ASTM STANDARDS

To purchase PDF or hard copy ASTM Standards, please email enquiries@standards.co.nz or call 0800 782 632 during business hours.

  • A247 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings
    Revised to A247-10
  • A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
    Editorially changed, available as A325-09ae1
  • A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy
    Editorially changed, available as A494/A494M-09e1
  • A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
    Reapproved, available as A668/A668M-04(2009)
  • A682/A682M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For
    Withdrawn and replaced by A684/A684M
  • A967 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
    Editorially changed, available as A967-05e2
  • A1003/A1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
    Revised to A1003/A1003M-10
  • A1055/A1055M Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
    Editorially changed, available as A1055/A1055M-08ae1
  • B243 Standard Terminology of Powder Metallurgy
    Revised to B243-10
  • B813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
    Revised to B813-10
  • C220 Standard Specification for Flat Asbestos-Cement Sheets
    Reapproved, available as C220-91(2009)
  • C296/C296M Standard Specification for Asbestos-Cement Pressure Pipe
    A change in designation. The new designation is C296/C296M-00(2009)e1
  • C465 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
    Revised to C465-10
  • C494/C494M Standard Specification for Chemical Admixtures for Concrete
    Revised to C494/C494M-10
  • C508/C508M Standard Specification for Asbestos-Cement Underdrain Pipe
    A change in designation. The new designation is C508/C508M-00(2009)e1
  • C522 Standard Test Method for Airflow Resistance of Acoustical Materials
    Editorially changed, available as C522-03(2009)e1
  • C600 Standard Test Method of Thermal Shock Test on Glass Pipe
    Reapproved, available as C600-85(2010)
  • C601 Standard Test Method for Pressure Test on Glass Pipe
    Reapproved, available as C601-85(2010)
  • C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
    Editorially changed, available as C610-09e1
  • C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
    Revised to C685/C685M-10
  • C724 Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
    Reapproved, available as C724-91(2010)
  • C728 Standard Specification for Perlite Thermal Insulation Board
    Reapproved, available as C728-05(2010)
  • C752 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy
    Reapproved, available as C752-03(2010)
  • C786/C786M Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-?m (No. 50), 150-?m (No. 100), and 75-?m (No. 200) Sieves by Wet Methods
    Revised (with designation change) toC786/C786M-10
  • C859 Standard Terminology Relating to Nuclear Materials
    Revised to C859-10
  • C1053 Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
    Reapproved, available as C1053-00(2010)
  • C1119/C1119M Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
    A change in designation. The new designation is C1119/C1119M-90(2009)e1
  • C1121/C1121M Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
    A change in designation. The new designation is C1121/C1121M-04(2009)e1
  • C1123/C1123M Standard Test Method for Compressibility and Recovery of Asbestos
    A change in designation. The new designation is C1123/C1123M-90(2009)e1
  • C1124/C1124M Standard Test Method for Kerosene Retention of Asbestos
    A change in designation. The new designation is C1124/C1124M-90(2009)e1
  • C1125 Standard Test Method for Penetration Index of Asbestos
    Reapproved, available as C1125-89(2009)
  • C1162/C1162M Standard Test Method for Loose Density of Asbestos
    A change in designation. The new designation is C1162/C1162M-90(2009)e1
  • C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
    Revised to C1202-10
  • C1221 Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry
    Revised to C1221-10
  • C1231/C1231M Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
    Revised to C1231/C1231M-10
  • C1263 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
    Editorially changed, available as C1263-95(2005)e1
  • C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
    Editorially changed, available as C1289-08e1
  • C1311 Standard Specification for Solvent Release Sealants
    Revised to C1311-10
  • C1313/C1313M Standard Specification for Sheet Radiant Barriers for Building Construction Applications
    Revised (with designation change) to C1313/C1313M-10
  • C1320 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
    Editorially changed, available as C1320-05(2009)e1
  • C1334 Standard Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide
    Reapproved, available as C1334-05(2010)
  • C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
    Editorially changed, available as C1410-05ae1
  • C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete
    Revised to C143/C143M-10
  • C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
    Revised to C1433-10
  • C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
    Revised to C1433M-10
  • C1443 Standard Specification for Glasses, Portlight, Circular, Fully Tempered
    Reapproved, available as C1443-99(2010)
  • C1459 Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
    Reapproved, available as C1459-04(2009)
  • C1507 Standard Test Method for Radiochemical Determination of Strontium-90 in Soil
    Editorially changed, available as C1507-07e1
  • C1523 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
    Revised to C1523-10
  • C1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
    Revised to C1577-10
  • C162 Standard Terminology of Glass and Glass Products
    Reapproved, available as C162-05(2010)
  • C1639 Standard Specification for Fabrication of Cellular Glass Pipe and Tubing Insulation
    Revised to C1639-10
  • C1668 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
    Revised to C1668-10
  • C1683 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
    Editorially changed, available as C1683-08e1
  • C1697-10 Standard Specification for Blended Supplementary Cementitious Materials
    New standard, now available.
