BRITISH STANDARDS

The following British Standard publications are available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel. The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 10:2009 Specification for flanges and bolting for pipes, valves and fittings
    Supersedes BS 10:1962
  • BS 812 Testing aggregates
    • BS 812-124:2009
      Method for determination of frost heave
      Supersedes BS 812-124:1989
  • BS 4875-5:2009 Strength and stability of furniture. Requirements for strength, durability and stability of tables and trolleys for domestic use
    Supersedes BS 4875-5:2001 which remains current
  • BS 7376:2009 Inclusion of glass in the construction of tables and trolleys for domestic use. Specification
    Supersedes BS 7376:2004 which remains current
  • BS 8468-3-1:2009 Respiratory protective devices for use against chemical, biological, radiological and nuclear (CBRN) agents. Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Specification
  • BS 8510:2009 Child use and care articles. Safety of children's sleep bags. Safety requirements and test methods
  • BS 8521:2009 Specification for dual-tone multi-frequency (DTMF) signalling protocol for social alarm systems
    Supersedes BS 7369:1991
  • BS 8887-2:2009 Design for manufacture, assembly, disassembly and end-of-life processing (MADE). Terms and definitions

BS EN PUBLICATIONS

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European standard.

  • BS EN 409:2009 Timber structures. Test methods. Determination of the yield moment of dowel type fasteners
    Supersedes BS EN 409:1993
  • BS EN 416-1:2009 Single burner gas-fired overhead radiant tube heaters for non-domestic use. Safety
    Supersedes BS EN 416-1:1999
  • BS EN 438-8:2009 High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates). Classification and specifications for design laminates
  • BS EN 528:2008 Rail dependent storage and retrieval equipment. Safety requirements
    Supersedes BS EN 528:1997
  • BS EN 573-3:2009 Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
    Supersedes BS EN 573-3:2007
  • BS EN ISO 734-2:2008 Oilseed meals. Determination of oil content. Rapid extraction method
    Supersedes BS EN ISO 734-2:2001
  • BS EN 777 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use
    • BS EN 777-1:2009 System D. Safety
      Supersedes BS EN 777-1:1999
    • BS EN 777-2:2009 System E. Safety
      Supersedes BS EN 777-2:1999
    • BS EN 777-3:2009 System F. Safety
      Supersedes BS EN 777-3:2000
    • BS EN 777-4:2009 System H. Safety
      Supersedes BS EN 777-4:1999
  • BS EN 859:2007 Safety of woodworking machines. Hand fed surface planing machines
    Supersedes BS EN 859:1998
  • BS EN ISO 898-1:2009 Mechanical properties of fasteners made of carbon steel and alloy steel. Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread
    Supersedes BS EN ISO 898-1:1999
  • BS EN 933-4:2008 Tests for geometrical properties of aggregates. Determination of particle shape. Shape index
    Supersedes BS EN 933-4:2000
  • BS EN 969:2009 Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods
    Supersedes BS EN 969:1996
  • BS EN 975-1:2009 Sawn timber. Appearance grading of hardwoods. Oak and beech
    Supersedes BS EN 975-1:1996
  • BS EN 1097-7:2008 Tests for mechanical and physical properties of aggregates. Determination of the particle density of filler. Pyknometer method
    Supersedes BS EN 1097-7:1999
  • BS EN 1119:2009 Plastics piping systems. Joints for glass reinforced thermosetting plastics (GRP) pipes and fittings. Test methods for leak tightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
    Supersedes the dual numbered standard BS EN 1119:1996, BS 2782-12:Method 1223C:1996
  • BS EN 1335 Office furniture. Office work chair
    • BS EN 1335-2:2009 Safety requirements
      Supersedes BS EN 1335-2:2000
    • BS EN 1335-3:2009 Test methods
      Supersedes BS EN 1335-3:2000
  • BS EN 1367-6:2008 Tests for thermal and weathering properties of aggregates. Determination of resistance to freezing and thawing in the presence of salt (NaCl)
  • BS EN 1380:2009 Timber structures. Test methods. Load bearing nails, screws, dowels and bolts
    Supersedes BS EN 1380:1999
  • BS EN 1398:2009 Dock levellers. Safety requirements
    Supersedes BS EN 1398:1998
  • BS EN 1429:2009 (BS 2000-91:2009) Bitumen and bituminous binders. Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving
    Supersedes the dual numbered standard BS EN 1429:2000, BS 2000-91:2000
  • BS EN 1430:2009 (BS 2000-292:2009) Bitumen and bituminous binders. Determination of particle polarity of bituminous emulsions
    Supersedes the dual numbered standard BS EN 1430:2000, BS 2000-292:2000
  • BS EN 1431:2009 (BS 2000-458:2009) Bitumen and bituminous binders. Determination of residual binder and oil distillate from bitumen emulsions by distillation
