutting and allied processes
    Supersedes BS EN 559:2003
  • BS EN ISO 3960:2010 Animal and vegetable fats and oils. Determination of peroxide value. Iodometric (visual) endpoint determination
    Supersedes BS EN ISO 3960:2008
  • BS EN 4619:2010 Aerospace series. Inserts, MJ threads, selflocking, with self-broaching keys. Installation and removal procedure
  • BS EN 4620:2010 Aerospace series. Inserts, MJ threads, selflocking, with self-broaching keys. Design standard
  • BS EN 4621:2010 Aerospace series. Inserts, MJ threads, selflocking, self-broaching keys. Technical specification
  • BS EN 4650:2010 Aerospace series. Wire and cable marking process, UV Laser
  • BS EN ISO 5136:2009 Acoustics. Determination of sound power radiated into a duct by fans and other airmoving devices. In-duct method
    Supersedes the dual numbered standard BS EN ISO 5136:2003, BS 848-2.5:2003
  • BS EN ISO 5171:2010 Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
    Supersedes BS EN 562:2003
  • BS EN ISO 5173:2010 Destructive tests on welds in metallic materials. Bend tests
    Supersedes BS EN 910:1996
  • BS EN ISO 7235:2009 Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss
    Supersedes BS EN ISO 7235:2003
  • BS EN ISO 8536-2:2010 Infusion equipment for medical use. Closures for infusion bottles
    Supersedes BS EN ISO 8536-2:2002
  • BS EN ISO 9117-2:2010 Paints and varnishes. Drying tests. Pressure test for stackability
    Supersedes the dual numbered standard BS EN ISO 4622:1995, BS 3900-C7:1993
  • BS EN ISO 9117-3:2010 Paints and varnishes. Drying tests. Surface drying test using ballotini
    Supersedes the dual numbered standard BS EN ISO 1517:1995, BS 3900-C2:1994
  • BS EN ISO 9614-3:2009 Acoustics. Determination of sound power levels of noise sources using sound intensity. Precision method for measurement by scanning
    Supersedes BS EN ISO 9614-3:2002
  • BS EN ISO 11202:2009 Acoustics. Noise emitted by machinery and equipment. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
    Supersedes BS EN ISO 11202:1996
  • BS EN ISO 11203:2009 Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
    Supersedes BS EN ISO 11203:1996
  • BS EN ISO 11205:2009 Acoustics. Noise emitted by machinery and equipment. Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
    Supersedes BS EN ISO 11205:2003
  • BS EN ISO 11546-2:2009 Acoustics. Determination of sound insulation performances of enclosures. Measurements in situ (for acceptance and verification purposes)
    Supersedes BS EN ISO 11546-2:1996
  • BS EN ISO 11957:2009 Acoustics. Determination of sound insulation performance of cabins. Laboratory and in situ measurements
    Supersedes BS EN ISO 11957:1997
  • BS EN 12254:2010 Screens for laser working places. Safety requirements and testing
    Supersedes BS EN 12254:1998+A2:2008
  • BS EN 12663-2:2010 Railway applications. Structural requirements of railway vehicle bodies. Freight wagons
    Supersedes BS EN 12663:2000
  • BS EN 12871:2010 Wood-based panels. Performance specifications and requirements for load bearing boards for use in floors, walls and roofs
    Supersedes BS EN 12871:2001
  • BS EN 13177:2010 Chemicals used for treatment of water intended for human consumption. Methanol
    Supersedes BS EN 13177:2002
  • BS EN 14022:2010 Structural adhesives. Determination of the pot life (working life) of multicomponent adhesives
    Supersedes BS EN 14022:2003
  • BS EN 14250:2010 Timber structures. Product requirements for prefabricated structural members assembled with punched metal plate fasteners
    Supersedes BS EN 1250:2004
  • BS EN 14294:2010 Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding on processes
    Supersedes BS EN 14294:2004
  • BS EN 15436-4:2009 Road service area maintenance equipment. Delivery acceptance of the machines by the users
  • BS EN 15733:2009 Services of real estate agents. Requirements for the provision of services of real estate agents
  • BS EN 15794:2009 Determination of explosion points of flammable liquids
  • BS EN 15796:2010 Chemicals used for treatment of swimming poolwater. Calcium hypochlorite
  • BS EN 15797:2010 Chemicals used for the treatment of swimming pool water. Iron based coagulants
  • BS EN 15798:2010 Products used for the treatment of swimming pool water. Filter media
  • BS EN 15799:2010 Products used for treatment of swimming pool water. Powdered activated carbon
