BRITISH STANDARDS

The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 559:2009 Specification for the design and construction of signs for publicity, decorative and general purposes
    Supersedes BS 559:1998
  • BS 951:2009 Electrical earthing. Clamps for earthing and bonding. Specification
    Supersedes BS 951:1999
  • BS 3165:2009 Rubber suction hose and hose assemblies with semi-embedded wire helix for fire-fighting purposes. Requirements and test methods
    Supersedes BS 3165:1986
  • BS 6173:2009 Specification for installation and maintenance of gas-fired catering appliances for use in all types of catering establishments (2nd and 3rd family gases)
    Supersedes BS 6173:2001
  • BS 7121-13:2009 Code of practice for safe use of cranes. Hydraulic gantry lifting systems
  • BS 7371 Coatings on metal fasteners
    • BS 7371-1:2009 Specification for general requirements and selection guidelines
      Supersedes BS 7371-1:1991
    • BS 7371-3:2009 Specifications for electroplated zinc coatings
      Supersedes BS 7371-3:1993
  • BS 8406:2009 Event stewarding and crowd safety. Code of practice
    Supersedes BS 8406:2003

BS EN publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European standard.

  • BS EN 299:2009 Oil pressure atomizing nozzles. Determination of the angle and spray characteristics
    Supersedes BS EN 299:1999
  • BS EN 455-4:2009 Medical gloves for single use .Requirements and testing for shelf life determination
  • BS EN 623-5:2009 Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of phase volume fraction by evaluation of micrographs
    Supersedes DD ENV 623-5:2002
  • BS EN 933-10:2009 Tests for geometrical properties of aggregates. Assessment of fines. Grading of filler aggregates (air jet sieving)
    Supersedes BS EN 933-10:2001
  • BS EN 1006:2009 Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties
    Supersedes DD ENV 1006:2003
  • BS EN 1071 Advanced technical ceramics. Methods of test for ceramic coatings
    • BS EN 1071-9:2009 Determination of fracture strain
    • BS EN 1071-10:2009 Determination of coating thickness by cross sectioning
      Supersedes DD CEN/TS 1071-10:2004
  • BS EN 1097-8:2009 Tests for mechanical and physical properties of aggregates. Determination of the polished stone value
    Supersedes BS EN 1097-8:2000
  • BS EN 1332-1:2009 Identification card systems. Human-machine interface. Design principles for the user interface
    Supersedes BS EN 1332-1:1999
  • BS EN ISO 1456:2009 Metallic and other inorganic coatings. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
    Supersedes BS EN 12540:2000
  • BS EN 2116:2009 Aerospace series. Aluminium alloy 2017A-T42. Wire for solid rivets. D ? 10 mm
  • BS EN 2117:2009 Aerospace series. Aluminium alloy AL-P5056A (5056A)-H32. Wire for solid rivets. D ? 10 mm
  • BS EN 2206:2008 Aerospace series. Steel FE-PL1502 (25CrMo4). 650 MPa ? Rm ? 850 MPa. Bars. De ? 150 mm
  • BS EN 2438:2008 Aerospace series. Steel FE-PL2102 (35NiCr6). 900 MPa ? Rm ? 1100 MPa. Bars. De ? 40 mm
  • BS EN 2446:2008 Aerospace series. Steel FE-PL1503 (35CrMo4). 1100 MPa ? Rm ? 1300 MPa. Bars. De ? 25 mm
  • BS EN 2448:2008 Aerospace series. Steel FE-PL1503 (35CrMo4). 900 MPa ? ?Rm ? 1100 MPa. Bars. De ? 40 mm
  • BS EN 2606:2009 Aerospace series. 60º interface for adaptors, threaded, with lockring. Geometric configuration
  • BS EN 2755:2009 Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner. Elevated load at ambient temperature. Technical specification
  • BS EN 3052:2009 Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature)/425ºC
    Supersedes BS EN 3052:1994
  • BS EN 3115:2009 Aerospace series. Aluminium alloy 7050-T73. Wire for solid rivets. D ? 10mm
  • BS EN ISO 3382-1:2009 Acoustics. Measurement of room acoustic parameters. Performance spaces
    Partially supersedes BS EN ISO 3382:2000
  • BS EN 3389:2009 Aerospace series. Fasteners, externally threaded, in heat resisting nickel base alloy NI-PH1302 (Waspaloy). Classification: 1210 MPa/730ºC. Manufacturing method optional. Technical specification
  • BS EN 3475 Aerospace series. Cables, electrical, aircraft use. Test methods
