IEC PUBLICATIONS

The following IEC publications are available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the IEC button in the search panel.

  • IEC 60068 Environmental testing

    • IEC 60068-2-14:2009 (Edition 6) Tests. Test N. Change of temperature

    • IEC 60068-2-38:2009 (Edition 2) Tests. Test Z/AD. Composite temperature/humidity cyclic test

  • IEC 60115-8:2009 (Edition 2) Fixed resistors for use in electronic equipment. Sectional specification. Fixed surface mount resistors

  • IEC 60204-1:2005 Safety of machinery. Electrical equipment of machines. General requirements AMENDMENT 1:November 2008

  • IEC 60317-16:1990 Specifications for particular types of winding wires. Polyester enamelled rectangular copper wire, class 155 AMENDMENT 2:January 2009

  • IEC 60794 Optical fibre cables

    • IEC 60794-3-10:2009 (Edition 2) Outdoor cables. Family specification for duct, directly buried and lashed aerial optical telecommunication cables

    • IEC 60794-3-20:2009 (Edition 2) Outdoor cables. Family specification for self-supporting aerial telecommunication cables

  • IEC 60851-3:2009 (Edition 3) Winding wires. Test methods. Mechanical properties

  • IEC 60947-2:2006 Low-voltage switchgear and controlgear. Circuit-breakers AMENDMENT 1:January 2009

  • IEC 60966 Radio frequency and coaxial cable assemblies

    • IEC 60966-2-3:2009 (Edition 3) Detail specification for flexible coaxial cable assemblies. Frequency range 0 MHz to 1000 MHz, IEC 61169-8 connectors

    • IEC 60966-2-4:2009 (Edition 3) Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3000 MHz, IEC 61169-2 connectors

    • IEC 60966-2-5:2009 (Edition 3) Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 1000 MHz, IEC 61169-2 connectors

    • IEC 60966-2-6:2009 (Edition 3) Detail specification for cable assemblies for radio and TV receivers. Frequency range 0 MHz to 3000 MHz, IEC 61169-24 connectors

    • IEC 60966-3-1:2009 (Edition 3) Blank detail specification for semi-flexible coaxial cable assemblies

  • IEC 61073-1:2009 (Edition 4) Fibre optic interconnecting devices and passive components. Mechanical splices and fusion splice protectors for optical fibres and cables. Generic specification

  • IEC 61196 Coaxial communication cables

    • IEC 61196-6-1:2009 Blank detail specification for CATV drop cables

    • IEC 61196-6:2009 Sectional specification for CATV drop cables

  • IEC 61300 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures

    • IEC 61300-2-2:2009 (Edition 3) Tests. Mating durability

    • IEC 61300-2-5:2009 (Edition 3) Tests. Torsion

    • IEC 61300-3-2:2009 (Edition 3) Examination and measurements. Polarization dependent loss in a single-mode fibre optic device

    • IEC 61300-3-7:2009 (Edition 2) Examination and measurements. Wavelength dependence of attenuation and return loss of single mode components

    • IEC 61300-3-34:2009 (Edition 3) Examination and measurements. Attenuation of random mated connectors

    • IEC 61300-3-43:2009 Examination and measurements. Mode transfer function measurement for fibre optic sources

  • IEC 61314-1:2009 (Edition 3) Fibre optic interconnecting devices and passive components. Fibre optic fan-outs. Generic specification

  • IEC 61439 Low-voltage switchgear and controlgear assemblies

    • IEC 61439-1:2009 General rules

    • IEC 61439-2:2009 Power switchgear and controlgear assemblies

  • IEC 61534-22:2009 Powertrack systems. Particular requirements for powertrack systems intended for on floor or under floor installation

  • IEC 61557 Electrical safety in low voltage distribution systems up to 1000 V A.C. and 1500 V D.C. Equipment for testing, measuring or monitoring of protective measures

    • IEC 61557-9:2009 (Edition 2) Equipment for insulation fault location in IT systems

    • IEC 61557-11:2009 Effectiveness of residual current monitors (RCMs) type A and type B in TT, TN and IT systems

  • IEC 61755 Fibre optic connector optical interfaces

    • IEC 61755-3-1:2006 Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule single mode fibre CORRIGENDUM 1:January 2009

    • IEC 61755-3-2:2006 Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres CORRIGENDUM 1:January 2009

    • IEC 61755-3-7:2009 Optical interface, 2,5 mm and 1,25 mm diameter cylindrical PC composite ferrule using titanium as fibre surrounding material, single mode fibre

    • IEC 61755-3-8:2009 Optical interface, 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-APC composite ferrule using titanium as fibre surrounding material, single mode fibre
  • IEC 61914:2009 Cable cleats for electrical installations

  • IEC 62007-2:2009 (Edition 2) Semiconductor optoelectronic devices for fibre optic system applications. Semiconductor optoelectronic devices for fibre optic system applications Part 2: Measuring methods

  • IEC 62059-31-1:2008 Electricity metering equipment. Dependability. Accelerated reliability testing. Elevated temperature and humidity CORRIGENDUM 1:December 2008

  • IEC 62137-1-4:2009 Surface mounting technology. Environmental and endurance test methods for surface mount solder joint. Cyclic bending test

  • IEC 62271-110:2009 (Edition 2) High-voltage switchgear and controlgear. Inductive load switching

  • IEC/TR 62296:2009 (Edition 2) Considerations of unaddressed safety aspects in the second edition of IEC 60601-1 and proposals for new requirements

  • IEC 80601-2-30:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of automated type non-invasive sphygmomanometers

  • IEC CISPR 12:2007 Vehicles, boats and internal combustion engines. Radio disturbance characteristics. Limits and methods of measurement for the protection of off-board receivers AMENDMENT 1:January 2009

  • IEC CISPR 16-1-2:2003 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Ancillary equipment. Conducted disturbances CORRIGENDUM 1:January 2009

    IEC/PAS Publications

  • IEC/PAS 62591:2009 Industrial communication networks. Fieldbus specifications. WirelessHARTâ„¢ communication network and communication profile

  • IEC/PAS 62596:2009 Electrotechnical products. Determination of restricted substances. Sampling procedure. Guidelines

  • IEC/PAS 62601:2009 Industrial communication networks. Fieldbus specifications. WIA-PA communication network and communication profile

Published in international.