  • BS EN 15850:2010 Foodstuffs. Determination of zearalenone in maize based baby food, barley flour, maize flour, polenta, wheat flour and cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection
  • BS EN 15851:2010 Foodstuffs. Determination of aflatoxin B1 in cereal based foods for infants and young children. HPLC method with immunoaffinity column cleanup and fluorescence detection
  • BS EN ISO/IEC 17043:2010 Conformity assessment. General requirements for proficiency testing
    Supersedes PD 6644-1:1999 and PD 6644-2:1999
  • BS EN ISO 17201-3:2010 Acoustics. Noise from shooting ranges. Guidelines for sound propagation calculations
  • BS EN ISO 17201-5:2010 Acoustics. Noise from shooting ranges. Noise management
  • BS EN ISO 21809-5:2010 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. External concrete coatings
  • BS EN ISO 27107:2010 Animal and vegetable fats and oils. Determination of peroxide value. Potentiometric end-point determination
    Supersedes BS EN ISO 27107:2008
  • BS EN 50132-1:2010 Alarm systems. CCTV surveillance systems for use in security applications. System requirements
  • BS EN 50519:2010 Assessment of workers' exposure to electric and magnetic fields of industrial induction heating equipment
  • BS EN 55016-1-1:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Measuring apparatus
    Supersedes BS EN 55016-1-1:2007+A2:2008 which remains current
  • BS EN 60191-6:2009 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages
    Supersedes BS EN 60191-6:2004
  • BS EN 60191-6-18:2010 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for ball grid array (BGA)
  • BS EN 60282-1:2009 High-voltage fuses. Current-limiting fuses
    Supersedes BS EN 60282-1:2006
  • BS EN 60335-2-4:2010 Household and similar electrical appliances. Safety. Particular requirements for spin extractors
    Supersedes BS EN 60335-2-4:2002 which remains current
  • BS EN 60335-2-7:2010 Household and similar electrical appliances. Safety. Particular requirements for washing machines
    Supersedes BS EN 60335-2-7:2003+A2:2006 which remains current
  • BS EN 60335-2-89:2010 Household and similar electrical appliances. Safety. Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
    Supersedes BS EN 60335-2-89:2002 which remains current
  • BS EN 60704-1:2010 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. General requirements
    Supersedes BS EN 60704-1:1997 which remains current
  • BS EN 60728-7-3:2009 Cable networks for television signals, sound signals and interactive services. Hybrid fibre coax outside plant status monitoring. Power supply to transponder interface bus (PSTIB)
    Supersedes BS EN 60728-7-3:2005
  • BS EN 60745-2-4:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for sanders and polishers other than disk type
    Supersedes BS EN 60745-2-4:2003+A1:2009 which remains current
  • BS EN 60904-10:2010 Photovoltaic devices. Methods of linearity measurement
    Supersedes BS EN 60904-10:1998
  • BS EN 60909-3:2010 Short-circuit currents in three-phase A.C systems. Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through Earth
    Supersedes BS EN 60909-3:2003
  • BS EN 60974-9:2010 Arc welding equipment. Installation and use
    Supersedes DD CLC/TS 62081:2002
  • BS EN 61000-4-8:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test
    Supersedes BS EN 61000-4-8:1994 which remains current
  • BS EN 61097-14:2010 Global maritime distress and safety system (GMDSS). AIS search and rescue transmitter (AIS-SART). Operational and performance requirements, methods of testing and required test results
  • BS EN 61300-2-1:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Vibration (sinusoidal)
    Supersedes BS EN 61300-2-1:2003
  • BS EN 61935-1:2009 Specification for the testing of balanced and coaxial information technology cabling. Installed balanced cabling as specified in the standards series EN 50173
    Supersedes BS EN 61935-1:2005
  • BS EN 61935-2-20:2009 Testing of balanced communication cabling in accordance with series EN 50173. Patch cords and work area cords. Blank detail specification for class D applications
  • BS EN 61935-3:2009 Testing of balanced and coaxial information technology cabling. Installed cabling as specified in EN 50173-4 and related standards
  • BS EN 61978-1:2010 Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators. Generic specification
    Supersedes BS EN 61978-1:2001
