BRITISH STANDARDS

You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs. British Standard publications in hardcopy format are also available for purchase from our website www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel.

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 5733:2010 General requirements for electrical accessories. Specification
    Supersedes BS 5733:1995 which remains current
  • BS 8418:2010 Installation and remote monitoring of detector activated CCTV systems. Code of practice
    Supersedes BS 8418:2003 which remains current
  • BS 8423:2010 Fireguards for fires and heating appliances for domestic use. Specification
    Supersedes BS 8423:2002
  • BS 8530:2010 Traditional-style half round, beaded half round, Victorian ogee and moulded ogee aluminium rainwater systems. Specification
    Supersedes BS 2997:1958

BS EN publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European Standard. You can now purchase PDFs of British Standards from Standards New Zealand – please email enquiries@standards.co.nz or call 0800 782 632 during business hours to order PDFs.

  • BS EN 3-10:2009 Portable fire extinguishers. Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
    Supersedes BS EN 3-6:1996
  • BS EN 131-2:2010 Ladders. Requirements, testing, marking
    Supersedes BS EN 131-2:1993
  • BS EN ISO 179-1:2010 Plastics. Determination of Charpy impact properties. Non-instrumented impact test
    Supersedes BS EN ISO 179-1:2001
  • BS EN 257:2010 Mechanical thermostats for gas-burning appliances
    Supersedes BS EN 257:1992
  • BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
    Supersedes BS EN 20286-2:1993
  • BS EN 384:2010 Structural timber. Determination of characteristic values of mechanical properties and density
    Supersedes BS EN 384:2004
  • BS EN 438-9:2010 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for alternative core laminates
  • BS EN 843-7:2010 Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. C-ring tests
  • BS EN 843-8:2010 Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature. Guidelines for conducting proof tests
  • BS EN 894-4:2010 Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Location and arrangement of displays and control actuators
  • BS EN 1014-1:2010 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Procedure for sampling creosote
    Supersedes BS EN 1014-1:1995
  • BS EN 1014-2:2010 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Procedure for obtaining a sample of creosote from creosoted timber for subsequent analysis
    Supersedes BS EN 1014-2:1996
  • BS EN 1014-3:2010 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the benzo(a)pyrene content of creosote
    Supersedes BS EN 1014-3:1998
  • BS EN 1014-4:2010 Wood preservatives. Creosote and creosoted timber. Methods of sampling and analysis. Determination of the water-extractable phenols content of creosote
    Supersedes BS EN 1014-4:1996
  • BS EN 1097-2:2010 Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation
    Supersedes BS EN 1097-2:1998
  • BS EN ISO 1211:2010 Milk. Determination of fat content. Gravimetric method (Reference method)
    Supersedes the dual numbered standard BS EN ISO 1211:2001, BS 1741-3:2001
  • BS EN 1816:2010 Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing
    Supersedes BS EN 1816:1998
  • BS EN 1817:2010 Resilient floor coverings. Specification for homogeneous and heterogeneous smooth rubber floor coverings
    Supersedes BS EN 1817:1998
  • BS EN 2997-009:2010 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Protective cover for receptacle. Product standard
    Supersedes BS EN 2997-009:2006
  • BS EN 2997-010:2010 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Protective cover for plug. Product standard
    Supersedes BS EN 2997-010:2006
  • BS EN 2997-011:2010 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Dummy receptacle. Product standard
    Supersedes BS EN 2997-011:2006
  • BS EN ISO 3210:2010 Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution
    Supersedes BS EN 12373-6:1999 and BS EN 12373-7:2002
  • BS EN 3264:2010 Aerospace series. Pipe coupling 8°30' in titanium alloy. Thrust wire nuts
    Supersedes BS EN 3264:2001
  • BS EN 3660-010:2010 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style K, straight, shielded, sealed, for heat shrinkable boot. Product standard
  • BS EN 3838:2010 Aerospace series. Requirements and tests on user-applied markings on aircraft electrical cables
  • BS EN 4115:2010 Aerospace series. Cushion, rubber for clamps. Dimensions, masses
    Supersedes BS EN 4115:2001
  • BS EN ISO 4498:2010 Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness
    Supersedes BS EN ISO 4498:2007
  • BS EN ISO 4787:2010 Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use
    Supersedes BS 1797:1987 and BS 6696:1986
  • BS EN ISO 7231:2010 Polymeric materials, cellular, flexible. Determination of air flow value at constant pressure-drop