    • BS EN 3475-407:2009 Flammability
      Supersedes BS EN 3475-407:2005
    • BS EN 3475-505:2007 Tensile test on conductors and strands
      Supersedes BS EN 3475-505:2002
    • BS EN 3475-515:2009 Crush resistance
    • BS EN 3475-812:2009 Return loss (VSWR)
  • BS EN 3614:2009 Aerospace series. Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated. Classification: 900 MPa/650ºC
  • BS EN 3733-001:2009 Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150ºC continuous. Technical specification
  • BS EN 4018:2009 Aerospace series. Pipe coupling 8º30' in titanium alloy. Elbows 90º with thrust wire nut
    Supersedes BS EN 4018:2001
  • BS EN 4024:2009 Aerospace series. Pipe coupling 8º30' in titanium alloy. Elbows 45º welded end with thrust wire nut
    Supersedes BS EN 4024:2001
  • BS EN ISO 4063:2009 Welding and allied processes. Nomenclature of processes and reference numbers
    Supersedes BS EN ISO 4063:2000
  • BS EN 4071:2009 Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425ºC
  • BS EN 4072:2009 Aerospace series. Screws, 100º countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425ºC
  • BS EN ISO 4073:2009 Dentistry. Information system on the location of dental equipment in the working area of the oral health care provider
    Supersedes BS EN ISO 4073:2005
  • BS EN 4132:2009 Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235ºC
  • BS EN 4199 Aerospace series. Bonding straps for aircraft
    • BS EN 4199-003:2009 Bonding strap assemblies with flat braided conductor copper, tin plated -65ºC up to 150ºC and copper, nickel plated -65ºC up to 260ºC. Product standard
    • BS EN 4199-004:2009 Round bonding straps, copper, tin plated -65ºC up to 150ºC and nickel plated -65ºC up to 260ºC. Product standard
  • BS EN 4635:2009 Aerospace series. Screws, 100º countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1270 MPa (at ambient temperature)/650ºC
  • BS EN ISO 5492:2009 Sensory analysis. Vocabulary
    Supersedes BS 5098:1992
  • BS EN ISO 6892-1:2009 Metallic materials. Tensile testing. Method of test at ambient temperature
    Supersedes BS EN 10002-1:2001
  • BS EN 9100:2009 Aerospace series. Quality management systems. Requirements (based on ISO 9001:2000) and Quality systems. Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994)
    Supersedes BS EN 9100:2003
  • BS EN ISO 9168:2009 Dentistry. Hose connectors for air driven dental handpieces
    Supersedes BS EN 29168:1994
  • BS EN ISO 10139-2:2009 Dentistry. Soft lining materials for removable dentures. Materials for long-term use
    Supersedes BS EN ISO 10139-2:2001
  • BS EN 10238:2009 Automatically blast-cleaned and automatically prefabrication primed structural steel products
    Supersedes BS EN 10238:1997
  • BS EN ISO 10846-5:2009 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements. Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
  • BS EN ISO 10940:2009 Ophthalmic instruments. Fundus cameras
    Supersedes BS EN ISO 10940:1998
  • BS EN ISO 10944:2009 Ophthalmic instruments. Synoptophores
    Supersedes BS EN ISO 10944:1998
  • BS EN ISO 12401:2009 Small craft. Deck safety harness and safety line. Safety requirements and test methods
    Supersedes BS EN 1095:1998
  • BS EN 12613:2009 Plastics warning devices for underground cables and pipelines with visual characteristics
    Supersedes BS EN 12613:2001
  • BS EN 12707:2009 Plastics drums. Non-removable head (tight head) drums with a nominal capacity of 210 l and 225 l
    Supersedes BS EN 12707:2000
  • BS EN 12714:2009 Plastics drums. Removable head (open head) drums with a nominal capacity of 25 L to 60 L
    Supersedes BS EN 12714:2000
  • BS EN 12977-3:2008 Thermal solar systems and components. Custom built systems. Performance test methods for solar water heater stores
    Supersedes DD ENV 12977-3:2001
  • BS EN 13565-2:2009 Fixed firefighting systems. Foam systems. Design, construction and maintenance
  • BS EN 13751:2009 Foodstuffs. Detection of irradiated food using photostimulated luminescence
    Supersedes BS EN 13751:2002
  • BS EN ISO 14509-3:2009 Small craft. Airborne sound emitted by powered recreational craft. Sound assessment using calculation and measurement procedures
