BRITISH STANDARDS

The following British Standard publications are available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel. The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 7861-2:2009 Strata reinforcement support systems components used in coal mines. Specification for flexible systems for roof reinforcement
    Supersedes BS 7861-2:1997
  • BS 7965:2009 Guide to the selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
    Supersedes BS 7965:2000
  • BS 7985:2009 Code of practice for the use of rope access methods for industrial purposes
    Supersedes BS 7985:2002
  • BS 8492:2009 Telecommunications equipment and telecommunications cabling. Code of practice for fire performance and protection
  • NA to BS EN 1991-4:2006 UK National Annex to Eurocode 1. Actions on structures. Silos and tanks

BS EN Publications

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European standard.

  • BS EN ISO 105-J03:2009 Textiles. Tests for colour fastness. Calculation of colour differences
    Supersedes BS EN ISO 105-J03:1997
  • BS EN 940:2009 Safety of woodworking machines. Combined woodworking machines
    Supersedes BS EN 940:1997
  • BS EN 1264-4:2009 Water based surface embedded heating and cooling systems. Installation
    Supersedes BS EN 1264-4:2001 and BS EN 15377-2:2008
  • BS EN 2205:2009 Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa ? Rm ? 1100 MPa. Bars. De ? 40 mm
  • BS EN ISO 2560:2009 Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification
    Supersedes BS EN ISO 2560:2005
  • BS EN 2815:2009 Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Bar for machining. a or D ? 200 mm. Rm ? 965 MPa
  • BS EN 2818:2009 Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ? 200 mm. Rm ? 1070 MPa
  • BS EN 3311:2009 Aerospace series. Titanium alloy TI-P64001 (Ti-6Al-4V). Annealed. Bar for machining. D < 110 mm
  • BS EN 3469:2009 Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted. Solution treated and precipitation treated. Forgings. a or D ? 200 mm. Rm ? 1310 MPa
  • BS EN 3660-016:2009 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Grommet nut, style A, self-locking and non self-locking for EN 3645. Product standard
  • BS EN 3660-020:2009 Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, straight, unsealed, self-locking with clamp strain relief for EN 3645. Product standard
  • BS EN ISO 5667-15:2009 Water quality. Sampling. Guidance on the preservation and handling of sludge and sediment samples
    Supersedes BS 6068-6.15:1999
  • BS EN ISO 7197:2009 Neurosurgical implants. Sterile, single-use hydrocephalus shunts and components
    Supersedes BS EN ISO 7197:2006
  • BS EN ISO 7971-1:2009 Cereals. Determination of bulk density, called mass per hectolitre. Reference method
    Supersedes BS ISO 7971-1:2003
  • BS EN ISO 7971-2:2009 Cereals. Determination of bulk density, called mass per hectolitre. Method of traceability for measuring instruments through reference to the international standard instrument
  • BS EN ISO 7971-3:2009 Cereals. Determination of bulk density, called mass per hectolitre. Routine method
    Supersedes BS 4317-32:1996
  • BS EN ISO 8031:2009 Rubber and plastics hoses and hose assemblies. Determination of electrical resistance and conductivity
    Supersedes BS EN ISO 8031:1997
  • BS EN ISO 8612:2009 Ophthalmic instruments. Tonometers
    Supersedes BS EN ISO 8612:2001
  • BS EN ISO 9004:2009 Managing for the sustained success of an organization. A quality management approach
    Supersedes BS EN ISO 9004:2000
  • BS EN ISO 9241-20:2009 Ergonomics of human-system interaction. Accessibility guidelines for information/communication technology (ICT) equipment and services
  • BS EN ISO 9241-171:2008 Ergonomics of human-system interaction. Guidance on software accessibility
  • BS EN ISO 10088:2009 Small craft. Permanently installed fuel systems
    Supersedes BS EN ISO 10088:2001
  • BS EN ISO 10555-1:2009 Sterile, single-use intravascular catheters. General requirements
    Supersedes BS EN ISO 10555-1:1997
  • BS EN ISO 11102-1:2009 Reciprocating internal combustion engines. Handle starting equipment. Safety requirements and tests
    Supersedes BS EN ISO 11102-1:1997
  • BS EN 12521:2009 Furniture. Strength, durability and safety. Requirements for domestic tables
    Supersedes BS 4875-5:2009, BS 7376:2009 and DD ENV 12521:2000
  • BS EN 13061:2009 Protective clothing. Shin guards for association football players. Requirements and test methods
    Supersedes BS EN 13061:2001
  • BS EN 14865-1:2009 Railway applications. Axlebox lubricating greases. Method to test the ability to lubricate
  • BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations. Detailed functional requirements for design, materials, construction, inspection and testing
  • BS EN 15512:2009 Steel static storage systems. Adjustable pallet racking systems. Principles for structural design
  • BS EN 15777:2009 Textiles. Test methods for phthalates
  • BS EN 15782:2009 Animal feeding stuffs. Determination of nicarbazin. High-performance liquid chromatographic method
  • BS EN 15824:2009 Specifications for external renders and internal plasters based on organic binders
  • BS EN ISO 21627-1:2009 Plastics. Epoxy resins. Determination of chlorine content. Inorganic chlorine
    Supersedes BS EN ISO 21627-1:2003
  • BS EN ISO 21627-2:2009 Plastics. Epoxy resins. Determination of chlorine content. Easily saponifiable chlorine
    Supersedes BS EN ISO 21627-2:2003
  • BS EN ISO 21627-3:2009 Plastics. Epoxy resins. Determination of chlorine content. Total chlorine
    Supersedes BS EN ISO 21627-3:2003