    Supersedes the dual numbered standard BS EN 1431:2000, BS 2000-458:2000
  • BS EN 1447:2009 Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure
    Supersedes the dual numbered standard BS EN 1447:1997, BS 2782-12:Method 1227A:1997
  • BS EN 1463-1:2009 Road marking materials. Retroreflecting road studs. Initial performance requirements
    Supersedes BS EN 1463-1:1998
  • BS EN 1852-1:2009 Plastics piping systems for non-pressure underground drainage and sewerage. Polypropylene (PP). Specifications for pipes, fittings and the system
    Supersedes BS EN 1852-1:1998
  • BS EN 3155-074:2009 Aerospace series. Electrical contacts used in elements of connection. Contacts, electrical, quadrax, size 8, male, type E, crimp, class R. Product standard
  • BS EN 3373-002:2009 Aerospace series. Terminal lugs and in-line splices for crimping on electrical conductors. General and list of product standard
  • BS EN 3375-008:2009 Aerospace series. Cable, electrical, for digital data transmission. Single braid. Star Quad 100 ohms. Type KD. Product standard
  • BS EN 3475 Aerospace series. Cables, electrical, aircraft use. Test methods
    • BS EN 3475-417:2009 Fire resistance of cables confined inside a harness
    • BS EN 3475-809:2009 Resistance unbalance
  • BS EN 3660 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors
    • BS EN 3660-017:2009 Cable outlet, style A, straight, unsealed, with cable tie strain relief. Product standard
    • BS EN 3660-018:2009 Cable outlet, style A, 90º, unsealed, with cable tie strain relief. Product standard
  • BS EN ISO 4126-3:2006 Safety devices for protection against excessive pressure. Safety valves and bursting disc safety devices in combination
  • BS EN 4301:2009 Aerospace series. Identification marking methods for engine items. Engineering requirements
  • BS EN 4604 Aerospace series. Cable, electrical, for signal transmission
    • BS EN 4604-009:2009 Cable, coaxial, light weight, 50 ohms, 180ºC, type KW (light WN). Product standard
    • BS EN 4604-010:2009 Cable, coaxial, light weight, 50 ohms, 200ºC, Type KX (light WN). Product standard
  • BS EN 4641-001:2009 Aerospace series. Cables, optical, 125 mm diameter cladding. Technical specification
  • BS EN 4644-003:2009 Aerospace series. Connector, electrical and optical, rectangular, modular, rectangular inserts, operating temperature 175ºC continuous. Rectangular inserts. Product standard
  • BS EN 4649:2009 Aerospace series. Handheld fire extinguishers with synthesis gases, for aircraft use. Technical specification and qualification conditions
  • BS EN ISO 8799:2009 Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Determination of content of unsulfated matter
    Supersedes BS EN ISO 8799:1996
  • BS EN 9104 Aerospace series. Quality management systems
    • BS EN 9104-002:2008 Requirements for oversight of aerospace quality management system certification/registrations programs
    • BS EN 9104-003:2009 Requirements for aerospace quality management system (AQMS) auditor training and qualification
  • BS EN 9121:2009 Aerospace series. Quality management systems. Assessment applicable to stockist distributors
    Supersedes BS EN 9121:2005
  • BS EN ISO 9241-410:2008 Ergonomics of human-system interaction. Physical input devices. Design criteria for products
    Partially supersedes BS EN ISO 9241-4:1998 and BS EN ISO 9241-9:2000
  • BS EN ISO 10079 Medical suction equipment
    • BS EN ISO 10079-1:2009 Electrically powered suction equipment. Safety requirements
      Supersedes BS EN ISO 10079-1:2000
    • BS EN ISO 10079-2:2009 Manually powered suction equipment
      Supersedes BS EN ISO 10079-2:2000
    • BS EN ISO 10079-3:2009 Suction equipment powered from a vacuum or pressure source
      Supersedes BS EN ISO 10079-3:2000
  • BS EN 10088 Stainless steels
    • BS EN 10088-4:2009 Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
    • BS EN 10088-5:2009 Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
  • BS EN ISO 10304-1:2009 Water quality. Determination of dissolved anions by liquid chromatography of ions. Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and sulphate
    Supersedes the dual numbered standards BS EN ISO 10304-1:1995, BS 6068-2.46:1995 and BS EN ISO 10304-2:1997, BS 6068-2.53:1997
  • BS EN 10343:2009 Steels for quenching and tempering for construction purposes. Technical delivery conditions
  • BS EN ISO 11117:2008 Gas cylinders. Valve protection caps and valve guards. Design, construction and tests
    Supersedes BS EN 962:1997
  • BS EN 12350-7:2009 Testing fresh concrete. Air content. Pressure methods
    Supersedes BS EN 12350-7:2000
  • BS EN 12373-7:2002 Aluminium and aluminium alloys. Anodizing. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment
    Supersedes BS EN 12373-7:1999
  • BS EN 12390 Testing hardened concrete
    • BS EN 12390-3:2009 Compressive strength of test specimens
      Supersedes BS EN 12390-3:2002
    • BS EN 12390-5:2009 Flexural strength of test specimens
      Supersedes BS EN 12390-5:2000
    • BS EN 12390-7:2009 Density of hardened concrete
      Supersedes BS EN 12390-7:2000
  • BS EN 12649:2008 Concrete compactors and smoothing machines. Safety
  • BS EN 12821:2009 Foodstuffs. Determination of vitamin D by high performance liquid chromatography. Measurement of cholecalciferol (D3) or ergocalciferol (D2)
    Supersedes BS EN 12821:2000
  • BS EN 12848:2009 (BS 2000-486:2009) Bitumen and bituminous binders. Determination of mixing stability with cement of bituminous emulsions
    Supersedes the dual numbered standard BS EN 12848:2002, BS 2000-486:2003
  • BS EN 12849:2009 (BS 2000-487:2009) Bitumen and bituminous binders. Determination of penetration power of bituminous emulsions
    Supersedes the dual numbered standard BS EN 12849:2002, BS 2000-487:2003
  • BS EN 12850:2009 (BS 2000-488:2009) Bitumen and bituminous binders. Determination of the pH value of bituminous emulsions
    Supersedes the dual numbered standard BS EN 12850:2002, BS 2000-488:2003
  • BS EN 13048:2009 Packaging. Flexible aluminium tubes. Internal lacquer film thickness measurement method
    Supersedes BS EN 13048:2000
  • BS EN 13075-1:2009 (BS 2000-494:2009) Bitumen and bituminous binders. Determination of breaking behaviour. Determination of breaking value of cationic bituminous emulsions, mineral filler method
    Supersedes the dual numbered standard BS EN 13075-1:2002, BS 2000-494:2002
  • BS EN 13158:2009 Protective clothing. Protective jackets, body and shoulder protectors for equestrian use: For horse riders and those working with horses, and for horse drivers. Requirements and test methods
    Supersedes BS EN 13158:2000
  • BS EN 13260:2009 Railway applications. Wheelsets and bogies. Wheelsets. Product requirements
    Supersedes BS EN 13260:2003
  • BS EN 13261:2009 Railway applications. Wheelsets and bogies. Axles. Product requirements
    Supersedes BS EN 13261:2003
  • BS EN 13277-7:2009 00Protective equipment for martial arts. Additional requirements and test methods for hand and foot protectors
  • BS EN 13303:2009 (BS 2000-506:2009) Bitumen and bituminous binders. Determination of the loss in mass after heating of industrial bitumen
    Supersedes the dual numbered standard BS EN 13303:2003, BS 2000-506:2003
  • BS EN 13304:2009 Bitumen and bituminous binders. Framework for specification of oxidised bitumen
    Supersedes BS EN 13304:2003
  • BS EN 13305:2009 Bitumen and bituminous binders. Framework for specification of hard industrial bitumens
    Supersedes BS EN 13305:2003
  • BS EN 13461:2009 Packaging. Cylindrical flexible laminated tubes. Dimensions and tolerances
    Supersedes BS EN 13461:2001
  • BS EN ISO 13769:2009 Gas cylinders. Stamp marking
    Supersedes BS EN ISO 13769:2006
  • BS EN 14545:2008 Timber structures. Connectors. Requirements
  • BS EN 14587-2:2009 Railway applications. Track. Flash butt welding of rails. New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant
  • BS EN 14592:2008 Timber structures. Dowel-type fasteners. Requirements
  • BS EN ISO 14889:2009 Ophthalmic optics. Spectacle lenses. Fundamental requirements for uncut finished lenses
    Supersedes BS EN ISO 14889:2003
  • BS EN 15089:2009 Explosion isolation systems
  • BS EN 15267 Air quality. Certification of automated measuring systems
    • BS EN 15267-1:2009 General principles
    • BS EN 15267-2:2009 Initial assessment of the AMS manufacturer's quality management system and post certification surveillance for the manufacturing process
  • BS EN 15381:2008 Geotextiles and geotextile-related products. Characteristics required for use in pavements and asphalt overlays
  • BS EN 15551:2009 Railway applications. Railway rolling stock. Buffers
  • BS EN 15594:2009 Railway applications. Track. Restoration of rails by electric arc welding
  • BS EN 15595:2009 Railway applications. Braking. Wheel slide protection
  • BS EN 15617:2009 Non-destructive testing of welds. Time-of-flight diffraction technique (TOFD). Acceptance levels
  • BS EN 15626:2009 Bitumen and bituminous binders. Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test. Aggregate method
  • BS EN 15646:2009 Electrodeposited coatings. Electroplated coatings of aluminium and aluminium alloys with supplementary treatment. Requirements and test methods
  • BS EN 15653:2009 Packaging. Flexible aluminium tubes. Test method to check the resistance of the internal protective coating against ammonia
