IEC PUBLICATIONS

You can now purchase PDFs of IEC Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. IEC Standards in hardcopy format are also available for purchase from our website www.standards.co.nz by entering the Standard number and selecting the IEC button in the search panel.

  • IEC 60050-212:2010 (Edition 2) International electrotechnical vocabulary. Electrical insulating solids, liquids, and gases
  • IEC 60050-447:2010 International electrotechnical vocabulary. Measuring relays
  • IEC 60050-732:2010 International electrotechnical vocabulary. Computer network technology
  • IEC 60127-2:2003 Miniature fuses. Cartridge fuse-links
    AMENDMENT 2:June 2010
  • IEC 60191-6-18:2010 General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for ball grid array (BGA)
    CORRIGENDUM 1:May 2010
  • IEC 60268-4:2010 (Edition 4) Sound system equipment. Microphones
  • IEC 60364-4-44:2007 Low-voltage electrical installations. Protection for safety. Protection against voltage disturbances and electromagnetic disturbances
    CORRIGENDUM 1:May 2010 to IEC 60364-4-44:2007
  • IEC 60404-3:1992/A2:2009 Magnetic materials. Methods of measurement of the magnetic properties of electrical steel strip and sheet by means of a single sheet tester
    CORRIGENDUM 1:December 2009
  • IEC 60512-8-1:2010 Connectors for electronic equipment. Tests and measurements. Static load tests (fixed connectors). Test 8a. Static load, transverse
  • IEC 60512-17-1:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17a. Cable clamp robustness
  • IEC 60512-17-3:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17c. Cable clamp resistance to cable pull (tensile)
  • IEC 60512-17-4:2010 Connectors for electronic equipment. Tests and measurements. Cable clamping tests. Test 17d. Cable clamp resistance to cable torsion
  • IEC 60512-20-1:2010 Connectors for electronic equipment. Tests and measurements. Fire hazard tests. Test 20a. Flammability, needle-flame
  • IEC 60512-20-3:2010 Connectors for electronic equipment. Tests and measurements. Fire hazard tests. Test 20c. Flammability, glow-wire
  • IEC 60512-21-1:2010 Connectors for electronic equipment. Tests and measurements. RF resistance tests. Test 21a. RF shunt resistance
  • IEC 60512-22-1:2010 Connectors for electronic equipment. Tests and measurements. Capacitance tests. Test 22a. Capacitance
  • IEC 60512-23-2:2010 Connectors for electronic equipment. Tests and measurements. Screening and filtering tests. Test 23b. Suppression characteristics of integral filters
  • IEC 60601-2-44:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of x-ray equipment for computed tomography
    CORRIGENDUM 1:May 2010
  • IEC 60603-7-7:2010 (Edition 3) Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz
  • IEC 60603-7-71:2010 Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 1000 MHz
  • IEC 60664-3:2003 Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution
    AMENDMENT 1:May 2010
  • IEC 60684-3-116:2010 (Edition 3) Flexible insulating sleeving. Specifications for individual types of sleeving. Sheets 116 and 117. Extruded polychloroprene, general purpose
  • IEC 60684-3-209:2010 (Edition 3) Flexible insulating sleeving. Specifications for individual types of sleeving. Sheet 209. Heatshrinkable, polyolefin sleeving, general purpose, flame retarded
  • IEC 60684-3-280:2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Sheet 280. Heatshrinkable, polyolefin sleeving, anti-tracking
  • IEC 60684-3-281:2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Sheet 281. Heatshrinkable, polyolefin sleeving, semiconductive
  • IEC 60684-3-282:2010 Flexible insulating sleeving. Specifications for individual types of sleeving. Sheet 282. Heatshrinkable, polyolefin sleeving. Stress control
  • IEC 60695-1-11:2010 Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. Fire hazard assessment
  • IEC 60695-7-1:2010 (Edition 3) Fire hazard testing. Toxicity of fire effluent. General guidance
  • IEC 60728-11:2010 (Edition 3) Cable networks for television signals, sound signals and interactive services. Safety
  • IEC 60737:2010 (Edition 2) Nuclear power plants. Instrumentation important to safety. Temperature sensors (incore and primary coolant circuit). Characteristics and test methods
