ATSM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A1014/A1014M Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
    Revised (with title change) to A1014/A1014M-10
  • A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
    Revised to A1018/A1018M-10
  • A1032 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
    Reapproved, available as A1032-04(2010)
  • A1034/A1034M Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
    Revised to A1034/A1034M-10
  • A1038 Standard Practice for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
    Revised to A1038-10
  • A1062-10 Standard Specification for Steel Castings Sampling
    New standard, now available.
  • A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
    Revised (with title change) to A193/A193M-10a
  • A416/A416M Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
    Revised to A416/A416M-10
  • A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
    Revised to A428/A428M-10
  • A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
    Editorially changed, available as A449-07be1
  • A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
    Revised to A6/A6M-10
  • A769/A769M Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
    Reapproved, available as A769/A769M-05(2010)
  • A779/A779M Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
    Revised to A779/A779M-10
  • A882/A882M Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
    Reapproved, available as A882/A882M-04a(2010)
  • A886/A886M Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
    Revised to A886/A886M-10
  • A910/A910M Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
    Revised to A910/A910M-10
  • A941 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
    Revised to A941-10a
  • A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
    Revised to A955/A955M-10
  • A962/A962M Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
    Revised (with title change) to A962/A962M-10
  • B294 Standard Test Method for Hardness Testing of Cemented Carbides
    Revised to B294-10
  • B387 Standard Specification for Molybdenum and Molybdenum Alloy Bar, Rod, and Wire
    Reinstated as B387-10
  • B565 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
    Reapproved, available as B565-04(2010)
  • B822 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
    Revised to B822-10
  • B922 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption
    Revised to B922-10
  • B923 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry
    Revised to B923-10
  • B966-10 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas
    New standard, now available.
  • C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
    Revised to C1029-10
  • C1077 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
    Revised to C1077-10b
  • C1207 Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting
    Revised to C1207-10
  • C1227 Standard Specification for Precast Concrete Septic Tanks
    Revised to C1227-10a
  • C1232 Standard Terminology of Masonry
    Revised to C1232-10b
  • C1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
    Reapproved, available as C1249-06a(2010)
  • C1284 Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry
    Revised to C1284-10
  • C1287 Standard Test Method for Determination of Impurities in Uranium Dioxide by Inductively Coupled Plasma Mass Spectrometry
    Revised to C1287-10
  • C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
    Revised (with designation change) to C1303/C1303M-10
  • C1314 Standard Test Method for Compressive Strength of Masonry Prisms
    Revised to C1314-10
  • C1340/C1340M Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
    Revised (with designation change) to C1340/C1340M-10
  • C1398 Standard Test Method for The Laboratory Determination of the Time of Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles (Withdrawn 2010)
    Withdrawn with no replacement
  • C140 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
    Revised to C140-10
  • C1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
    Revised to C1472-10
  • C1512 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
    Revised to C1512-10
  • C1615 Standard Guide for Mechanical Drive Systems for Remote Operation in Hot Cell Facilities
    Revised to C1615-10
  • C1673 Standard Terminology of C26.10 Nondestructive Assay Methods
    Revised to C1673-10
  • C1714/C1714M Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
    Revised to C1714/C1714M-10
  • C270 Standard Specification for Mortar for Unit Masonry
    Revised to C270-10
  • C303 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
    Revised to C303-10
  • C452/C452M Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
    Revised to C452/C452M-10
  • C457/C457M Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
    Revised to C457/C457M-10a
  • C473 Standard Test Methods for Physical Testing of Gypsum Panel Products
    Revised to C473-10
  • C5 Standard Specification for Quicklime for Structural Purposes
