ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A1021/A1021M Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
    Reapproved, available as A1021/A1021M-05(2010)
  • A1025 Standard Specification for Ferroalloys, General Requirements
    Reapproved, available as A1025-05(2010)
  • A1031/A1031M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
    Revised to A1031/A1031M-10
  • A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications
    Revised to A105/A105M-10
  • A1067-10 Standard Specification for Test Coupons for Steel Castings
    New standard
  • A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
    Revised to A182/A182M-10
  • A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications
    Revised to A193/A193M-10
  • A217/A217M Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
    Revised to A217/A217M-10
  • A231/A231M Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
    Revised to A231/A231M-10
  • A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
    Revised to A234/A234M-10
  • A255 Standard Test Methods for Determining Hardenability of Steel
    Revised to A255-10
  • A276 Standard Specification for Stainless Steel Bars and Shapes
    Revised to A276-10
  • A290/A290M Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
    Reapproved, available as A290/A290M-05(2010)
  • A291/A291M Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
    Reapproved, available as A291/A291M-05(2010)
  • A297/A297M Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
    Revised to A297/A297M-10
  • A311/A311M Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
    Reapproved, available as A311/A311M-04(2010)
  • A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
    Revised (with title change) to A320/A320M-10
  • A323 Standard Specification for Ferroboron
    Reapproved, available as A323-05(2010)
  • A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
    Revised to A325-10
  • A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
    Revised to A335/A335M-10a
  • A336/A336M Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
    Revised to A336/A336M-10
  • A369/A369M Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
    Revised to A369/A369M-10
  • A401/A401M Standard Specification for Steel Wire, Chromium-Silicon Alloy
    Revised to A401/A401M-10
  • A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
    Revised to A403/A403M-10
  • A420/A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
    Revised to A420/A420M-10
  • A437/A437M Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
    Revised to A437/A437M-10a
  • A450/A450M Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
    Revised to A450/A450M-10
  • A470/A470M Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
    Reapproved, available as A470/A470M-05(2010)
  • A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
    Revised to A479/A479M-10a
  • A481 Standard Specification for Chromium Metal
    Reapproved, available as A481-05(2010)
  • A482 Standard Specification for Ferrochrome-Silicon
    Reapproved, available as A482-05(2010)
  • A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings
    Revised to A484/A484M-10
  • A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
    Revised to A490-10
  • A508/A508M Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
    Reapproved, available as A508/A508M-05b(2010)
  • A601 Standard Specification for Electrolytic Manganese Metal
    Reapproved, available as A601-05(2010)
  • A660 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
    Reapproved, available as A660-96(2010)
  • A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
    Revised to A684/A684M-10
  • A688/A688M Standard Specification for Welded Austenitic Stainless Steel Feedwater Heater Tubes
    Revised to A688/A688M-10
  • A701 Standard Specification for Ferromanganese-Silicon
    Reapproved, available as A701-05(2010)
  • A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
    Revised to A744/A744M-10
  • A768/A768M Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
    Reapproved, available as A768/A768M-05(2010)
  • A789/A789M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
    Revised to A789/A789M-10
  • A803/A803M Standard Specification for Welded Ferritic Stainless Steel Feedwater Heater Tubes
    Revised to A803/A803M-10
  • A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
    Revised to A815/A815M-10
  • A835/A835M Standard Specification for Sizes of Ferroalloys and Alloy Additives
    Reapproved, available as A835/A835M-84(2010)
  • A858/A858M Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
    Revised to A858/A858M-10
  • A906/A906M Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
    Reapproved, available as A906/A906M-02(2010)
  • A922 Standard Specification for Silicon Metal
    Reapproved, available as A922-05(2010)
  • A952/A952M Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
    Reapproved, available as A952/A952M-02(2010)
  • A982/A982M Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
    Reapproved, available as A982/A982M-05(2010)
  • B170 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes
    Reapproved, available as B170-99(2010)
  • B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
    Revised to B172-10
  • B173 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
    Revised to B173-10
  • B174 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
    Revised to B174-10
  • B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
    Revised to B179-10
  • B227 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
    Revised to B227-10
  • B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
    Revised to B265-10
  • B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
    Revised to B308/B308M-10
  • B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
    Revised to B316/B316M-10
  • B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
    Revised to B338-10
  • B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets
    Revised to B348-10
  • B381 Standard Specification for Titanium and Titanium Alloy Forgings
    Revised to B381-10
  • B441 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)
    Reapproved, available as B441-04(2010)
  • B449 Standard Specification for Chromates on Aluminum
    Reapproved (with editorial change), available as B449-93(2010)e1