  • BS EN 14618:2009 Agglomerated stone. Terminology and classification
    Supersedes BS EN 14618:2005
  • BS EN ISO 14855-2:2009 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide. Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
  • BS EN ISO 15008:2009 Road vehicles. Ergonomic aspects of transport information and control systems. Specifications and test procedures for in-vehicle visual presentation
    Supersedes BS EN ISO 15008:2003
  • BS EN 15037 Precast concrete products. Beam-and-block floor systems
    • BS EN 15037-2:2009 Concrete blocks
    • BS EN 15037-3:2009 Clay blocks
  • BS EN 15154 Emergency safety showers
    • BS EN 15154-3:2009 Non plumbed-in body showers
    • BS EN 15154-4:2009 Non plumbed-in eyewash units
  • BS EN 15254-2:2009 Extended application of results from fire resistance tests. Non-loadbearing walls. Masonry and gypsum blocks
  • BS EN 15322:2009 Bitumen and bituminous binders. Framework for specifying cut-back and fluxed bituminous binders
  • BS EN 15544:2009 One off Kachelgrundöfen/Putzgrundöfen (tiled/mortared stoves). Dimensioning
  • BS EN ISO 22088-6:2009 Plastics. Determination of resistance to environmental stress cracking (ESC). Slow strain rate method
  • BS EN ISO 23210:2009 Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at low concentrations by use of impactors
  • BS EN 50342-4:2009 Lead-acid starter batteries. Dimensions of batteries for heavy vehicles
    Supersedes BS EN 60095-4:1993 which remains current
  • BS EN 60068-2-14:2009 Environmental testing. Tests. Test N. Change of temperature
    Supersedes BS EN 60068-2-14:2000 and BS EN 60068-2-33:2000
  • BS EN 60300-3-16:2008 Dependability management. Application guide. Guidelines for specification of maintenance support services
  • BS EN 60393-1:2009 Potentiometers for use in electronic equipment. Generic specification
    Supersedes BS QC 410000:1990
  • BS EN 61535:2009 Installation couplers intended for permanent connection in fixed installations
    Supersedes BS 61535:2006
  • BS EN 61558-2-13:2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1100 V. Particular requirements and tests for auto transformers and power supply units incorporating auto transformers
    Supersedes BS EN 61558-2-13:2000
  • BS EN 61754-25:2009 Fibre optic connector interfaces. Type RAO connector family
  • BS EN 61755-3-7:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre
  • BS EN 61914:2009 Cable cleats for electrical installations
    Supersedes BS EN 50368:2003
  • BS EN 62271-104:2009 High-voltage switchgear and controlgear. Alternating current switches for rated voltages of 52 kv and above
    Supersedes BS EN 60265-2:1994 which remains current

BS Implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 702-1:2009 Machine tools. Connecting dimensions of spindle noses and work holding chucks. Conical connection
  • BS ISO 6209:2009 Rubber compounding ingredients. Carbon black. Determination of solvent-extractable material
    Supersedes BS 5293-16:1990
  • BS ISO 7299-2:2009 Diesel engines. End-mounting flanges for pumps. High-pressure supply pumps for common rail fuel injection systems
    Supersedes BS ISO 7299:1996
  • BS ISO 8178-4:2007 Reciprocating internal combustion engines. Exhaust emission measurement. Steady-state test cycles for different engine applications
    Supersedes BS EN ISO 8178-4:1996
  • BS ISO 8459:2009 Information and documentation. Bibliographic data element directory for use in data exchange and enquiry
    Supersedes BS ISO 8459-2:1992 and BS ISO 8459-3:1994
  • BS ISO/IEC 11889 Information technology. Trusted platform module
    • BS ISO/IEC 11889-2:2009 Design principles
    • BS ISO/IEC 11889-3:2009 Structures
    • BS ISO/IEC 11889-4:2009 Commands
  • BS ISO 13012 Rolling bearings. Accessories for sleeve type linear ball bearings
    • BS ISO 13012-1:2009 Boundary dimensions and tolerances for series 1 and 3
      Supersedes BS ISO 13012:1998
    • BS ISO 13012-2:2009 Boundary dimensions and tolerances for series 5
  • BS ISO 13041-6:2009 Test conditions for numerically controlled turning machines and turning centres. Accuracy of a finished test piece
