ISO PUBLICATIONS

The following ISO publications are available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

  • ISO 5-3:2009 (CD-ROM) (Edition 3) Photography and graphic technology. Density measurements. Spectral conditions
  • ISO 1452-1:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). General
  • ISO 1452-2:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Pipes
  • ISO 1452-3:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fittings
  • ISO 1452-4:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U). Valves
  • ISO 1452-5:2009 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U). Fitness for purpose of the system
  • ISO 1833-1:2006 Textiles. Quantitative chemical analysis. General principles of testing
    CORRIGENDUM 1:December 2009
  • ISO 1942:2009 (Edition 2) Dentistry. Vocabulary
  • ISO 2314:2009 (Edition 3) Gas turbines. Acceptance tests
  • ISO 2531:2009 (Edition 6) Ductile iron pipes, fittings, accessories and their joints for water applications
  • ISO 2930:2009 (Edition 4) Rubber, raw natural. Determination of plasticity retention index (PRI)
  • ISO 3040:2009 (Edition 3) Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
  • ISO 3093:2009 (Edition 4) Wheat, rye and their flours, durum wheat and durum wheat semolina. Determination of the falling number according to Hagberg-Perten
  • ISO 3159:2009 (Edition 2) Timekeeping instruments. Wrist-chronometers with spring balance oscillator
  • ISO 3601-1:2008 Fluid power systems. O-rings. Inside diameters, cross-sections, tolerances and designation codes
    CORRIGENDUM 2:November 2009
  • ISO 4080:2009 (Edition 4) Rubber and plastics hoses and hose assemblies. Determination of permeability to gas
  • ISO 4254-10:2009 Agricultural machinery. Safety. Rotary tedders and rakes
  • ISO 6983-1:2009 (Edition 2) Automation systems and integration. Numerical control of machines. Program format and definitions of address words. Data format for positioning, line motion and contouring control systems
  • ISO 7135:2009 (Edition 2) Earth-moving machinery. Hydraulic excavators. Terminology and commercial specifications
  • ISO/IEC 7810:2003 Identification cards. Physical characteristics
    AMENDMENT 1:December 2009
  • ISO/TS 8000-100:2009 (CD-ROM) Data quality. Master data. Overview
  • ISO 8000-110:2009 (CD-ROM) Data quality. Master data. Exchange of characteristic data. Syntax, semantic encoding, and conformance to data specification
  • ISO 8000-120:2009 (CD-ROM) Data quality. Master data. Exchange of characteristic data. Provenance
  • ISO/TS 8000-130:2009 (CD-ROM) Data quality. Master data. Exchange of characteristic data. Accuracy
  • ISO/TS 8000-140:2009 (CD-ROM) Data quality. Master data. Exchange of characteristic data. Completeness
  • ISO 8026:2009 (Edition 3) Agricultural irrigation equipment. Sprayers. General requirements and test methods
  • ISO 8253-2:2009 (Edition 2) Acoustics. Audiometric test methods. Sound field audiometry with pure-tone and narrowband test signals
  • ISO 8362-1:2009 (Edition 3) Injection containers and accessories. Injection vials made of glass tubing
  • ISO 9462:2006 Alpine ski-bindings. Requirements and test methods
    AMENDMENT 1:November 2009
  • ISO/IEC 9541-4:2009 Information technology. Font information interchange. Harmonization to Open Font Format
    CORRIGENDUM 1:December 2009
  • ISO/IEC 9594-1:2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Overview of concepts, models and services
  • ISO/IEC 9594-2:2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Models
  • ISO/IEC 9594-3:2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Abstract service definition
  • ISO/IEC 9594-4:2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Procedures for distributed operation
  • ISO/IEC 9594-5:2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Protocol specifications
  • ISO/IEC 9594-6:2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Selected attribute types
  • ISO/IEC 9594-7:2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Selected object classes
  • ISO/IEC 9594-8:2008 (Edition 6) Information technology. Open Systems Interconnection. The Directory. Public-key and attribute certificate frameworks
  • ISO/IEC 9594-10:2008 (Edition 4) Information technology. Open Systems Interconnection. The Directory. Use of systems management for administration of the Directory
  • ISO/IEC 9798-5:2009 (Edition 3) Information technology. Security techniques. Entity authentication. Mechanisms using zero-knowledge techniques
  • ISO 9801:2009 (Edition 2) Thermoplastics fittings. Determination of ring stiffness
  • ISO 10130:2009 Cosmetics. Analytical methods. Nitrosamines. Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization
  • ISO 10360-2:2009 (Edition 3) Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). CMMs used for measuring linear dimensions
  • ISO 10426-1:2009 (Edition 3) Petroleum and natural gas industries. Cements and materials for well cementing. Specification
  • ISO 10456:2007 Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values
    CORRIGENDUM 1:December 2009
  • ISO/HL7 10781:2009 (CD-ROM) Electronic Health Record-System Functional Model. Release 1.1
  • ISO 10993-9:2009 (Edition 2) Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products
  • ISO/TR 11636:2009 Health informatics. Dynamic on-demand virtual private network for health information infrastructure
  • ISO 11701:2009 Vegetable fats and oils. Determination of phospholipids content in lecithins by HPLC using a light-scattering detector