  • BS EN 15691:2009 (BS 2000-576:2009) Ethanol as a blending component for petrol. Determination of total dry residue (involatile material). Gravimetric method
  • BS EN 15706:2009 Hardware for furniture. Strength and durability of slide fittings for sliding doors and roll fronts
  • BS EN ISO 17510 Sleep apnoea breathing therapy
    • BS EN ISO 17510-1:2009 Sleep apnoea breathing therapy equipment
      Supersedes BS EN ISO 17510-1:2007
    • BS EN ISO 17510-2:2009 Masks and application accessories
      Supersedes BS EN ISO 17510-2:2007
  • BS EN ISO 21079 Chemical analysis of refractories containing alumina, zirconia and silica. Refractories containing 5 percent to 45 percent of ZrO2 (alternative to the X-ray fluorescence method)
    • BS EN ISO 21079-1:2008 Apparatus, reagents and dissolution
    • BS EN ISO 21079-2:2008 Wet chemical analysis
    • BS EN ISO 21079-3:2008 Flame atomic absorption spectrophotometry (FAAS) and inductively coupled plasma emission spectrometry (ICP-AES)
  • BS EN ISO 23328-2:2009 Bathing system filters for anaesthetic and respiratory use. n-filtration aspects
    Supersedes BS EN ISO 23328-2:2008
  • BS EN ISO 23606:2009 Textiles. Knitted fabrics. Representation and pattern design
  • BS EN ISO 25619-2:2008 Geosynthetics. Determination of compression behaviour. Determination of short-term compression behaviour
  • BS EN 50131-3:2009 Alarm systems. Intrusion and hold-up systems. Control and indicating equipment
    Supersedes DD CLC/TS 50131-3:2003
  • BS EN 50216-10:2009 Power transformer and reactor fittings. Oil-to-air heat exchangers
  • BS EN 50242:2008 (BS EN 60436:2008) Electric dishwashers for household use. Methods for measuring the performance
    Supersedes BS EN 50242:1999 which remains current
  • BS EN 50490:2008 Electrical installations for lighting and beaconing of aerodromes. Technical requirements for aeronautical ground lighting control and monitoring systems. Units for selective switching and monitoring of individual lamps
  • BS EN 60079-10-1:2009 Explosive atmospheres. Classification of areas. Explosive gas atmospheres
    Supersedes BS EN 60079-10:2003
  • BS EN 60404-8-6:2009 Magnetic materials. Specifications for individual materials. Soft magnetic metallic materials
    Supersedes BS 6404-8.6:1988
  • BS EN 60689:2009 Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
  • BS EN 61000-4-30:2009 Electromagnetic compatibility (EMC). Testing and measurement techniques. Power quality measurement methods
    Supersedes BS EN 61000-4-30:2003 which remains current
  • BS EN 61169-38:2009 Radio-frequency connectors. Sectional specification. Radio frequency coaxial connectors model, slide-in (rack and panel applications). Characteristic impedance 50 ohms (type TMA). 50 ohms applications
    Supersedes DD IEC/PAS 61169-38:2007
  • BS EN 61249 Materials for printed boards and other interconnecting structures
  • BS EN 61249-2-35:2009 Reinforced base materials, clad and unclad. Modified epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
  • BS EN 61249-2-37:2009 Reinforced base materials, clad and unclad. Modified non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
  • BS EN 61300 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
    • BS EN 61300-2-2:2008 Tests. Mating durability
      Supersedes BS EN 61300-2-2:2003
    • BS EN 61300-3-2:2009 Examinations and measurements. Polarization dependent loss in a single-mode fibre optic device
      Supersedes BS EN 61300-3-2:1999 and BS EN 61300-3-12:1997
  • BS EN 61300-3-34:2009 Examinations and measurements. Attenuation of random mated connectors
    Supersedes BS EN 61300-3-34:2002
  • BS EN 61557 Electrical safety in low voltage distribution systems up to 1000 V A.C. and 1500 V D.C. Equipment for testing, measuring or monitoring of protective measures
    • BS EN 61557-9:2009 Equipment for insulation fault location in IT systems
      Supersedes BS EN 61557-9:2000
    • BS EN 61557-11:2009 Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems
  • BS EN 61800-7-204:2008 Adjustable speed electrical power drive systems. Generic interface and use of profiles for power drive systems. Profile type 4 specification
    Partially replaces BS EN 61491:1999
  • BS EN 62220-1-3:2008 Medical electrical equipment. Characteristics of digital X-ray imaging devices. Determination of the detective quantum efficiency. Detectors used in dynamic imaging
  • BS EN 62310-3:2008 Static transfer systems (STS). Method for specifying performance and test requirements
  • BS EN 62369-1:2009 Evaluation of human exposure to electromagnetic fields from short range devices (SRDs) in various applications over the frequency range 0 GHz to 300 GHz. Fields produced by devices used for electronic article surveillance, radio frequency identification and similar systems
    Supersedes BS EN 50357:2001

