ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
    Revised to A194/A194M-10
  • A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
    Revised to A213/A213M-10
  • A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    Revised to A240/A240M-10
  • A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
    Revised to A249/A249M-10
  • A250/A250M Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes
    Reapproved, available as A250/A250M-05(2009)
  • A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
    Revised to A262-10
  • A268/A268M Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
    Revised to A268/A268M-10
  • A269 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
    Revised to A269-10
  • A270/A270M Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
    Revised (with designation change) to A270/A270M-10
  • A313/A313M Standard Specification for Stainless Steel Spring Wire
    Revised to A313/A313M-10
  • A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
    Revised to A333/A333M-10
  • A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
    Revised to A335/A335M-10
  • A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
    Revised to A351/A351M-10
  • A388/A388M Standard Practice for Ultrasonic Examination of Steel Forgings
    Revised to A388/A388M-10
  • A414/A414M Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
    Revised (with title change) to A414/A414M-10
  • A427/A427M Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
    Revised (with designation change) to A427/A427M-10
  • A437/A437M Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
    Revised (with title change) to A437/A437M-10
  • A453/A453M Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
    Revised (with title change) to A453/A453M-10
  • A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
    Revised to A479/A479M-10
  • A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
    Revised to A480/A480M-10
  • A488/A488M Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
    Revised to A488/A488M-10
  • A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
    Revised to A500/A500M-10
  • A507 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
    Revised to A507-10
  • A532/A532M Standard Specification for Abrasion-Resistant Cast Irons
    Revised to A532/A532M-10
  • A540/A540M Standard Specification for Alloy-Steel Bolting for Special Applications
    Revised (with title change) to A540/A540M-10
  • A554 Standard Specification for Welded Stainless Steel Mechanical Tubing
    Revised to A554-10
  • A632 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
    Reapproved, available as A632-04(2009)
  • A638/A638M Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
    Revised to A638/A638M-10
  • A649/A649M Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
    Revised to A649/A649M-10
  • A659/A659M Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
    Revised to A659/A659M-10
  • A671/A671M Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
    Revised (with designation change) to A671/A671M-10
  • A713 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
    Reapproved, available as A713-04(2010)
  • A752 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel
    Reapproved, available as A752-04(2010)
  • A752M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Alloy Steel [Metric]
    Reapproved, available as A752M-04(2010)
  • A799/A799M Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
    Revised to A799/A799M-10
  • A853 Standard Specification for Steel Wire, Carbon, for General Use
    Reapproved, available as A853-04(2010)
  • A890/A890M Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
    Revised to A890/A890M-10
  • A905 Standard Specification for Steel Wire, Pressure Vessel Winding
    Reapproved, available as A905-04(2010)
  • A941 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
    Revised to A941-10
  • A943/A943M Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
    Reapproved, available as A943/A943M-01(2009)
  • A949/A949M Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
    Reapproved, available as A949/A949M-01(2009)
  • A958/A958M Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
    Revised (with designation change) to A958/A958M-10
  • A990 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service
    Revised to A990-10
  • A991/A991M Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
    Revised to A991/A991M-10
  • A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
    Reapproved, available as A999/A999M-04a(2009)
  • A1002 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
    Revised to A1002-10
  • A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
    Revised to A1008/A1008M-10
  • A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
    Revised to A1011/A1011M-10
  • A1015 Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
    Reapproved, available as A1015-01(2009)
  • A1033 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
    Revised to A1033-10
  • A1040 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
    Revised to A1040-10
  • A1047/A1047M Standard Test Method for Pneumatic Leak Testing of Tubing
    Reapproved, available as A1047/A1047M-05(2009)
  • B23 Standard Specification for White Metal Bearing Alloys (Known Commercially as "Babbitt Metal")
    Reapproved, available as B23-00(2010)
  • B30 Standard Specification for Copper Alloys in Ingot Form
    Revised to B30-10
  • B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
    Revised (with title change) to B33-10
  • B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
    Revised to B86-10
  • B103/B103M Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar
    Revised to B103/B103M-10
  • B115 Standard Specification for Electrolytic Copper Cathode
    Revised to B115-10
  • B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
    Revised to B124/B124M-10
  • B237 Standard Specification for Refined Antimony
    Reapproved, available as B237-01(2010)
  • B240 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
    Revised to B240-10
  • B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
    Revised to B249/B249M-10
  • B271 Standard Specification for Copper-Base Alloy Centrifugal Castings
    Editorially changed, available as B271-08e1
  • B283 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
    Revised to B283-10
  • B339 Standard Specification for Pig Tin
    Reapproved, available as B339-00(2009)