  • ISO 11702:2009 Animal and vegetable fats and oils. Enzymatic determination of total sterols content
  • ISO 11783-10:2009 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Task controller and management information system data interchange
  • ISO/TR 12309:2009 Health informatics. Guidelines for terminology development organizations
  • ISO 12500-4:2009 Filters for compressed air. Methods of test. Water
  • ISO 12620:2009 (Edition 2) Terminology and other language and content resources. Specification of data categories and management of a data category registry for language resources
  • ISO 12643-1:2009 (Edition 2) Graphic technology. Safety requirements for graphic technology equipment and systems. General requirements
  • ISO/IEC 12785-1:2009 Information technology. Learning, education, and training. Content packaging. Information model
  • ISO 12966-3:2009 Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl esters. Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH)
  • ISO/IEC 13156:2009 Information technology. Telecommunications and information exchange between systems. High Rate 60 GHz PHY, MAC and HDMI PAL
  • ISO/IEC 13560:2009 Information technology. Telecommunications and information exchange between systems. Procedure for the registration of assigned numbers for ISO/IEC 26907 and ISO/IEC 26908
  • ISO/TR 13624-2:2009 Petroleum and natural gas industries. Drilling and production equipment. Deepwater drilling riser methodologies, operations, and integrity technical report
  • ISO 13628-5:2009 (Edition 2) Petroleum and natural gas industries. Design and operation of subsea production systems. Subsea umbilicals
  • ISO 13655:2009 (Edition 2) Graphic technology. Spectral measurement and colorimetric computation for graphic arts images
  • ISO/IEC 13888-3:2009 (Edition 2) Information technology. Security techniques. Non-repudiation. Mechanisms using asymmetric techniques
  • ISO 13967:2009 (Edition 2) Thermoplastics fittings. Determination of ring stiffness
  • ISO/IEC 14496-3:2009 Information technology. Coding of audio-visual objects. Audio
    AMENDMENT 1:December 2009
  • ISO/IEC 14496-4:2004 (CD-ROM) Information technology. Coding of audio-visual objects. Conformance testing
    AMENDMENT 37:December 2009
  • ISO 14713-1:2009 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. General principles of design and corrosion resistance
  • ISO 14713-2:2009 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Hot dip galvanizing
  • ISO 14713-3:2009 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Sherardizing
  • ISO/IEC 14776-326:2002 Information technology. Small computer system interface (SCSI). Reduced block commands (RBC)
    CORRIGENDUM 1:November 2009
  • ISO/IEC 14776-453:2009 Information technology. Small computer system interface (SCSI). Primary commands-3 (SPC-3)
  • ISO 15136-1:2009 (CD-ROM) (Edition 2) Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Pumps
  • ISO/IEC 15408-1:2009 (Edition 3) Information technology. Security techniques. Evaluation criteria for IT security. Introduction and general model
  • ISO/IEC 15946-5:2009 Information technology. Security techniques. Cryptographic techniques based on elliptic curves. Elliptic curve generation
  • ISO 16000-23:2009 Indoor air. Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials
  • ISO 16000-24:2009 Indoor air. Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials
  • ISO/IEC 16326:2009 Systems and software engineering. Life cycle processes. Project management
  • ISO 17103:2009 (Edition 2) Agricultural machinery. Rotary disc mowers, rotary drum mowers and flail mowers. Test methods and acceptance criteria for protective skirts
  • ISO 18113-1:2009 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). Terms, definitions and general requirements
  • ISO 18113-2:2009 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). In vitro diagnostic reagents for professional use
  • ISO 18113-3:2009 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). In vitro diagnostic instruments for professional use
  • ISO 18113-5:2009 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling). In vitro diagnostic instruments for self-testing
  • ISO 18592:2009 Resistance welding. Destructive testing of welds. Method for the fatigue testing of multispot-welded specimens
  • ISO/IEC 19757-7:2009 Information technology. Document Schema Definition Languages (DSDL). Character Repertoire Description Language (CREPDL)
  • ISO/IEC 19776-1:2009 (CD-ROM) (Edition 2) Information technology. Computer graphics, image processing and environmental data representation. Extensible 3D (X3D) encodings. Extensible Markup Language (XML) encoding
  • ISO 19901-6:2009 Petroleum and natural gas industries. Specific requirements for offshore structures. Marine operations
  • ISO/IEC 20926:2009 (Edition 2) Software and systems engineering. Software measurement. IFPUG functional size measurement method 2009
  • ISO 21438-2:2009 Workplace atmospheres. Determination of inorganic acids by ion chromatography. Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid)
  • ISO 21610:2009 Corrosion of metals and alloys. Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
  • ISO 22006:2009 Quality management systems. Guidelines for the application of ISO 9001:2008 to crop production
  • ISO 22199:2009 (Edition 2) Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Emission
  • ISO 22391-1:2009 (Edition 2) Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). General