    Revised to C5-10
  • C585 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
    Revised to C585-10
  • C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
    Revised to C612-10
  • C634 Standard Terminology Relating to Building and Environmental Acoustics
    Revised to C634-10
  • C697 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets
    Revised to C697-10
  • C698 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
    Revised to C698-10
  • C759 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
    Revised to C759-10
  • C793 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
    Reapproved, available as C793-05(2010)
  • D1043 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
    Revised to D1043-10
  • D1059 Standard Test Method for Yarn Number Based on Short-Length Specimens (Withdrawn 2010)
    Withdrawn with no replacement
  • D1065 Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products
    Reapproved, available as D1065-96(2010)
  • D1070 Standard Test Methods for Relative Density of Gaseous Fuels
    Reapproved, available as D1070-03(2010)
  • D1200 Standard Test Method for Viscosity by Ford Viscosity Cup
    Revised to D1200-10
  • D1401 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
    Revised to D1401-10
  • D1544 Standard Test Method for Color of Transparent Liquids (Gardner Color Scale)
    Reapproved, available as D1544-04(2010)
  • D1743 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
    Revised to D1743-10
  • D1826 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter
    Reapproved, available as D1826-94(2010)
  • D2027/D2027M Standard Specification for Cutback Asphalt (Medium-Curing Type)
    Revised (with designation change) to D2027/D2027M-10
  • D2028/D2028M Standard Specification for Cutback Asphalt (Rapid-Curing Type)
    Revised (with designation change) to D2028/D2028M-10
  • D204 Standard Test Methods for Sewing Threads
    Reapproved, available as D204-02(2010)
  • D2103 Standard Specification for Polyethylene Film and Sheeting
    Revised to D2103-10
  • D2196 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
    Revised to D2196-10
  • D2202 Standard Test Method for Slump of Sealants
    Reapproved, available as D2202-00(2010)
  • D2269 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
    Revised to D2269-10
  • D2350 Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints
    Reapproved, available as D2350-90(2010)
  • D2351 Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints
    Reapproved, available as D2351-90(2010)
  • D2352 Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints
    Reapproved, available as D2352-85(2010)
  • D2354 Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
    Reinstated as D2354-10
  • D2372 Standard Practice for Separation of Vehicle From Solvent-Reducible Paints
    Reapproved, available as D2372-85(2010)
  • D2463 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
    Revised to D2463-10a
  • D2532 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
    Revised to D2532-10
  • D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
    Revised to D256-10
  • D2596 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
    Revised to D2596-10
  • D2711 Standard Test Method for Demulsibility Characteristics of Lubricating Oils
    Revised to D2711-10
  • D2726 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
    Revised to D2726-10
  • D2864 Standard Terminology Relating to Electrical Insulating Liquids and Gases
    Revised to D2864-10
  • D3018/D3018M Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
    Revised to D3018/D3018M-10
  • D3078 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
    Editorially changed, available as D3078-02(2008)e1
  • D3258 Standard Test Method for Porosity of White or Near White Paint Films by Staining
    Reapproved (with editorial change), available as D3258-04(2010)e1
  • D3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
    Revised to D3299-10
  • D3330/D3330M Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
    Reapproved, available as D3330/D3330M-04(2010)
  • D3359 Standard Test Methods for Measuring Adhesion by Tape Test
    Editorially changed, available as D3359-09e2
  • D3450 Standard Test Method for Washability Properties of Interior Architectural Coatings
    Reapproved, available as D3450-00(2010)
  • D3462/D3462M Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
    Revised to D3462/D3462M-10a
  • D3624 Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy
    Reapproved, available as D3624-85a(2010)
  • D3717 Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy
    Reapproved, available as D3717-85a(2010)
  • D3718 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy
    Reapproved, available as D3718-85a(2010)
  • D3971 Standard Test Method for Dichloromethane-Soluble Matter in Cellulose
    Reapproved, available as D3971-89(2010)
  • D4059 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
    Reapproved, available as D4059-00(2010)