  • B463 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip
    Revised (with title change) to B463-10
  • B464 Standard Specification for Welded UNS N08020 Alloy Pipe
    Revised (with title change) to B464-10
  • B468 Standard Specification for Welded UNS N08020 Alloy Tubes
    Revised (with title change) to B468-10
  • B495 Standard Specification for Zirconium and Zirconium Alloy Ingots
    Revised to B495-10
  • B540 Standard Specification for Palladium Electrical Contact Alloy
    Editorially changed, available as B540-97(2008)e1
  • B547/B547M Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube
    Revised to B547/B547M-10
  • B602 Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings
    Reapproved, available as B602-88(2010)
  • B652/B652M Standard Specification for Niobium-Hafnium Alloy Ingots
    Revised to B652/B652M-10
  • B654/B654M Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
    Revised to B654/B654M-10
  • B655/B655M Standard Specification for Niobium-Hafnium Alloy Bar and Wire
    Revised (with title change) to B655/B655M-10
  • B697 Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings
    Reapproved, available as B697-88(2010)
  • B762 Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings
    Reapproved, available as B762-90(2010)
  • B827 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
    Editorially changed, available as B827-05(2009)e2
  • B860 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
    Editorially changed, available as B860-09ae1
  • B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe
    Revised to B861-10
  • B863 Standard Specification for Titanium and Titanium Alloy Wire
    Revised to B863-10
  • B895 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution
    Reapproved (with editorial change), available as B895-05(2010)e1
  • B903 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement
    Revised to B903-10
  • B905 Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
    Reapproved, available as B905-00(2010)
  • B956 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins
    Revised to B956-10
  • C1022 Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
    Reapproved, available as C1022-05(2010)
  • C1023 Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
    Revised to C1023-10
  • C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
    Revised to C1047-10
  • C1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
    Revised to C1088-10
  • C1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
    Revised to C1136-10
  • C1164 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
    Reapproved, available as C1164-92(2009)
  • C1179 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air
    Reapproved (with editorial change), available as C1179-91(2010)e1
  • C1232 Standard Terminology of Masonry
    Revised to C1232-10a
  • C1262 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
    Revised to C1262-10
  • C1272 Standard Specification for Heavy Vehicular Paving Brick
    Revised to C1272-10
  • C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
    Revised to C1289-10
  • C134 Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
    Reapproved, available as C134-95(2010)
  • C1405 Standard Specification for Glazed Brick (Single Fired, Brick Units)
    Revised to C1405-10
  • C1431 Standard Guide for Corrosion Testing of Aluminum-Based Spent Nuclear Fuel in Support of Repository Disposal
    Editorially changed, available as C1431-99(2010)e1
  • C1457 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction
    Reapproved, available as C1457-00(2010)e1
  • C147 Standard Test Methods for Internal Pressure Strength of Glass Containers
    Reapproved, available as C147-86(2010)
  • C1475 Standard Guide for Determination of Neptunium-237 in Soil
    Reapproved (with editorial change), available as C1475-05(2010)e1
  • C149 Standard Test Method for Thermal Shock Resistance of Glass Containers
    Reapproved, available as C149-86(2010)
  • C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
    Revised to C1513-10
  • C1660 Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
    Revised to C1660-10
  • C1695 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
    Revised to C1695-10
  • C1729-10 Standard Specification for Aluminum Jacketing for Insulation
    New standard
  • C187 Standard Test Method for Normal Consistency of Hydraulic Cement
    Revised to C187-10
  • C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
    Reapproved, available as C20-00(2010)
  • C206 Standard Specification for Finishing Hydrated Lime
    Reapproved, available as C206-03(2009)
  • C212 Standard Specification for Structural Clay Facing Tile
    Revised to C212-10
  • C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
    Revised to C216-10
  • C279 Standard Specification for Chemical-Resistant Masonry Units
    Revised to C279-10
  • C282 Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)
    Revised to C282-10
  • C285 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel
    Revised to C285-10
  • C336 Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
    Reapproved, available as C336-71(2010)
  • C34 Standard Specification for Structural Clay Load-Bearing Wall Tile
    Revised to C34-10
  • C476 Standard Specification for Grout for Masonry
    Revised to C476-10
  • C5 Standard Specification for Quicklime for Structural Purposes
    Reapproved, available as C5-03(2009)
  • C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
    Revised to C518-10
  • C530 Standard Specification for Structural Clay Nonloadbearing Screen Tile
    Revised to C530-10
  • C550 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
    Revised to C550-10
  • C559 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles
    Reapproved, available as C559-90(2010)
  • C56 Standard Specification for Structural Clay Nonloadbearing Tile
    Revised to C56-10
  • C560 Standard Test Methods for Chemical Analysis of Graphite
    Reapproved (with editorial change), available as C560-88(2010)e1
  • C561 Standard Test Method for Ash in a Graphite Sample
    Editorially changed, available as C561-91(2010)e1
  • C562 Standard Test Method for Moisture in a Graphite Sample
    Reapproved (with editorial change), available as C562-91(2010)e1
