ASTM Standards

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
    Revised to A370-10
  • C587 Standard Specification for Gypsum Veneer Plaster
    Reapproved, available as C587-04(2009)
  • C717 Standard Terminology of Building Seals and Sealants
    Revised to C717-10
  • C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
    Reapproved, available as C719-93(2010)
  • C1022 Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate
    Editorially changed, available as C1022-05(1022)e1
  • C1030 Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry
    Revised to C1030-10
  • C1536 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
    Revised to C1536-10
  • C1737-10 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
  • D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
    Revised to D86-10
  • D859 Standard Test Method for Silica in Water
    Revised to D859-10
  • D994 Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
    Reapproved, available as D994-98(2010)
  • D1179 Standard Test Methods for Fluoride Ion in Water
    Revised to D1179-10
  • D1246 Standard Test Method for Bromide Ion in Water
    Revised to D1246-10
  • D1511 Standard Test Method for Carbon Black – Pellet Size Distribution
    Revised to D1511-10
  • D1535 Standard Practice for Specifying Color by the Munsell System
    Editorially changed, available as D1535-08e1
  • D1937 Standard Test Method for Carbon Black, Pelleted – Mass Strength
    Revised to D1937-10
  • D2104 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010)
    Withdrawn with no replacement. D2104-03
  • D2447 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)
    Withdrawn with no replacement. D2447-03
  • D2597 Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography
    Revised to D2597-10
  • D2862 Standard Test Method for Particle Size Distribution of Granular Activated Carbon
    Revised to D2862-10
  • D3181 Standard Guide for Conducting Wear Tests on Textiles
    Revised to D3181-10
  • D3307 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
    Revised to D3307-10
  • D3444 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
    Reapproved (with editorial change), available as D3444-00(2010)e1
  • D3511/D3511M Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Brush Pilling Tester
    Revised (with designation change) to D3511/D3511M-10
  • D3512/D3512M Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
    Revised (with designation change) to D3512/D3512M-10
  • D3763 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
    Revised to D3763-10
  • D3801 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
    Revised to D3801-10
  • D3862-80(2001) Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality (Withdrawn 2010)
    Withdrawn with no replacement.
  • D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease
    Revised to D4048-10
  • D4051 Standard Practice for Preparation of Low-Pressure Gas Blends
    Revised to D4051-10
  • D4145 Standard Test Method for Coating Flexibility of Prepainted Sheet
    Revised to D4145-10
  • D4151 Standard Test Method for Flammability of Blankets
    Reinstated as D4151-10
  • D4239 Standard Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion Methods
    Editorially changed, available as D4239-10e1
  • D4485 Standard Specification for Performance of Engine Oils
    Revised to D4485-10a
  • D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
    Editorially changed, available as D4541-09e1
  • D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
    Revised to D4802-10
  • D5191 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)
    Revised to D5191-10
  • D5230 Standard Test Method for Carbon Black – Automated Individual Pellet Hardness
    Revised to D5230-10
  • D5291 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
    Revised to D5291-10
  • D5293 Standard Test Method for Apparent Viscosity of Engine Oils Between -5 and -35°C Using the Cold-Cranking Simulator
    Revised to D5293-10
  • D5420 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
    Revised to D5420-10
  • D5628 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
    Revised to D5628-10
  • D5704 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
    Revised to D5704-10
  • D5769 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
    Revised to D5769-10
  • D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    Revised to D5771-10
  • D5772 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
    Revised to D5772-10
  • D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    Revised to D5773-10
  • D5900 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
    Revised to D5900-10a
  • D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
    Revised to D5966-10
  • D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
    Revised to D5967-10
  • D6068 Standard Test Method for Determining J-R Curves of Plastic Materials
    Revised to D6068-10
  • D6080 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
    Revised to D6080-10
  • D6127 Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)
    Revised to D6127-10
  • D6158 Standard Specification for Mineral Hydraulic Oils
    Revised to D6158-10
  • D6361/D6361M Standard Guide for Selecting Cleaning Agents and Processes
    Revised (with designation change) to D6361/D6361M-98(2010)e1
  • D6427/D6427M Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF3CH2CF3)
    Revised (with designation change) to D6427/D6427M-10
  • D6497 Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
    Reapproved, available as D6497-02(2010)
  • D6563 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography
    Reapproved (with editorial change), available as D6563-05(2010)e1
  • D6588/D6588M Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test)
    Revised to D6588/D6588M-10a
  • D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure
    Revised to D6681-10
  • D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
    Revised to D6709-10
  • D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine – 1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)
    Revised to D6750-10
  • D6754/D6754M Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
    Revised (with designation change) to D6754/D6754M-10
  • D6779 Standard Classification System for Polyamide Molding and Extrusion Materials (PA)
    Revised to D6779-10
  • D6802 Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry
    Reapproved, available as D6802-02(2010)
  • D6837 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine
    Revised to D6837-10
  • D6855 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
    Revised to D6855-10
  • D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine – Caterpillar 1R Test Procedure
    Revised to D6923-10
  • D7076 Standard Test Method for Measurement of Shives in Retted Flax
    Revised to D7076-10
  • D7397 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
    Revised to D7397-10
  • D7594-10 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
  • D7619-10 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
  • D7621-10 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
  • D7622-10 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
  • D7623-10 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
  • D7644-10 Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7645-10 Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
  • D7646-10 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
  • D7650-10 Standard Test Method for Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter
  • D7651-10 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel
  • E161 Standard Specification for Precision Electroformed Sieves
    Reapproved, available as E161-00(2010)
  • E170 Standard Terminology Relating to Radiation Measurements and Dosimetry
    Revised to E170-10
  • E927 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing
    Revised to E927-10
  • E973 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
    Revised to E973-10
  • E1040 Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
    Revised to E1040-10
  • E1115 Standard Test Method for Evaluation of Surgical Hand Scrub Formulations
    Revised to E1115-10
  • E1125 Standard Test Method for Calibration of Primary Non-Concentrator Terrestrial Photovoltaic Reference Cells Using a Tabular Spectrum
    Revised to E1125-10
  • E1362 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
    Revised to E1362-10
  • E1597 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
    Revised to E1597-10
  • E1823 Standard Terminology Relating to Fatigue and Fracture Testing
    Revised to E1823-10a
  • E2005 Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
    Revised to E2005-10
  • E2047 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
    Revised to E2047-10
  • E2236 Standard Test Methods for Measurement of Electrical Performance and Spectral Response of Nonconcentrator Multijunction Photovoltaic Cells and Modules
    Revised to E2236-10
  • E2307 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus
    Revised to E2307-10
  • E2541 Standard Guide for Stakeholder-Focused, Consensus-Based Disaster Restoration Process for Contaminated Assets
    Revised to E2541-10
  • E2752-10 Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products
  • F656 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
    Revised to F656-10
  • F893 Standard Guide for Inspection of Amusement Rides and Devices
    Revised (with title change) to F893-10
  • F1702 Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
    Revised (with title change) to F1702-10
  • F1936 Standard Specification for Impact Attenuation of Turf Playing Systems as Measured in the Field
    Revised (with title change) to F1936-10
  • F2117 Standard Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
    Reinstated as F2117-10
  • F2271 Standard Specification for Paintball Marker Barrel Blocking Devices
    Revised to F2271-10
  • F2278 Standard Test Method for Evaluating Paintball Barrier Netting
    Revised to F2278-10a
  • F2849-10 Standard Practice for Handling of Unmanned Aircraft Systems at Divert Airfields
  • F2853-10 Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams

Published in international.