    Supersedes BS ISO 13041-6:2005
  • BS ISO/IEC 13888-1:2009 Information technology. Security techniques. Non-repudiation. General
    Supersedes BS ISO/IEC 13888-1:2004
  • BS ISO 14625:2007 Space systems. Ground support equipment for use at launch, landing or retrieval sites. General requirements
    Supersedes BS Z 100:1999
  • BS ISO 16265:2009 Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA)
  • BS ISO 18436-3:2008+A1:2009 Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Requirements for training bodies and the training process
  • BS ISO/IEC 19792:2009 Information technology. Security techniques. Security evaluation of biometrics
  • BS ISO 20860-2:2009 Road vehicles. 50 ohms impedance radio frequency connection system interface. Test procedures
  • BS ISO 21047:2009 Information and documentation. International standard text code (ISTC)
  • BS ISO 21072-1:2009 Ships and marine technology. Marine environment protection. Performance testing of oil skimmers. Moving water conditions
  • BS ISO 22178:2009 Intelligent transport systems. Low speed following (LSF) systems. Performance requirements and test procedures
  • BS ISO 22241-4:2009 Diesel engines. NOx reduction agent AUS 32. Refilling interface
  • BS ISO 22837:2009 Vehicle probe data for wide area communications
  • BS ISO 22951:2009 Data dictionary and message sets for preemption and prioritization signal systems for emergency and public transport vehicles (PRESTO)
  • BS ISO 23081-2:2009 Information and documentation. Managing metadata for records. Conceptual and implementation issues
    Supersedes DD ISO/TS 23081-2:2007
  • BS ISO 24103:2009 Intelligent transport systems. Communications access for land mobiles (CALM). Media adapted interface layer (MAIL)
  • BS ISO 24293:2009 Water quality. Determination of individual isomers of nonylphenol. Method using solid phase extraction (SPE) and gas chromatography/mass spectrometry (GC/MS)
  • BS ISO 26867:2009 Road vehicles. Brake lining friction materials. Friction behaviour assessment for automotive brake systems
  • BS ISO 27448:2009 Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for self-cleaning performance of semiconducting photocatalytic materials. Measurement of water contact angle
  • BS ISO 28500:2009 Information and documentation. WARC file format
  • BS IEC 60951 Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditions
    • BS IEC 60951-1:2009 General requirements
    • BS IEC 60951-2:2009 Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air
    • BS IEC 60951-3:2009 Equipment for continuous high range area gamma monitoring
    • BS IEC 60951-4:2009 Equipment for continuous in-line or on-line monitoring of radioactivity in process streams
  • BS IEC 60965:2009 Nuclear power plants. Control rooms. Supplementary control points for reactor shutdown without access to the main control room

Published documents

  • PD 6703:2009 Structural bearings. Guidance on the use of structural bearings
  • PD CEN/TR 15569:2009 Solid biofuels. A guide for a quality assurance system
  • PD CEN/TR 15739:2008 Precast concrete products. Concrete finishes. Identification

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 4825 Stainless steel tubes and fittings for the food industry and other hygienic applications
    • BS 4825-3:1991+A2:2009 Specification for clamp type couplings
      AMENDMENT 2
    • BS 4825-4:1991+A1:2009 Specification for threaded (IDF type) couplings
      AMENDMENT 1
    • BS 4825-5:1991+A1:2009 Specification for recessed ring joint type couplings
      AMENDMENT 1
  • BS 870:2008 Specification for external micrometers
    CORRIGENDUM 1
  • BS 887:2008 Precision vernier calipers. Requirements and test methods
    CORRIGENDUM 1
  • BS 907:2008 Specification for dial gauges for linear measurement
    CORRIGENDUM 1
  • BS 957:2008 Specification for feeler gauges
    CORRIGENDUM 1
  • BS 969:2008 Specification for limits and tolerances on plain limit gauges
    CORRIGENDUM 1
  • BS 1580-1:2007 Unified screw threads. Screw threads with diameters 1?4 in and larger. Requirements
    CORRIGENDUM 1