BS ENs IMPLEMENTED BY AMENDMENT

  • BS EN ISO 6974-6:2008 Natural gas. Determination of composition with defined uncertainty by gas chromatography. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
    Implementation of European Standard EN ISO 6974-6 by amendment to BS ISO 6974-6:2002.
  • BS EN 62246-2:2008 Reed contact units. Heavy-duty reed switches
    Implementation of European Standard EN 62246-2 by amendment to BS IEC 62246-2:2007.

BS IMPLEMENTATIONS

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 4993:2009 Steel and iron castings. Radiographic inspection
  • BS ISO 6099:2009 Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types
    Supersedes BS ISO 6099:2001
  • BS ISO 6145-7:2009 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
    Supersedes BS ISO 6145-7:2001
  • BS ISO 6194 Rotary shaft lip-type seals incorporating elastomeric sealing elements
    • BS ISO 6194-2:2009 Vocabulary
      Supersedes BS 7780-2:1994
    • BS ISO 6194-4:2009 Performance test procedures
      Supersedes BS ISO 6194-4:1999
  • BS ISO 6301-1:2009 Pneumatic fluid power. Compressed-air lubricators. Main characteristics to be included in supplier's literature and product-marking requirements
    Supersedes BS ISO 6301-1:1997
  • BS ISO 6914:2008 Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension
    Supersedes BS 903-A52:1986
  • BS ISO 7267 Rubber-covered rollers. Determination of apparent hardness
    • BS ISO 7267-1:2008 IRHD method
      Supersedes BS 7442-3.1:1998
    • BS ISO 7267-2:2008 Shore-type durometer method
      Supersedes BS 7442-3.2:1991
  • BS ISO 8116 Textile machinery and accessories. Beams for winding
    • BS ISO 8116-2:2008 Warper's beams
    • BS ISO 8116-3:2008 Weaver's beams
    • BS ISO 8116-4:2008 Test methods and quality classification of flanges for weaver's beams, warper's beams and sectional beams
    • BS ISO 8116-5:2008 Sectional beams for warp knitting machines
  • BS ISO/IEC 9541-4:2009 Information technology. Font information interchange. Harmonization to open font format
  • BS ISO 10263 Earth-moving machinery. Operator enclosure environment
    • BS ISO 10263-1:2009 Terms and definitions
      Supersedes BS 6912-22.1:1996
    • BS ISO 10263-2:2009 Air filter element test method
      Supersedes BS 6912-22.2:1996
    • BS ISO 10263-3:2009 Pressurization test method
      Supersedes BS 6912-22.3:1996
    • BS ISO 10263-4:2009 Heating, ventilating and air conditioning (HVAC) test method and performance
      Supersedes BS 6912-22.4:1996
    • BS ISO 10263-5:2009 Windscreen defrosting system test method
      Supersedes BS 6912-22.5:1996
    • BS ISO 10263-6:2009 Determination of effect of solar heating
      Supersedes BS 6912-22.6:1996
  • BS ISO 10317:2008 Rolling bearings. Tapered roller bearings. Designation system
    Supersedes BS 3134-4:1992
  • BS ISO 11494:2008 Jewellery. Determination of platinum in platinum jewellery alloys. Inductively coupled plasma (ICP) solution-spectrometric method using yttrium as internal standard element
  • BS ISO 13041-3:2009 Test conditions for numerically controlled turning machines and turning centres. Geometric tests for machines with inverted vertical workholding spindles
  • BS ISO 14798:2009 Lifts (elevators), escalators and moving walks. Risk assessment and reduction methodology
    Supersedes DD ISO/TS 14798:2006
  • BS ISO 15371:2009 Ships and marine technology. Fire-extinguishing systems for protection of galley cooking equipment
    Supersedes BS ISO 15371:2000
  • BS ISO 15754:2009 Paper and board. Determination of z-directional tensile strength
  • BS ISO 16628:2008 Tracheobronchial tubes. Sizing and marking
    Supersedes DD ISO/TS 16628:2003
  • BS ISO 16814:2008 Building environment design. Indoor air quality. Methods of expressing the quality of indoor air for human occupancy
  • BS ISO 18280:2005 Plastics. Epoxy resins. Test methods
  • BS ISO 18932:2009 Imaging materials. Adhesive mounting systems. Specifications
    Supersedes BS ISO 18932:2005
  • BS ISO 21789:2009 Gas turbine applications. Safety
  • BS ISO 22742:2005 Packaging. Linear bar code and two dimensional symbols for product packaging
  • BS ISO 22915 Industrial trucks. Verification of stability
    • BS ISO 22915-1:2008 General
    • BS ISO 22915-10:2008 Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
      Supersedes BS ISO 10658:1996
  • BS ISO 24637:2009 Space systems. Electromagnetic interference (EMI) test reporting requirements
  • BS ISO/IEC 24708:2008 Information technology. Biometrics. BioAPI Interworking Protocol
  • BS ISO 26428 Digital cinema (D-cinema) distribution master
    • BS ISO 26428-1:2008 Image characteristics
    • BS ISO 26428-2:2008 Audio characteristics
  • BS ISO 26429 Digital cinema (D-cinema) packaging
    • BS ISO 26429-3:2008 Sound and picture track file
    • BS ISO 26429-4:2008 MXF JPEG 2000 application
    • BS ISO 26429-6:2008 MXF track file essence encryption
    • BS ISO 26429-7:2008 Composition playlist
  • BS ISO 26430 Digital cinema (D-cinema) operations
    • BS ISO 26430-2:2008 Digital certificate
    • BS ISO 26430-3:2008 Generic extra-theatre message format
  • BS ISO 26431-1:2008 Digital cinema (D-cinema) quality. Screen luminance level, chromaticity and uniformity
  • BS ISO 26432-2:2008 Digital source processing. Digital cinema (D-cinema) low frequency effects (LFE) channel audio characteristics
  • BS ISO 26603:2008 Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of total chlorine
  • BS ISO 26865:2009 Road vehicles. Brake lining friction materials. Standard performance test procedure for commercial vehicles with air brakes
  • BS ISO 26906:2009 Hydrometry. Fishpasses at flow measurement structures
  • BS ISO 27588:2008 Rubber, vulcanized or thermoplastic. Determination of dead-load hardness using the very low rubber hardness (VLRH) scale
  • BS ISO 28239:2008 Textile machinery. Opener and cleaner for staple fibres preparation. Vocabulary and principles of construction
  • BS ISO 29822:2009 Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols
  • BS ISO 29841:2009 Vegetable fats and oils. Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins)
  • BS ISO 30000:2009 Ships and marine technology. Ship recycling management systems. Specifications for management systems for safe and environmentally sound ship recycling facilities
    Supersedes DD ISO/PAS 30000:2008
  • BS ISO 80000-9:2009 Quantities and units. Physical chemistry and molecular physics
    Supersedes BS ISO 31-8:1992