  • BS EN ISO 23913:2009 Water quality. Determination of Chromium(VI). Method using flow analysis (FIA and CFA) and spectrometric detection
  • BS EN ISO 26782:2009 Anaesthetic and respiratory equipment. Spirometers intended for the measurement of time forced expired volumes in humans
  • BS EN 50216-9:2009 Power transformer and reactor fittings. Oil-to-water heat exchangers
  • BS EN 50513:2009 Solar wafers. Data sheet and product information for crystalline silicon wafers for solar cell manufacturing
  • BS EN 60079-0:2009 Explosive atmospheres. Equipment. General requirements
    Supersedes BS EN 60079-0:2006 and BS EN 61241-0:2006
  • BS EN 60079-10-2:2009 Explosive atmospheres. Classification of areas. Combustible dust atmospheres
    Supersedes BS EN 61241-10:2004
  • BS EN 60196:2009 IEC standard frequencies
  • BS EN 60751:2008 Industrial platinum resistance thermometers and platinum temperature sensors
    Supersedes BS EN 60751:1996
  • BS EN 60793-1-47:2009 Optical fibres. Measurement methods and test procedures. Macrobending loss
    Supersedes BS EN 60793-1-47:2007
  • BS EN 60794-3-40:2008 Optical fibre cables. Outdoor cables. Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers
  • BS EN 60794-3-50:2008 Optical fibre cables. Outdoor cables. Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes
  • BS EN 60794-3-60:2008 Optical fibre cables. Outdoor cables. Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes
  • BS EN 60987:2009 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
    Supersedes BS IEC 60987:2007
  • BS EN 61076-2-104:2008 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for circular connectors with M8 screw-locking or snap-locking
    Supersedes BS EN 61076-2-101:2003+A1:2006 which remains current
  • BS EN 61202-1:2009 Fibre optic interconnecting devices and passive components. Fibre optic isolators. Generic specification
    Supersedes BS EN 61202-1:2000
  • BS EN 61249-4-14:2009 Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
  • BS EN 61249-4-15:2009 Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
  • BS EN 61249-4-16:2009 Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
  • BS EN 61249-4-17:2009 Materials for printed boards and other interconnecting structures. Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards). Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly
  • BS EN 61298-1:2008 Process measurement and control devices. General methods and procedures for evaluating performance. General considerations
    Supersedes BS EN 61298-1:1996
  • BS EN 61298-2:2008 Process measurement and control devices. General methods and procedures for evaluating performance. Tests under reference conditions
    Supersedes BS EN 61298-2:1996
  • BS EN 61298-3:2008 Process measurement and control devices. General methods and procedures for evaluating performance. Tests for the effects of influence quantities
    Supersedes BS EN 61298-3:1998
  • BS EN 61298-4:2008 Process measurement and control devices. General methods and procedures for evaluating performance. Evaluation report content
    Supersedes BS EN 61298-4:1996
  • BS EN 61300-3-6:2009 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Examinations and measurements. Return loss
    Supersedes BS EN 61300-3-6:2003
  • BS EN 61754-15:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type LSH connector family
    Supersedes BS EN 61754-15:2001
  • BS EN 61754-24-11:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type SC-RJ connectors with protective housings based on IEC 61076-3-117
  • BS EN 61754-24-21:2009 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces. Type SC-RJ connectors with protective housings based on IEC 61076-3-106, variant 06
  • BS EN 61822:2009 Electrical installations for lighting and beaconing of aerodromes. Constant current regulators
    Supersedes BS EN 61822:2003
  • BS EN 61857-21:2009 Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for general-purpose models. Wire-wound applications
    Supersedes BS EN 61857-21:2004
  • BS EN 62007-2:2009 Semiconductor optoelectronic devices for fibre optic system applications. Measuring methods
    Supersedes BS EN 62007-2:2000
  • BS EN 62026-3:2009 Low-voltage switchgear and controlgear. Controller-device interfaces (CDIs). DeviceNet
    Supersedes BS EN 50325-2:2001
  • BS EN 62343-5-1:2009 Dynamic modules. Test methods. Dynamic gain tilt equalizer. Response time measurement
  • BS EN 62386-101:2009 Digital addressable lighting interface. General requirements. System
    Partially supersedes BS EN 60929:2006
  • BS EN 62386-102:2009 Digital addressable lighting interface. General requirements. Control gear
    Partially supersedes BS EN 60929:2006
  • BS EN 62386-201:2009 Digital addressable lighting interface. Particular requirements for control gear. Fluorescent lamps (device type 0)
    Partially supersedes BS EN 60929:2006
  • BS EN 62386-202:2009 Digital addressable lighting interface. Particular requirements for control gear. Self-contained emergency lighting (device type 1)
  • BS EN 62386-203:2009 Digital addressable lighting interface. Particular requirements for control gear. Discharge lamps (excluding fluorescent lamps) (device type 2)
  • BS EN 62386-204:2009 Digital addressable lighting interface. Particular requirements for control gear. Low voltage halogen lamps (device type 3)
  • BS EN 62386-208:2009 Digital addressable lighting interface. Particular requirements for control gear. Switching function (device type 7)
  • BS EN 62419:2009 Control technology. Rules for the designation of measuring instruments
  • BS EN 62460:2008 Temperature. Electromotive force (EMF) tables for pure-element thermocouple combinations