  • BS 1643:2008 Specification for precision vernier height gauges
    CORRIGENDUM 1
  • BS 1685:2008 Bevel protractors (mechanical and optical). Requirements and test methods
    CORRIGENDUM 1
  • BS 3643-1:2007 ISO metric screw threads. Principles and basic data
    CORRIGENDUM 1
  • BS EN 280:2001+A2:2009 Mobile elevating work platforms. Design calculations. Stability criteria. Construction. Safety. Examinations and tests
    AMENDMENT 2
  • BS EN 703:2004+A1:2009 Agricultural machinery. Silage loading, mixing and/or chopping and distributing machines. Safety
    AMENDMENT 1
  • BS EN 706:1996+A1:2009 Agricultural machinery. Vine shoot tipping machines. Safety
    AMENDMENT 1
  • BS EN 1218 Safety of woodworking machines. Tenoning machines
    • BS EN 1218-2:2004+A1:2009 Double end tenoning and/or profiling machines fed by chain or chains
      AMENDMENT 1
    • BS EN 1218-3:2001+A1:2009 Hand fed tenoning machines with sliding table for cutting structural timbers
      AMENDMENT 1
    • BS EN 1218-4:2004+A2:2009 Edge banding machines fed by chain(s)
      AMENDMENT 2
  • BS EN 1265:1999+A1:2008 Safety of machinery. Noise test code for foundry machines and equipment
    AMENDMENT 1
  • BS EN 1303:2005 Building hardware. Cylinders for locks. Requirements and test methods
    CORRIGENDUM 1
  • BS EN 1452 Plastics piping systems for water supply. Unplasticized poly (vinyl chloride) (PVC-U)
    • BS EN 1452-1:1999 General
      CORRIGENDUM 3
    • BS EN 1452-2:1999 Pipes
      CORRIGENDUM 3
    • BS EN 1452-3:1999 Fittings
      CORRIGENDUM 3
    • BS EN 1452-4:1999 Valves and ancillary equipment
      CORRIGENDUM 3
    • BS EN 1452-5:1999 Fitness for purpose of the system
      CORRIGENDUM 3
  • BS EN 1670:2007 Building hardware. Corrosion resistance. Requirements and test methods
    CORRIGENDUM 1
  • BS EN 1827:1999+A1:2009 Respiratory protective devices. Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only. Requirements, testing, marking
    AMENDMENT 1
  • BS EN 1912:2004+A3:2009 Structural timber. Strength classes. Assignment of visual grades and species
    AMENDMENT 3
  • BS EN 1993-5:2007 Eurocode 3. Design of steel structures. Piling
    CORRIGENDUM 1
  • BS EN 1995-1-2:2004 Eurocode 5. Design of timber structures. General. Structural fire design
    CORRIGENDUM 2
  • BS EN 2606:2009 Aerospace series. 60º interface for adaptors, threaded, with lockring. Geometric configuration
    CORRIGENDUM 1
  • BS EN ISO 3382-2:2008 Acoustics. Measurement of room acoustic parameters. Reverberation time in ordinary rooms
    CORRIGENDUM 1
  • BS EN ISO 5436-2:2001 Geometrical product specifications (GPS). Surface texture. Profile method. Measurement standards. Software measurement standards
    CORRIGENDUM 2
  • BS EN ISO 9001:2008 Quality management systems. Requirements
    CORRIGENDUM 1
  • BS EN ISO 9047:2003 Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants at variable temperatures
    CORRIGENDUM 1
  • BS EN ISO 11117:2008 Gas cylinders. Valve protection caps and valve guards. Design, construction and tests
    CORRIGENDUM 1
  • BS EN 12470 Clinical thermometers
    • BS EN 12470-1:2000+A1:2009 Metallic liquid-in-glass thermometers with maximum device
      AMENDMENT 1
    • BS EN 12470-2:2000+A1:2009 Phase change type (dot matrix) thermometers
      AMENDMENT 1
    • BS EN 12470-3:2000+A1:2009 Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
      AMENDMENT 1
  • BS EN 13075-1:2009 (BS 2000-494:2009) Bitumen and bituminous binders. Determination of breaking behaviour. Determination of breaking value of cationic bituminous emulsions, mineral filler method
    CORRIGENDUM 1
  • BS EN 13094:2008 Tanks for the transport of dangerous goods. Metallic tanks with a working pressure not exceeding 0,5 bar. Design and construction
    CORRIGENDUM 1
  • BS EN 13411 Terminations for steel wire ropes. Safety
    • BS EN 13411-1:2002+A1:2008 Thimbles for steel wire rope slings
      AMENDMENT 1
    • BS EN 13411-4:2002+A1:2008 Metal and resin socketing
      AMENDMENT 1
  • BS EN 13414-1:2003+A2:2008 Steel wire rope slings. Safety. Slings for general lifting service
    AMENDMENT 2