    Supersedes BS EN ISO 7231:1998
  • BS EN ISO 7599:2010 Anodizing of aluminium and its alloys. General specifications for anodic oxidation coatings on aluminium
    Supersedes BS EN 12373-1:2001
  • BS EN 9104-003:2010 Aerospace series. Quality management systems. Requirements for aerospace quality management system (AQMS) auditor training and qualification
    Supersedes BS EN 9104-003:2009
  • BS EN 9120:2010 Quality management systems. Requirements for aviation, space and defence distributors
    Supersedes BS EN 9120:2005
  • BS EN ISO 9444-2:2010 Continuously hot-rolled stainless steel. Tolerances on dimensions and form. Wide strip and sheet/plate
  • BS EN ISO 10423:2009 Petroleum and natural gas industries. Drilling and production equipment. Wellhead and christmas tree equipment CD-ROM
    Supersedes BS EN ISO 10423:2004
  • BS EN ISO 10451:2010 Dentistry. Contents of technical file for dental implant systems
    Supersedes BS EN ISO 10451:2002
  • BS EN ISO 10765:2010 Footwear. Test method for the characterization of elastic materials. Tensile performance
  • BS EN ISO 10768:2010 Footwear. Test method for the determination of the resistance of elastic materials for footwear to repeated extension. Fatigue resistance
  • BS EN ISO 11130:2010 Corrosion of metals and alloys. Alternate immersion test in salt solution
    Supersedes BS EN ISO 11130:1999
  • BS EN ISO 12099:2010 Animal feeding stuffs, cereals and milled cereal products. Guidelines for the application of near infrared spectrometry
  • BS EN 12288:2010 Industrial valves. Copper alloy gate valves
    Supersedes BS EN 12288:2003
  • BS EN 12311-2:2010 Flexible sheets for waterproofing. Determination of tensile properties. Plastic and rubber sheets for roof waterproofing
    Supersedes BS EN 12311-2:2000
  • BS EN 12317-2:2010 Flexible sheets for waterproofing. Determination of shear resistance of joints. Plastic and rubber sheets for roof waterproofing
    Supersedes BS EN 12317-2:2000
  • BS EN 13245-1:2010 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Designation of PVC-U profiles
    Supersedes BS EN 13245-1:2004
  • BS EN ISO 13709:2009 Centrifugal pumps for petroleum, petrochemical and natural gas industries CD-ROM
    Supersedes BS EN ISO 13709:2003
  • BS EN 13798:2010 Hydrometry. Specification for a reference rain gauge pit
    Supersedes BS EN 13798:2002
  • BS EN 13859-1:2010 Flexible sheets for waterproofing. Definitions and characteristics of underlays. Underlays for discontinuous roofing
    Supersedes BS EN 13859-1:2005+A1:2008
  • BS EN ISO 13967:2009 Thermoplastics fittings. Determination of ring stiffness
  • BS EN 14081-2:2010 Timber structures. Strength graded structural timber with rectangular cross section. Machine grading. Additional requirements for initial type testing
    Supersedes BS EN 14081-2:2005
  • BS EN 14151:2010 Geosynthetics. Determination of burst strength
  • BS EN ISO 14245:2010 Gas cylinders. Specifications and testing of LPG cylinder valves. Self-closing
    Supersedes BS EN 13152:2002 and BS ISO 14245:2006
  • BS EN 14425-3:2010 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Chevron notched beam (CNB) method
    Supersedes DD CEN/TS 14425-3:2003
  • BS EN 14490:2010 Execution of special geotechnical works. Soil nailing
    Partially supersedes BS 8006:1995
  • BS EN 14635:2010 Glass packaging. 26 H 126 crown finish. Dimensions
    Supersedes BS EN 14635:2006
  • BS EN ISO 15136-1:2009 Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift. Pumps CD-ROM
    Supersedes BS EN ISO 15136-1:2001
  • BS EN ISO 15653:2010 Metallic materials. Method of test for the determination of quasistatic fracture toughness of welds
    Supersedes BS 7448-2:1997
  • BS EN 15664-2:2010 Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of metal release. Test waters
  • BS EN 15727:2010 Ventilation for buildings. Ducts and ductwork components, leakage classification and testing
  • BS EN 15761:2009 Pre-shaped growing media. Determination of length, width, height, volume and bulk density
  • BS EN 15823:2010 Packaging. Braille on packaging for medicinal products
    Supersedes DD 264:2007
  • BS EN 15860:2010 Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods
  • BS EN ISO 15995:2010 Gas cylinders. Specifications and testing of LPG cylinder valves. Manually operated
    Supersedes BS EN 13153:2002 and BS ISO 15995:2006
  • BS EN ISO 17078-4:2010 Petroleum and natural gas industries. Drilling and production equipment. Practices for sidepocket mandrels and related equipment CD-ROM
  • BS EN ISO 17264:2009 Intelligent transport systems. Automatic vehicle and equipment identification. Interfaces
  • BS EN ISO 17678:2010 Milk and milk products. Determination of milk fat purity by gas chromatographic analysis of triglycerides (Reference method)
  • BS EN ISO 18286:2010 Hot-rolled stainless steel plates. Tolerances on dimensions and shape