BS Implementations

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 1658:2009 Natural rubber (NR). Evaluation procedure
    Supersedes BS 5738:1980
  • BS ISO 2006-1:2009 Rubber latex, synthetic. Determination of mechanical stability. High-speed method
    Supersedes BS 6057-3.14:1987
  • BS ISO 2006-2:2009 Rubber latex, synthetic. Determination of mechanical stability. Moderate-speed method under load
  • BS ISO 2322:2009 Styrene-butadiene rubber (SBR). Emulsion- and solution-polymerized types. Evaluation procedures
    Supersedes BS 6995:1997
  • BS ISO 2476:2009 Butadiene rubber (BR). Solution-polymerized types. Evaluation procedures
    Supersedes BS 5047:1997
  • BS ISO 3317:2009 Assembly tools for screws and nuts. Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
  • BS ISO 3356:2009 Milk. Determination of alkaline phosphatase
  • BS ISO 3664:2009 Graphic technology and photography. Viewing conditions
    Supersedes BS ISO 3664:2000
  • BS ISO 5630-6:2009 Paper and board. Accelerated ageing. Exposure to atmospheric pollution (nitrogen dioxide)
  • BS ISO 5631-2:2008 Paper and board. Determination of colour by diffuse reflectance. Outdoor daylight conditions (D65/10º)
  • BS ISO 6145-9:2009 Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Saturation method
    Supersedes BS ISO 6145-9:2001
  • BS ISO 7718-1:2009 Aircraft. Passenger doors interface requirements for connection of passenger boarding bridge. Main deck doors
  • BS ISO 7718-2:2009 Aircraft. Passenger doors interface requirements for connection of passenger boarding bridge. Upper deck doors
  • BS ISO 8196-1:2009 Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Analytical attributes of alternative methods
  • BS ISO 8196-2:2009 Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Calibration and quality control in the dairy laboratory
  • BS ISO 8196-3:2009 Milk. Definition and evaluation of the overall accuracy of alternative methods of milk analysis. Protocol for the evaluation and validation of alternative quantitative methods of milk analysis
  • BS ISO 8902:2009 Oil of lavandin Grosso (Lavandula angustifolia Mill. x Lavandula latifolia Medik.), French type
  • BS ISO 9895:2008 Paper and board. Compressive strength. Shortspan test
    Supersedes BS 7325:1990
  • BS ISO 9924-3:2009 Rubber and rubber products. Determination of the composition of vulcanizates and uncured compounds by thermogravimetry. Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction
  • BS ISO 11073-91064:2009 Health informatics. Standard communication protocol. Computer-assisted electrocardiography
  • BS ISO 11093-5:2009 Paper and board. Testing of cores. Determination of characteristics of concentric rotation
    Supersedes BS ISO 11093-5:1994
  • BS ISO 11865:2009 Instant whole milk powder. Determination of white flecks number
    Supersedes BS 1743-21:1996
  • BS ISO 11870:2009 Milk and milk products. Determination of fat content. General guidance on the use of butyrometric methods
    Supersedes BS ISO 11870:2000
  • BS ISO 12080-1:2009 Dried skimmed milk. Determination of vitamin A content. Colorimetric method
    Supersedes BS ISO 12080-1:2000
  • BS ISO 12080-2:2009 Dried skimmed milk. Determination of vitamin A content. Method using high-performance liquid chromatography
    Supersedes BS ISO 12080-2:2000
  • BS ISO 12500-3:2009 Filters for compressed air. Test methods. Particulates
  • BS ISO 14378:2009 Milk and dried milk. Determination of iodide content. Method using high-performance liquid chromatography
    Supersedes BS ISO 14378:2000
  • BS ISO 16532-1:2008 Paper and board. Determination of grease resistance. Permeability test
  • BS ISO 17824:2009 Petroleum and natural gas industries. Downhole equipment. Sand screens
  • BS ISO/IEC 18013-3:2009 Information technology. Personal identification. ISO-compliant driving licence. Access control, authentification and integrity validation
  • BS ISO 18549-1:2009 Metallic powders. Determination of apparent density and flow rate at elevated temperatures. Determination of apparent density at elevated temperatures
  • BS ISO 18549-2:2009 Metallic powders. Determination of apparent density and flow rate at elevated temperatures. Determination of flow rate at elevated temperatures
  • BS ISO 19111-2:2009 Geographic information. Spatial referencing by coordinates. Extension for parametric values
  • BS ISO 20369:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of citrate content
  • BS ISO 20370:2009 Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products. Determination of acetate content
  • BS ISO 21461:2009 Rubber. Determination of the aromaticity of oil in vulcanized rubber compounds
    Supersedes BS ISO 21461:2006
  • BS ISO 22754:2008 Pulp and paper. Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement
  • BS ISO 23065:2009 Milk fat from enriched dairy products. Determination of omega-3 and omega-6 fatty acid content by gas-liquid chromatography
  • BS ISO 23161:2009 Soil quality. Determination of selected organotin compounds. Gas-chromatographic method
  • BS ISO 23232:2009 Textiles. Aqueous liquid repellency. Water/alcohol solution resistance test
  • BS ISO 24173:2009 Microbeam analysis. Guidelines for orientation measurement using electron backscatter diffraction
  • BS ISO 24557:2009 Pulses. Determination of moisture content. Air-oven method
  • BS ISO 25217:2009 Adhesives. Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens
  • BS ISO 25720:2009 Health informatics. Genomic sequence variation markup language (GSVML)
  • BS ISO 28198:2009 Vegetable fats and oils. Determination of toluene insoluble matter
  • BS ISO 28741:2009 Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions

Corrigenda to British Standards and updated British Standards

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and corrigenda to British Standards were made available last month.

  • BS 5892-1:1992+A3:2009 Railway rolling stock materials. Specification for axles for traction and trailing stock
    AMENDMENT 3
  • BS 2573-2:1980 Rules for the design of cranes. Specification for classification, stress calculations and design of mechanisms
    CORRIGENDUM 1
  • BS 8203:2001+A1:2009 Code of practice for installation of resilient floor coverings
    AMENDMENT 1
  • BS EN 71-8:2003+A4:2009 Safety of toys. Swings, slides and similar activity toys for indoor and outdoor family domestic use
    AMENDMENT 4
  • BS EN ISO 140-14:2004 Acoustics. Measurement of sound insulation in buildings and of building elements. Guidelines for special situations in the field
    CORRIGENDUM 1
  • BS EN 196-3:2005+A1:2008 Methods of testing cement. Determination of setting times and soundness
    AMENDMENT 1
  • BS EN 379:2003+A1:2009 Personal eye-protection. Automatic welding filters
    AMENDMENT 1
  • BS EN 598:2007+A1:2009 Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Requirements and test methods
    AMENDMENT 1
  • BS EN 746-1:1997+A1:2009 Industrial thermoprocessing equipment. Common safety requirements for industrial thermoprocessing equipment
    AMENDMENT 1
  • BS EN 746-3:1997+A1:2009 Industrial thermoprocessing equipment. Safety requirements for the generation and use of atmosphere gases
    AMENDMENT 1
  • BS EN 894-2:1997+A1:2008 Safety of machinery. Ergonomics requirements for the design of displays and control actuators. Displays
    AMENDMENT 1
  • BS EN 752:2008 Drain and sewer systems outside buildings
    CORRIGENDUM 1
  • BS EN 845-1:2003+A1:2008 Specification for ancillary components for masonry. Ties, tension straps, hangers and brackets
    CORRIGENDUM 3
  • BS EN 1218-1:1999+A1:2009 Safety of woodworking machines. Tenoning machines. Single end tenoning machines with sliding table
    AMENDMENT 1
  • BS EN 1366-3:2009 Fire resistance tests for service installations. Penetration seals
    CORRIGENDUM 1
  • BS EN 1401-1:2009 Plastic piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system
    CORRIGENDUM 1
  • BS EN 1452-2:1999 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Pipes
    CORRIGENDUM 4
  • BS EN 1452-4:1999 Plastics piping systems for water supply. Unplasticized poly(vinyl chloride) (PVC-U). Valves and ancillary equipment
    CORRIGENDUM 4
  • BS EN 1547:2001+A1:2009 Industrial thermoprocessing equipment. Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
    AMENDMENT 1
  • BS EN 1756-2:2004+A1:2009 Tail lifts. Platform lifts for mounting on wheeled vehicles. Safety requirements. Tail lifts for passengers
    AMENDMENT 1
  • BS EN 1870-6:2002+A1:2009 Safety of woodworking machines. Circular sawing machines. Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading
    AMENDMENT 1