  • C1726/C1726M-10 Standard Guide for Use of Modeling for Passive Gamma Measurements
    New standard, now available.
  • C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
    Revised to C173/C173M-10
  • D9 Standard Terminology Relating to Wood and Wood-Based Products
    Editorially changed, available as D9-09ae1
  • D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications
    Revised to D16-10
  • D61 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
    Reapproved, available as D61-75(2010)
  • D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
    Revised to D93-10
  • D315/D315M Standard Specification for Woven Asbestos Tape
    A change in designation. The new designation is D315/D315M-95(2009)e1
  • D572 Standard Test Method for Rubber-Deterioration by Heat and Oxygen
    Reapproved, available as D572-04(2009)
  • D613 Standard Test Method for Cetane Number of Diesel Fuel Oil
    Revised to D613-10
  • D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
    Revised to D854-10
  • D975 Standard Specification for Diesel Fuel Oils
    Revised to D975-10
  • D1061/D1061M Standard Specification for Asbestos Lap
    A change in designation. The new designation is D1061/D1061M-95(2009)e1
  • D1118/D1118M Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
    A change in designation. The new designation is D1118/D1118M-95(2009)e1
  • D1129 Standard Terminology Relating to Water
    Revised to D1129-10
  • D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
    Revised to D1238-10
  • D1417 Standard Test Methods for Rubber Latices-Synthetic
    Revised to D1417-10
  • D1492 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
    Editorially changed, available as D1492-08e1
  • D1508 Standard Test Method for Carbon Black, Pelleted Fines and Attrition
    Editorially changed, available as D1508-02(2007)e1
  • D1513 Standard Test Method for Carbon Black, Pelleted—Pour Density
    Editorially changed, available as D1513-05e1
  • D1571/D1571M Standard Specification for Woven Asbestos Cloth
    A change in designation. The new designation is D1571/D1571M-95(2009)e1
  • D1573/D1573M Standard Test Method for Heat Aging of Asbestos Textiles
    A change in designation. The new designation is D1573/D1573M-95(2009)e1
  • D1918/D1918M Standard Test Method for Asbestos Content of Asbestos Textiles
    A change in designation. The new designation is D1918/D1918M-95(2009)e1
  • D1945 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
    Reapproved, available as D1945-03(2010)
  • D2100/D21000M Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes
    A change in designation. The new designation is D2100/D21000M-95(2009)e1
  • D2171 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
    Editorially changed, available as D2171-07e1
  • D2187 Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins
    Editorially changed, available as D2187-94(2009)e1
  • D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    Revised to D2622-10
  • D2855 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
    Reapproved, available as D2855-96(2010)
  • D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique
    Revised to D2885-10
  • D2898 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
    Revised to D2898-10
  • D2949 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
    Editorially changed, available as D2949-01a(2008)e1
  • D2978 Standard Test Method for Volume of Processed Peat Materials
    Reapproved, available as D2978-03(2010)
  • D2980 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
    Reapproved, available as D2980-04(2010)
  • D299/D299M Standard Specification for Asbestos Yarns
    A change in designation. The new designation is D299/D299M-04(2009)e1
  • D3309 Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010)
    Withdrawn with no replacement. D3309-96a(2002)
  • D3393 Standard Specification for Coated Fabrics-Waterproofness
    Reapproved, available as D3393-91(2009)
  • D3740 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
    Revised to D3740-10
  • D375/D375M Standard Specification for Asbestos Roving
    A change in designation. The new designation is D375/D375M-95(2009)e1
  • D3880/D3880M Standard Test Method for Asbestos Strength Units
    A change in designation. The new designation is D3880/D3880M-90(2009)e1
  • D3929 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
    Reapproved (with editorial change), available asD3929-03(2010)e1
  • D3997/D3997M Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light
    A change in designation. The new designation is D3997/D3997M-97(2009)
  • D4005 Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings
    Reapproved, available as D4005-92(2009)
  • D4040 Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
    Revised to D4040-10
  • D4054 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives
    Revised to D4054-09
  • D4122 Standard Practice for Carbon Black-Evaluation of an Industry Reference Black
    Revised to D4122-10a
  • D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    Revised to D4294-10
  • D4308 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    Reapproved, available as D4308-95(2010)
  • D4410 Terminology for Fluvial Sediment
    Revised to D4410-10
  • D4445 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
    Revised to D4445-10
  • D4467-94(2001) Standard Practice for Interlaboratory Testing of a Textile Test Method That Produces Non-Normally Distributed Data (Withdrawn 2010)
  • D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
    Revised to D4555-10
  • D4678 Standard Practice for Rubber-Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
    Reapproved, available as D4678-04(2009)
  • D4752 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
    Revised (with title change) to D4752-10