  • BS EN 62047-6:2010 Semiconductor devices. Micro-electromechanical devices. Axial fatigue testing methods of thin film materials
  • BS EN 62106:2009 Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz
    Supersedes BS EN 62106:2001
  • BS EN 62365:2009 Digital audio. Digital input-output interfacing. Transmission of digital audio over asynchronous transfer mode (ATM) networks
    Supersedes BS EN 62365:2005
  • BS EN 62546:2009 High Definition (HD) recording link guidelines
  • BS EN 80601-2-59:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening

BS ENs implemented by amendment

  • BS EN ISO 7540:2010 Ground paprika (Capsicum annuum L.). Specification
    Implementation of European Standard EN ISO 7540 by amendment to BS ISO 7540:2006
  • BS EN ISO 8589:2010 Sensory analysis. General guidance for the design of test rooms
    Implementation of European Standard EN ISO 8589 by amendment to BS ISO 8589:2007
  • BS EN ISO 10399:2010 Sensory analysis. Methodology. Duo-trio test
    Implementation of European Standard EN ISO 10399 by amendment to BS ISO 10399:2004
  • BS EN ISO 13299:2010 Sensory analysis. Methodology. General guidance for establishing a sensory profile
    Implementation of European Standard EN ISO 13299 by amendment to BS ISO 13299:2003
  • BS EN ISO 15544:2010 Petroleum and natural gas industries. Offshore production installations. Requirements and guidelines for emergency response
    Implementation of European Standard EN ISO 15544 by amendment to BS ISO 15544:2000

BS implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 2023:1994 Rubber footwear. Lined industrial vulcanized rubber boots. Specification
  • BS ISO 2135:2010 Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
    Supersedes BS 6161-7:1984
  • BS ISO 4000-1:2010 Passenger car tyres and rims. Tyres (metric series)
    Supersedes BS ISO 4000-1:2007
  • BS ISO 4866:2010 Mechanical vibration and shock. Vibration of fixed structures. Guidelines for the measurement of vibrations and evaluation of their effects on structures
    Supersedes BS 7385-1:1990
  • BS ISO 4986:2010 Steel castings. Magnetic particle inspection
  • BS ISO 4987:2010 Steel castings. Liquid penetrant inspection
  • BS ISO 5536:2009 Milk fat products. Determination of water content. Karl Fischer method
    Supersedes BS ISO 5536:2002
  • BS ISO 8709:2010 Mopeds. Brakes and brake systems. Tests and measurement methods
  • BS ISO 8710:2010 Motorcycles. Brakes and brake systems. Tests and measurement methods
  • BS ISO 10216:2010 Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method
  • BS ISO 11277:2009 Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
    Supersedes BS 7755-5.4:1998
  • BS ISO 11664-4:2008 Colorimetry. CIE 1976 L*a*b* Colour space
  • BS ISO 11664-5:2009 Colorimetry. CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram
  • BS ISO 14715:2010 Oil of thyme containing thymol, Spanish type [Thymus zygis (Loefl.) L.]
  • BS ISO 16750-4:2010 Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Climatic loads
    Supersedes BS ISO 16750-4:2006
  • BS ISO 16750-5:2010 Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Chemical loads
  • BS ISO 17267:2009 Intelligent transport systems. Navigation systems. Application programming interface (API)
  • BS ISO 22394:2010 Hardmetals. Knoop hardness test
  • BS ISO 23794:2010 Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
    Supersedes BS ISO 23794:2003
  • BS ISO 25111:2009 Intelligent transport systems. Communications access for land mobiles (CALM). General requirements for using public networks
  • BS ISO 25112:2010 Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using IEEE 802.16
  • BS ISO 25113:2010 Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using HC-SDMA
  • BS ISO 27727:2008 Rubber, vulcanized. Measurement of fatigue crack growth rate
  • BS ISO 28078-1:2009 Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials. Designation system and basis for specifications
  • BS ISO 29581-2:2010 Cement. Test methods. Chemical analysis by X-ray fluorescence
  • BS IEC 60747-14-1:2010 Semiconductor devices. Semiconductor sensors. Generic specification for sensors
    Supersedes BS IEC 60747-14-1:2000
  • BS IEC 60747-14-5:2010 Semiconductor devices. Semiconductor sensors. PN-junction semiconductor temperature sensor

Published documents

  • PD 6662:2010 Scheme for the application of European standards for intrusion and hold-up alarm systems
