ISO PUBLICATIONS

The following ISO publications are available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

  • ISO 148-2:2008 (Edition 2) Metallic materials. Charpy pendulum impact test. Verification of testing machines

  • ISO/TR 230-8:2009 Test code for machine tools. Determination of vibration levels

  • ISO 730:2009 Agricultural wheeled tractors. Rear-mounted three-point linkage. Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4

  • ISO 863:2008 (Edition 2) Cement. Test methods. Pozzolanicity test for pozzolanic cements

  • ISO 1112:2009 (Edition 3) Horology. Functional and non-functional jewels

  • ISO 1628-1:2009 (Edition 3) Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers. General principles

  • ISO 1924-2:2008 (Edition 3) Paper and board. Determination of tensile properties. Constant rate of elongation method (20 mm/min)

  • ISO 2081:2008 (Edition 3) Metallic and other inorganic coatings. Electroplated coatings of zinc with supplementary treatments on iron or steel

  • ISO 2332:2009 (Edition 3) Agricultural tractors and machinery. Connection of implements via three-point linkage. Clearance zone around implement

  • ISO 2834-3:2008 Graphic technology. Laboratory preparation of test prints. Screen printing inks

  • ISO 3822-1:1999 Acoustics. Laboratory tests on noise emission from appliances and equipment used in water supply installations. Method of measurement AMENDMENT 1:December 2008

  • ISO 4040:2009 (Edition 5) Road vehicles. Location of hand controls, indicators and tell-tales in motor vehicles

  • ISO 4141-4:2009 (Edition 2) Road vehicles. Multi-core connecting cables. Test methods and requirements for coiled cable assemblies

  • ISO 4642 Rubber and plastics hoses, non-collapsible, for fire-fighting service

    • ISO 4642-1:2009 Semi-rigid hoses for fixed systems

    • ISO 4642-2:2009 Semi-rigid hoses (and hose assemblies) for pumps and vehicles

  • ISO 5398-2:2009 Leather. Chemical determination of chromic oxide content. Quantification by colorimetric determination

  • ISO 5630-5:2008 Paper and board. Accelerated ageing. Exposure to elevated temperature at 100°C

  • ISO 5821:2009 (Edition 2) Resistance welding. Spot welding electrode caps

  • ISO 5832-12:2007 Implants for surgery Metallic materials. Wrought cobalt-chromium-molybdenum alloy CORRIGENDUM 1:September 2008

  • ISO 6020-2:2006 Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series CORRIGENDUM 1:October 2008

  • ISO 6550-3:2009 (Edition 3) Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M10 glow-plugs

  • ISO 7299-2:2009 Diesel engines. End-mounting flanges for pumps. High-pressure supply pumps for common rail fuel injection systems

  • ISO 7547:2002 Ships and marine technology. Air-conditioning and ventilation of accommodation spaces. Design conditions and basis of calculations CORRIGENDUM 1:September 2008

  • ISO 7578:2008 (Edition 4) Road vehicles. Sheath-type glowplugs. General requirements and test methods

  • ISO 7590:2009 (Edition 5) Steel cord conveyor belts. Methods for the determination of total thickness and cover thickness

  • ISO/IEC 7816-15:2004 Identification cards. Integrated circuit cards. Cryptographic information application AMENDMENT 2:December 2008

  • ISO 7919-3:2009 (Edition 2) Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Coupled industrial machines

  • ISO 8375:2009 (Edition 2) Timber structures. Glued laminated timber. Test methods for determination of physical and mechanical properties

  • ISO/IEC 9594-2:2001 Information technology. Open Systems Interconnection. The Directory. Models CORRIGENDUM 2:December 2008

  • ISO/IEC 9834-9:2008 Information technology. Open Systems Interconnection. Procedures for the operation of OSI Registration Authorities. Registration of object identifier arcs for applications and services using tag-based identification

  • ISO 9927-1:2009 (Edition 2) Cranes. Inspection. General

  • ISO 10295-2:2009 Fire tests for building elements and components. Fire testing of service installations. Linear joint (gap) seals

  • ISO 10303-215:2004 Industrial automation systems and integration. Product data representation and exchange. Application protocol. Ship arrangement CORRIGENDUM 1:December 2008

  • ISO/TR 10771-2:2008 Hydraulic fluid power. Fatigue pressure testing of metal pressure-containing envelopes. Rating methods

  • ISO 10816 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts

    • ISO 10816-3:2009 (Edition 2) Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ

    • ISO 10816-7:2009 Rotodynamic pumps for industrial applications, including measurements on rotating shafts