  • D4840 Standard Guide for Sampling Chain-of-Custody Procedures
    Reapproved, available as D4840-99(2010)
  • D5172 Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
    Reapproved (with editorial change), available as D5172-91(2010)e1
  • D5583 Standard Test Method for Detection and Estimation of Retention of Wood Preservatives by Aspergillus Bioassaying (Withdrawn 2010)
    Withdrawn with no replacement. D5583-06
  • D6161 Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes
    Revised to D6161-10
  • D628/D628M Standard Specification for Asbestos Tubular Sleeving
    A change in designation. The new designation is D628/D628M-95(2009)e1
  • D6515 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
    Reapproved, available as D6515-00(2009)
  • D6900 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
    Revised to D6900-10
  • D7013 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup
    Editorially changed, available as D7013-04e1
  • D7099 Standard Terminology Relating to Frozen Soil and Rock
    Reapproved, available as D7099-04(2010)
  • D7103 Standard Guide for Assessment of Medical Gloves
    Editorially changed, available as D7103-06e1
  • D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
    Editorially changed, available as D7504-09e1
  • D7511 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
    Editorially changed, available as D7511-09e1
  • D7511 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
    Editorially changed, available as D7511-09e2
  • D7556-10 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
    New standard, now available.
  • D7575 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
    Editorially changed, available as D7575-10e1
  • D7578-10 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
    New standard, now available.
  • E118 Standard Test Methods for Chemical Analysis of Copper-Chromium Alloys (Withdrawn 2010)
    Withdrawn with no replacement. E118-89(2004)
  • E121 Standard Test Methods for Chemical Analysis of Copper-Tellurium Alloys (Withdrawn 2010)
    Withdrawn with no replacement. E121-83(2004)
  • E127 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks
    Revised to E127-10
  • E222 Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
    Revised to E222-10
  • E359 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
    Revised to E359-10
  • E475 Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
    Revised to E475-10
  • E507 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry
    Revised (with title change) to E507-09
  • E671 Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
    Reapproved, available as E671-98(2010)
  • E677 Standard Specification for Interchangeable Spherical Ground Joints
    Reapproved, available as E677-94(2010)
  • E1208 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process
    Revised (with title change) to E1208-10
  • E1209 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
    Revised (with title change) to E1209-10
  • E1210 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process
    Revised (with title change) to E1210-10
  • E1219 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process
    Revised (with title change) to E1219-10
  • E1220 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process
    Revised (with title change) to E1220-10
  • E1225 Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
    Revised to E1225-09
  • E1290 Standard Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
    Editorially changed, available as E1290-08e1
  • E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    Revised to E1354-10
  • E1418 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
    Revised (with title change) to E1418-10
  • E1474 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
    Revised to E1474-10
  • E1636 Standard Practice for Analytically Describing Depth-Profile and Linescan-Profile Data by an Extended Logistic Function
    Revised (with title change) to E1636-10
  • E1642 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
    Reapproved, available as E1642-00(2010)
  • E1790 Standard Practice for Near Infrared Qualitative Analysis
    Reapproved, available as E1790-04(2010)
  • E185 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
    Revised to E185-10
  • E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range
    Editorially changed, available as E1921-09ce2
  • E2062 Standard Guide for PDD Examination Standards of Practice
    Revised to E2062-10
  • E2072 Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
    Revised to E2072-10
  • E2073 Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
    Revised to E2073-10
  • E2215 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels
    Revised to E2215-10
  • E2262 Standard Practice for Estimating Thurstonian Discriminal Distances
    Reapproved, available as E2262-03(2009)
  • E2534-10 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts
    New standard, now available.
  • E2556/E2556M-09 Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
    New standard, now available.
  • E2558 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
    Revised to E2558-09
  • E2589 Standard Terminology Relating to Nonsieving Methods of Powder Characterization
    Revised to E2589-09a
  • E2660-10 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications
    New standard, now available.
  • E2669-10 Standard Digital Reference Images for Titanium Castings
    New standard, now available.
  • E2672-09 Standard Practice for Identification and Categorization of Tooling
    New standard, now available.
  • E2692-10 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products
    New standard, now available.
  • E2708-10 Standard Terminology for Personnel Credentialing
    New standard, now available.