  • C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
    Revised to C578-10
  • C623 Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
    Reapproved, available as C623-92(2010)
  • C625 Standard Practice for Reporting Irradiation Results on Graphite
    Reapproved, available as C625-95(2010)
  • C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
    Revised to C652-10
  • C660 Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling
    Reapproved, available as C660-81(2010)
  • C662 Standard Specification for Impervious Graphite Pipe and Threading
    Reapproved, available as C662-70(2010)
  • C664 Standard Test Methods for Thickness of Diffusion Coating
    Revised to C664-10
  • C695 Standard Test Method for Compressive Strength of Carbon and Graphite
    Reapproved, available as C695-91(2010)
  • C714 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method
    Reapproved, available as C714-05(2010)
  • C744 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
    Revised to C744-10
  • C747 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance
    Reapproved (with editorial change), available as C747-93(2010)e1
  • C749 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
    Reapproved (with editorial change), available as C749-08(2010)e1
  • C783 Standard Practice for Core Sampling of Graphite Electrodes
    Reapproved (with editorial change), available as C783-85(2010)e1
  • C816 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method
    Reapproved (with editorial change), available as C816-85(2010)e1
  • C824 Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by the Dilatometer Method
    Reapproved, available as C824-91(2010)
  • C829 Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
    Reapproved, available as C829-81(2010)
  • C838 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes
    Reapproved (with editorial change), available as C838-96(2010)e1
  • C839 Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method
    Reapproved, available as C839-82(2010)
  • C847 Standard Specification for Metal Lath
    Revised to C847-10
  • C872 Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
    Revised to C872-10
  • C886 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials
    Reapproved (with editorial change), available as C886-98(2010)e1
  • C920 Standard Specification for Elastomeric Joint Sealants
    Revised to C920-10
  • C921 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
    Revised to C921-10
  • C954 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
    Revised to C954-10
  • C977 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
    Reapproved, available as C977-03(2009)
  • C998 Standard Practice for Sampling Surface Soil for Radionuclides
    Reapproved (with editorial change), available as C998-05(2010)e1
  • C999 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
    Reapproved (with editorial change), available as C999-05(2010)e1
  • D1015 Standard Test Method for Freezing Points of High-Purity Hydrocarbons
    Reapproved, available as D1015-05(2010)
  • D1016 Standard Test Method for Purity of Hydrocarbons from Freezing Points
    Reapproved, available as D1016-05(2010)
  • D1025 Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene
    Revised to D1025-10
  • D1214 Standard Test Method for Sieve Analysis of Glass Spheres
    Revised to D1214-10
  • D1223 Standard Test Method for Specular Gloss of Paper and Paperboard at 75°
    Withdrawn with no replacement.
  • D1224 Standard Test Methods for Zinc and Cadmium in Paper
    Withdrawn with no replacement.
  • D1263 Standard Test Method for Leakage Tendencies of Automotive Wheel Bearing Greases
    Withdrawn with no replacement.
  • D1319 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    Revised to D1319-10
  • D1321 Standard Test Method for Needle Penetration of Petroleum Waxes
    Revised to D1321-10
  • D1356 Standard Terminology Relating to Sampling and Analysis of Atmospheres
    Reapproved, available as D1356-05(2010)
  • D1386 Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
    Revised to D1386-10
  • D1403 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment
    Revised to D1403-10
  • D1465 Standard Test Method for Blocking and Picking Points of Petroleum Wax
    Revised to D1465-10
  • D1524 Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field
    Reapproved, available as D1524-94(2010)
  • D1566 Standard Terminology Relating to Rubber
    Editorially changed, available as D1566-10e1
  • D1611 Standard Test Method for Corrosion Produced by Leather in Contact with Metal
    Reapproved, available as D1611-00(2010)
  • D1621 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics
    Revised to D1621-10
  • D1708 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
    Revised to D1708-10
  • D1749 Standard Practice for Interlaboratory Evaluation of Test Methods Used with Paper and Paper Products
    Withdrawn with no replacement.
  • D1912 Standard Test Method for Cold-Crack Resistance of Upholstery Leather
    Reapproved, available as D1912-00(2010)
  • D1913 Standard Test Method for Resistance to Wetting of Garment-Type Leathers (Spray Test)
    Reapproved, available as D1913-00(2010)
  • D1914 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres
    Reapproved, available as D1914-95(2010)
  • D1968 Standard Terminology Relating to Paper and Paper Products
    Withdrawn with no replacement.
  • D2014 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
    Reapproved, available as D2014-97(2010)
  • D2048 Standard Test Method for Powdering of Floor Polish Films
    Revised to D2048-10
  • D2096 Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather
    Reapproved, available as D2096-00(2010)
  • D2097 Standard Test Method for Flex Testing of Finish on Upholstery Leather
    Reapproved, available as D2097-03(2010)
  • D2099 Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
    Reapproved (with editorial change), available as D2099-05(2010)e1
  • D2152 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
    Reapproved, available as D2152-95(2010)
  • D217 Standard Test Methods for Cone Penetration of Lubricating Grease
    Revised to D217-10
  • D2176 Standard Test Method for Folding Endurance of Paper by the M.I.T. Tester
    Withdrawn with no replacement.