  • ISO/TS 10891:2009 Freight containers. Radio frequency identification (RFID). Licence plate tag

  • ISO 11001-3:2009 (Edition 2) Agricultural wheeled tractors and implements. Three-point hitch couplers. Link coupler

  • ISO 11155-2:2009 Road vehicles. Air filters for passenger compartments. Test for gaseous filtration

  • ISO 11379:2009 (Edition 2) Textile floor coverings. Laboratory cleaning procedure using spray extraction

  • ISO 11413:2008 (Edition 2) Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

  • ISO 11414:2009 (Edition 2) Plastics pipes and fittings Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

  • ISO 11601:2008 (Edition 2) Fire fighting. Wheeled fire extinguishers. Performance and construction

  • ISO/TR 12885:2008 Nanotechnologies Health and safety practices in occupational settings relevant to nanotechnologies

  • ISO 13012 Rolling bearings Accessories for sleeve type linear ball bearings

    • ISO 13012-1:2009 Boundary dimensions and tolerances for series 1 and 3

    • ISO 13012-2:2009 Boundary dimensions and tolerances for series 5

  • ISO 13606-3:2009 Health informatics. Electronic health record communication. Reference archetypes and term lists

  • ISO/IEC 14165 Information technology. Fibre channel

    • ISO/IEC 14165-116:2005 10 Gigabit Fibre Channel (10GFC) AMENDMENT 1:January 2009

    • ISO/IEC 14165-521:2009 Fabric application interface standard (FAIS)

  • ISO/IEC 14496 Information technology. Coding of audio-visual objects

    • ISO/IEC 14496-3:2005 Audio AMENDMENT 2:CORRIGENDUM 2:December 2008, AMENDMENT 2:CORRIGENDUM 3:December 2008

    • ISO/IEC TR 14496-9:2009 (Edition 3) Reference hardware description

    • ISO/IEC 14496-12:2008 ISO base media file format CORRIGENDUM 1:December 2008

    • ISO/IEC 14496-16:2006 Animation Framework eXtension (AFX) AMENDMENT 1:CORRIGENDUM 2:December 2008

  • ISO/IEC 14762:2009 Information technology. Functional safety requirements for home and building electronic systems (HBES)

  • ISO 15086-3:2008 Hydraulic fluid power. Determination of the fluid-borne noise characteristics of components and systems. Measurement of hydraulic impedance

  • ISO/IEC 15444-12:2008 Information technology. JPEG 2000 image coding system. ISO base media file format CORRIGENDUM 1:December 2008

  • ISO 15592-3:2008 (Edition 2) Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis. Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter

  • ISO 15616-4:2008 Acceptance tests for CO2-laser beam machines for high quality welding and cutting. Machines with 2-D moving optics

  • ISO 15633:2009 Iron ores. Determination of nickel. Flame atomic absorption spectrometric method

  • ISO 15726:2009 Metallic and other inorganic coatings. Electrodeposited zinc alloys with nickel, cobalt or iron

  • ISO 15862:2009 Space systems. Launch-vehicle-to-spacecraft flight environments telemetry data processing

  • ISO 16000 Indoor air

    • ISO 16000-16:2008 Detection and enumeration of moulds. Sampling by filtration

    • ISO 16000-17:2008 Detection and enumeration of moulds. Culture based method

  • ISO 16061:2008 (Edition 2) Instrumentation for use in association with nonactive surgical implants. General requirements

  • ISO 16918-1:2009 Steel and iron. Determination of nine elements by the inductively coupled plasma mass spectroscopic method. Determination of tin, antimony, cerium, lead and bismuth

  • ISO 17484-2:2009 Plastics piping systems. Multilayer pipe systems for indoor gas installations. Code of practice

  • ISO 17572 Intelligent transport systems (ITS). Location referencing for geographic databases

    • ISO 17572-1:2008 General requirements and conceptual model

    • ISO 17572-2:2008 Pre-coded location references (pre-coded profile)

    • ISO 17572-3:2008 Dynamic location references (dynamic profile)

  • ISO/TS 17665-2:2009 Sterilization of health care products. Moist heat. Guidance on the application of ISO 17665-1

  • ISO/IEC 19796-3:2009 Information technology. Learning, education and training. Quality management, assurance and metrics. Reference methods and metrics