  • BS EN 13480-3:2002+A3:2009 Metallic industrial piping. Design and calculation
    AMENDMENT 3
  • BS EN 13617-1:2004+A1:2009 Petrol filling stations. Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
    AMENDMENT 1
  • BS EN 13684:2004+A2:2009 Garden equipment. Pedestrian controlled lawn aerators and scarifiers. Safety
    AMENDMENT 2
  • BS EN 13795 Surgical drapes, gowns and clean air suits, used as medical devices, for patients, clinical staff and equipment
    • BS EN 13795-1:2002+A1:2009 General requirements for manufacturers, processors and products
      AMENDMENT 1
    • BS EN 13795-2:2004+A1:2009 Test methods
      AMENDMENT 1
    • BS EN 13795-3:2006+A1:2009 Performance requirements and performance levels
      AMENDMENT 1
  • BS EN 13942:2009 Petroleum and natural gas industries. Pipeline transportation systems. Pipeline valves
    CORRIGENDUM 1
  • BS EN 14017:2005+A2:2009 Agricultural and forestry machinery. Solid fertilizer distributors. Safety
    AMENDMENT 2
  • BS EN 14067-4:2005+A1:2009 Railway applications. Aerodynamics. Requirements and test procedures for aerodynamics on open track
    AMENDMENT 1
  • BS EN 14116:2007+A1:2008 Tanks for transport of dangerous goods. Digital interface for the product recognition device
    AMENDMENT 1
  • BS EN ISO 15085:2003+A1:2009 Small craft. Man-overboard prevention and recovery
    AMENDMENT 1
  • BS EN 15326:2007+A1:2009 (BS 2000-549:2007) Bitumen and bituminous binders. Measurement of density and specific gravity. Capillary stoppered pyknometer method
    AMENDMENT 1
  • BS EN 15532:2008 Cycles. Terminology
    CORRIGENDUM 2
  • BS EN ISO 21487:2006 Small craft. Permanently installed petrol and diesel fuel tanks
    CORRIGENDUM 1
  • BS EN 50131-1:2006+A1:2009 Alarm systems. Intrusion and hold-up systems. System requirements
    AMENDMENT 1
  • BS EN 50436-1:2005 Alcohol interlocks. Test methods and performance requirements. Instruments for drink-driving-offender programs
    CORRIGENDUM 1
  • BS EN 55014-1:2006+A1:2009 Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Emission
    AMENDMENT 1
  • BS EN 60065:2002+A1:2006 Audio, video and similar electronic apparatus. Safety requirements
    AMENDMENT 11
  • BS EN 60519-4:2006 Safety in electroheat installations. Particular requirements for arc furnace installations
    CORRIGENDUM 1
  • BS EN 60896-21:2004 Stationary lead-acid batteries. Valve regulated types. Methods of test
    CORRIGENDUM 1
  • BS EN 61000 Electromagnetic compatibility (EMC)
    • BS EN 61000-4-27:2000+A1:2009 Testing and measurement techniques. Unbalance, immunity test for equipment with input current not exceeding 16 A per phase
      AMENDMENT 1
    • BS EN 61000-4-28:2000+A2:2009 Testing and measurement techniques. Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase
      AMENDMENT 2
  • BS EN 61646:2008 Thin-film terrestrial photovoltaic (PV) modules. Design qualification and type approval
    CORRIGENDUM 1
  • BS EN 62305-3:2006 Protection against lightning. Physical damage to structures and life hazard
    AMENDMENT 11
  • BS ISO 3272-1:2003 Microfilming of technical drawings and other drawing office documents. Operating procedures
    CORRIGENDUM 1
  • BS ISO 6394:2008 Earth-moving machinery. Determination of emission sound pressure level at operator's position. Stationary test conditions
    CORRIGENDUM 1
  • BS ISO 6396:2008 Earth-moving machinery. Determination of emission sound pressure level at operator's position. Dynamic test conditions
    CORRIGENDUM 1
  • BS ISO/IEC 7816-4:2005+A1:2008 Identification cards. Integrated circuit cards. Organization, security and commands for interchange
    AMENDMENT 1
  • BS ISO/IEC 9541-3:1994+A2:2009 Information technology. Font information interchange. Glyph shape representation
    AMENDMENT 2
  • BS ISO 11843-1:1997 Capability of detection. Terms and definitions
    CORRIGENDUM 2
  • BS ISO/IEC 11889 Information technology. Trusted platform module
    • BS ISO/IEC 11889-2:2009 Design principles
      CORRIGENDUM 1
    • BS ISO/IEC 11889-3:2009 Structures
      CORRIGENDUM 1
    • BS ISO/IEC 11889-4:2009 Commands
      CORRIGENDUM 1