  • B366 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
    Revised to B366-10
  • B422 Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip
    Revised to B422-10
  • B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
    Revised to B455-10
  • B501 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
    Revised to B501-10
  • B502 Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors
    Revised (with title change) to B502-10
  • B505/B505M Standard Specification for Copper Alloy Continuous Castings
    Revised to B505/B505M-10
  • B549 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors
    Revised (with title change) to B549-10
  • B560 Standard Specification for Modern Pewter Alloys
    Reapproved, available as B560-00(2010)
  • B614 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces
    Revised to B614-10
  • B694 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
    Revised to B694-10
  • B737 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire
    Revised to B737-10
  • B770 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications
    Revised to B770-10
  • B774 Standard Specification for Low Melting Point Alloys
    Reapproved, available as B774-00(2010)
  • B888 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
    Revised to B888-10
  • B892 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy in Ingot Form for Die Castings
    Revised to B892-10
  • B894 Standard Specification for ACuZinc5 (Zinc-Copper-Aluminum) Alloy Die Castings
    Revised to B894-10
  • B897 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo Block and Half Block Ingot
    Revised to B897-10
  • B899 Standard Terminology Relating to Non-ferrous Metals and Alloys
    Editorially changed, available as B899-09e1
  • B938 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions (UNS Nos. C17500 and C17510)
    Withdrawn 2010 and replaced by B938-04
  • B967/B967M Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire
    Revised to B967/B967M-10
  • B968/B968M Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
    Revised to B968/B968M-10
  • B971-10 Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
    New standard
  • B972-10 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
    New standard
  • B973-10 Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
    New standard
  • C10/C10M Standard Specification for Natural Cement
    Revised to C10/C10M-10
  • C76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
    Revised to C76-10a
  • C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
    Revised to C76M-10a
  • C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement
    Revised to C114-10
  • C115 Standard Test Method for Fineness of Portland Cement by the Turbidimeter
    Revised to C115-10
  • C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
    Revised to C227-10
  • C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete
    Revised to C387/C387M-10
  • C457/C457M Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
    Revised (with designation change) to C457/C457M-10
  • C506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
    Revised to C506-10a
  • C506M Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
    Revised to C506M-10a
  • C507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
    Revised to C507-10a
  • C507M Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
    Revised to C507M-10a
  • C583 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
    Revised to C583-10
  • C595/C595M Standard Specification for Blended Hydraulic Cements
    Revised to C595/C595M-10
  • C957/C957M Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
    Revised (with designation change) to C957/C957M-10
  • C1077 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
    Revised to C1077-10
  • C1077 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
    Revised to C1077-10a
  • C1084 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
    Revised to C1084-10
  • C1157/C1157M Standard Performance Specification for Hydraulic Cement
    Revised to C1157/C1157M-10
  • C1227 Standard Specification for Precast Concrete Septic Tanks
    Revised to C1227-10
  • C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
    Editorially changed, available as C1427-07e1
  • C1534 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
    Editorially changed, available as C1534-07e1
  • C1543 Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding
    Revised to C1543-10
  • C1550 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
    Revised to C1550-10
  • C1601 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
    Revised to C1601-10
  • C1609/C1609M Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
    Revised to C1609/C1609M-10
  • C1715 Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
    Revised to C1715-10
  • D531 Standard Test Method for Rubber Property-Pusey and Jones Indentation
    Reapproved, available as D531-00(2010)
  • D814 Standard Test Method for Rubber Property- Vapor Transmission of Volatile Liquids
    Reapproved, available as D814-95(2010)
  • D991 Standard Test Method for Rubber Property-Volume Resistivity Of Electrically Conductive and Antistatic Products
    Reapproved, available as D991-89(2010)
  • D1456 Standard Test Method for Rubber Property—Elongation at Specific Stress
    Reapproved, available as D1456-86(2010)
  • D1460 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion
    Reapproved, available as D1460-86(2010)
  • D1655 Standard Specification for Aviation Turbine Fuels
    Revised to D1655-09a
  • D2063/D2063M Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures
    Revised (with title change) to D2063/D2063M-10
  • D2240 Standard Test Method for Rubber Property—Durometer Hardness
    Reapproved, available as D2240-05(2010)
  • D2322 Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
    Revised to D2322-10
  • D2625 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)
    Reapproved, available as D2625-94(2010)
  • D2647 Standard Specification for Crosslinkable Ethylene Plastics
    Revised to D2647-10
  • D2683 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
    Revised to D2683-10
  • D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
    Revised to D2937-10
  • D3032 Standard Test Methods for Hookup Wire Insulation
    Revised to D3032-10
  • D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure)
    Editorially changed, available as D3241-09e1
  • D3261 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