  • D2208 Standard Test Method for Breaking Strength of Leather by the Grab Method
    Reapproved, available as D2208-00(2010)
  • D2209 Standard Test Method for Tensile Strength of Leather
    Reapproved, available as D2209-00(2010)
  • D2213 Standard Test Method for Compressibility of Leather
    Reapproved, available as D2213-00(2010)
  • D2301 Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
    Revised to D2301-10
  • D2504 Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography
    Reapproved, available as D2504-88(2010)
  • D2505 Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
    Reapproved, available as D2505-88(2010)
  • D2670 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
    Reapproved, available as D2670-95(2010)
  • D2712 Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography
    Reapproved, available as D2712-91(2010)
  • D2754 Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
    Revised to D2754-10
  • D2754 Standard Specification for High-Temperature Glass Cloth Pressure-Sensitive Electrical Insulating Tape
    Revised to D2754-10
  • D2827 Standard Specification for Styrene Monomer
    Revised to D2827-10
  • D2860/D2860M Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress
    Reapproved, available as D2860/D2860M-04(2010)
  • D2875 Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather
    Reapproved, available as D2875-00(2010)
  • D2876 Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
    Reapproved, available as D2876-00(2010)
  • D293 Standard Test Method for the Sieve Analysis of Coke
    Reapproved, available as D293-93(2010)
  • D3005 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
    Revised to D3005-10
  • D3006 Standard Specification for Polyethylene Plastic Pressure-Sensitive Electrical Insulating Tape
    Revised to D3006-10
  • D3038 Standard Test Method for Drop Shatter Test for Coke
    Reapproved, available as D3038-93(2010)
  • D3045 Standard Practice for Heat Aging of Plastics Without Load
    Reapproved, available as D3045-92(2010)
  • D3052 Standard Practice for Rating Water-Emulsion Floor Polishes
    Reapproved, available as D3052-87(2010)
  • D3104 Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
    Reapproved, available as D3104-99(2010)
  • D3117 Standard Test Method for Wax Appearance Point of Distillate Fuels
    Withdrawn with no replacement.
  • D3245 Standard Test Method for Pumpability of Industrial Fuel Oils
    Withdrawn with no replacement.
  • D3344 Standard Test Method for Total Wax Content of Corrugated Paperboard
    Reapproved, available as D3344-90(2010)
  • D3359 Standard Test Methods for Measuring Adhesion by Tape Test
    Editorially changed, available as D3359-09e1
  • D3437 Standard Practice for Sampling and Handling Liquid Cyclic Products
    Revised to D3437-10
  • D3438 Standard Practice for Sampling and Handling Naphthalene, Maleic Anhydride, and Phthalic Anhydride
    Revised to D3438-10
  • D346 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
    Reapproved, available as D346-04(2010)
  • D3576 Standard Test Method for Cell Size of Rigid Cellular Plastics
    Reapproved, available as D3576-04(2010)
  • D3609 Standard Practice for Calibration Techniques Using Permeation Tubes
    Reapproved, available as D3609-00(2010)
  • D3642 Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
    Reapproved, available as D3642-98(2010)
  • D3643 Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
    Revised to D3643-10
  • D3708 Standard Test Method for Weight of Wax Applied During Curtain Coating Operation
    Reapproved, available as D3708-88(2010)
  • D3739 Standard Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis
    Reapproved, available as D3739-06(2010)
  • D3751/D3751M Standard Practice for Evaluation of Furniture Polish
    Revised (with designation change) to D3751/D3751M-10
  • D3758 Standard Practice for Evaluation of Spray-Buff Products on Test Floors
    Reapproved, available as D3758-95(2010)
  • D3800 Standard Test Method for Density of High-Modulus Fibers
    Reapproved, available as D3800-99(2010)
  • D3912 Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
    Reinstated, with revision to D3912-10
  • D3954 Standard Test Method for Dropping Point of Waxes
    Reapproved, available as D3954-94(2010)
  • D3964 Standard Practice for Selection of Coating Specimens for Appearance Measurements
    Revised to D3964-10
  • D4 Standard Test Method for Bitumen Content
    Reapproved, available as D4-86(2010)
  • D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
    Reapproved, available as D4045-04(2010)
  • D4082 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants
    Revised (with title change) to D4082-10
  • D409/D409M Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
    Editorially changed, available as D409/D409M-09ae1
  • D4101 Standard Specification for Polypropylene Injection and Extrusion Materials
    Revised to D4101-10
  • D4172 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
    Reapproved, available as D4172-94(2010)
  • D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products
    Reapproved, available as D4177-95(2010)
  • D4283 Standard Test Method for Viscosity of Silicone Fluids
    Reapproved, available as D4283-98(2010)
  • D4297 Standard Practice for Sampling and Handling Bisphenol A (4,4' -Isopropylidinediphenol)
    Revised to D4297-10
  • D4303 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
    Revised to D4303-10
  • D4305 Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures
    Withdrawn with no replacement.