PUBLISHED DOCUMENTS

  • PD ISO/TR 13154:2009 Medical electrical equipment. Deployment, implementation and operational guidelines for indentifying febrile humans using a screening thermograph
  • PD CEN/TR 15068:2009 Gas welding equipment. Measurement of noise emitted by blowpipe for welding, cutting, heating, brazing and soldering. Measurement method
  • PD CEN/TR 15371:2009 Safety of toys. Replies to requests for interpretation of EN 71-1, EN 71-2 and EN 71-8
    Supersedes PD CEN/TR 15371:2006
  • PD CEN/TR 15855:2009 Construction products. Assessment of release of dangerous substances. Barriers to trade
  • PD CEN/TR 15858:2009 Construction products. Assessment of the release of regulated dangerous substances from construction products based on the WT, WFT/FT procedures
  • PD ISO/IEC TR 24714-1:2008 Information technology. Biometrics. Jurisdictional and societal considerations for commercial applications. General guidance
  • PD ISO/TR 25477:2008 Paper, board and pulps. Basic guidelines for image analysis measurements
  • PD IEC/TR 62518:2009 Rare earth sintered magnets. Stability of the magnetic properties at elevated temperatures

PUBLICLY AVAILABLE SPECIFICATIONS

Publicly Available Specifications (formerly Product Assessment Specifications) are issued to provide an interim document where there is a market need but where a full Standard has yet to be published.

  • PAS 700:2009 Provision of ICT facilities and services in workplaces. Specification
  • PAS 1188 Flood protection products. Specification
    • PAS 1188-1:2009 Building aperture products
      Supersedes PAS 1188-1:2003
    • PAS 1188-2:2009 Temporary products
      Supersedes PAS 1188-2:2003
    • PAS 1188-3:2009 Building skirt systems
      Supersedes PAS 1188-3:2003
    • PAS 1188-4:2009 Demountable products
      Supersedes PAS 1188-2:2003

AMENDMENTS TO BRITISH STANDARDS

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and amendments to British Standards were made available last month.