  • IEC 60747-1:2006 Semiconductor devices. General
    AMENDMENT 1:May 2010
  • IEC 60794-3-11:2010 (Edition 2) Optical fibre cables. Outdoor cables. Product specification for duct, directly buried, and lashed aerial single-mode optical fibre telecommunication cables
  • IEC/TR 60887:2010 (Edition 3) Glass bulb designation system for lamps
  • IEC/TR 60919-1:2010 (Edition 3) Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Steady-state conditions
  • IEC/TS 61000-3-5:2009 Electromagnetic compatibility (EMC). Limits. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
    CORRIGENDUM 2:May 2010
  • IEC 61010-1:2010 (Edition 3) Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements
  • IEC 61010-2-030:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use. Particular requirements for testing and measuring circuits
  • IEC 61076-2-101:2008 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for M12 connectors with screwlocking
    CORRIGENDUM 1:March 2010
  • IEC 61076-3-101:1997 Connectors with assessed quality, for use in D.C., low-frequency analogue and in digital high-speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
    CORRIGENDUM 1:April 2010
  • IEC 61156-2-1:2010 (Edition 3) Multicore and symmetrical pair/quad cables for digital communications. Horizontal floor wiring. Blank detail specification
  • IEC 61156-5:2009 Multicore and symmetrical pair/quad cables for digital communications. Symmetrical pair/quad cables with transmission characteristics up to 1000 MHz. Horizontal floor wiring. Sectional specification
    CORRIGENDUM 2:February 2010
  • IEC 61162-3:2008 Maritime navigation and radiocommunication equipment and systems. Digital interfaces. Serial data instrument network
    AMENDMENT 1:June 2010
  • IEC 61190-1-3:2007 Attachment materials for electronic assembly. Requirements for electronic grade solder alloys and fluxed and non-fluxed solid solders for electronic soldering applications
    AMENDMENT 1:June 2010
  • IEC 61326-1:2005 Electrical equipment of measurement, control and laboratory use. EMC requirements. General requirements
    CORRIGENDUM 2:April 2010
  • IEC 61373:2010 (Edition 2) Railway applications. Rolling stock equipment. Shock and vibration tests
  • IEC 61400-22:2010 Wind turbines. Conformity testing and certification
  • IEC 61400-24:2010 Wind turbines. Lightning protection
  • IEC 61547:2009 Equipment for general lighting purposes. EMC immunity requirements
    CORRIGENDUM 1:April 2010
  • IEC 61558-1:2005 Safety of power transformers, power supplies, reactors and similar products. General requirements and tests
    CORRIGENDUM 2:March 2010
  • IEC 61558-2-3:2010 (Edition 2) Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for ignition transformers for gas and oil burners
  • IEC 61558-2-5:2010 (Edition 2) Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units
  • IEC 61558-2-9:2010 (Edition 2) Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for transformers and power supply units for class III hand lamps for tungsten filament lamps
  • IEC 61558-2-20:2010 (Edition 2) Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for small reactors
  • IEC 61746-2:2010 Calibration of optical time-domain reflectometers (OTDR) OTDR for multimode fibres
  • IEC 61784-3-1:2010 (Edition 2) Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 1
  • IEC 61784-3-2:2010 (Edition 2) Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 2
  • IEC 61784-3-3:2010 (Edition 2) Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 3
  • IEC 61784-3-6:2010 (Edition 2) Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 6
  • IEC 61784-3-8:2010 Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 8
  • IEC 61784-3-12:2010 Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 12
  • IEC 61784-3-13:2010 Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 13
  • IEC 61784-3-14:2010 Industrial communication networks. Profiles. Functional safety fieldbuses. Additional specifications for CPF 14
  • IEC 61784-3:2010 (Edition 2) Industrial communication networks. Profiles. Functional safety fieldbuses. General rules and profile definitions
  • IEC 61788-8:2010 (Edition 2) Superconductivity. AC loss measurements. Total AC loss measurement of round superconducting wires exposed to a transverse alternating magnetic field at liquid helium temperature by a pickup coil method