    Revised to D3261-10a
  • D3306 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
    Revised to D3306-10
  • D3802 Standard Test Method for Ball-Pan Hardness of Activated Carbon
    Revised to D3802-10
  • D3874 Standard Test Method for Ignition of Materials by Hot Wire Sources
    Revised to D3874-10
  • D3943 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts
    Revised to D3943-10
  • D4481 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts
    Revised to D4481-10
  • D4492 Standard Test Method for Analysis of Benzene by Gas Chromatography
    Revised to D4492-10
  • D4782 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry
    Revised to D4782-10
  • D4985 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
    Revised to D4985-10
  • D5139 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
    Reinstated as D5139-10
  • D5154 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
    Revised to D5154-10
  • D5261 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
    Revised to D5261-10
  • D5424 Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
    Revised to D5424-10
  • D5471 Standard Specification for O-Xylene 980
    Revised to D5471-10
  • D5485 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter
    Revised to D5485-10
  • D5537 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
    Revised to D5537-10
  • D5570/D5570M Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
    Revised (with designation change) to D5570/D5570M-10
  • D5617 Standard Test Method for Multi-Axial Tension Test for Geosynthetics
    Reapproved, available as D5617-04(2010)
  • D5746 Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
    Reapproved, available as D5746-98(2010)
  • D5752 Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
    Revised to D5752-10
  • D5884 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
    Reapproved, available as D5884-04a(2010)
  • D6077 Standard Test Method for Trapezoid Tearing Strength of Leather
    Revised to D6077-10
  • D6113 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables
    Revised to D6113-10
  • D6194 Standard Test Method for Glow-Wire Ignition of Materials
    Revised to D6194-10
  • D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems
    Editorially changed, available as D6469-08e1
  • D6471 Standard Specification for Recycled Prediluted Aqueous Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service
    Revised to D6471-10
  • D6472 Standard Specification for Recycled Glycol Base Engine Coolant Concentrate for Automobile and Light-Duty Service
    Revised to D6472-10
  • D6602 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
    Reapproved (with editorial change), available as D6602-03b(2010)e1
  • D6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
    Revised to D6637-10
  • D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
    Reapproved, available as D6693-04(2010)
  • D6746 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds
    Revised (with title change) to D6746-10
  • D6811 Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)
    Editorially changed, available as D6811-02(2007)e1
  • D7077-04 Standard Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions
    Withdrawn 2010 with no replacement
  • D7085 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
    Reapproved (with editorial change), available as D7085-04(2010)e1
  • D7096 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
    Revised to D7096-10
  • D7420-10 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
    New standard
  • D7518 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
    Revised to D7518-10
  • D7524-10 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
    New standard
  • D7565/D7565M Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
    Revised to D7565/D7565M-10
  • D7576-10 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography
    New standard
  • E131 Standard Terminology Relating to Molecular Spectroscopy
    Revised to E131-10
  • E261 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
    Revised to E261-10
  • E288 Standard Specification for Laboratory Glass Volumetric Flasks
    Revised to E288-10
  • E384 Standard Test Method for Knoop and Vickers Hardness of Materials
    Editorially changed, available as E384-10e2
  • E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness K Ic of Metallic Materials
    Editorially changed, available as E399-09e1
  • E456 Standard Terminology Relating to Quality and Statistics
    Editorially changed, available as E456-08e2
  • E473 Standard Terminology Relating to Thermal Analysis and Rheology
    Revised to E473-10
  • E481 Standard Test Method for Measuring Neutron Fluence Rate by Radioactivation of Cobalt and Silver
    Revised to E481-10
  • E503/E503M-88(2004) Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique
    Withdrawn 2010 with no replacement
  • E561 Standard Test Method forK-R Curve Determination
    Editorially changed, available as E561-08e1
  • E636 Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels, E 706 (IH)
    Revised to E636-10
  • E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates
    Editorially changed, available as E647-08e1
  • E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
    Revised to E648-10
  • E875 Standard Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry
    Revised to E875-10
  • E1153 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate Non-Food Contact Surfaces
    Reapproved (with editorial change), available as E1153-03(2010)e1
  • E1433 Standard Guide for Selection of Standards on Environmental Acoustics
    Withdrawn 2010 with no replacement
  • E1589 Standard Test Method for Evaluation of First Aid Antiseptic Drug Products
    Reapproved, available as E1589-05(2010)
  • E1681 Standard Test Method for Determining a Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
    Editorially changed, available as E1681-03(2008)e1
  • E1838 Standard Test Method for Determining the Virus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults
    Revised (with title change) to E1838-10
  • E1882 Standard Test Method for Evaluation of Antimicrobial Formulations by the Agar Patch Technique
    Revised to E1882-10
  • E1957 Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
    Reapproved, available as E1957-04(2010)
  • E2149 Standard Test Method for Determining the Antimicrobial Activity of Immobilized Antimicrobial Agents Under Dynamic Contact Conditions
    Reinstated as E2149-10