  • D4146 Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
    Reinstated as D4146-10
  • D4170 Standard Test Method for Fretting Wear Protection by Lubricating Greases
    Revised to D4170-10
  • D4212 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
    Revised to D4212-10
  • D4239 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
    Revised to D4239-10
  • D4292 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
    Revised to D4292-10
  • D4298 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability
    Reapproved, available as D4298-04(2010)
  • D4310 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
    Revised to D4310-10
  • D4385 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
    Revised to D4385-10
  • D4508 Standard Test Method for Chip Impact Strength of Plastics
    Revised to D4508-10
  • D4584 Standard Test Method for Measuring Apparent pH of Electrocoat Baths
    Reapproved, available as D4584-05(2010)
  • D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
    Revised to D4629-10
  • D464 Standard Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products
    Reapproved, available as D464-05(2010)
  • D465 Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products
    Reapproved, available as D465-05(2010)
  • D4703 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
    Revised to D4703-10
  • D4784 Standard for LNG Density Calculation Models
    Reapproved, available as D4784-93(2010)
  • D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
    Revised to D4806-10
  • D4838 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
    Reapproved, available as D4838-88(2010)
  • D4927 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
    Revised to D4927-10
  • D4933 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
    Reapproved, available as D4933-99(2010)
  • D5001 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
    Revised to D5001-10
  • D5125 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups
    Revised to D5125-10
  • D5155 Standard Test Methods for Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates
    Revised to D5155-10
  • D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
    Revised to D5188-10
  • D5229/D5229M Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
    Reapproved, available as D5229/D5229M-92(2010)
  • D5383 Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists
    Reapproved, available as D5383-02(2010)
  • D5398 Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User
    Reapproved, available as D5398-97(2010)
  • D5586/D5586M Standard Tables of Body Measurements for Women Aged 55 and Older (All Figure Types) (Withdrawn 2010) has been reinstated (with new designation). The new designation is D5586/D5586M-10
  • D5590 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Fungal Defacement by Accelerated Four-Week Agar Plate Assay
    Reapproved, available as D5590-00(2010)
  • D562 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
    Revised to D562-10
  • D5664 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
    Revised to D5664-10
  • D5712 Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method
    Revised to D5712-10
  • D5723 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
    Reapproved, available as D5723-95(2010)
  • D5744 Standard Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
    Editorially changed, available as D5744-07e1
  • D5768 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids
    Reapproved, available as D5768-02(2010)
  • D5796 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
    Reapproved, available as D5796-03(2010)
  • D5865 Standard Test Method for Gross Calorific Value of Coal and Coke
    Revised to D5865-10a
  • D5893/D5893M Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
    Revised (with designation change) to D5893/D5893M-10
  • D5974 Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
    Reapproved, available as D5974-00(2010)
  • D5998 Standard Specification for Molded Polyethylene Shipping and Storage Drums
    Revised to D5998-10
  • D6185 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases
    Revised to D6185-10
  • D6299 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
    Revised to D6299-10
  • D6319 Standard Specification for Nitrile Examination Gloves for Medical Application
    Revised to D6319-10
  • D6327 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter
    Revised to D6327-10
  • D6333 Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors
    Revised to D6333-10
  • D6345 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
    Revised to D6345-10
  • D638 Standard Test Method for Tensile Properties of Plastics
    Revised to D638-10
  • D6387 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
    Reapproved (with editorial change), available as D6387-99(2010)e1
  • D6557 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils
    Revised to D6557-10
  • D6570 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