  • BS EN ISO 21258:2010 Stationary source emissions. Determination of the mass concentration of dinitrogen monoxide (N2O). Reference method. Non-dispersive infrared method
  • BS EN ISO 21549-8:2010 Health informatics. Patient healthcard data. Links
  • BS EN ISO 25178-601:2010 Geometrical product specifications (GPS). Surface texture. Areal. Nominal characteristics of contact (stylus) instruments
  • BS EN ISO 25178-602:2010 Geometrical product specifications (GPS). Surface texture. Areal. Nominal characteristics of non-contact (confocal chromatic probe) instruments
  • BS EN ISO 25178-701:2010 Geometrical product specifications (GPS). Surface texture. Areal. Calibration and measurement standards for contact (stylus) instruments
  • BS EN ISO 28158:2010 Dentistry. Integrated dental floss and handles
  • BS EN 50215:2009 Railway applications. Rolling stock. Testing of rolling stock on completion of construction and before entry into service
    Supersedes BS EN 50215:1999
  • BS EN 50491-3:2009 General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). Electrical safety requirements
    Partially supersedes BS EN 50090-2-2:1996+A2:2007
  • BS EN 50491-5-1:2010 General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements, conditions and test set-up
    Partially supersedes BS EN 50090-2-2:1996+A2:2007
  • BS EN 50491-5-2:2010 General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements for HBES/BACS used in residential, commercial and light industry environment
    Partially supersedes BS EN 50090-2-2:1996+A2:2007
  • BS EN 50491-5-3:2010 General requirements for home and building electronic systems (HBES) and building automation and control systems (BACS). EMC requirements for HBES/BACS used in industry environment
    Partially supersedes BS EN 50090-2-1:1996+A2:2007
  • BS EN 55016-1-4:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Antennas and test sites for radiated disturbance measurements
    Supersedes BS EN 55016-1-4:2007+A2:2009 which remains current
  • BS EN 55016-2-3:2010 Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity. Radiated disturbance measurements
    Supersedes BS EN 55016-2-3:2006 which remains current
  • BS EN 60255-151:2009 Measuring relays and protection equipment. Functional requirements for over/under current protection
    Supersedes BS EN 60255-3:1998 which remains current
  • BS EN 60300-3-15:2009 Dependability management. Application guide. Engineering of system dependability
    Supersedes BS IEC 61713:2000
  • BS EN 60318-4:2010 Electroacoustics. Simulators of human head and ear. Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts
    Supersedes BS 6310:1982
  • BS EN 60335-2-24:2010 Household and similar electrical appliances. Safety. Particular requirements for refrigerating appliances, ice-cream appliances and ice makers
    Supersedes BS EN 60335-2-24:2003+A2:2007
  • BS EN 60335-2-109:2010 Household and similar electrical appliances. Safety. Particular requirements for UV radiation water treatment appliances
  • BS EN 60512-19-1:2010 Connectors for electronic equipment. Tests and measurements. Chemical resistance tests. Test 19a. Fluid resistance of pre-insulated crimp barrels
    Supersedes BS 5772-9:1993 which remains current
  • BS EN 60601-1-11:2010 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
  • BS EN 60603-7-2:2010 Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz
    Supersedes BS EN 60603-7-2:2009
  • BS EN 60875-1:2010 Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices. Generic specification
    Supersedes BS EN 60875-1:2001
  • BS EN 61076-2-107:2010 Connectors for electronic equipment. Product requirements. Detail specification for circular hybrid connectors M12 with electrical and fibreoptic contacts with screw locking
    Supersedes DD IEC/PAS 61076-2-107:2007
  • BS EN 61108-3:2010 Maritime navigation and radiocommunication equipment and systems. Global navigation satellite systems (GNSS). Galileo receiver equipment. Performance requirements, methods of testing and required test results
  • BS EN 61300-2-24:2010 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Screen testing of ceramic alignment split sleeve by stress application
    Supersedes BS EN 61300-2-24:2000
  • BS EN 61850-7-4:2010 Communication networks and systems for power utility automation. Basic communication structure. Compatible logical node classes and data object classes
    Supersedes BS EN 61850-7-4:2003
  • BS EN 61907:2010 Communication network dependability engineering
  • BS EN 61937-11:2010 Digital audio. Interface for non-linear PCM encoded audio bitstreams applying IEC 60958. MPEG-4 AAC and its extensions in LATM/LOAS
  • BS EN 62343-3-1:2010 Dynamic modules. Performance specification templates. Dynamic channel equalizers
  • BS EN 62591:2010 Industrial communication networks. Wireless communication network and communication profiles. WirelessHART™
    Supersedes DD IEC/PAS 62591:2009