  • BS ISO/IEC 14888-3:2006 Information technology. Security techniques. Digital signatures with appendix. Discrete logarithm based mechanisms
    CORRIGENDUM 2
  • BS ISO 15665:2003 Acoustics. Acoustic insulation for pipes, valves and flanges
    CORRIGENDUM 1
  • PD ISO/TS 16949:2009 Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations
    CORRIGENDUM 1
  • BS ISO 17604:2003+A1:2009 Microbiology of food and animal feeding stuffs. Carcass sampling for microbiological analysis
    AMENDMENT 1
  • BS ISO 18431-1:2005 Mechanical vibration and shock. Signal processing. General introduction
    CORRIGENDUM 1
  • DD ISO/TS 22367:2008 Medical laboratories. Reduction of error through risk management and continual improvement
    CORRIGENDUM 1
  • BS ISO 25981:2008 Road vehicles. Connectors for the electrical connection of towing and towed vehicles. Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage
    CORRIGENDUM 1

British Standard declared obsolescent

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

  • BS 4346-2:1970 Joints and fittings for use with unplasticized PVC pressure pipes. Mechanical joints and fittings, principally of unplasticized PVC
    This standard has been declared obsolescent as it applies to pipework with a design life of 50 years and should therefore not yet be withdrawn

British Standards withdrawn

  • BS 3165:1986 Specification for rubber and plastics suction hoses and hose assemblies for fire-fighting purposes
    Superseded by BS 3165:2009 and BS EN ISO 14557:2002
  • BS 5098:1992 Glossary of terms relating to sensory analysis
    Superseded by BS EN ISO 5492:2009
  • BS 5210:1975 Specification for standard dimensions of scintillators
    This standard has been withdrawn as the international equivalent IEC 60412:1973 has been withdrawn
  • BS 5293-16:1990 Sampling and testing carbon black for use in the rubber industry. Method for determination of solvent extractable material
    Superseded by BS ISO 6209:2009
  • BS 5542:1978 Specification for dimensions of test tubes made of glass or plastics for radioactivity measurements
    This standard has been withdrawn as the international equivalent IEC 583:1977 has been withdrawn
  • BS 5650:1978 Specification for apparatus for gamma radiography
    This standard has been withdrawn as the international equivalent ISO 3999:1977 has been withdrawn
  • BS 5752-12:1992 Methods of test for coffee and coffee products. Coffee: determination of caffeine content (routine method by HPLC)
    This standard has been withdrawn as the international equivalent ISO 10095:1992 has been withdrawn
  • BS 6068-6.8:1993 Water quality. Sampling. Guidance on sampling of wet deposition
    This standard has been withdrawn as it is no longer applicable to the UK situation
  • BS 6090:1981 Specification for personal photographic dosemeters
    This standard has been withdrawn as the international equivalent ISO 1757:1980 has been withdrawn
  • BS 6234:1987 Specification for polyethylene insulation and sheath of electric cables
    This standard has been withdrawn as it is no longer relevant, since the standards that it supported have been withdrawn
  • BS 7371-3:1993 Coatings on metal fasteners. Specification for electroplated zinc and cadmium coatings
    Superseded by BS 7371-3:2009 and BS EN ISO 4042:2000
  • BS 7518:1995 Radiation protection instrumentation. Portable, transportable or installed equipment to measure x or gamma radiation for environmental monitoring. Integrating assemblies
    This standard has been withdrawn as the international equivalent IEC 61017-2:1994 has been withdrawn
  • BS 61535:2006 Installation couplers intended for permanent connection in fixed installations
    Superseded by BS EN 61535:2009
  • DD ENV 623-5:2002. Advanced technical ceramics. Monolithic ceramics. General and textural properties. Determination of phase volume fraction by evaluation of micrographs
    Superseded by BS EN 623-5:2009
  • DD ENV 1006:2003 Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties
    Superseded by BS EN 1006:2009
  • DD CEN/TS 1071-10:2004. Advanced technical ceramics. Methods of test for ceramic coatings. Determination of coating thickness by cross section