    Reapproved, available as D6570-04(2010)
  • D6589 Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
    Reapproved (with editorial change), available as D6589-05(2010)e1
  • D6640 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
    Reapproved, available as D6640-01(2010)
  • D6696 Standard Guide for Understanding Cyanide Species
    Revised to D6696-10
  • D6740 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition
    Revised to D6740-10
  • D6741 Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content
    Revised to D6741-10
  • D6843 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)
    Revised to D6843-10
  • D6844 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)
    Revised to D6844-10
  • D6906 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by X-Ray Fluorescence
    Reapproved (with editorial change), available as D6906-03(2010)e1
  • D6909 Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer
    Revised to D6909-10
  • D7035 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    Revised to D7035-10
  • D7076 Standard Test Method for Measurement of Shives in Retted Flax
    Editorially changed, available as D7076-09e1
  • D7087 Standard Test Method for An Imaging Technique to Measure Rust Creepage at Scribe on Coated Test Panels Subjected to Corrosive Environments
    Reapproved, available as D7087-05a(2010)
  • D7102 Standard Guide for Determination of Endotoxin on Sterile Medical Gloves
    Revised to D7102-10
  • D7115 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
    Revised to D7115-10
  • D7145 Standard Guide for Measurement of Atmospheric Wind and Turbulence Profiles by Acoustic Means
    Reapproved (with editorial change), available as D7145-05(2010)e1
  • D7163 Standard Test Method for Specular Gloss of Printed Matter
    Reapproved, available as D7163-05(2010)
  • D7188 Standard Terminology for Printing Inks, Materials, and Processes
    Reapproved, available as D7188-05(2010)
  • D7191 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
    Revised to D7191-10
  • D720 Standard Test Method for Free-Swelling Index of Coal
    Reapproved, available as D720-91(2010)
  • D731 Standard Test Method for Molding Index of Thermosetting Molding Powder
    Revised to D731-10
  • D7384 Standard Practice for Minimum Geospatial Data for a Surface Coal Mining Permit Boundary
    Revised to D7384-10
  • D7405 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
    Revised to D7405-10a
  • D7430 Standard Practice for Mechanical Sampling of Coal
    Revised to D7430-10a
  • D7443 Standard Practice for Minimum Geospatial Data for Underground Coal Mining Extents
    Revised to D7443-10
  • D7460 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
    Revised to D7460-10
  • D7505/D7505M-10 Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
    New standard, now available.
  • D7508/D7508M-10 Standard Specification for Polyolefin Chopped Strands for Use in Concrete
    New standard, now available.
  • D7527-10 Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
    New standard, now available.
  • D7530/D7530M-10 Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
    New standard, now available.
  • D7582 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
    Revised to D7582-10
  • D7583-09 Standard Test Method for John Deere Coolant Cavitation Test
    New standard, now available.
  • D7584-10 Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue to the Growth of Fungi in an Environmental Chamber
    New standard, now available.
  • D7603-10 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils
    New standard, now available.
  • D7608-10 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
    New standard, now available.
  • D7625-10 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
    New standard, now available.
  • D7627-10 Standard Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine
    New standard, now available.
  • D7628-10 Standard Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas
    New standard, now available.
  • D7629/D7629M-10 Standard Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features
    New standard, now available.
  • D7630/D7630M-10 Standard Practice for Minimum Geospatial Data for Postmining Land Uses
    New standard, now available.
  • D7631-10 Standard Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location
    New standard, now available.
  • D7633-10 Standard Test Method for Carbon BlackCARBON CONTENT
    New standard, now available.
  • D7635/D7635M-10 Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
    New standard, now available.
  • D7637-10 Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
    New standard, now available.
  • D7638-10 Standard Test Method for Determination of Fatty Acids and Esters in Glycerin
    New standard, now available.
  • D7639-10 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
    New standard, now available.
  • D7641-10 Standard Guide for Textile Fibers
    New standard, now available.