  • BS 3655:1981+A1:2009 Recommendations for informative labelling of textile floor coverings
    AMENDMENT 1
  • BS 6593:1985+A1:2009 Code of practice for on-site non-mechanical jointing of plied textile and steel reinforced conveyor belting
    AMENDMENT 1
  • BS 6779-3:1994 Highway parapets for bridges and other structures. Specification for vehicle containment parapets of combined metal and concrete construction
    CORRIGENDUM 1
  • BS 7858:2006+A2:2009 Security screening of individuals employed in a security environment. Code of practice
    AMENDMENT 2
  • BS EN 71-1:2005+A8:2009 Safety of toys. Mechanical and physical properties
    AMENDMENT 8
  • BS EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts. Electric and hydraulic service lifts
    AMENDMENT 1
  • BS EN 792 Hand-held non-electric power tools. Safety requirements
    • BS EN 792-1:2000+A1:2008 Assembly power tools for non-threaded mechanical fasteners
      AMENDMENT 1
    • BS EN 792-3:2000+A1:2008 Drills and tappers
      AMENDMENT 1
    • BS EN 792-8:2001+A1:2008 Sanders and polishers
      AMENDMENT 1
  • BS EN 953:1997+A1:2009 Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
    AMENDMENT 1
  • BS EN 982:1996+A1:2008 Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
    AMENDMENT 1
  • BS EN 983:1996+A1:2008 Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
    AMENDMENT 1
  • BS EN 1093-4:1996+A1:2008 Safety of machinery. Evaluation of the emission of airborne hazardous substances. Capture efficiency of an exhaust system. Tracer method
    AMENDMENT 1
  • BS EN 1114-3:2001+A1:2008 Plastics and rubber machines. Extruders and extrusion lines. Safety requirements for haul-offs
    AMENDMENT 1
  • BS EN 1494:2000+A1:2008 Mobile or movable jacks and associated lifting equipment
    AMENDMENT 1
  • BS EN 1677 Components for slings. Safety
    • BS EN 1677-1:2000+A1:2008 Forged steel components, Grade 8
      AMENDMENT 1
    • BS EN 1677-4:2000+A1:2008 Links, Grade 8
      AMENDMENT 1
    • BS EN 1677-5:2001+A1:2008 Forged steel lifting hooks with latch. Grade 4
      AMENDMENT 1
    • BS EN 1677-6:2001+A1:2008 Links. Grade 4
      AMENDMENT 1
  • BS EN 3638:2007 Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Consumable electrode remelted. Solution and precipitation treated. Sheet, strip and plate. 0,5 mm ??a ??10 mm
    CORRIGENDUM 1
  • BS EN ISO 4404-2:2003 Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids. Non-aqueous fluids
    CORRIGENDUM 1
  • BS EN ISO 6330:2001+A1:2009 Textiles. Domestic washing and drying procedures for textile testing
    AMENDMENT 1
  • BS EN 12016:2004+A1:2008 Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity
    AMENDMENT 1
  • BS EN 12198 Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery
    • BS EN 12198-1:2000+A1:2008 General principles
      AMENDMENT 1
    • BS EN 12198-2:2002+A1:2008 Radiation emission measurement procedure
      AMENDMENT 1
  • BS EN 12487:2007 Corrosion protection of metals. Rinsed and nonrinsed chromate conversion coatings on aluminium and aluminium alloys
    CORRIGENDUM 1
  • BS EN 12549:1999+A1:2008 Acoustics. Noise test code for fastener driving tools. Engineering method
    AMENDMENT 1
  • BS EN 12635:2002+A1:2008 Industrial, commercial and garage doors and gates. Installation and use
    AMENDMENT 1
  • BS EN 12915-2:2003 Products used for the treatment of water intended for human consumption. Granular activated carbon. Reactivated granular activated carbon
    CORRIGENDUM 1
  • BS EN 12921 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours
    • BS EN 12921-3:2005+A1:2008 Safety of machines using flammable cleaning liquids
      AMENDMENT 1
    • BS EN 12921-4:2005+A1:2008 Safety of machines using halogenated solvents
      AMENDMENT 1
  • BS EN 12941:1998+A2:2008 Respiratory protective devices. Powered filtering devices incorporating a helmet or a hood. Requirements, testing, marking
    AMENDMENT 2
  • BS EN 12942:1998+A2:2008 Respiratory protective devices. Power assisted filtering devices incorporating full face masks, half masks or quarter masks. Requirements, testing, marking
    AMENDMENT 2
  • BS EN 13102:2005+A1:2008 Ceramic machines. Safety. Loading and unloading of fine clay tiles
    AMENDMENT 1
  • BS EN 13108 Bituminous mixtures. Material specifications
    • BS EN 13108-20:2006 Type testing
      CORRIGENDUM 1
    • BS EN 13108-21:2006 Factory production control
      CORRIGENDUM 1
  • BS EN 13414-3:2003+A1:2008 Steel wire rope slings. Safety. Grommets and cable-laid slings
    AMENDMENT 1
  • BS EN 13785:2005+A1:2008 Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures
    AMENDMENT 1
  • BS EN 13786:2004+A1:2008 Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures
    AMENDMENT 1
  • BS EN 13862:2001+A1:2009 Floor cutting-off machines. Safety
    AMENDMENT 1
  • BS EN 13889:2003+A1:2008 Forged steel shackles for general lifting purposes. Dee shackles and bow shackles. Grade 6. Safety
    AMENDMENT 1
  • BS EN 14017:2005+A1:2008 Agricultural and forestry machinery. Solid fertilizer distributors. Safety
    AMENDMENT 1
  • BS EN 14035-19:2003 Fireworks. Hand-held sparklers. Specification and test methods
    CORRIGENDUM 1
  • BS EN 15061:2007+A1:2008 Safety of machinery. Safety requirements for strip processing line machinery and equipment
    AMENDMENT 1
  • BS EN ISO 22794:2007 Dentistry. Implantable materials for bone filling and augmentation in oral and maxillofacial surgery. Contents of a technical file
    CORRIGENDUM 1
  • BS EN 50083-8:2002+A11:2008 Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility for networks
    AMENDMENT 11
  • BS EN 60127-4:2005+A1:2009 Miniature fuses. Universal modular fuse-links (UMF). Through-hole and surface mount types
    AMENDMENT 1
  • BS EN 60204-1:2006+A1:2009 Safety of machinery. Electrical equipment of machines. General requirements
    AMENDMENT 1
  • BS EN 60335 Household and similar electrical appliances. Safety
    • BS EN 60335-2-15:2002+A2:2008 Particular requirements for appliances for heating liquids
      AMENDMENT 2
    • BS EN 60335-2-16:2003+A1:2008 Particular requirements for food waste disposers
      AMENDMENT 1
    • BS EN 60335-2-17:2002+A2:2009 Particular requirements for blankets, pads, clothing and similar flexible heating appliances
      AMENDMENT 2
    • BS EN 60335-2-21:2003+A2:2008 Particular requirements for storage water heaters
      AMENDMENT 2
    • BS EN 60335-2-34:2002+A2:2009 Particular requirements for motor-compressors
      AMENDMENT 2
    • BS EN 60335-2-39:2003+A2:2008 Particular requirements for commercial electric multi-purpose cooking pans
      AMENDMENT 2
    • BS EN 60335-2-43:2003+A2:2008 Particular requirements for clothes dryers and towel rails
      AMENDMENT 2
    • BS EN 60335-2-96:2002+A2:2009 Particular requirements for flexible sheet heating elements for room heating
      AMENDMENT 2
  • BS EN 60898-1:2003+A1:2004 Electrical accessories. Circuit breakers for overcurrent protection for household and similar installations. Circuit-breakers for A.C. operation
    AMENDMENT 12
  • BS EN 60950-23:2006 Information technology equipment. Safety. Large data storage equipment
    CORRIGENDUM 1
  • BS EN 62305-2:2006 Protection against lightning. Risk management
    CORRIGENDUM 1