BS ENs implemented by amendment

  • BS EN 62340:2010 Nuclear power plants. Instrumentation and control systems important to safety. Requirements for coping with common cause failure (CCF)
    Implementation of European Standard EN 62340 by amendment to BS IEC 62340:2007

BS implementations

BS implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 690:2010 Information and documentation. Guidelines for bibliographic references and citations to information resources
    Supersedes BS 1629:1989 and BS ISO 690-2:1997
  • BS ISO 1222:2010 Photography. Tripod connections
    Supersedes BS ISO 1222:2003
  • BS ISO 2575:2010 Road vehicles. Symbols for controls, indicators and telltales CD-ROM
    Supersedes BS ISO 2575:2004+A4:2009
  • BS ISO 2962:2010 Cheese and processed cheese products. Determination of total phosphorus content. Molecular absorption spectrometric method
    Supersedes BS 770-6:1984
  • BS ISO 4190-1:2010 Lift (Elevator) installation. Class I, II, III and VI lifts
    Supersedes BS ISO 4190-1:1999
  • BS ISO 5151:2010 Non-ducted air conditioners and heat pumps. Testing and rating for performance
  • BS ISO 5546:2010 Caseins and caseinates. Determination of pH (Reference method)
    Supersedes BS 6248-4:1982
  • BS ISO 5597:2010 Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
    Supersedes BS 5751:1987
  • BS ISO 5630-5:2008 Paper and board. Accelerated ageing. Exposure to elevated temperature at 100 °C
  • BS ISO 5631-1:2009 Paper and board. Determination of colour by diffuse reflectance. Indoor daylight conditions (C/2°)
    Supersedes BS ISO 5631:2000
  • BS ISO 5631-3:2008 Paper and board. Determination of colour by diffuse reflectance. Indoor illumination conditions (D50/2°)
  • BS ISO 5721:1989 Tractors for agriculture. Operator's field of vision
    Supersedes BS 6389:1983
  • BS ISO 6091:2010 Dried milk. Determination of titratable acidity (Reference method)
    Supersedes BS 1743-7.1:1982
  • BS ISO 6732:2010 Milk and milk products. Determination of iron content. Spectrometric method (Reference method)
    Supersedes BS 6394-2:1985
  • BS ISO 7206-4:2010 Implants for surgery. Partial and total hip joint prostheses. Determination of endurance properties and performance of stemmed femoral components
    Supersedes BS ISO 7206-4:2002
  • BS ISO 8216-1:2010 Petroleum products. Fuels (class F) classification. Categories of marine fuels
    Supersedes BS ISO 8216-1:2005
  • BS ISO 8217:2010 Petroleum products. Fuels (class F). Specifications of marine fuels
    Supersedes BS ISO 8217:2005
  • BS ISO 8443:2010 Rolling bearings. Radial ball bearings with flanged outer ring. Flange dimensions
  • BS ISO 9336-1:2010 Optics and photonics. Optical transfer function. Application. Interchangeable lenses for 35 mm still cameras
    Supersedes BS ISO 9336-1:1994
  • BS ISO 9533:2010 Earth-moving machinery. Machine-mounted audible travel alarms and forward horns. Test methods and performance criteria
    Supersedes BS 6912-3:1990
  • BS ISO/IEC 9798-1:2010 Information technology. Security techniques. Entity authentication. General
    Supersedes BS ISO/IEC 9798-1:1997
  • BS ISO 10579:2010 Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
    Supersedes BS ISO 10579:1993
  • BS ISO 10638:2010 Rubber. Identification of antidegradants by gas chromatography/mass spectrometry
  • BS ISO 10681-1:2010 Road vehicles. Communication on FlexRay. General information and use case definition
  • BS ISO 10681-2:2010 Road vehicles. Communication on FlexRay. Communication layer services
  • BS ISO 10710:2010 Water quality. Growth inhibition test with the marine and brackish water macroalga Ceramium tenuicorne
  • BS ISO 10872:2010 Water quality. Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda)
  • BS ISO 10932:2010 Milk and milk products. Determination of the minimal inhibitory concentration (MIC) of antibiotics applicable to bifidobacteria and nonenterococcal lactic acid bacteria (LAB)
  • BS ISO 10961:2010 Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection
  • BS ISO 11001-2:1993 Agricultural wheeled tractors and implements. Three-point hitched couplers. A-frame coupler
  • BS ISO 11001-4:1994 Agricultural wheeled tractors and implements. Three-point hitch couplers. Bar coupler
  • BS ISO 11471:1995 Agricultural tractors and machinery. Coding of remote hydraulic power services and controls
  • BS ISO 11639:2010 Aerospace. Part numbering for hose assemblies
  • BS ISO 11684:1995 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Safety signs and hazard pictorials. General principles
  • BS ISO 11704:2010 Water quality. Measurement of gross alpha and beta activity concentration in non-saline water. Liquid scintillation counting method
  • BS ISO 12151-1:2010 Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-3 O-ring face seal ends
    Supersedes BS ISO 12151-1:1999
  • BS ISO 12151-3:2010 Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends
    Supersedes BS ISO 12151-3:1999
  • BS ISO 12315:2010 Aluminium oxide primarily used for production of aluminium. Method for calculating the Al2O3 content of smelter-grade alumina
  • BS ISO 12637-2:2008 Graphic technology. Vocabulary. Prepress terms
  • BS ISO 12643-1:2009 Graphic technology. Safety requirements for graphic technology equipment and systems. General requirements
    Supersedes BS ISO 12643-1:2007 which remains current
  • BS ISO 13041-2:2008 Test conditions for numerically controlled turning machines and turning centres. Geometric tests for machines with a vertical workholding spindle
  • BS ISO 13257:2010 Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
  • BS ISO 13260:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Test method for resistance to combined temperature cycling and external loading
  • BS ISO 13264:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics fittings. Test method for mechanical strength or flexibility of fabricated fittings
  • BS ISO 13268:2010 Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
  • BS ISO 13655:2009 Graphic technology. Spectral measurement and colorimetric computation for graphic arts images
    Supersedes BS ISO 13655:1996
  • BS ISO 16192:2010 Space systems. Experience gained in space projects (Lessons learned). Principles and guidelines
  • BS ISO 17853:2010 Wear of implant materials. Polymer and metal wear particles. Isolation and characterization
    Supersedes BS ISO 17853:2003
  • BS ISO 18192-2:2010 Implants for surgery. Wear of total intervertebral spinal disc prostheses. Nucleus replacements
  • BS ISO 18334:2010 Pallets for materials handling. Quality of assembly of new wooden pallets
    Supersedes BS ISO 18334:2003
  • BS ISO 18632:2010 Alloyed steel. Determination of manganese. Potentiometric and visual titration method
  • BS ISO 19012-2:2009 Optics and photonics. Designation of microscope objectives. Chromatic correction
  • BS ISO/IEC 20060:2010 Information technology. Open terminal architecture (OTA). Virtual machine
    Supersedes BS ISO/IEC 20060:2001
  • BS ISO 20806:2009 Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
    Supersedes BS ISO 20806:2004
  • BS ISO 21217:2010 Intelligent transport systems. Communications access for land mobiles (CALM). Architecture
  • BS ISO 21931-1:2010 Sustainability in building construction. Framework for methods of assessment of the environmental performance of construction works. Buildings
  • BS ISO 22413:2010 Transfer sets for pharmaceutical preparations. Requirements and test methods
    Supersedes BS ISO 22413:2007
  • BS ISO 22538-5:2010 Space systems. Oxygen safety. Operational and emergency procedures
  • BS ISO 24100:2010 Intelligent transport systems. Basic principles for personal data protection in probe vehicle information services
  • BS ISO 24610-1:2006 Language resource management. Feature structures. Feature structure representation
  • BS ISO 26462:2010 Milk. Determination of lactose content. Enzymatic method using difference in pH
  • BS IEC 60737:2010 Nuclear power plants. Instrumentation important to safety Temperature sensors (incore and primary coolant circuit). Characteristics and test methods
  • BS IEC 62463:2010 Radiation protection instrumentation. X-ray systems for the screening of persons for security and the carrying of illicit items
  • BS IEC 62465:2010 Nuclear power plants. Instrumentation and control important to safety. Management of ageing of electrical cabling systems
  • BS IEC 62523:2010 Radiation protection instrumentation. Cargo/vehicle radiographic inspection system
  • BS IEC 62533:2010 Radiation protection instrumentation. Highly sensitive hand-held instruments for photon detection of radioactive material
  • BS IEC 62534:2010 Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material