  • D4307 Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards
    Reapproved, available as D4307-99(2010)
  • D4312 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
    Reapproved, available as D4312-95a(2010)
  • D4404 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
    Revised to D4404-10
  • D4419 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
    Reapproved, available as D4419-90(2010)
  • D4423 Standard Test Method for Determination of Carbonyls In C4 Hydrocarbons
    Revised to D4423-10
  • D4516 Standard Practice for Standardizing Reverse Osmosis Performance Data
    Reapproved, available as D4516-00(2010)
  • D4532 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
    Revised to D4532-10
  • D4559 Standard Test Method for Volatile Matter in Silicone Fluid
    Reapproved, available as D4559-99(2010)
  • D4565 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable
    Revised to D4565-10
  • D4582 Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis
    Revised to D4582-10
  • D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
    Revised (with designation change) to D4637/D4637M-10
  • D4692 Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO4, SrSO4, and BaSO4) for Reverse Osmosis and Nanofiltration
    Reapproved, available as D4692-01(2010)
  • D4786 Standard Test Method for Stitch Tear Strength, Single Hole
    Reapproved, available as D4786-00(2010)
  • D4807 Standard Test Method for Sediment in Crude Oil by Membrane Filtration
    Reapproved, available as D4807-05(2010)
  • D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel
    Revised to D4814-10
  • D4826 Standard Practice for Units of Measurement and Conversion Factors for Pulp, Paper, and Paperboard
    Withdrawn with no replacement.
  • D4831 Standard Test Method for Buckle Tear Strength of Leather
    Reapproved, available as D4831-00(2010)
  • D4863 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
    Revised to D4863-10
  • D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
    Reapproved, available as D4868-00(2010)
  • D4935 Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials
    Reinstated as D4935-10
  • D4940 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
    Revised to D4940-10
  • D4988 Standard Test Method for Determination of Alkalinity of Paper as Calcium Carbonate (Alkaline Reserve of Paper)
    Withdrawn with no replacement.
  • D5056 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    Reapproved, available as D5056-04(2010)
  • D5083 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
    Revised to D5083-10
  • D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
    Revised to D5116-10
  • D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings
    Revised to D5146-10
  • D5228 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
    Reapproved, available as D5228-92(2010)
  • D5230 Standard Test Method for Carbon Black—Automated Individual Pellet Hardness
    Editorially changed, available as D5230-09e1
  • D5341 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)
    Reapproved, available as D5341-99(2010)
  • D5342 Standard Test Method for Resistance to Bending of Paper and Paperboard (Taber-Type Tester in Basic Configuration)
    Withdrawn with no replacement.
  • D5502 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
    Reapproved, available as D5502-00(2010)
  • D5515 Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer
    Reapproved, available as D5515-97(2010)
  • D5571 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
    Reapproved, available as D5571-94(2010)
  • D5578 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
    Reapproved, available as D5578-04(2010)
  • D5579 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
    Revised to D5579-10
  • D5592 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
    Reapproved, available as D5592-94(2010)
  • D5608 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
    Revised to D5608-10
  • D5650 Standard Test Method for Resistance to Bending of Paper of Low Bending Stiffness (Taber-Type Tester in 0 to 10 Taber Stiffness Unit Configuration)
    Withdrawn with no replacement.
  • D5662 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
    Revised to D5662-10
  • D570 Standard Test Method for Water Absorption of Plastics
    Reapproved (with editorial change), available as D570-98(2010)e1
  • D5742 Standard Test Method for Determination of Butane Activity of Activated Carbon
    Reapproved, available as D5742-95(2010)
  • D5798 Standard Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines
    Revised (with title change) to D5798-10
  • D585 Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
    Withdrawn with no replacement.
  • D5854 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
    Reapproved, available as D5854-96(2010)
  • D5900 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
    Revised to D5900-10
  • D5901 Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method)
    Withdrawn with no replacement.
  • D5972 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
    Reapproved, available as D5972-05(2010)
  • D6013 Standard Test Method for Determination of Area Stability of Leather to Laundering
    Reapproved, available as D6013-00(2010)
  • D6014 Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces
    Reapproved, available as D6014-00(2010)
  • D6020 Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage
    Reapproved, available as D6020-00(2010)
  • D6067 Standard Guide for Using the Electronic Cone Penetrometer for Environmental Site Characterization
    Revised to D6067-10
  • D6075 Standard Test Method for Cracking Resistance of Leather
    Reapproved, available as D6075-00(2010)
  • D6110 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
    Revised to D6110-10
  • D6116 Standard Test Method for Blocking
    Reapproved, available as D6116-00(2010)
  • D6122 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems
    Revised (with title change) to D6122-10
  • D6271 Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol
    Revised to D6271-10
  • D6272 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
    Revised to D6272-10
  • D6306 Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air
    Revised to D6306-10
  • D6394 Standard Specification for Sulfone Plastics (SP)
    Revised to D6394-10
  • D6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine
    Reapproved (with editorial change), available as D6425-05(2010)e1
  • D643 Standard Test Method for Folding Endurance of Paper by the Schopper Tester
    Withdrawn with no replacement.