  • IEC 61788-14:2010 Superconductivity. Superconducting power devices. General requirements for characteristic tests of current leads designed for powering superconducting devices
  • IEC/TS 61800-8:2010 Adjustable speed electrical power drive systems. Specification of voltage on the power interface
  • IEC/TS 61994-4-4:2010 (Edition 2) Piezoelectric and dielectric devices for frequency control and selection. Glossary. Materials. Materials for surface acoustic wave (SAW) devices
  • IEC 62106:2009 Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz
    CORRIGENDUM 1:May 2010
  • IEC 62271-302:2010 High-voltage switchgear and controlgear. Alternating current circuit-breakers with intentionally non-simultaneous pole operation
  • IEC/TS 62282-7-1:2010 Fuel cell technologies. Single cell test methods for polymer electrolyte fuel cell (PEFC)
  • IEC/TR 62283:2010 (Edition 2) Optical fibres. Guidance for nuclear radiation tests
  • IEC 62317-2:2010 Ferrite cores. Dimensions. Pot-cores for use in telecommunications, power supply, and filter applications
  • IEC 62329-3-100:2010 Heat-shrinkable moulded shapes. Specification requirements for shape dimensions, material requirements and compatibility performance. Sheet 100. Heat-shrinkable moulded shape dimensions
  • IEC 62329-3-101:2010 Heat-shrinkable moulded shapes. Specification requirements for shape dimensions, material requirements and compatibility performance. Sheet 101. Heat-shrinkable moulded shapes, polyolefin, semi-rigid, limited fire hazard, material requirements and system performance
  • IEC 62329-3-102:2010 Heat-shrinkable moulded shapes. Specification requirements for shape dimensions, material requirements and compatibility performance. Sheet 102. Heat-shrinkable elastomeric moulded shapes, semi-rigid, material requirements and system performance
  • IEC/TR 62343-6-3:2010 Dynamic modules. Round robin measurement results for group delay ripple of tunable dispersion compensators
  • IEC 62463:2010 Radiation protection instrumentation. X-ray systems for the screening of persons for security and the carrying of illicit items
  • IEC 62479:2010 Assessment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
  • IEC 62485-2:2010 Safety requirements for secondary batteries and battery installations. Stationary batteries
  • IEC 62508:2010 Guidance on human aspects of dependability
  • IEC 62514:2010 Multimedia gateway in home networks. Guidelines
  • IEC 62523:2010 Radiation protection instrumentation. Cargo/vehicle radiographic inspection system
  • IEC 62533:2010 Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material
  • IEC 62534:2010 Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material
  • IEC 62537:2010 Interface for loudspeakers with digital input signals based on IEC 60958
  • IEC 62590:2010 Railway applications. Fixed installations. Electronic power converters for substations
  • IEC/TR 62627-02:2010 Fibre optic interconnecting devices and passive components. Report of round robin test results on SC plug style fixed attenuators
  • IEC 62642-1:2010 Alarm systems. Intrusion and hold-up systems. System requirements
  • IEC CISPR 16-1-1:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Measuring apparatus
    AMENDMENT 1:June 2010
  • IEC CISPR 16-2-3:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Radiated disturbance measurements
    AMENDMENT 1:June 2010
  • IEC CISPR/TR 18-1:2010 (Edition 2) Radio interference characteristics of overhead power lines and high-voltage equipment. Description of phenomena
  • IEC CISPR/TR 18-2:2010 (Edition 2) Radio interference characteristics of overhead power lines and high-voltage equipment. Methods of measurement and procedure for determining limits
  • IEC CISPR/TR 18-3:2010 (Edition 2) Radio interference characteristics of overhead power lines and high-voltage equipment. Code of practice for minimizing the generation of radio noise

IEC/PAS publications

  • IEC/PAS 61156-1-4:2010 Multicore and symmetrical pair/quad cables for digital communications. Symmetrical pair/quad cables with transmission characteristics up to 1000 MHz. Conductor heating of bundled data grade cables for limited power transmission based on IEEE 802.3

Published in international.