Published Documents

  • PD 25666:2010 Business continuity management. Guidance on exercising and testing for continuity and contingency programmes
  • PD CEN/TR 13097:2010 Characterization of sludges. Good practice for sludge utilisation in agriculture
    Supersedes PD CR 13097:2001
  • PD CEN/TR 15985:2010 Thermal insulating products. Factory made products of expanded polystyrene (EPS). Voluntary certification of the raw material
  • PD CEN/TR 15990:2010 Data sheets. Footwear tests materials and test adhesives
  • PD CEN/TR 16013-1:2010 Workplace exposure. Guide for the use of direct-reading instruments for aerosol monitoring. Choice of monitor for specific applications
  • PD CEN/TR 16040:2010 Electronic fee collection. Requirements for urban dedicated short-range communication
  • PD CISPR/TR 18-1:2010 Radio interference characteristics of overhead power lines and high-voltage equipment. Description of phenomena
    Supersedes BS 5049-1:1994
  • PD CISPR/TR 18-2:2010 Radio interference characteristics of overhead power lines and high-voltage equipment. Methods of measurement and procedure for determining limits
    Supersedes BS 5049-2:1994
  • PD CISPR/TR 18-3:2010 Radio interference characteristics of overhead power lines and high-voltage equipment. Code of practice for minimizing the generation of radio noise
    Supersedes BS 5049-3:1994
  • PD ISO/TR 230-8:2010 Test code for machine tools. Vibrations
    Supersedes PD ISO/TR 230-8:2009
  • PD ISO/TR 12859:2009 Intelligent transport systems. System architecture. Privacy aspects in ITS standards and systems
  • PD ISO/TR 15847:2008 Graphic technology. Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment
  • PD ISO/IEC TR 18047-7:2010 Information technology. Radio frequency identification device conformance test methods. Test methods for active air interface communications at 433 MHz
    Supersedes PD ISO/IEC TR 18047-7:2005
  • PD ISO/TR 25743:2010 Lifts (elevators). Study of the use of lifts for evacuation during an emergency
  • PD CLC/TR 50417:2010 Safety of household and similar electrical appliances. Interpretations related to European Standards in the EN 60335 series
    Supersedes PD CLC/TR 50417:2003
  • PD CLC/TR 50484:2009 Recommendations for shielded enclosures
  • PD IEC/TR 60887:2010 Glass bulb designation system for lamps
    Supersedes BS 7132:1989
  • PD IEC/TR 60919-1:2010 Performance of high-voltage direct current (HVDC) systems with line-commutated converters. Steady-state conditions
  • PD IEC/TR 61000-4-35:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. HPEM simulator compendium
  • PD IEC/TR 61916:2009 Electrical accessories. Harmonization of general rules
  • PD IEC/TR 62153-4-1:2010 Metallic communication cable test methods. Electromagnetic compatibility (EMC). Introduction to electromagnetic (EMC) screening measurements
  • PD IEC/TR 62283:2010 Optical fibres. Guidance for nuclear radiation tests
    Supersedes PD IEC TR 62283:2003
  • PD IEC/TR 62343-6-3:2010 Dynamic modules. Round robin measurement results for group delay ripple of tunable dispersion compensators