  • ISO 22391-2:2009 (Edition 2) Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Pipes
  • ISO 22391-3:2009 (Edition 2) Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Fittings
  • ISO 22391-5:2009 (Edition 2) Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT). Fitness for purpose of the system
  • ISO/TR 22957:2009 Document management. Analysis, selection and implementation of electronic document management systems (EDMS)
  • ISO 22958:2005 Textiles. Water resistance. Rain tests. Exposure to a horizontal water spray
    CORRIGENDUM 1:October 2009
  • ISO/IEC 23001-4:2009 Information technology. MPEG systems technologies. Codec configuration representation
  • ISO/TR 23605:2009 Technical product specification (TPS). Application guidance. International model for national implementation
  • ISO 23954:2009 Oil of lime expressed. Persian type (Citrus latifolia Tanaka)
  • ISO 24095:2009 Workplace air. Guidance for the measurement of respirable crystalline silica
  • ISO 24333:2009 Cereals and cereal products. Sampling
  • ISO/IEC TR 24766:2009 Information technology. Systems and software engineering. Guide for requirements engineering tool capabilities
  • ISO/IEC 24786:2009 Information technology. User interfaces. Accessible user interface for accessibility settings
  • ISO 26428-9:2009 Digital cinema (D-cinema) distribution master. Image pixel structure level 3. Serial digital interface signal formatting
  • ISO 26429-8:2009 Digital cinema (D-cinema) packaging. Packing list
  • ISO 26429-9:2009 Digital cinema (D-cinema) packaging. Asset mapping and file segmentation
  • ISO 26429-10:2009 Digital cinema (D-cinema) packaging. Stereoscopic picture track file
  • ISO 26430-4:2009 (CD-ROM) Digital cinema (D-cinema) operations. Log record format specification
  • ISO 26430-5:2009 (CD-ROM) Digital cinema (D-cinema) operations. Security log event class and constraints
  • ISO 26430-6:2009 Digital cinema (D-cinema) operations. Auditorium security messages for intra-theater communications
  • ISO 26430-9:2009 Digital cinema (D-cinema) operations. Key delivery bundle
  • ISO 26433:2009 (CD-ROM) Digital cinema (D-cinema). XML data types
  • ISO/IEC 26907:2009 (Edition 2) Information technology. Telecommunications and information exchange between systems. High Rate Ultra Wideband PHY and MAC Standard
  • ISO/IEC 26908:2009 (Edition 2) Information technology. Telecommunications and information exchange between systems. MAC-PHY interface for ISO/IEC 26907
  • ISO/IEC 27004:2009 Information technology. Security techniques. Information security management. Measurement
  • ISO/IEC 27033-1:2009 Information technology. Security techniques. Network security. Overview and concepts
  • ISO 27894:2009 Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges
  • ISO 27895:2009 Vacuum technology. Valves. Leak test
  • ISO/HL7 27951:2009 (CD-ROM) Health informatics. Common terminology services. Release 1
  • ISO 28741:2009 Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions
    CORRIGENDUM 1:December 2009
  • ISO 28927-1:2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Angle and vertical grinders
  • ISO 28927-2:2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Wrenches, nutrunners and screwdrivers
  • ISO 28927-3:2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Polishers and rotary, orbital and random orbital sanders
  • ISO 28927-5:2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Drills and impact drills
  • ISO 28927-6:2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Rammers
  • ISO 28927-7:2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Nibblers and shears
  • ISO 28927-8:2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action
  • ISO 28927-9:2009 Hand-held portable power tools. Test methods for evaluation of vibration emission. Scaling hammers and needle scalers
  • ISO/TS 29002-4:2009 (CD-ROM) Industrial automation systems and integration. Exchange of characteristic data. Basic entities and types
  • ISO/TS 29002-10:2009 (CD-ROM) Industrial automation systems and integration. Exchange of characteristic data. Characteristic data exchange format
  • ISO/TS 29002-31:2009 (CD-ROM) Industrial automation systems and integration. Exchange of characteristic data. Query for characteristic data
  • ISO/IEC TR 29163-1:2009 Information technology. Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition. Overview Version 1.1
  • ISO/IEC TR 29163-2:2009 Information technology. Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition. Content Aggregation Model Version 1.1
  • ISO/IEC TR 29163-3:2009 Information technology. Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition. Run-Time Environment Version 1.1
  • ISO/IEC TR 29163-4:2009 Information technology. Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition. Sequencing and Navigation Version 1.1
  • ISO 29681:2009 Paper, board and pulps. Determination of pH of salted water extracts
  • ISO 29804:2009 Thermal insulation products for building applications. Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material

ISO/PAS PUBLICATIONS

  • ISO/PAS 12868:2009 Geometrical product specification (GPS). Coordinate measuring machines (CMM). Testing the performance of CMMs using single-stylus contacting probing systems
  • ISO/PAS 13396:2009 Road vehicles. Sled test method to enable the evaluation of side impact protection of child restraint systems. Essential parameters

Published in international.