ISO PUBLICATIONS

You can now purchase PDFs of ISO Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. ISO Standards in hard copy format are also available for purchase from our website www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

  • ISO 105-C08:2010 (Edition 2) Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator
  • ISO 369:2009 Machine tools. Symbols for indications appearing on machine tools
  • ISO 945-1:2008 Microstructure of cast irons. Graphite classification by visual analysis
    CORRIGENDUM 1:March 2010
  • ISO 1436:2009 Rubber hoses and hose assemblies. Wire-braid reinforced hydraulic types for oil-based or water-based fluids. Specification
    CORRIGENDUM 1:February 2010
  • ISO 2135:2010 (Edition 3) Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
  • ISO 2440:1997 Flexible and rigid cellular polymeric materials. Accelerated ageing tests
    AMENDMENT 1:February 2010
  • ISO 2871-1:2010 (Edition 2) Surface active agents. Detergents. Determination of cationic-active matter content. High-molecular-mass cationic-active matter
  • ISO 2871-2:2010 (Edition 2) Surface active agents. Detergents. Determination of cationic-active matter content. Cationic-active matter of low molecular mass (between 200 and 500)
  • ISO 2889:2010 (Edition 2) Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
  • ISO 3175-1:2010 (Edition 2) Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Assessment of performance after cleaning and finishing
  • ISO 3175-2:2010 (Edition 2) Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Procedure for testing performance when cleaning and finishing using tetrachloroethene
  • ISO 3924:2010 (Edition 3) Petroleum products. Determination of boiling range distribution. Gas chromatography method
  • ISO 4251-4:2010 (Edition 3) Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre classification and nomenclature
  • ISO 4395:2009 Fluid power systems and components. Cylinder piston rod end types and dimensions
    CORRIGENDUM 1:March 2010
  • ISO 4866:2010 (Edition 2) Mechanical vibration and shock. Vibration of fixed structures. Guidelines for the measurement of vibrations and evaluation of their effects on structures
  • ISO 4898:2010 (Edition 5) Rigid cellular plastics. Thermal insulation products for buildings. Specifications
  • ISO 7240-24:2010 Fire detection and fire alarm systems. Sound system loudspeakers
  • ISO/TR 7250-2:2010 Basic human body measurements for technological design. Statistical summaries of body measurements from individual ISO populations
  • ISO 7396-1:2007 Medical gas pipeline systems. Pipeline systems for compressed medical gases and vacuum
    AMENDMENT 1:January 2010
  • ISO 7885:2010 (Edition 3) Dentistry. Sterile injection needles for single use
  • ISO 8143:2010 Thermal insulation products for building equipment and industrial installations. Calcium silicate products
  • ISO 8779:2010 (Edition 3) Plastics piping systems. Polyethylene (PE) pipes for irrigation. Specifications
  • ISO 9117-2:2010 Paints and varnishes. Drying tests. Pressure test for stackability
  • ISO 9117-3:2010 Paints and varnishes. Drying tests. Surface drying test using ballotini
  • ISO/IEC 9594-2:2005 Information technology. Open Systems Interconnection. The Directory. Models
    CORRIGENDUM 2:February 2010
  • ISO/IEC 9798-2:2008 Information technology. Security techniques. Entity authentication. Mechanisms using symmetric encipherment algorithms
    CORRIGENDUM 1:February 2010
  • ISO 10191:2010 (Edition 3) Passenger car tyres. Verifying tyre capabilities. Laboratory test methods
  • ISO/TS 10272-3:2010 Microbiology of food and animal feeding stuffs. Horizontal method for detection and enumeration of Campylobacter spp. Semi-quantitative method
  • ISO 10545-16:2010 (Edition 2) Ceramic tiles. Determination of small colour differences
  • ISO 10579:2010 (Edition 2) Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
  • ISO 10605:2008 Road vehicles. Test methods for electrical disturbances from electrostatic discharge
    CORRIGENDUM 1:March 2010
  • ISO 10911:2010 (Edition 2) Solid hardmetal end mills with cylindrical shank. Dimensions
  • ISO 10993-7:2008 Biological evaluation of medical devices. Ethylene oxide sterilization residuals
    CORRIGENDUM 1:November 2009
  • ISO 10993-16:2010 (Edition 2) Biological evaluation of medical devices. Toxicokinetic study design for degradation products and leachables
  • ISO 11295:2010 Classification and information on design of plastics piping systems used for renovation
  • ISO 11298-1:2010 Plastics piping systems for renovation of underground water supply networks. General
  • ISO 11298-3:2010 Plastics piping systems for renovation of underground water supply networks. Lining with close-fit-pipes
  • ISO 11339:2010 (Edition 3) Adhesives. T-peel test for flexible-to-flexible bonded assemblies
  • ISO 11929:2010 Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation. Fundamentals and application
  • ISO/TR 12134:2010 Rubber. Estimation of uncertainty for test methods. Non-functional parameters
  • ISO/IEC 12139-1:2009 Information technology. Telecommunications and information exchange between systems. Powerline communication (PLC). High speed PLC medium access control (MAC) and physical layer (PHY). General requirements
    CORRIGENDUM 1:February 2010
  • ISO 12214:2010 (Edition 2) Road vehicles. Direction-of-motion stereotypes for automotive hand controls
  • ISO/TR 12603:2010 (Edition 2) Building construction machinery and equipment. Classification
  • ISO 12643-4:2010 Graphic technology. Safety requirements for graphic technology equipment and systems. Converting equipment and systems