  • ISO 20474 Earth-moving machinery. Safety

    • ISO 20474-1:2008 General requirements

    • ISO 20474-2:2008 Requirements for tractor-dozers

    • ISO 20474-3:2008 Requirements for loaders

    • ISO 20474-4:2008 Requirements for backhoe loaders

    • ISO 20474-5:2008 Requirements for hydraulic excavators

    • ISO 20474-6:2008 Requirements for dumpers

    • ISO 20474-7:2008 Requirements for scrapers

    • ISO 20474-8:2008 Requirements for graders

    • ISO 20474-9:2008 Requirements for pipelayers

    • ISO 20474-10:2008 Requirements for trenchers

    • ISO 20474-11:2008 Requirements for earth and landfill compactors

    • ISO 20474-12:2008 Requirements for cable excavators

    • ISO 20474-13:2008 Requirements for rollers

    • ISO/TS 20474-14:2008 Information on national and regional provisions

  • ISO 20666:2008 Water quality. Determination of the chronic toxicity to Brachionus calyciflorus in 48 h

  • ISO 20775:2009 Information and documentation. Schema for holdings information

  • ISO 21307:2009 Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems

  • ISO 21439:2009 Clinical dosimetry. Beta radiation sources for brachytherapy

  • ISO 21487:2006 Small craft. Permanently installed petrol and diesel fuel tanks CORRIGENDUM 1:December 2008

  • ISO 22007 Plastics. Determination of thermal conductivity and thermal diffusivity

    • ISO 22007-2:2008 Transient plane heat source (hot disc) method

    • ISO 22007-3:2008 Temperature wave analysis method

    • ISO 22007-4:2008 Laser flash method

  • ISO 22036:2008 Soil quality. Determination of trace elements in extracts of soil by inductively coupled plasma. atomic emission spectrometry (ICP-AES)

  • ISO 22108:2008 Space systems. Non-flight items in flight hardware. Identification and control

  • ISO 22201:2009 Lifts (elevators). Design and Development of programmable electronic systems in safety related application for lifts (PESSRAL)

  • ISO 22837:2009 Vehicle probe data for wide area communications

  • ISO 22900-2:2009 Road vehicles. Modular vehicle communication interface (MVCI). Diagnostic protocol data unit application programming interface (D-PDUAPI)

  • ISO 22951:2009 Data dictionary and message sets for pre-emption and prioritization signal systems for emergency and public transport vehicles (PRESTO)

  • ISO/IEC 23000-4:2009 (Edition 2) Information technology. Multimedia application format (MPEG-A). Musical slide show application format

  • ISO 23814:2009 Cranes. Competency requirements for crane inspectors

  • ISO 24033:2009 (Edition 2) Polyethylene of raised-temperature resistance (PE-RT). Pipes. Effect of time and temperature on the expected strength

  • ISO 24393:2008 Rolling bearings. Linear motion rolling bearings. Vocabulary

  • ISO/IEC TR 24732:2009 Information technology. Programming languages, their environments and system software interfaces. Extension for the programming language C to support decimal floating-point arithmetic

  • ISO/IEC 24747:2009 Information technology. Programming languages, their environments and system software interfaces. Extensions to the C Library to support mathematical special functions

  • ISO/IEC 24767-2:2009 Information technology. Home network security. Internal security services. Secure communication protocol for middleware (SCPM)

  • ISO 25137 Plastics. Sulfone plastics moulding and extrusion materials

    • ISO 25137-1:2009 Designation system and basis for specifications

    • ISO 25137-2:2009 Preparation of test specimens and determination of properties

  • ISO 25457:2008 (CD-ROM) Petroleum, petrochemical and natural gas industries. Flare details for general refinery and petrochemical service

  • ISO 26362:2009 Access panels in market, opinion and social research. Vocabulary and service requirements

  • ISO 26423:2009 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of coating thickness by crater-grinding method

  • ISO 26602:2009 Fine ceramics (advanced ceramics, advanced technical ceramics). Silicon nitride materials for rolling bearing balls

  • ISO 26868:2009 Space data and information transfer systems. Image data compression

  • ISO 27668 Gel ink ball pens and refills

    • ISO 27668-1:2009 General use

    • ISO 27668-2:2009 Documentary use (DOC)

  • ISO/TS 27893:2009 Vacuum technology. Vacuum gauges. Evaluation of the uncertainties of results of calibrations by direct comparison with a reference gauge

  • ISO 28219:2009 Packaging. Labelling and direct product marking with linear bar code and two dimensional symbols

  • ISO/IEC 29121:2009 Information technology. Digitally recorded media for information interchange and storage. Data migration method for DVD-R, DVD-RW, DVD-RAM, +R, and +RW disks

  • ISO 30042:2008 Systems to manage terminology, knowledge and content. TermBase eXchange (TBX)

  • ISO GUIDE 30:1992 Terms and definitions used in connection with reference materials AMENDMENT 1:November 2008

Published in international.