  • E2738-10 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
    New standard, now available.
  • E2740-10 Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
    New standard, now available.
  • F36 Standard Test Method for Compressibility and Recovery of Gasket Materials
    Reapproved, available as F36-99(2009)
  • F104 Standard Classification System for Nonmetallic Gasket Materials
    Reapproved, available as F104-03(2009)
  • F145 Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
    Reapproved, available as F145-72(2009)
  • F147 Standard Test Method for Flexibility of Non-Metallic Gasket Materials
    Reapproved, available as F147-87(2009)
  • F377 Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
    Reapproved, available as F377-03(2009)
  • F434 Standard Test Method for Blow-Out Testing of Preformed Gaskets
    Reapproved, available as F434-93(2009)
  • F480 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
    Editorially changed, available as F480-06be1
  • F659-10 Standard Specification for Ski and Snowboard Goggles
    Revised (with title change)
  • F794 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
    Reapproved, available as F794-03(2009)
  • F806 Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
    Reapproved, available as F806-99a(2009)
  • F822 Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
    Reapproved, available as F822-93(2010)
  • F823 Standard Specification for Desk, Log, Marine, Steel, with Cabinet
    Reapproved, available as F823-93(2010)
  • F824 Standard Specification for Tables, Mess, Marine, Steel
    Reapproved, available as F824-93(2010)
  • F825 Standard Specification for Drawers, Furniture, Marine, Steel
    Reapproved, available as F825-93(2010)
  • F826 Standard Specification for Tops, Furniture, Marine, Steel Reapproved, available as F826-94(2010)
  • F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
    Revised to F876-10
  • F899 Standard Specification for Wrought Stainless Steels for Surgical Instruments
    Editorially changed, available as F899-09e1
  • F919 Standard Specification for Slicing Machines, Food, Electric
    Revised to F919-10
  • F998 Standard Specification for Centrifugal Pump, Shipboard Use
    Revised to F998-10
  • F1076 Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
    Reapproved, available as F1076-87(2010)
  • F1098 Standard Specification for Envelope Dimensions for Butterfly Valves-NPS 2 to 24
    Reapproved, available as F1098-87(2010)
  • F1121 Standard Specification for International Shore Connections for Marine Fire Applications
    Reapproved, available as F1121-87(2010)
  • F1122 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
    Reapproved, available as F1122-04(2010)
  • F1123 Standard Specification for Non-Metallic Expansion Joints
    Reapproved, available as F1123-87(2010)
  • F1139 Standard Specification for Steam Traps and Drains
    Reapproved, available as F1139-88(2010)
  • F1172 Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
    Reapproved, available as F1172-88(2010)
  • F1199 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
    Reapproved, available as F1199-88(2010)
  • F1200 Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)
    Reapproved, available as F1200-88(2010)
  • F1276 Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
    Reapproved, available as F1276-99(2009)
  • F1277 Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique
    Reapproved, available as F1277-02(2009)
  • F1437 Standard Practice for Inclined Cargo Tank Ladders (Withdraw 2010)
    Withdrawn with no replacement. F1437-06
  • F1536 Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
    Reapproved, available as F1536-95(2010)
  • F1574 Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
    Reapproved, available as F1574-03a(2009)
  • F1615 Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
    Reapproved, available as F1615-95(2009)
  • F1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    Revised (with title change) to F1807-10
  • F1816 Standard Safety Specification for Drawstrings on Children's Upper Outerwear
    Reapproved, available as F1816-97(2009)
  • F1938 Guide for Safer Use of Movable Soccer Goals
    Reapproved, available as F1938-98(2009)
  • F1962 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
    Editorially changed, available as F1962-05e1
  • F1967 Standard Consumer Safety Specification for Infant Bath Seats
    Revised to F1967-10
  • F2006 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
    Revised to F2006-10
  • F2090 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
    Revised to F2090-10
  • F2155 Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
    Reapproved, available as F2155-01(2009)
  • F2159 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    Revised (with title change) to F2159-10
  • F2160 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
    Revised to F2160-10
  • F2325 Standard Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications
    Reapproved, available as F2325-03(2009)
  • F2450 Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products
    Revised to F2450-10
  • F2620 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
    Editorially changed, available as F2620-09e1
  • F2670 Standard Consumer Safety Specification for Infant Bath Tubs
    Revised to F2670-10
  • F2720/F2720M Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
    Revised to F2720/F2720M-09
  • F2731-10 Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems
    New standard, now available.
  • F2818-10 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
    New standard, now available.
  • F2822-10 Standard Specification for Fixed Anchorages Installed on Structures used for Rope Rescue Training
    New standard, now available.

Published in international.