Publicly Available Specification

Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

  • PAS 900:2010 Code of Practice for Wheelchair Passports

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 8300:2009+A1:2010 Design of buildings and their approaches to meet the needs of disabled people. Code of practice
    AMENDMENT 1
  • BS EN 1034-1:2000+A1:2010 Safety of machinery. Safety requirements for the design and construction of paper-making and finishing machines. Common requirements
    AMENDMENT 1
  • BS EN 1678:1998+A1:2010 Food processing machinery. Vegetable cutting machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 1990:2002+A1:2005 Eurocode. Basis of structural design
    CORRIGENDUM 2
  • BS EN ISO 8536-2:2010 Infusion equipment for medical use. Closures for infusion bottles
    CORRIGENDUM 1
  • BS EN ISO 10993-1:October 2009 Biological evaluation of medical devices. Evaluation and testing within a risk management process
    CORRIGENDUM 1
  • BS EN ISO 10993-7:2008 Biological evaluation of medical devices. Ethylene oxide sterilization residuals
    CORRIGENDUM 1
  • BS EN ISO 10993-9:December 2009 Biological evaluation of medical devices. Framework for identification and quantification of potential degradation products
    CORRIGENDUM 1
  • BS EN 12267:2003+A1:2010 Food processing machinery. Circular saw machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 12268:2003+A1:2010 Food processing machinery. Band saw machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 12355:2003+A1:2010 Food processing machinery. Derinding-, skinning- and membrane removal machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN ISO 12402-6:2006+A1:2010 Personal flotation devices. Special purpose lifejackets and buoyancy aids. Safety requirements and additional test methods
    AMENDMENT 1
  • BS EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment. Safety requirements
    AMENDMENT 1
  • BS EN 12855:2003+A1:2010 Food processing machinery. Rotating bowl cutters. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 12921-1:2005+A1:2010 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours. Common safety requirements
    AMENDMENT 1
  • BS EN 13208:2003+A1:2010 Food processing machinery. Vegetable peelers. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 14351-1:2006+A1:2010 Windows and doors. Product standard, performance characteristics. Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
    AMENDMENT 1
  • BS EN 15651-2:2010 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for glazing
    CORRIGENDUM 1
  • BS EN 50085-2-3:2010 Cable trunking systems and cable ducting systems for electrical installations. Particular requirements for slotted cable trunking systems intended for installation in cabinets
    CORRIGENDUM 1
  • BS EN 50124-1:2001+A2:2005 Railway applications. Insulation coordination. Basic requirements. Clearances and creepage distances for all electrical and electronic equipment
    CORRIGENDUM 1
  • BS EN 50126-1:1999 Railway applications. The specification and demonstration of reliability, availability, maintainability and safety (RAMS). Basic requirements and generic process
    CORRIGENDUM 2
  • BS EN 50129:2003 Railway applications. Communication, signaling and processing systems. Safety related electronic systems for signaling
    CORRIGENDUM 1
  • BS EN 50149:2001 Railway applications. Fixed installations. Electric traction. Copper and copper alloy grooved contact wires
    CORRIGENDUM 4
  • BS EN 50155:2007 Railway applications. Electronic equipment used on rolling stock
    CORRIGENDUM 1
  • BS EN 50367:2006 Railway applications. Current collection systems. Technical criteria for the interaction between pantograph and overhead line (to achieve free access)
    CORRIGENDUM 1
  • BS EN 50428:2005+A2:2009 Switches for household and similar fixed electrical installations. Collateral standard. Switches and related accessories for use in home and building electronic systems (HBES)
    AMENDMENT 2
  • BS EN 60317-26:1996+A2:2010 Specifications for particular types of winding wires. Polyamide-imide enamelled round copper wire, class 200
    AMENDMENT 2
  • BS EN 60317-29:1996+A2:2010 Specifications for particular types of winding wires. Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200
    AMENDMENT 2
  • BS EN 60317-44:1997+A1:2010 Specifications for particular types of winding wires. Aromatic polyimide tape wrapped rectangular copper wire, class 240
    AMENDMENT 1
  • BS EN 60335-2-58:2005+A1:2008 Household and similar electrical appliances. Safety. Particular requirements for commercial electric dishwashing machines
    AMENDMENT 2
  • BS EN 60335-2-75:2004+A1:2005 Household and similar electrical appliances. Safety. Particular requirements for commercial dispensing appliances and vending machines
    AMENDMENT 3
  • BS EN 60598-2-22:1998+A2:2008 Luminaires. Particular requirements. Luminaires for emergency lighting
    CORRIGENDUM 4
  • BS EN 60601-1-2:2007 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Electromagnetic compatibility. Requirements and tests
    CORRIGENDUM 1
  • BS EN 60601-1-3:2008 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. Radiation protection in diagnostic X-ray equipment
    CORRIGENDUM 1
  • BS EN 60601-1-6:2007 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. Usability
    CORRIGENDUM 2
  • BS EN 60601-1-8:2007 Medical electrical equipment. General requirements for basic safety and essential performance. Collateral Standard. General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
    CORRIGENDUM 1
  • BS EN 60664-3:2003+A1:2010 Insulation coordination for equipment within low-voltage systems. Use of coating, potting or moulding for protection against pollution
    AMENDMENT 1
  • BS EN 60704-1:2010 Household and similar electrical appliances. Test code for the determination of airborne noise. General requirements
    CORRIGENDUM 1
  • BS EN 60745-2-11:2003+A1:2009 Hand-held motor-operated electric tools. Safety. Particular requirements for reciprocating saws (jig and sabre saws)
    AMENDMENT 3
  • BS EN 60745-2-14:2009+A2:2010 Hand-held motor-operated electric tools. Safety. Particular requirements for planers
    AMENDMENT 1
  • BS EN 60745-2-15:2009+A1:2010 Hand-held motor-operated electric tools. Safety. Particular requirements for hedge trimmers
    AMENDMENT 1
  • BS EN 61000-4-3:2006+A2:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radiofrequency, electromagnetic field immunity test
    AMENDMENT 2
  • BS EN 61076-2-101:2008 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for M12 connectors with screwlocking
    CORRIGENDUM 1
  • BS EN 61076-3-101:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Rectangular connectors. Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line
    CORRIGENDUM 1
  • BS EN 61547:2009 Equipment for general lighting purposes. EMC immunity requirements
    CORRIGENDUM 1
  • BS EN 61549:2003+A2:2010 Miscellaneous lamps
    AMENDMENT 2
  • BS EN 62115:2005 Electric toys. Safety
    CORRIGENDUM 1
  • PD ISO/TR 1281-2:2008 Rolling bearings. Explanatory notes on ISO 281. Modified rating life calculation, based on a systems approach to fatigue stresses
    CORRIGENDUM 1
  • BS ISO 4217:2008 Codes for the representation of currencies and funds
    CORRIGENDUM 1
  • BS ISO 6611:2004 Milk and milk products. Enumeration of colony forming units of yeasts and/or moulds. Colony count technique at 25°C
    CORRIGENDUM 1
  • BS ISO 7867-2:2005+A1:2010 Tyres and rims (metric series) for agricultural tractors and machines. Service description and load ratings
    AMENDMENT 1
  • BS ISO/IEC 9798-3:1998+A1:2010 Information technology. Security techniques. Entity authentication. Mechanisms using digital signature techniques
    AMENDMENT 1 and CORRIGENDUM 1
  • BS ISO/IEC 10373-2:2006 Identification cards. Test methods. Cards with magnetic stripes
    CORRIGENDUM 1
  • BS ISO 11795:1997+A1:2010 Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Method of measuring tyre rolling circumference for agricultural tractor drive wheels
    AMENDMENT 1
  • BS ISO 13399-1:2006+A1:2010 Cutting tool data representation and exchange. Overview, fundamental principles and general information model
    AMENDMENT 1
  • BS ISO/IEC 15909-1:2004+A1:2010 Systems and software engineering. High-level Petri nets. Concepts, definitions and graphical notation
    AMENDMENT 1
  • BS ISO/IEC 24744:2007+A1:2010 Software Engineering. Metamodel for Development Methodologies
    AMENDMENT 1
  • BS IEC 60747-1:2006+A1:2010 Semiconductor devices. General
    AMENDMENT 1