    Supersedes PD 6662:2004+A2:2006 which remains current
  • PD CEN/TR 15932:2010 Plastics. Recommendation for terminology and characterisation of biopolymers and bioplastics
  • PD ISO/IEC TR 19791:2010 Information technology. Security techniques. Security assessment of operational systems
    Supersedes PD ISO/IEC TR 19791:2006
  • PD ISO/IEC TR 29794-4:2010 Information technology. Biometric sample quality. Finger image data
  • PD ISO/TR 29944:2010 Powered industrial trucks and tractors. Brake performance. Determination of measurement procedures
  • PD IEC/TR 61491:2010 Electrical equipment of industrial machines. Serial data link for real-time communication between controls and drives
    Supersedes BS EN 61491:1999 which remains current
  • PD IEC/TR 61850-90-1:2010 Communication networks and systems for power utility automation. Use of IEC 61850 for the communication between substations

Publicly available specifications

Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

  • PAS 150:2010 Providing rehabilitation services. Code of practice
  • PAS 2060:2010 Specification for the demonstration of carbon neutrality

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 4211:2005+A1:2008 Specification for permanently fixed ladders
    CORRIGENDUM 2
  • BS EN 115-1:2008+A1:2010 Safety of escalators and moving walks. Construction and installation
    AMENDMENT 1
  • BS EN 454:2000+A1:2009 Food processing machinery. Planetary mixers. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 590:2009+A1:2010 Automotive fuels. Diesel. Requirements and test methods
    AMENDMENT 1
  • BS EN 690:1994+A1:2009 Agricultural machinery. Manure spreaders. Safety
    AMENDMENT 1
  • BS EN 707:1999+A1:2009 Agricultural machinery. Slurry tankers. Safety
    AMENDMENT 1
  • BS EN 794-1:1997+A2:2009 (BS 5724-2.202:1997+A2:2009) Lung ventilators. Particular requirements for critical care ventilators
    AMENDMENT 2
  • BS EN 848-1:2007+A1:2009 Safety of woodworking machines. One side moulding machines with rotating tool. Single spindle vertical moulding machines
    AMENDMENT 1
  • BS EN ISO 945-1:2008 Microstructure of cast irons. Graphite classification by visual analysis
    CORRIGENDUM 1
  • BS EN 1459:1998+A2:2010 Safety of industrial trucks. Self-propelled variable reach trucks
    AMENDMENT 2
  • BS EN 1568-1:2008 Fire extinguishing media. Foam concentrates. Specification for medium expansion foam concentrates for surface application to water-immiscible liquids
    CORRIGENDUM 1
  • BS EN 1568-2:2008 Fire extinguishing media. Foam concentrates. Specification for high expansion foam concentrates for surface application to water-immiscible liquids
    CORRIGENDUM 1
  • BS EN 1568-3:2008 Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to water-immiscible liquids
    CORRIGENDUM 1
  • BS EN 1568-4:2008 Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to water-miscible liquids
    CORRIGENDUM 1
  • BS EN 1804-1:2001+A1:2010 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Support units and general requirements
    AMENDMENT 1
  • BS EN 1804-2:2001+A1:2010 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Power set legs and rams
    AMENDMENT 1
  • BS EN 1804-3:2006+A1:2010 Machines for underground mines. Safety requirements for hydraulic powered roof supports. Hydraulic control systems
    AMENDMENT 1
  • BS EN 1991-1-7:2006 Eurocode 1. Actions on structures. General actions. Accidental actions
    CORRIGENDUM 1
  • BS EN 1991-2:2003 Eurocode 1. Actions on structures. Traffic loads on bridges
    CORRIGENDUM 2
  • BS EN 1993-1-3:2006 Eurocode 3. Design of steel structures. General rules. Supplementary rules for cold-formed members and sheeting
    CORRIGENDUM 1
  • BS EN 1993-1-12:2007 Eurocode 3. Design of steel structures. Additional rules for the extension of EN 1993 up to steel grades S 700
    CORRIGENDUM 1
  • BS EN 1993-6:2007 Eurocode 3. Design of steel structures. Crane supporting structures
    CORRIGENDUM 1
  • BS EN 1998-2:2005+A1:2009 Eurocode 8. Design of structures for earthquake resistance. Bridges
    CORRIGENDUM 1
  • BS EN 1998-3:2005 Eurocode 8. Design of structures for earthquake resistance. Assessment and retrofitting of buildings
    CORRIGENDUM 1
  • BS EN ISO 2440:1999+A1:2010 Flexible and rigid cellular polymeric materials. Accelerated aging tests
    AMENDMENT 1