  • D644 Standard Test Method for Moisture Content of Paper and Paperboard by Oven Drying
    Withdrawn with no replacement.
  • D6443 Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
    Reapproved, available as D6443-04(2010)
  • D6470 Standard Test Method for Salt in Crude Oils (Potentiometric Method)
    Reapproved, available as D6470-99(2010)
  • D6481 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy
    Reapproved, available as D6481-99(2010)
  • D6494 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction
    Reapproved, available as D6494-99(2010)
  • D6502 Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)
    Revised (with title change) to D6502-10
  • D6526 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography
    Revised to D6526-10
  • D6558 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks
    Reapproved, available as D6558-00(2010)
  • D6559 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks
    Reapproved, available as D6559-00a(2010)
  • D6593 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
    Revised to D6593-10
  • D6618 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine
    Revised to D6618-10
  • D6667 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence
    Reapproved, available as D6667-04(2010)
  • D6668 Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1
    Reapproved, available as D6668-01(2010)
  • D6732 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry
    Reapproved, available as D6732-04(2010)
  • D6794 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time
    Revised to D6794-10
  • D6795 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time
    Revised to D6795-10
  • D685 Standard Practice for Conditioning Paper and Paper Products for Testing
    Withdrawn with no replacement.
  • D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine
    Revised to D6891-10
  • D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine
    Revised to D6894-10
  • D6908 Standard Practice for Integrity Testing of Water Filtration Membrane Systems
    Reapproved, available as D6908-06(2010)
  • D6928 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
    Revised to D6928-10
  • D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
    Revised to D6938-10
  • D695 Standard Test Method for Compressive Properties of Rigid Plastics
    Revised to D695-10
  • D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
    Revised to D6984-10
  • D7011 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
    Revised to D7011-10
  • D7014 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
    Revised to D7014-10
  • D7040 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
    Reapproved, available as D7040-04(2010)
  • D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
    Reapproved, available as D7041-04(2010)
  • D7049 Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres
    Reapproved, available as D7049-04(2010)
  • D7082 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
    Reapproved, available as D7082-04(2010)
  • D7153 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
    Reapproved, available as D7153-05(2010)
  • D7154 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
    Reapproved, available as D7154-05(2010)
  • D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
    Revised to D7156-10
  • D7192 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
    Revised to D7192-10
  • D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
    Revised to D7216-10
  • D7237 Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
    Revised (with title change) to D7237-10
  • D7285 Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems
    Reapproved, available as D7285-06(2010)
  • D732 Standard Test Method for Shear Strength of Plastics by Punch Tool
    Revised to D732-10
  • D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
    Revised to D7320-10
  • D7376 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
    Revised to D7376-10a
  • D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
    Revised to D7422-10
  • D7468 Standard Test Method for Cummins ISM Test
    Revised to D7468-10
  • D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
    Revised to D7484-10a
  • D7510-10 Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
    New standard
  • D7551-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence
    New standard
  • D7571-10 Standard Specification for Retained Sewn Seam Strength After Exposures to Hot Air and Open Flame
    New standard
  • D7601-10 Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
    New standard
  • D7612-10 Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources
    New standard
  • D7626-10 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
    New standard
  • D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
    Revised to D790-10
  • D893 Standard Test Method for Insolubles In Used Lubricating Oils
    Reapproved, available as D893-05(2010)
  • D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation
    Reapproved, available as D95-05(2010)
  • D951 Standard Test Method for Water Resistance of Shipping Containers by Spray Method
    Reapproved, available as D951-99(2010)
  • D985 Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
    Withdrawn with no replacement.