  • D817 Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
    Reapproved, available as D817-96(2010)
  • D871 Standard Test Methods of Testing Cellulose Acetate
    Reapproved, available as D871-96(2010)
  • D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
    Revised to D882-10
  • D952 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
    Revised to D952-10
  • D953 Standard Test Method for Bearing Strength of Plastics
    Revised to D953-10
  • D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration
    Editorially changed, available as D974-08e1
  • E1043 Standard Specification for Pipets, Milk and Cream Examination
    Reapproved, available as E1043-00(2010)
  • E1045 Standard Specification for Pipet, Sahli Hemoglobin
    Reapproved, available as E1045-00(2010)
  • E1046 Standard Specification for Glass Westergren Tube, Disposable
    Reapproved, available as E1046-85(2010)
  • E1047 Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable
    Reapproved, available as E1047-85(2010)
  • E1048 Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants
    Reapproved, available as E1048-88(2010)
  • E1107 Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations
    Revised to E1107-10
  • E1136 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
    Revised (with title change) to E1136-10
  • E114 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
    Revised (with title change) to E114-10
  • E124 Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis
    Reapproved, available as E124-94(2010)
  • E133 Standard Specification for Distillation Equipment
    Reapproved, available as E133-92(2010)
  • E1333 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
    Revised to E1333-10
  • E1353 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
    Editorially changed, available as E1353-08ae1
  • E1360 Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
    Reapproved, available as E1360-05(2010)
  • E1402 Standard Terminology Relating to Sampling
    Editorially changed, available as E1402-08e1
  • E1588 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
    Editorially changed, available as E1588-10e1
  • E1588 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry
    Revised to E1588-10
  • E1602 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
    Reapproved (with editorial change), available as E1602-03(2010)e1
  • E1663 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
    Reapproved, available as E1663-03(2010)
  • E1687 Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
    Revised to E1687-10
  • E1688 Standard Guide for Determination of the Bioaccumulation of Sediment-Associated Contaminants by Benthic Invertebrates
    Revised to E1688-10
  • E1718 Standard Guide for Administrative and Engineering Controls for Silicon Carbide Whisker Work Areas (Withdrawn 2010)
    Withdrawn with no replacement.. E1718-95(2004)
  • E1736 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels
    Revised to E1736-10
  • E175 Standard Terminology of Microscopy
    Reapproved, available as E175-82(2010)
  • E1750 Standard Guide for Use of Water Triple Point Cells
    Revised to E1750-10
  • E1820 Standard Test Method for Measurement of Fracture Toughness
    Editorially changed, available as E1820-09e1
  • E193 Standard Specification for Laboratory Glass Micropipets
    Reapproved, available as E193-94(2010)
  • E194 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders
    Revised to E194-10
  • E205 Standard Specification for Glass and Oxygen Combustion Flask
    Reapproved, available as E205-96(2010)
  • E210 Standard Specification for Microscope Objective Thread
    Reapproved, available as E210-63(2010)
  • E211 Standard Specification for Cover Glasses and Glass Slides for Use in Microscopy
    Reapproved, available as E211-82(2010)
  • E2123 Standard Practice for the Transmittal of Evidence in Sexual Assault Investigation
    Revised to E2123-10
  • E2191/E2191M Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission
    Revised (with designation change) to E2191/E2191M-10
  • E2337/E2337M Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing
    Revised (with designation change) to E2337/E2337M-10
  • E2412 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
    Revised to E2412-10
  • E2698-10 Standard Practice for Radiological Examination Using Digital Detector Arrays
    New standard, now available.
  • E2699-10 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods
    New standard, now available.
  • E273 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
    Revised (with title change) to E273-10
  • E2736-10 Standard Guide for Digital Detector Array Radiology
    New standard, now available.
  • E2737-10 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability
    New standard, now available.
  • E2749-10 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
    New standard, now available.
  • E2758-10 Standard Guide for Selection and Use of Wideband, Low Temperature Infrared Thermometers
    New standard, now available.
  • E2760-10 Standard Test Method for Creep-Fatigue Crack Growth Testing
    New standard, now available.
  • E2767-10 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods
    New standard, now available.