  • BS EN ISO 4892-2:2006+A1:2009 Plastics. Methods of exposure to laboratory light sources. Xenon-arc lamps
    AMENDMENT 1
  • BS EN ISO 7396-1:2007+A2:2010 Medical gas pipeline systems. Pipeline systems for compressed medical gases and vacuum
    AMENDMENT 2
  • BS EN ISO 7500-1:2004 Metallic materials. Verification of static uniaxial testing machines. Tension/compression testing machines. Verification and calibration of the force-measuring system
    CORRIGENDUM 1
  • BS EN ISO 7540:2010 Ground paprika (Capsicum annuum L.). Specification
    CORRIGENDUM 2
  • BS EN ISO 8589:2010 Sensory analysis. General guidance for the design of test rooms
    CORRIGENDUM 1
  • BS EN ISO 8655-1:2002 Piston-operated volumetric apparatus. Terminology, general requirements and user recommendations
    CORRIGENDUM 1
  • BS EN ISO 9342-2:2005 Optics and optical instruments. Test lenses for calibration of focimeters. Test lenses for focimeters used for measuring contact lenses
    CORRIGENDUM 1
  • BS EN ISO 10399:2010 Sensory analysis. Methodology. Duo-trio test
    CORRIGENDUM 1
  • BS EN ISO 10554:2009 Polyamide fibre ropes. Double braid construction
    CORRIGENDUM 1
  • BS EN ISO 10993-1:June 2009 Biological evaluation of medical devices. Evaluation and testing
    CORRIGENDUM 1
  • BS EN ISO 10993-9:May 2009 Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products
    CORRIGENDUM 1
  • BS EN ISO 11161:2007+A1:2010 Safety of machinery. Integrated manufacturing systems. Basic requirements
    AMENDMENT 1
  • BS EN 12373-4:1998 Aluminium and aluminium alloys. Anodizing. Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye spot test with prior acid treatment
    CORRIGENDUM 1
  • BS EN 12417:2001+A2:2009 Machine tools. Safety. Machining centres
    CORRIGENDUM 1
  • BS EN 12525:2000+A2:2010 Agricultural machinery. Front loaders. Safety
    AMENDMENT 2
  • BS EN 12600:2002 Glass in building. Pendulum test. Impact test method and classification for flat glass
    CORRIGENDUM 1
  • BS EN 12851:2005+A1:2010 Food processing machinery. Catering attachments for machines having an auxiliary drive hub. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 12854:2003+A1:2010 Food processing machinery. Beam mixers. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 12911:2006 Products used for treatment of water intended for human consumption. Manganese greensand
    CORRIGENDUM 2
  • BS EN 13023:2003+A1:2010 Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment. Accuracy grades 2 and 3
    AMENDMENT 1
  • BS EN 13035-9:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Washing installations
    AMENDMENT 1
  • BS EN 13035-11:2006+A1:2010 Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Drilling machines
    AMENDMENT 1
  • BS EN 13042-1:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Gob feeder
    AMENDMENT 1
  • BS EN 13128:2001+A2:2009 Safety of machine tools. Milling machines (including boring machines)
    AMENDMENT 2
  • BS EN 13288:2005+A1:2009 Food processing machinery. Bowl lifting and tilting machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN ISO 13299:2010 Sensory analysis. Methodology. General guidance for establishing a sensory profile
    CORRIGENDUM 1
  • BS EN 13367:2005+A1:2008 Ceramic machines. Safety. Transfer platforms and cars
    AMENDMENT 1
  • BS EN 13389:2005+A1:2009 Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 13390:2002+A1:2009 Food processing machinery. Pie and tart machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 13544-1:2007+A1:2009 Respiratory therapy equipment. Nebulizing systems and their components
    AMENDMENT 1
  • BS EN 13565-2:2009 Fixed firefighting systems. Foam systems. Design, construction and maintenance
    CORRIGENDUM 2
  • BS EN 13591:2005+A1:2009 Food processing machinery. Fixed deck oven loaders. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 13683:2003+A1:2009 Garden equipment. Integrally powered shredders/chippers. Safety
    AMENDMENT 1
  • BS EN 13693:2004+A1:2009 Precast concrete products. Special roof elements
    AMENDMENT 1
  • BS EN 13954:2005+A1:2010 Food processing machinery. Bread slicers. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 14078:2009 (BS 2000-579:2009) Liquid petroleum products. Determination of fatty acid methyl ester (FAME) content in middle distillates. Infrared spectrometry method
    CORRIGENDUM 1
  • BS EN 14238:2004+A1:2009 Cranes. Manually controlled load manipulating devices