  • E10 Standard Test Method for Brinell Hardness of Metallic Materials
    Revised to E10-10
  • E1042 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
    Editorially changed, available as E1042-02(2008)e1
  • E1124 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
    Revised to E1124-10
  • E1231 Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
    Revised to E1231-10
  • E1264 Standard Classification for Acoustical Ceiling Products
    Editorially changed, available as E1264-08e1
  • E1299 Standard Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
    Reapproved, available as E1299-96(2010)
  • E1332 Standard Classification for Determination of Outdoor-Indoor Transmission Class
    Revised (with title change) to E1332-10
  • E1332 Standard Classification for Rating Outdoor-Indoor Sound Attenuation
    Revised (with title change) to E1332-10a
  • E1405 Standard Specification for Laboratory Glass Distillation Flasks
    Reapproved, available as E1405-98(2010)
  • E1823 Standard Terminology Relating to Fatigue and Fracture Testing
    Revised to E1823-10
  • E1843 Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection
    Reapproved, available as E1843-96(2010)
  • E1897 Standard Test Methods for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers
    Reapproved, available as E1897-97(2010)
  • E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
    Revised to E1921-10
  • E2020 Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at Contaminated Sites
    Reapproved, available as E2020-99a(2010)
  • E2056 Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures
    Reapproved, available as E2056-04(2010)
  • E2105 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
    Reapproved, available as E2105-00(2010)
  • E2186 Standard Guide for Determining DNA Single-Strand Damage in Eukaryotic Cells Using the Comet Assay
    Reapproved, available as E2186-02a(2010)
  • E2226 Standard Practice for Application of Hose Stream
    Revised to E2226-10
  • E2253 Standard Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
    Editorially changed, available as E2253-08e1
  • E2352 Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
    Reapproved, available as E2352-04(2010)
  • E2356 Standard Practice for Comprehensive Building Asbestos Surveys
    Revised to E2356-09
  • E2368 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
    Revised to E2368-10
  • E2393 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
    Revised to E2393-10
  • E2584 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
    Revised to E2584-10
  • E2584 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
    Revised to E2584-10
  • E2600 Standard Guide for Vapor Encroachment Screening on Property Involved in Real Estate Transactions
    Revised (with title change) to E2600-10
  • E2630 Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source
    Editorially changed, available as E2630-08e1
  • E2638 Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room
    Revised to E2638-10
  • E2734/E2734M-10 Standard Specification for Dimensions of Knife-Edge Flanges
    New standard
  • E2759-10 Standard Practice for Highway Traffic Monitoring Truth-in-Data
    New standard
  • E289 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
    Reapproved, available as E289-04(2010)
  • E296 Standard Practice for Ionization Gage Application to Space Simulators
    Reapproved, available as E296-70(2010)
  • E330 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
    Reapproved, available as E330-02(2010)
  • E491 Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
    Reapproved, available as E491-73(2010)
  • E512 Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
    Reapproved, available as E512-94(2010)
  • E557 Standard Guide for The Installation of Operable Partitions
    Editorially changed, available as E557-00(2006)e1
  • E713 Standard Guide for Selection of Scales for Metric Building Drawings
    Withdrawn with no replacement.
  • E814 Standard Test Method for Fire Tests of Penetration Firestop Systems
    Revised to E814-10
  • E921 Standard Specification for Export Packaged Laboratory Apparatus
    Reapproved, available as E921-97(2010)
  • E963 Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
    Reapproved, available as E963-95(2010)
  • E986 Standard Practice for Scanning Electron Microscope Beam Size Characterization
    Reapproved, available as E986-04(2010)
  • F1018 Standard Specification for Steel Emergency Gear Stowage Locker
    Reapproved, available as F1018-87a(2010)
  • F105 Standard Specification for Type 58 Borosilicate Sealing Glass
    Reapproved, available as F105-72(2010)
  • F1057 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
    Revised to F1057-10
  • F1092 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
    Reapproved, available as F1092-04(2010)
  • F1120 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
    Reapproved, available as F1120-87(2010)
  • F1157 Standard Practice for Classifying the Relative Performance of the Physical Properties of Security Seals
    Reapproved, available as F1157-04(2010)
  • F1165 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
    Revised to F1165-10
  • F1201 Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F
    Reapproved, available as F1201-88(2010)
  • F1344 Standard Specification for Rubber Floor Tile
    Revised to F1344-10
  • F1386 Standard Guide for Construction of a Sounding Tube and Striker Plate for Tank Sounding
    Reapproved, available as F1386-92(2010)
  • F14 Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
    Reapproved, available as F14-80(2010)
  • F1431 Standard Specification for Water Trap for Diesel Exhaust
    Reapproved, available as F1431-92(2010)
  • F1433 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
    Reapproved, available as F1433-97(2010)
  • F144 Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
    Reapproved, available as F144-80(2010)
  • F1468 Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
    Reapproved, available as F1468-04a(2010)
  • F1508 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas and Liquid Services
    Reapproved, available as F1508-96(2010)
  • F1642 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
    Reapproved, available as F1642-04(2010)
  • F1647 Standard Test Methods for Organic Matter Content of Putting Green and Sports Turf Root Zone Mixes
