AUSTRALIAN STANDARDS

To purchase PDF or hard copy Australian Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • AS 3740-2010 Waterproofing of domestic wet areas
    Sets out minimum requirements for the materials, design and installation of waterproofing for domestic wet areas.
    Supersedes AS 3740-2004
  • AS 3745-2010 Planning for emergencies in facilities
    Outlines the minimum requirements for the establishment, validation and implementation of an emergency plan for a facility to provide for the safety of occupants of that facility and its visitors leading up to, and during an evacuation.
    Supersedes AS 3745-2002
  • AS 3818.2-2010 Timber – Heavy structural products – Visually graded – Railway track timbers
    Provides producers and users of railway track timbers with requirements for the visual grading and selection of species for such timbers intended for use in railway track.
    Supersedes AS 3818.2-2004
  • AS 3818.3-2010 Timber – Heavy structural products  Visually graded – Piles
    Proposes to provide producers and users of piles with requirements for the visual grading and selection of species for timbers intended for use as piling in marine applications (salt or brackish water) or in other than marine applications (land or freshwater).
    Supersedes AS 3818.3-2001
  • AS 3818.4-2010 Timber – Heavy structural products – Visually graded – Cross-arms for overhead lines
    Sets out the minimum requirements for visual grading of cross-arms intended for use in supporting overhead utility services. These minimum requirements apply at the time of grading.
    Supersedes AS 3818.4-2003
  • AS 3818.5-2010 Timber – Heavy structural products – Visually graded – Mine lift guides
    Sets out the minimum requirements for visual grading of mine lift guides intended for use as guides for lift cages in mine shafts. These minimum requirements apply at the time of grading.
    Supersedes AS 3818.5-2003
  • AS 3818.6-2010 Timber – Heavy structural products – Visually graded – Decking for wharves and bridges
    Sets out the minimum requirements for visual grading of decking intended for use as decking for wharves and bridges where the nominal thickness of the decking is 70 mm or greater. These requirements apply at the time of grading. This Standard is intended to cover timbers for commercial, industrial and marine decking subject to vehicular traffic, such as for road bridges and shipping wharves.
    Supersedes AS 3818.6-2003
  • AS 3818.7-2010 Timber – Heavy structural products – Visually graded – Large cross-section sawn hardwood engineering timbers
    Sets out the minimum requirements for visually graded large cross-section sawn hardwood engineering timbers greater than 0.016 m2 in cross-section. These minimum requirements apply at the time of grading.
    Supersedes AS 3818.7-2006
  • AS 3818.8-2010 Timber – Heavy structural products – Visually graded – Stumps and sole plates
    Sets out the minimum requirements for visually graded sawn and natural round timber stumps and sawn sole plates intended for use in contact with the ground. It applies to softwood and hardwood species and to treated and untreated timber. These minimum requirements apply at the time of grading.
    Supersedes AS 3818.8-2005
  • AS 3818.9-2010 Timber – Heavy structural products – Visually graded – Natural round treated hardwood corbels, girders and stringers
    Sets out the minimum requirements for natural round treated hardwood corbels, girders and stringers intended primarily for use in heavy engineering projects (e.g., bridges, wharves and large timber-framed buildings). These minimum requirements apply at the time of grading.
  • AS 3818.10-2010 Timber – Heavy structural products – Visually graded – Building poles
    Sets out the minimum requirements for visually graded timber building poles with or without full-length preservative treatment, intended primarily for use in the framework (internal or external) of a building. These minimum requirements apply at the time of grading.
  • AS 4122-2010 (Reference Use Only) General Conditions of Contract for Consultants
    Provides general conditions of contract for the engagement of consultants, particularly in the construction industry. The Standard sets out the general obligations governing the relationship between these consultants and their clients. It is not suitable for a design and construct project procurement method.
    Supersedes AS 4122-2000 (Reference Use Only)
  • AS 4122-2010 (Reusable PDF) General Conditions of Contract for Consultants
    Provides general conditions of contract for the engagement of consultants, particularly in the construction industry. The Standard sets out the general obligations governing the relationship between these consultants and their clients. It is not suitable for a design and construct project procurement method.
  • AS 4741-2010 Testing of connections to low voltage electricity networks
    Sets out the minimum principles and tests required to confirm that the connections within a low voltage electricity network affecting the polarity or neutral integrity of the electricity network or supply to any electrical installation from that network are correct. This Standard applies to both permanent and temporary arrangements.
  • AS 4773.1-2010 Masonry in small buildings – Design
    Sets out minimum requirements for the design of unreinforced and reinforced masonry for use in small buildings.
    Supersedes AS 3700-2001, in part
  • AS 5013.14.1-2010 Food microbiology – Microbiology of food and animal feeding stuffs – General requirements and guidance for microbiological examinations
    (ISO 7218:2007, MOD)
    This Appendix lists the normative variations to ISO 7218:2007, which are required for Australian conditions.
    Supersedes AS 5013.14-2004
  • AS 5156-2010 Electronic speed limit signs
    Covers electronic speed limit signs composed of discrete light-emitting elements intended to be permanently mounted or portable, adjacent to or over roadways, for the primary purpose of communicating speed restrictions to approaching road users. It specifies requirements for the design, construction, performance and certain aspects of the installation of electronic speed limit signs, including their associated control systems.

Superseded Standards

  • AS 3700-2001 Masonry structures
    Superseded by AS 4773.1-2010
  • AS 3740-2004 Waterproofing of wet areas within residential buildings
    Superseded by AS 3740-2010
  • AS 3745-2002 Emergency control organization and procedures for buildings, structures and workplaces
    Superseded by AS 3745-2010
  • AS 3818.2-2004 Timber – Heavy structural products – Visually graded – Railway track timbers
    Superseded by AS 3818.2-2010
  • AS 3818.3-2001 Timber – Heavy structural products – Visually graded – Piles
    Superseded by AS 3818.3-2010
  • AS 3818.4-2003 Timber – Heavy structural products – Visually graded – Cross-arms for overhead lines
    Superseded by AS 3818.4-2010
  • AS 3818.5-2003 Timber – Heavy structural products – Visually graded – Mine lift guides
    Superseded by AS 3818.5-2010
  • AS 3818.6-2003 Timber – Heavy structural products – Visually graded – Decking for wharves and bridges
    Superseded by AS 3818.6-2010
  • AS 3818.7-2006 Timber – Heavy structural products – Visually graded – Large cross-section sawn hardwood engineering timbers
    Superseded by AS 3818.7-2010
  • AS 3818.8-2005 Timber – Heavy structural products – Visually graded – Stumps and sole plates
    Superseded by AS 3818.8-2010
  • AS 4122-2000 (Reference Use Only) General conditions of contract for engagement of consultants
    Superseded by AS 4122-2010 (Reference Use Only)
  • AS 5013.14-2004 Food microbiology – Microbiology of food and animal feeding stuffs – General rules for microbiological examinations
    Superseded by AS 5013.14.1-2010

Published in international.