    AMENDMENT 1
  • BS EN 14343:2005 Rotary positive displacement pumps. Performance tests for acceptance
    CORRIGENDUM 1
  • BS EN 14353:2007+A1:2010 Metal beads and feature profiles for use with gypsum plasterboards. Definitions, requirements and test methods
    AMENDMENT 1
  • BS EN 14439:2006+A2:2009 Cranes. Safety. Tower cranes
    AMENDMENT 2
  • BS EN 14655:2005+A1:2010 Food processing machinery. Baguette slicers. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 14658:2005+A1:2010 Continuous handling equipment and systems. General safety requirements for continuous handling equipment for opencast lignite mining
    AMENDMENT 1
  • BS EN ISO 14713-3:2009 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Sherardizing
    CORRIGENDUM 1
  • BS EN 14844:2006+A1:2008 Precast concrete products. Box culverts
    AMENDMENT 1
  • BS EN ISO 14855-1:2007 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide. General method
    CORRIGENDUM 1
  • BS EN 14957:2006+A1:2010 Food processing machinery. Dishwashing machines with conveyor. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 15338:2007+A1:2010 Hardware for furniture. Strength and durability of extension elements and their components
    AMENDMENT 1
  • BS EN ISO 15544:2010 Petroleum and natural gas industries. Offshore production installations. Requirements and guidelines for emergency response
    CORRIGENDUM 1
  • BS EN ISO 15548-1:2008 Non-destructive testing. Equipment for eddy current examination. Instrument characteristics and verification
    CORRIGENDUM 1
  • BS EN 15663:2009 Railway applications. Definition of vehicle reference masses
    CORRIGENDUM 1
  • DD CEN/TS 15963:2010 (BS 2000-584:2010) Bitumen and bituminous binders. Determination of the fracture toughness temperature by a three point bending test on a notched specimen
    CORRIGENDUM 1
  • BS EN ISO 16409:2006+A1:2010 Dentistry. Oral hygiene products. Manual interdental brushes
    AMENDMENT 1
  • BS EN ISO 16484-5:2008+A1:2009 Building automation and control systems. Data communication protocol
    AMENDMENT 1
  • BS EN ISO 17078-1:2004+A1:2010 Petroleum and natural gas industries. Drilling and production equipment. Side-pocket mandrels
    AMENDMENT 1
  • BS EN ISO 17234-1:2010 Leather. Chemical tests for the determination of certain azo colorants in dyed leathers. Determination of certain aromatic amines derived from azo colorants
    CORRIGENDUM 1
  • DD CEN ISO/TS 22367:2010 Medical laboratories. Reduction of error through risk management and continual improvement
    CORRIGENDUM 2
  • BS EN ISO 26782:2009 Anaesthetic and respiratory equipment. Spirometers intended for the measurement of time forced expired volumes in humans
    CORRIGENDUM 1
  • BS EN ISO 28199-1:2009 Paints and varnishes. Evaluation of properties of coating systems related to the application process. Relevant vocabulary and preparation of test panels
    CORRIGENDUM 1
  • BS EN 50164-3:2006+A1:2009 Lightning protection components (LPC). Requirements for isolating spark gaps
    AMENDMENT 1
  • BS EN 50341-1:2001+A1:2009 Overhead electrical lines exceeding AC 45 kV. General requirements. Common specifications
    AMENDMENT 1
  • BS EN 50341-3:2001 Overhead electrical lines exceeding AC 45 kV. Set of National Normative Aspects
    CORRIGENDUM 3
  • BS EN 55016-1-2:2004+A2:2006 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Ancillary equipment. Conducted disturbances
    CORRIGENDUM 1
  • BS EN 60064:1995+A5:2009 Tungsten filament lamps for domestic and similar general lighting purposes. Performance requirements
    AMENDMENT 5
  • BS EN 60071-1:2006+A1:2010 Insulation co-ordination. Definitions, principles and rules
    AMENDMENT 1
  • BS EN 60172:1994+A2:2010 Test procedure for the determination of the temperature index of enamelled winding wires
    AMENDMENT 2
  • BS EN 60317-15:2004+A1:2010 Specifications for particular types of winding wires. Polyesterimide enamelled round aluminium wire, class 180
    AMENDMENT 1
  • BS EN 60317-18:2004+A1:2010 Specifications for particular types of winding wires. Polyvinyl acetal enamelled rectangular copper wire, class 120
    AMENDMENT 1
  • BS EN 60317-22:2004+A1:2010 Specifications for particular types of winding wires. Polyester or polyesterimide enameled round copper wire overcoated with polyamide, class 180
    AMENDMENT 1