  • ISO/TS 13141:2010 Electronic fee collection. Localisation augmentation communication for autonomous systems
  • ISO 13606-5:2010 Health informatics. Electronic health record communication. Interface specification
  • ISO/IEC 14165-133:2010 Information technology. Fibre channnel. Fibre channel switch fabric-3 (FC-SW-3)
  • ISO 14341:2010 (Edition 2) Welding consumables. Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels. Classification
  • ISO 14344:2010 (Edition 2) Welding consumables. Procurement of filler materials and fluxes
  • ISO 14419:2010 (Edition 2) Textiles. Oil repellency. Hydrocarbon resistance test
  • ISO 14436:2010 Pulps. Standard tap water for drainability measurements. Conductivity 40 mS/m to 150 mS/m
  • ISO/IEC 14496-4:2004 Information technology. Coding of audio-visual objects. Conformance testing
    CORRIGENDUM 7:February 2010
  • ISO/IEC 14543-5-1:2010 Information technology. Home electronic system (HES) architecture. Intelligent grouping and resource sharing for Class 2 and Class 3. Core protocol
  • ISO/IEC 14543-5-22:2010 Information technology. Home electronic system (HES) architecture. Intelligent grouping and resource sharing for HES Class 2 and Class 3. Application profile. File profile
  • ISO/IEC 14662:2010 (Edition 3) Information technology. Open-edi reference model
  • ISO 14708-6:2010 Implants for surgery. Active implantable medical devices. Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)
  • ISO 15370:2010 (Edition 2) Ships and marine technology. Low-location lighting (LLL) on passenger ships. Arrangement
  • ISO 15519-1:2010 Specification for diagrams for process industry. General rules
  • ISO 15548-1:2008 Non-destructive testing. Equipment for eddy current examination Instrument characteristics and verification
    CORRIGENDUM 1:March 2010
  • ISO/TS 15926-3:2009 (CD-ROM) Industrial automation systems and integration. Integration of life-cycle data for process plants including oil and gas production facilities. Reference data for geometry and topology
  • ISO/IEC 15938-12:2008 Information technology. Multimedia content description interface. Query format
    CORRIGENDUM 2:February 2010
  • ISO 16053:2010 (Edition 2) Paints and varnishes. Coating materials and coating systems for exterior wood. Natural weathering test
  • ISO 16110-2:2010 Hydrogen generators using fuel processing technologies. Test methods for performance
  • ISO 16312-1:2010 (Edition 2) Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment. Criteria
  • ISO 17054:2010 Routine method for analysis of high alloy steel by x-ray fluorescence spectrometry (XRF) by using a near-by technique
  • ISO 17234-1:2010 Leather. Chemical tests for the determination of certain azo colourants in dyed leathers. Determination of certain aromatic amines derived from azo colourants
  • ISO 17635:2010 (Edition 2) Non-destructive testing of welds. General rules for metallic materials
  • ISO 17678:2010 Milk and milk products. Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method)
  • ISO/IEC 18018:2010 Information technology. Systems and software engineering. Guide for configuration management tool capabilities
  • ISO 21072-3:2010 Ships and marine technology. Marine environment protection: performance testing of oil skimmers. High viscosity oil
  • ISO/TS 21547:2010 Health informatics. Security requirements for archiving of electronic health records. Principles
  • ISO 22745-1:2010 (CD-ROM) Industrial automation systems and integration. Open technical dictionaries and their application to master data. Overview and fundamental principles
  • ISO 22745-2:2010 (CD-ROM) Industrial automation systems and integration. Open technical dictionaries and their application to master data. Vocabulary
  • ISO 22745-11:2010 (CD-ROM) Industrial automation systems and integration. Open technical dictionaries and their application to master data. Guidelines for the formulation of terminology
  • ISO 22745-20:2010 (CD-ROM) Industrial automation systems and integration. Open technical dictionaries and their application to master data. Procedures for the maintenance of an open technical dictionary
  • ISO 23279:2010 (Edition 2) Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds
  • ISO 23794:2010 (Edition 2) Rubber, vulcanized or thermoplastic. Abrasion testing. Guidance
  • ISO/TR 24475:2010 Cosmetics. Good manufacturing practices. General training document
  • ISO/IEC 24744:2007 Software engineering. Metamodel for development methodologies
    AMENDMENT 1:February 2010
  • ISO 25112:2010 Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using IEEE 802.16
  • ISO 25113:2010 Intelligent transport systems. Communications access for land mobiles (CALM). Mobile wireless broadband using HC-SDMA
  • ISO 25179:2010 Adhesives. Determination of the solubility of water-soluble or alkali-soluble pressure-sensitive adhesives
  • ISO 25902-2:2010 Titanium pipes and tubes. Non-destructive testing. Ultrasonic testing for the detection of longitudinal imperfections
  • ISO 26203-1:2010 Metallic materials. Tensile testing at high strain rates. Elastic bar-type system
  • ISO 27025:2010 Space systems. Programme management. Quality assurance requirements
  • ISO 27875:2010 Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages
  • ISO 28238:2010 Compression and injection moulds. Components for gating systems
  • ISO 29581-2:2010 Cement. Test methods. Chemical analysis by x-ray fluorescence
  • ISO/TR 29944:2010 Powered industrial trucks and tractors. Brake performance. Determination of measurement procedures

Published in international.