  • E313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
    Revised to E313-10
  • E4 Standard Practices for Force Verification of Testing Machines
    Revised to E4-10
  • E518/E518M Standard Test Methods for Flexural Bond Strength of Masonry
    Revised (with designation change) to E518/E518M-10
  • E519/E519M Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
    Revised (with designation change) to E519/E519M-10
  • E664/E664M Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method
    Revised (with designation change) to E664/E664M-10
  • E694 Standard Specification for Laboratory Glass Volumetric Apparatus
    Reapproved, available as E694-99(2010)
  • E734 Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)
    Reapproved, available as E734-80(2010)
  • E83 Standard Practice for Verification and Classification of Extensometer Systems
    Revised to E83-10a
  • E906/E906M Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
    Revised (with designation change) to E906/E906M-10
  • E917 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
    Reapproved, available as E917-05(2010)
  • E92 Standard Test Method for Vickers Hardness of Metallic Materials (Withdrawn 2010) has been withdrawn and replaced by E384-10e2
  • F1004 Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
    Revised to F1004-10
  • F1078 Standard Terminology for Surgical Scissors—Inserted and Non-Inserted Blades
    Revised to F1078-10
  • F1169 Standard Consumer Safety Specification for Full-Size Baby Cribs
    Revised to F1169-10
  • F1717 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
    Revised to F1717-10
  • F1789 Standard Terminology for F16 Mechanical Fasteners
    Revised to F1789-10a
  • F1797 Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks
    Editorially changed, available as F1797-09e1
  • F1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    Editorially changed, available as F1807-10e1
  • F1840 Standard Terminology for Surgical Suture Needles
    Revised to F1840-10
  • F1864 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
    Reapproved, available as F1864-05(2010)
  • F1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
    Revised to F1869-10
  • F1903 Standard Practice for Testing for Biological Responses to Particles In Vitro
    Revised to F1903-10
  • F2024 Standard Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
    Reinstated, with revision to F2024-10
  • F2085 Standard Consumer Safety Specification for Portable Bed Rails
    Revised to F2085-10
  • F2219 Standard Test Methods for Measuring High-Speed Bat Performance
    Revised to F2219-10
  • F2245 Standard Specification for Design and Performance of a Light Sport Airplane
    Revised to F2245-10
  • F2259 Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
    Revised to F2259-10
  • F2304 Standard Practice for Sealing of Sewers Using Chemical Grouting
    Revised (with title change) to F2304-10
  • F2312 Standard Terminology Relating to Tissue Engineered Medical Products
    Revised to F2312-10
  • F2315 Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
    Revised to F2315-10
  • F2349 Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems
    Reapproved, available as F2349-04(2010)
  • F2350 Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems
    Reapproved, available as F2350-04(2010)
  • F2381 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
    Revised to F2381-10
  • F2398 Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
    Revised to F2398-10
  • F2429 Standard Terminology Relating to Aerospace Transparent Materials and Enclosures
    Reapproved, available as F2429-05(2010)
  • F2454 Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
    Reapproved, available as F2454-05(2010)
  • F2462 Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
    Reapproved, available as F2462-05(2010)
  • F2466 Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
    Revised to F2466-10
  • F2506 Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers
    Revised to F2506-10
  • F2797-10 Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners
    New standard, now available.
  • F2806-10 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
    New standard, now available.
  • F2834-10 Standard Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing
    New standard, now available.
  • F2835-10 Standard Specification for Underfired Broilers
    New standard, now available.
  • F2838-10 Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
    New standard, now available.
  • F2844-10 Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
    New standard, now available.
  • F2848-10 Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
    New standard, now available.
  • F366 Standard Specification for Fixation Pins and Wires
    Revised to F366-10
  • F406 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
    Revised to F406-10
  • F468 Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
    Revised to F468-10
  • F521 Standard Test Methods for Bond Integrity of Transparent Laminates
    Reapproved, available as F521-83(2010)
  • F921 Standard Terminology Relating to Hemostatic Forceps
    Revised to F921-10
  • G172 Standard Guide for Statistical Analysis of Accelerated Service Life Data
    Reapproved, available as G172-03(2010)
  • G29 Standard Practice for Determining Algal Resistance of Plastic Films
    Reapproved, available as G29-96(2010)

Published in international.