  • BS EN 60335-2-6:2003+A2:2008 Household and similar electrical appliances. Safety. Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances
    CORRIGENDUM 2
  • BS EN 60335-2-30:2009 Household and similar electrical appliances. Safety. Particular requirements for room heaters
    CORRIGENDUM 1
  • BS EN 60335-2-59:2003+A2:2009 Household and similar electrical appliances. Safety. Particular requirements for insect killers
    AMENDMENT 2
  • BS EN 60335-2-73:2003+A2:2009 Household and similar electrical appliances. Safety. Particular requirements for fixed immersion heaters
    AMENDMENT 2
  • BS EN 60335-2-74:2003+A2:2009 Household and similar electrical appliances. Safety. Particular requirements for portable immersion heaters
    AMENDMENT 2
  • BS EN 60335-2-97:2006+A2:2010 Household and similar electrical appliances. Safety. Particular requirements for drives for rolling shutters, awnings, blinds and similar equipment
    AMENDMENT 2
  • BS EN 60335-2-102:2006+A1:2010 Household and similar electrical appliances. Safety. Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
    AMENDMENT 1
  • BS EN 60384-4-1:2007 Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed aluminium electrolytic capacitors with non-solid electrolyte. Assessment level EZ
    CORRIGENDUM 2
  • BS EN 60601-2-54:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of X-ray equipment for radiography and radioscopy
    CORRIGENDUM 1
  • BS EN 60670-1:2005 Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. General requirements
    CORRIGENDUM 2
  • BS EN 60745-2-3:2007 Hand-held motor-operated electric tools. Safety. Particular requirements for grinders, polishers and disk-type sanders
    AMENDMENT 11
  • BS EN 60838-1:2004+A1:2008 Miscellaneous lampholders. General requirements and tests
    AMENDMENT 1
  • BS EN 60851-1:1996+A2:2009 Winding wires. Test methods. General
    AMENDMENT 2
  • BS EN 60950-1:2006+A1:2010 Information technology equipment. Safety. General requirements
    AMENDMENT 1
  • BS EN 61280-2-3:2009 Fibre optic communication subsystem test procedures. Digital systems. Jitter and wander measurements
    CORRIGENDUM 1
  • BS EN 61496-1:2004+A1:2008 Safety of machinery. Electro-sensitive protective equipment. General requirements and tests
    CORRIGENDUM 1
  • BS EN 61810-1:2008 Electromechanical elementary relays. General requirements
    CORRIGENDUM 1
  • BS ISO 1436:2009 Rubber hoses and hose assemblies. Wire-braid reinforced hydraulic types for oil-based or water-based fluids. Specification
    CORRIGENDUM 1
  • BS ISO 1438:2008 Hydrometry. Open channel flow measurement using thin-plate weirs
    CORRIGENDUM 1
  • BS ISO 2575:2004+A4:2009 Road vehicles. Symbols for controls, indicators and tell-tales
    AMENDMENT 4
  • BS ISO/IEC 9798-2:2008 Information technology. Security techniques. Entity authentication. Mechanisms using symmetric encipherment algorithms
    CORRIGENDUM 1
  • BS ISO/IEC 10373-6:2001+A7:2010 Identification cards. Test methods. Proximity cards
    AMENDMENT 7
  • BS ISO 10605:2008 Road vehicles. Test methods for electrical disturbances from electrostatic discharge
    CORRIGENDUM 1
  • BS ISO 12256:2002 Aerospace. Drives, internal, cruciform, ribbed. Metric series
    CORRIGENDUM 1
  • BS ISO 12917-1:2002 Petroleum and liquid petroleum products. Calibration of horizontal cylindrical tanks. Manual methods
    CORRIGENDUM 1
  • BS ISO 14853:2005 Plastics. Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system. Method by measurement of biogas production
    CORRIGENDUM 1
  • BS ISO 15242-2:2004 Rolling bearings. Measuring methods for vibration. Radial ball bearings with cylindrical bore and outside surface
    CORRIGENDUM 1
  • BS ISO 15242-3:2006 Rolling bearings. Measuring methods for vibration. Radial spherical and tapered roller bearings with cylindrical bore and outside surface
    CORRIGENDUM 1
  • BS ISO 28741:2009 Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions
    CORRIGENDUM 1
  • DD IEC/TS 62239:2008 Process management for avionics. Preparation of an electronic components management plan
    CORRIGENDUM 1
  • PAS 66:2009 Official identification eartags for sheep and goats. Specification
    CORRIGENDUM 1

British Standards withdrawn

  • BS 5266-3:1981 Emergency lighting. Specification for small power relays (electromagnetic) for emergency lighting applications up to and including 32 A
    This standard is withdrawn as it is no longer used as most products now use electronic switching