British Standard declared obsolescent

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

  • BS 999:1962 Schedule of tests for coke ovens
    This standard has been declared obsolescent as the technical committee that prepared this standard has been disbanded, so the standard cannot be maintained
  • BS 1846-2:1968 Glossary of terms relating to solid fuel burning equipment. Industrial water heating and steam raising installations
    This standard has been declared obsolescent as the technical committee that prepared this standard has been disbanded, so the standard cannot be maintained
  • BS 3455:1973 Glossary of terms used in nuclear science and technology
    This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use
  • BS 3664:1963 Specification for film badges for personnel radiation monitoring
    This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use
  • BS 3775:1964 Specification for counting trays (planchets) for radioactive assay
    This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use
  • BS 3890:1965 General recommendations for the testing, calibration and processing of radiation monitoring films
    This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use
  • BS 4247-1:1981 Surface materials for use in radioactive areas. Methods of measuring and evaluating the decontamination factor
    This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use
  • BS 4247-2:1982 Surface materials for use in radioactive areas. Guide to the selection of materials
    This standard has been declared obsolescent as the techniques are old but it is considered that there still is still a small level of use

British Standards withdrawn

  • BS 770-6:1984 Methods for chemical analysis of cheese. Determination of total phosphorus content. Molecular absorption spectrometric method
    Superseded by BS ISO 2962:2010
  • BS 1486-1:1959 Lubricating nipples. Lubricating nipples and adaptors for use on machinery and vehicles
    This standard has been withdrawn as the technical committee that prepared this standard has now been disbanded, therefore the standard cannot be maintained
  • BS 1486-2:1961 Lubricating nipples. Heavy duty lubricating nipples
    This standard has been withdrawn as the technical committee that prepared this standard has now been disbanded, therefore the standard cannot be maintained
  • BS 1486-4:1981 Lubricating nipples. Specification for hydraulic grease nipples
    This standard has been withdrawn as the technical committee that prepared this standard has now been disbanded, therefore the standard cannot be maintained
  • BS 1629:1989 Recommendation for references to published materials
    Superseded by BS ISO 690:2010
  • BS 1743-7.1:1982 Methods for analysis of dried milk and dried milk products. Determination of the titratable acidity of dried milk. Reference method
    Superseded by BS ISO 6091:2010
  • BS 1797:1987 Schedule for tables for use in the calibration of volumetric glassware
    Superseded by BS EN ISO 4787:2010
  • BS 2997:1958 Specification for aluminium rainwater goods
    Superseded by BS 8530:2010
  • BS 3680-3Q:2002 Measurement of liquid flow in open channels. Guidelines for safe working practice in river flow measurement
    This standard is withdrawn as it is no longer relevant and will not be revised
  • BS 3690-2:1989 Bitumens for building and civil engineering. Specification for bitumens for industrial purposes
    This standard has been withdrawn as it is believed there are very few users and it is no longer relevant
  • BS 4285-3.6:1986 Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of yeasts and moulds
    Superseded by BS ISO 6611:2004
  • BS 4445:1969 Schedule of tests for gasification and reforming plants using hydrocarbon feedstocks
    This standard has been withdrawn as the technical committee that prepared this standard has now been disbanded, therefore the standard cannot be maintained
  • BS 5049-1:1994 Radio interference characteristics of overhead power lines and high-voltage equipment. Description of phenomena
    Superseded by PD CISPR/TR 18-1:2010
  • BS 5049-2:1994 Radio interference characteristics of overhead power lines and high-voltage equipment. Methods of measurement and procedure for determining limits
    Superseded by PD CISPR/TR 18-2:2010
  • BS 5049-3:1994 Radio interference characteristics of overhead power lines and high-voltage equipment. Code of practice for minimizing the generation of radio noise
    Superseded by PD CISPR/TR 18-3:2010
  • BS 5751:1987 Specification for dimensions of housings for hydraulic seals for reciprocating applications
    Superseded by BS ISO 5597:2010
  • BS 6248-4:1982 Caseins and caseinates. Method for determination of pH (reference method)
    Superseded by BS ISO 5546:2010
  • BS 6310:1982 Specification for occluded-ear simulator for the measurement of earphones coupled to the ear by ear inserts
    Superseded by BS EN 60318-4:2010
  • BS 6389:1983 Methods for determination of operator's field of vision for agricultural tractors
    Superseded by BS ISO 5721:19896
  • BS 6394-2:1985 Trace elements in milk and milk products. Method for the determination of iron content (reference method)
