IEC PUBLICATIONS

You can now purchase PDFs of IEC Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. IEC Standards in hardcopy format are also available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the IEC button in the search panel.

  • IEC 60034-18-32:2010 Rotating electrical machines Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation by electrical endurance
  • IEC 60050-445:2010 (Edition 2) International electrotechnical vocabulary. Time relays
  • IEC 60079-13:2010 Explosive atmospheres. Equipment protection by pressurized room 'p'
  • IEC 60079-29-4:2009 Explosive atmospheres. Gas detectors. Performance requirements of open path detectors for flammable gases
    CORRIGENDUM 1:August 2010
  • IEC 60122-3:2010 (Edition 4) Quartz crystal units of assessed quality. Standard outlines and lead connections
  • IEC 60191-6-18:2010 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for ball grid array (BGA)
    CORRIGENDUM 1:May 2010
  • IEC 60191-6-18:2010 Mechanical standardization of semiconductor devices. General rules for the preparation of outline drawings of surface mounted semiconductor device packages. Design guide for ball grid array (BGA)
    CORRIGENDUM 2:July 2010
  • IEC 60335-2-103:2010 Household and similar electrical appliances. Safety. Particular requirements for drives for gates, doors and windows
    AMENDMENT 1:October 2010
  • IEC 60349-1:2010 (Edition 2) Electric traction. Rotating electrical machines for rail and road vehicles. Machines other than electronic converter-fed alternating current motors
  • IEC 60349-2:2010 (Edition 3) Electric traction. Rotating electrical machines for rail and road vehicles. Electronic converter fed alternating current motors
  • IEC 60444-11:2010 Measurement of quartz crystal unit parameters. Standard method for the determination of the load resonance frequency fL and the effective load capacitance CLeff/sub using automatic network analyzer techniques and error correction
  • IEC 60601-2-50:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of infant phototherapy equipment
    CORRIGENDUM 1:August 2010
  • IEC 60601-2-52:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of medical beds
    CORRIGENDUM 1:September 2010
  • IEC 60695-2-12:2010 (Edition 2) Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire flammability index (GWFI) test method for materials
  • IEC 60695-2-13:2010 (Edition 2) Fire hazard testing. Glowing/hot-wire based test methods. Glow-wire ignition temperature (GWIT) test method for materials
  • IEC 60728-13:2010 Cable networks for television signals, sound signals and interactive services. Optical systems for broadcast signal transmissions
    CORRIGENDUM 1:August 2010
  • IEC 60749-15:2010 (Edition 2) Semiconductor devices. Mechanical and climatic test methods. Resistance to soldering temperature for through-hole mounted devices
  • IEC 60749-34:2010 (Edition 2) Semiconductor devices. Mechanical and climatic test methods. Power cycling
  • IEC/TS 61000-3-5:2009 Electromagnetic compatibility (EMC). Limits. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
    CORRIGENDUM 2:May 2010
  • IEC 61000-4-11:2004 Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests
    INTERPRETATION SHEET 1:August 2010
  • IEC 61000-4-22:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated emissions and immunity measurements in fully anechoic rooms (FARs)
  • IEC 61169-14:2010 Radio-frequency connectors. R.F. coaxial connectors with inner diameter of outer conductor 12 mm with screw coupling. Characteristic impedance 75 ohms (Type 3,5/12)
  • IEC 61236:2010 (Edition 2) Live working. Saddles, stick clamps and their accessories
  • IEC 61300-2-9:2010 (Edition 2) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Shock
  • IEC 61300-2-47:2010 (Edition 3) Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Thermal shocks
  • IEC 61347-2-12:2005 Lamp controlgear. Particular requirements for D.C. or A.C. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
    AMENDMENT 1:September 2010
  • IEC 61400-1:2005 Wind turbines. Design requirements
    AMENDMENT 1:October 2010
  • IEC/TR 61439-0:2010 Low-voltage switchgear and controlgear assemblies. Guidance to specifying assemblies
  • IEC 61967-6:2002 Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Measurement of conducted emissions. Magnetic probe method
    CORRIGENDUM 1:August 2010
  • IEC 62006:2010 Hydraulic machines. Acceptance tests of small hydroelectric installations
  • IEC/TS 62257-7-1:2010 (Edition 2) Recommendations for small renewable energy and hybrid systems for rural electrification. Generators. Photovoltaic generators
  • IEC 62359:2010 (Edition 2) Ultrasonics. Field characterization. Test methods for the determination of thermal and mechanical indices related to medical diagnostic ultrasonic fields
  • IEC/TR 62433-2-1:2010 EMC IC modelling. Theory of black box modelling for conducted emission
  • IEC 62502:2010 Analysis techniques for dependability. Event tree analysis (ETA) Event Tree Analysis
  • IEC 62642-2-2:2010 Alarm systems. Intrusion and hold-up systems. Intrusion detectors. Passive infra red detectors
  • IEC 62642-3:2010 Alarm systems. Intrusion and hold-up systems. Control and indicating equipment
  • IEC 62642-4:2010 Alarm systems. Intrusion and hold-up systems. Warning devices
  • IEC 62642-5-3:2010 Alarm systems. Intrusion and hold-up systems. Interconnections. Requirements for equipment using radio frequency techniques
  • IEC/TR 62678:2010 Audio, video and multimedia systems and equipment activities and considerations related to accessibility and usability
  • IEC 80001-1:2010 Application of risk management for IT-networks incorporating medical devices. Roles, responsibilities and activities
  • IEC 80601-2-30:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
    CORRIGENDUM 1:January 2010
  • IEC CISPR 16-1-1:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Measuring apparatus
    CORRIGENDUM 1:October 2010
  • IEC GUIDE 117:2010 Electrotechnical equipment. Temperatures of touchable hot surfaces

Published in international.