BRITISH STANDARDS WITHDRAWN

  • BS 903-A52:1986 Physical testing of rubber. Determination of ageing characteristics by measurement of stress at a given elongation
    Superseded by BS ISO 6914:2008
  • BS 3134-4:1992 Metric tapered roller bearings. Specification for designation system
    Superseded by BS ISO 10317:2008
  • BS 3895:1976 Guide to the design, testing and use of packaging for the safe transport of radioactive materials
  • BS 6404-8.6:1988 Magnetic materials. Individual materials. Specification for soft magnetic metallic materials
    Superseded by BS EN 60404-8-6:2009
  • BS 6699:1992 Specification for ground granulated blastfurnace slag for use with Portland cement
    Superseded by BS EN 15167-1:2006 and BS EN 15167-2:2006
  • BS 6912 Safety of earth-moving machinery. Operator enclosure environment
    • BS 6912-22.1:1996 General and definitions
      Superseded by BS ISO 10263-1:2009
    • BS 6912-22.2:1996 Air filter test
      Superseded by BS ISO 10263-2:2009
    • BS 6912-22.3:1996 Operator enclosure pressurization test method
      Superseded by BS ISO 10263-3:2009
    • BS 6912-22.4:1996 Operator enclosure ventilation, heating and/or air-conditioning test method
      Superseded by BS ISO 10263-4:2009
    • BS 6912-22.5:1996 Windscreen defrosting system test method
      Superseded by BS ISO 10263-5:2009
    • BS 6912-22.6:1996 Determination of the effect of solar heating on the operator enclosure
      Superseded by BS ISO 10263-6:2009
  • BS 7369:1991 Specification for multi-frequency tone signalling protocol for social alarm systems
    Superseded by BS 8521:2009
  • BS 7442 Rubber or plastics covered rollers. Method of test
    • BS 7442-3.1:1998 Determination of apparent hardness (IRHD method)
      Superseded by BS ISO 7267-1:2008
    • BS 7442-3.2:1991 Determination of Shore hardness
      Superseded by BS ISO 7267-2:2008
  • BS 7780-2:1994 Specification for rotary shaft lip type seals. Vocabulary
    Superseded by BS ISO 6194-2:2009
  • BS EN 962:1997 Transportable gas cylinders. Valve protection caps and valve guards for industrial and medical gas cylinders. Design, construction and tests
    Superseded by BS EN ISO 11117:2008
  • BS EN ISO 9001:2000 (A5 Laminated) Quality management systems. Requirements
    Superseded by BS EN ISO 9001:2008 (A5 Laminated)
  • BS EN ISO 10304 Water quality. Determination of dissolved anions by liquid chromatography of ions
    • BS EN ISO 10304-1:1995 (BS 6068-2.46:1995) Determination of fluoride, chloride, nitrite, orthophosphate, bromide, nitrate and sulphate ions. Method for water with low contamination
      Superseded by BS EN ISO 10304-1:2009
    • BS EN ISO 10304-2:1997 (BS 6068-2.53:1997) Determination of bromide, chloride, nitrate, nitrite, orthophosphate and sulfate in waste water
      Superseded by BS EN ISO 10304-1:2009
  • BS EN 50357:2001 Evaluation of human exposure to electromagnetic fields from devices used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications
    Superseded by BS EN 62369-1:2009
  • BS EN 60079-10:2003 Electrical apparatus for explosive gas atmospheres. Classification of hazardous areas
    Superseded by BS EN 60079-10-1:2009
  • BS EN 60745-1:2003 Hand-held motor-operated electric tools. Safety. General requirements
    Superseded by BS EN 60745-1:2006
  • BS EN 61300-3-12:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Polarization dependence of attenuation of a single-mode fibre optic component. Matrix calculation method
    Superseded by BS EN 61300-3-2:2009
  • BS EN 62071:2001 Helical-scan compressed digital video cassette recording system using 6,35mm magnetic tape. Forum D-7
    Superseded by BS EN 62071-1:2006, BS EN 62071-2:2006 and BS EN 62071-3:2006
  • BS ISO 31-8:1992 Quantities and units. Physical chemistry and molecular physics
    Superseded by BS ISO 80000-9:2009
  • BS ISO 10658:1996 Industrial trucks operating in special conditions of stacking with load laterally displaced by powered devices. Additional stability test
    Superseded by BS ISO 22915-10:2008
  • DD ISO/TS 14798:2006 Lifts (elevators), escalators and moving walks. Risk assessment and reduction methodology
    Superseded by BS ISO 14798:2009
  • DD ISO/PAS 30000:2008 Ships and marine technology. Ship recycling management systems. Specifications for management systems for safe and environmentally sound ship recycling facilities
    Superseded by BS ISO 30000:2009
  • DD CLC/TS 50131-3:2003 Alarm systems. Intrusion systems. Control and indicating equipment
    Superseded by BS EN 50131-3:2009
  • BS IEC 61496-2:1997 Safety of machinery. Electro-sensitive protective equipment. Particular requirements for equipment using active opto-electronic protective devices (AOPDs)
    Superseded by DD CLC/TS 61496-2:2006
  • DD IEC/PAS 62396-4:2007 Process management for avionics. Atmospheric radiation effects. Guidelines for designing with high voltage aircraft electronics and potential single event effects
    Superseded by DD IEC/TS 62396-4:2008
  • DD ISO/TS 16628:2003 Tracheobronchial tubes. Recommendations for size designation and labelling
    Superseded by BS ISO 16628:2008
  • BS 3G 100-2.3.15:1978 (ISO 2657:1976) Change of temperature. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions

Published in international.