    Superseded by BS EN 1071-10:2009
  • BS EN 1095:1998 Deck safety harness and safety line for use on recreational craft. Safety requirements and test methods
    Superseded by BS EN ISO 12401:2009
  • BS EN ISO 8178-4:1996 Reciprocating internal combustion engines. Exhaust emission measurement. Test cycles for different engine applications
    Superseded by BS ISO 8178-4:2007
  • BS EN 10002-1:2001 Tensile testing of metallic materials. Method of test at ambient temperature
    Superseded by BS EN ISO 6892-1:2009
  • BS EN 12540:2000 Corrosion protection of metals. Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and copper plus nickel plus chromium
    Superseded by BS EN ISO 1456:2009
  • DD ENV 12977-3:2001. Thermal solar systems and components. Custom built systems. Performance characterisation of stores for solar heating systems
    Superseded by BS EN 12977-3:2008
  • BS EN 29168:1994 Dental handpieces. Hose connectors
    Superseded by BS EN ISO 9168:2009
  • BS EN 50020:2002. Electrical apparatus for potentially explosive atmospheres. Intrinsic safety 'i'
    Superseded by BS EN 60079-11:2007
  • BS EN 50116:1996 Information technology equipment. Routine electrical safety testing in production
    Superseded by BS EN 50116:2006
  • BS EN 50368:2003 Cable cleats for electrical installations
    Superseded by BS EN 61914:2009
  • BS EN 55022:1998 Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement
    Superseded by BS EN 55022:2006
  • BS EN 60068-2-33:2000 Environmental testing. Test methods. Guidance on change of temperature tests
    Superseded by BS EN 60068-2-14:2009
  • BS EN 60079 Electrical apparatus for explosive gas atmospheres
    • BS EN 60079-7:2003 Increased safety “e”
      Superseded by BS EN 60079-7:2007
    • BS EN 60079-26:2004 Construction, test and marking of group II category I G electrical apparatus
      Superseded by BS EN 60079-26:2007
  • BS EN 60317-30:1997 Specifications for particular types of winding wires. Polyimide enamelled rectangular copper wire, class 220
    This standard has been withdrawn as the IEC equivalent has also been withdrawn
  • BS EN 60958-3:2003 Digital audio interface. Consumer applications
    Superseded by BS EN 60958-3:2006
  • BS EN 61000-4-5:1995 Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test
    Superseded by BS EN 61000-4-5:2006
  • BS EN 61300-2-25:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Sealing endurance for closures
    This standard has been withdrawn as the IEC equivalent has also been withdrawn
  • BS ISO 7299:1996 Diesel engines. End-mounting flanges for fuel injection pumps
    Superseded by BS ISO 7299-1:2007 and BS ISO 7299-2:2009
  • BS ISO 7900:2006 Steel wire and wire products for fences. Zinc and zinc-alloy-coated steel barbed wire
    This standard has been withdrawn as it conflicts with BS EN 10223-1:1998
  • BS ISO 7989 Steel wire and wire products. Non-ferrous metallic coatings on steel wire
    • BS ISO 7989-1:2006 General principles
      This standard has been withdrawn as it conflicts with BS EN 10244-1:2009
    • BS ISO 7989-2:2007 Zinc or zinc-alloy coating
      This standard has been withdrawn as it conflicts with BS EN 10244-2:2009
  • BS ISO 8459 Information and documentation. Bibliographic data element directory
    • BS ISO 8459-2:1992 Acquisitions applications
      Superseded by BS ISO 8459:2009
    • BS ISO 8459-3:1994 Information retrieval applications
      Superseded by BS ISO 8459:2009
  • BS ISO 13012:1998 Rolling bearings, linear motion, recirculating ball, sleeve type. Accessories
    Superseded by BS ISO 13012-1:2009
  • DD ISO/TS 23081-2:2007 Information and documentation. Records management processes. Metadata for records. Conceptual and implementation issues
    Superseded by BS ISO 23081-2:2009
  • BS Z 100:1999 Space systems. Ground support equipment for use at launch, landing, or retrieval sites. General requirements
    Superseded by BS ISO 14625:2007
  • BS QC 410000:1990 Harmonized system of quality assessment for electronic components: potentiometers for use in electronic equipment
    Superseded by BS EN 60393-1:2009

Published in international.