  • E2213 Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications
    Reapproved, available as E2213-03(2010)
  • E2276 Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults
    Revised (with title change) to E2276-10
  • E2325 Standard Guide for Non-destructive Examination of Paper
    Editorially changed, available as E2325-05e1
  • E2342 Standard Test Method for Durability Testing of Duct Sealants
    Revised to E2342-10
  • E2617 Standard Practice for Validation of Empirically Derived Multivariate Calibrations
    Revised to E2617-10
  • E2627-10 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
    New standard
  • E2748-10 Standard Guide for Fire-Resistance Experiments
    New standard
  • E2753-10 Standard Specification for Eretmocerus eremicus Rose and Zolnerowich (Hymenoptera: Aphelinidae)
    New standard
  • E2754-10 Standard Specification for Delphastus catalinae (Horn) (Coleoptera:Coccinellidae)
    New standard
  • F68 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices
    Revised to F68-10
  • F395 Standard Terminology Relating to Vacuum Cleaners
    Revised to F395-10
  • F457 Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
    Reapproved, available as F457-04(2010)
  • F477 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    Revised to F477-10
  • F610/F610M Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
    Revised to F610/F610M-10
  • F793 Standard Classification of Wall Covering by Use Characteristics
    Revised to F793-10
  • F811 Standard Practice for Accelerometer Use in Vehicles for Tire Testing
    Reapproved, available as F811-02(2010)
  • F819 Standard Terminology Relating to Electrical Protective Equipment for Workers
    Revised to F819-10
  • F833 Standard Consumer Safety Performance Specification for Carriages and Strollers
    Revised to F833-10
  • F914/F914M Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments
    Revised (with title change) to F914/F914M-10
  • F1141 Standard Specification for Wallcovering
    Revised to F1141-10
  • F1337 Standard Practice for Human Engineering Program Requirements for Ships and Marine Systems, Equipment, and Facilities
    Revised to F1337-10
  • F1364 Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
    Reapproved, available as F1364-03(2010)
  • F1430/F1430M Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments
    Revised (with designation change) to F1430/F1430M-10
  • F1737/F1737M Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems
    Revised (with designation change) to F1737/F1737M-10
  • F1738 Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
    Revised to F1738-10
  • F1750 Specification for Paintball Marker Threaded-Propellant Source Interface
    Reapproved, available as F1750-05(2010)
  • F1775-97(2004) Standard Specification for Labeling of Climbing and Mountaineering Equipment
    Withdrawn 2009 with no replacement
  • F1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
    Revised to F1869-10
  • F1877 Standard Practice for Characterization of Particles
    Editorially changed, available as F1877-05e1
  • F2097 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
    Revised to F2097-10
  • F2106 Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
    Reapproved, available as F2106-03(2010)
  • F2167 Standard Consumer Safety Specification for Infant Bouncer Seats
    Revised to F2167-10
  • F2194 Standard Consumer Safety Specification for Bassinets and Cradles
    Revised to F2194-10
  • F2277 Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
    Reapproved, available as F2277-03(2010)
  • F2438 Standard Specification for Oil Spill Response Boom Connection: Slide Connector
    Reapproved, available as F2438-04(2010)
  • F2640 Standard Consumer Safety Specification for Booster Seats
    Revised to F2640-10
  • F2686-10 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe
    New standard
  • F2764-10 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    New standard
  • F2764 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    Editorially changed, available as F2764-10e1
  • F2779-10 Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface
    New standard
  • F2823-10 Standard Guide for In-Situ Burning of Oil Spills in Marshes
    New standard
  • G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
    Reapproved, available as G3-89(2010)
  • G15 Standard Terminology Relating to Corrosion and Corrosion Testing
    Withdrawn and replaced by G15-08
  • G33 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
    Reapproved, available as G33-99(2010)
  • G56 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials
    Revised (with title change) to G56-10
  • G73 Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
    Revised (with title change) to G73-10
  • G77 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
    Reapproved, available as G77-05(2010)
  • G99 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
    Reapproved, available as G99-05(2010)
  • G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization
    Reapproved (with editorial change), available as G100-89(2010)e1
  • G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels
    Reapproved, available as G101-04(2010)
  • G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements
    Reapproved, available as G102-89(2010)
  • G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
    Reapproved, available as G106-89(2010)
  • G108 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
    Reapproved, available as G108-94(2010)
  • G116 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion
    Reapproved, available as G116-99(2010)
  • G121 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
    Reapproved (with editorial change), available as G121-98(2010)e1
  • G133 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear
    Reapproved, available as G133-05(2010)
  • G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels
    Reapproved, available as G150-99(2010)
  • G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
    Revised to G151-10
  • G163 Standard Guide for Digital Data Acquisition in Wear and Friction Measurements
    Revised to G163-10
  • G201-09 Standard Practice for Conducting Exposures in Outdoor Glass-Covered Exposure Apparatus with Air Circulation
    New standard
  • G203-10 Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
    New standard
  • G204-10 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
    New standard

Published in international.