    Reapproved, available as F1647-02a(2010)
  • F1662 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
    Revised to F1662-10
  • F1730 Standard Guide for Throwing a Water Rescue Throwbag
    Reapproved, available as F1730-96(2009)
  • F1759 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
    Reapproved, available as F1759-97(2010)
  • F1786 Standard Test Method for Performance of Braising Pans
    Reapproved, available as F1786-97(2010)
  • F1792 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
    Reapproved, available as F1792-97(2010)
  • F1793 Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air Or Nitrogen Service
    Reapproved, available as F1793-97(2010)
  • F1794 Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas), and Hydraulic Systems
    Reapproved, available as F1794-97(2010)
  • F1859 Standard Specification for Rubber Sheet Floor Covering Without Backing
    Revised to F1859-10
  • F1860 Standard Specification for Rubber Sheet Floor Covering With Backing
    Revised to F1860-10
  • F1863 Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts
    Revised to F1863-10
  • F1889 Standard Guide for Straightness Measurement of Arrow Shafts
    Reapproved, available as F1889-05(2010)
  • F1895 Practice for Submersion of a Membrane Switch
    Revised to F1895-10
  • F1896 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material
    Revised to F1896-10
  • F1913 Standard Specification for Vinyl Sheet Floor Covering Without Backing
    Reapproved, available as F1913-04(2010)
  • F1937 Standard Specification for Body Protectors Used in Horse Sports and Horseback Riding
    Reapproved, available as F1937-04(2010)
  • F1977 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
    Reapproved, available as F1977-04(2010)
  • F2011 Standard Specification for Safety and Performance of Fun-Karts
    Reapproved, available as F2011-02(2010)
  • F2031 Standard Test Method for Measurement of Arrow Shaft Static Spine (Stiffness)
    Reapproved, available as F2031-05(2010)
  • F2120 Standard Practice for Testing Treestand Load Capacity
    Reapproved, available as F2120-06(2010)
  • F2126 Standard Test Method for Treestand Static Load Capacity
    Reapproved, available as F2126-06(2010)
  • F2143 Standard Test Method for Performance of Refrigerated Buffet and Preparation Tables
    Reapproved, available as F2143-04(2010)
  • F2201 Standard Consumer Safety Specification for Utility Lighters
    Revised to F2201-10
  • F2206 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
    Reapproved, available as F2206-02(2010)
  • F2209 Standard Guide for Training of Level I Land Search Team Member
    Revised to F2209-10
  • F2247 Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
    Reapproved, available as F2247-03(2010)
  • F2348 Standard Performance Specification for Privacy Padlocks
    Reapproved, available as F2348-04(2010)
  • F2357 Standard Test Method for Determining the Abrasion Resistance of Inks and Coatings on Membrane Switches Using the Norman Tool "RCA" Abrader
    Revised to F2357-10
  • F2379 Standard Test Method for Energy Performance of Powered Open Warewashing Sinks
    Reapproved, available as F2379-04(2010)
  • F2380 Standard Test Method for Performance of Conveyor Toasters
    Reapproved, available as F2380-04(2010)
  • F2401 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
    Reapproved, available as F2401-04(2010)
  • F2409-10 Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas
    New standard
  • F2440 Standard Specification for Indoor Wall/Feature Padding
    Reapproved, available as F2440-04(2010)
  • F2446 Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
    Reapproved, available as F2446-04(2010)
  • F2469 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
    Revised to F2469-10
  • F2472 Standard Test Method for Performance of Staff-Serve Hot Deli Cases
    Reapproved, available as F2472-05(2010)
  • F2771 Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
    Revised to F2771-10
  • F2810-10 Standard Specification for Elliptical Trainers
    New standard
  • F2811-10 Standard Test Methods for Evaluating Design and Performance Characteristics of Elliptical Trainers
    New standard
  • F2821-10 Standard Test Methods for Basket Type Rescue Litters
    New standard
  • F2824-10 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
    New standard
  • F2843-10 Standard Specification for Condition 0 Bicycle Frames
    New standard
  • F2845-10 Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
    New standard
  • F309 Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
    Reapproved, available as F309-04(2010)
  • F320 Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
    Revised to F320-10
  • F330 Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
    Revised to F330-10
  • F355 Standard Test Method for Impact Attenuation of Playing Surface Systems and Materials
    Revised to F355-10
  • F400 Standard Consumer Safety Specification for Lighters
    Revised to F400-10
  • F432 Standard Specification for Roof and Rock Bolts and Accessories
    Revised to F432-10
  • F436 Standard Specification for Hardened Steel Washers
    Revised to F436-10
  • F436M Standard Specification for Hardened Steel Washers [Metric]
    Revised to F436M-10
  • F520 Standard Test Method for Environmental Resistance of Aerospace Transparencies
    Revised to F520-10
  • F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
    Revised to F606-10
  • F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets [Metric]
    Revised to F606M-10
  • F744M Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits [Metric]
    Revised to F744M-10
  • F773M Practice for Measuring Dose Rate Response of Linear Integrated Circuits [Metric]
    Revised to F773M-10
  • F879 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
    Revised to F879-10
  • F891 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
    Revised to F891-10
  • F946 Standard Guide for Establishing Security Seal Control and Accountability Procedures
    Reapproved, available as F946-85(2010)
  • F987 Standard Specification for Portable Intermediate Flush Deck Stanchion
    Reapproved, available as F987-04(2010)
  • F996 Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current-Voltage Characteristics
    Revised to F996-10
  • G90 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
    Revised to G90-10

Published in international.