    Superseded by BS ISO 6732:2010
  • BS 6696:1986 Methods for use and testing of capacity of volumetric glassware
    Superseded by BS EN ISO 4787:2010
  • BS 6912-3:1990 Safety of earth-moving machinery. Sound test method for machine-mounted forward and reverse warning alarm
    Superseded by BS ISO 9533:2010
  • BS 7132:1989 Nomenclature for glass bulb designation system for lamps
    Superseded by PD IEC/TR 60887:2010
  • BS 7448-2:1997 Fracture mechanics toughness tests. Method for determination of KIc, critical CTOD and critical J values of welds in metallic materials
    Superseded by BS EN ISO 15653:2010
  • DD 264:2007 Packaging. Braille and other formats for medicinal products
    Superseded by BS EN 15823:2010
  • DD CEN/TS 14425-3:2003 Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics. Chevron notched beam (CNB) method
    Superseded by BS EN 14425-3:2010
  • BS EN 3-6:1996 Portable fire extinguishers. Provisions for the attestation of conformity of portable fire extinguishers in accordance with EN 3 Part 1 to Part 5
    Superseded by BS EN 3-10:2009
  • BS EN 12373-1:2001 Aluminium and aluminium alloys. Anodizing. Method for specifying decorative and protective anodic oxidation coatings on aluminium
    Superseded by BS EN ISO 7599:2010
  • BS EN 12373-6:1999 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatment
    Superseded by BS EN ISO 3210:2010
  • BS EN 12373-7:2002 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
    Superseded by BS EN ISO 3210:2010
  • BS EN 13152:2002 Specification and testing of LPG cylinder valves. Self closing
    Superseded by BS EN ISO 14245:2010
  • BS EN 13153:2002 Specification and testing of LPG cylinder valves. Manually operated
    Superseded by BS EN ISO 15995:2010
  • BS EN 20286-2:1993 ISO system of limits and fits. ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
    Superseded by BS EN ISO 286-2:2010
  • BS EN 50242:1999 Electric dishwashers for household use. Test methods for measuring the performance
    Superseded by the dual numbered standard BS EN 50242:2008, BS EN 60436:2008
  • BS EN 55012:2002 Vehicles, boats and internal combustion engine driven devices. Radio disturbance characteristics. Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
    Superseded by BS EN 55012:2007+A1:2009
  • BS EN 60730-2-3:1992 Automatic electrical controls for household and similar use. Particular requirements for thermal protectors for ballasts for tubular fluorescent lamps
    Superseded by BS EN 60730-2-3:2007
  • BS EN 60730-2-4:1993 Specification for automatic electrical controls for household and similar use. Particular requirements. Thermal motor protectors for motor-compressors of hermetic and semihermetic type
    Superseded by BS EN 60730-2-4:2007
  • BS EN 60730-2-10:1995 Specification for automatic electrical controls for household and similar use. Particular requirements. Motor starting relays
    Superseded by BS EN 60730-2-10:2007
  • BS ISO 690-2:1997 Information and documentation. Bibliographic references. Electronic documents or parts thereof
    Superseded by BS ISO 690:2010
  • BS ISO 5631:2000 Paper and board. Determination of colour (C/2°). Diffuse reflectance method
    Superseded by BS ISO 5631-1:2009
  • BS ISO/IEC 14763-3:2006+A1:2009 Information technology. Implementation and operation of customer premises cabling. Testing of optical fibre cabling
    This standard is withdrawn with immediate effect as the content is largely covered by BS EN 61280-4-1.
  • BS IEC 61713:2000 Software dependabilty through the software life-cycle processes. Application guide
    Superseded by BS EN 60300-3-15:2009
  • DD IEC/PAS 61076-2-107:2007 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw-locking
    Superseded by BS EN 61076-2-107:2010
  • DD IEC/PAS 62591:2009 Industrial communication networks. Fieldbus specifications. WirelessHART communication network and communication profile
    Superseded by BS EN 62591:2010
  • BS QC 390000:1992 Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Generic specification
    This standard has been withdrawn as it is the UK implementation of IEC 61045-1:1991. It is withdrawn in line with the replacement of IEC 61045-1:1991 by IEC 60115-1:2008, which at this time has not been adopted by CENELEC or implemented in the UK
  • BS QC 390100:1992 Harmonized system of quality assessment for electronic components. Fixed film resistor networks for use in electronic equipment. Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure
    This standard has been withdrawn as it is the UK implementation of IEC 61045-2:1991. It is withdrawn in line with the replacement of IEC 61045-2:1991 by IEC 60115-1:2008, which at this time has not been adopted by CENELEC or implemented in the UK
  • BS QC 390101:1992 Fixed film resistor networks for use in electronic equipment. Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure. Assessment level E
    This standard has been withdrawn as it is the UK implementation of IEC 61045-2-1:1991. It is withdrawn in line with the replacement of IEC 61045-2-1:1991 by IEC 60115-1:2008, which at this time has not been adopted by CENELEC or implemented

Published in international.