  • BS 5306-6.1:1988 Fire extinguishing installations and equipment on premises. Foam systems. Specification for low expansion foam systems
    Superseded by BS EN 13565-2:2009
  • BS 5306-6.2:1989 Fire extinguishing installations and equipment on premises. Foam systems. Specification for medium and high expansion foam systems
    Superseded by BS EN 13565-2:2009
  • BS 6069-3.1:1989 Characterization of air quality. Workplace atmospheres. Method for the determination of vinyl chloride using a charcoal tube and a gas chromatograph
    This standard is withdrawn as it conflicts with BS ISO 16200-1:2001
  • BS 6089:1981 Guide to assessment of concrete strength in existing structures
    Superseded by BS 6089:2010 and BS EN 13791:2007
  • BS 6161-7:1984 Methods of test for anodic oxidation coatings on aluminium and its alloys. Accelerated determination of light fastness of coloured anodic oxidation coatings using artificial light
    Superseded by BS ISO 2135:2010
  • BS 7385-1:1990 Evaluation and measurement for vibration in buildings. Guide for measurement of vibrations and evaluation of their effects on buildings
    Superseded by BS ISO 4866:2010
  • BS 7755-5.4:1998 Soil quality. Physical methods. Method by sieving and sedimentation
    Superseded by BS ISO 11277:2009
  • BS 8110-1:1997 Structural use of concrete. Code of practice for design and construction
    Superseded by BS EN 1992-1-1:2004
  • BS 8110-2:1985 Structural use of concrete. Code of practice for special circumstances
    Superseded by BS EN 1992-1-1:2004
  • BS 8110-3:1985 Structural use of concrete. Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns
    Superseded by BS EN 1992-1-1:2004
  • BS EN 559:2003 Gas welding equipment. Rubber hoses for welding, cutting and allied processes
    Superseded by BS EN ISO 3821:2010
  • BS EN 562:2003 Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
    Superseded by BS EN ISO 5171:2010
  • BS EN 910:1996 Destructive tests on welds in metallic materials. Bend tests
    Superseded by BS EN ISO 5173:2010
  • BS EN ISO 1517:1995 (BS 3900-C2:1994) Paints and varnishes. Surface-drying test. Ballotini method
    Superseded by BS EN ISO 9117-3:2010
  • BS EN ISO 4622:1995 (BS 3900-C7:1993) Paints and varnishes. Pressure test for stackability
    Superseded by BS EN ISO 9117-2:2010
  • BS EN 12663:2000 Railway applications. Structural requirements of railway vehicle bodies
    Superseded by BS EN 12663-1:2010 and BS EN 12663-2:2010
  • BS EN 14685:2004 Polyamide fibre ropes. Double braid construction
    Superseded by BS EN ISO 10554:2009
  • BS EN 20286-1:1993 ISO system of limits and fits. ISO system of limits and fits. Bases of tolerances, deviations and fits
    Superseded by BS EN ISO 286-1:2010
  • BS EN 50229:2001 Electric clothes washer-dryers for household use. Methods of measuring the performance
    Superseded by BS EN 50229:2007
  • BS EN 60335-2-60:1991 Specification for safety of household and similar electrical appliances. Particular requirements. Whirlpool baths and similar equipment
    Superseded by BS EN 60335-2-60:1998
  • BS EN 60704-1:1995 Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. General requirements
    Superseded by BS EN 60704-1:1997
  • BS EN 60898-2:2001 Circuit-breakers for overcurrent protection for household and similar installations. Circuit breakers for A.C. and D.C. operation
    Superseded by BS EN 60898-2:2006
  • DD CLC/TS 62081:2002 Arc welding equipment. Installation and use
    Superseded by BS EN 60974-9:2010
  • PD ISO/TS 12029:2002 Electronic imaging. Forms design optimization for electronic image management
    This document has been withdrawn as it has been Superseded but the new version will not be implemented by BSI
  • BS ISO 22900-3:2009 Road vehicles. Modular vehicle communication interface (MVCI). Diagnostic server application programming interface (D-Server API)
    This standard has been withdrawn as the International Standard has now been withdrawn by ISO
  • PD 6644-1:1999 Proficiency testing by interlaboratory comparisons. Development and operation of proficiency testing schemes
    Superseded by BS EN ISO/IEC 17043:2010
  • PD 6644-2:1999 Proficiency testing by interlaboratory comparisons. Selection and use of proficiency testing schemes by laboratory accreditation bodies
    Superseded by BS EN ISO/IEC 17043:2010

Published in international.