  • BS EN 1870-17:2007+A2:2009 Safety of woodworking machines. Circular sawing machines. Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws)
    AMENDMENT 2
  • BS EN 1974:1998+A1:2009 Food processing machinery. Slicing machines. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN 1994-1-1:2004 Eurocode 4. Design of composite steel and concrete structures. General rules and rules for buildings
    CORRIGENDUM 1
  • BS EN ISO 3175-3:2003 Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Procedure for testing performance when cleaning and finishing using hydrocarbon solvent
    CORRIGENDUM 1
  • BS EN 3329:2009 Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed. Sheet and strip. 0,3 mm ? a ? 2 mm. For prevailing torque nuts
    CORRIGENDUM 1
  • BS EN 4469:2007 Aerospace series. Steel FE-PM1505 (X1CrNiMoAlTi12-9-2). Vacuum induction melted and consumable electrode remelted. Solution treated and precipitation treated. Bar. a or D ? 150 mm. Rm ? 1400 MPa
    CORRIGENDUM 1
  • BS EN ISO 6709:2009 Standard representation of geographic point location by coordinates
    CORRIGENDUM 2
  • BS EN ISO 9308-1:2000 (BS 6068-4-14:2000) Water quality. Detection and enumeration of Escherichia coli and coliform bacteria. Membrane filtration method
    CORRIGENDUM 2
  • BS EN ISO 9902-4:2001+A1:2009 Textile machinery. Noise test code. Yarn processing, cordage and rope manufacturing machinery
    AMENDMENT 1
  • BS EN ISO 10321:2008 Geosynthetics. Tensile test for joints/seams by wide-width strip method
    CORRIGENDUM 1
  • BS EN ISO 10684:2004 Fasteners. Hot dip galvanized coatings
    CORRIGENDUM 1
  • BS EN ISO 11137-2:2007 Sterilization of health care products. Radiation. Establishing the sterilization dose
    CORRIGENDUM 1
  • BS EN 12041:2000+A1:2009 Food processing machinery. Moulders. Safety and hygiene requirements
    AMENDMENT 1
  • BS EN ISO 12058-1:2002 Plastics. Determination of viscosity using a falling-ball viscometer. Inclined-tube method
    CORRIGENDUM 1
  • BS EN ISO 12100-1:2003+A1:2009 Safety of machinery. Basic concepts, general principles for design. Basic terminology, methodology
    CORRIGENDUM 2
  • BS EN ISO 12100-2:2003+A1:2009 Safety of machinery. Basic concepts, general principles for design. Technical principles
    CORRIGENDUM 2
  • BS EN 12101-1:2005+A1:2006 Smoke and heat control systems. Specification for smoke barriers
    CORRIGENDUM 1
  • BS EN 12203:2003+A1:2009 Footwear, leather and imitation leather goods manufacturing machines. Shoe and leather presses. Safety requirements
    AMENDMENT 1
  • BS EN ISO 12217-1:2002+A1:2009 Small craft. Stability and buoyancy assessment and categorization. Non-sailing boats of hull length greater than or equal to 6 m
    AMENDMENT 1
  • BS EN 12312-5:2005+A1:2009 Aircraft ground support equipment. Specific requirements. Aircraft fuelling equipment
    AMENDMENT 1
  • BS EN 12312-6:2004+A1:2009 Aircraft ground support equipment. Specific requirements. Deicers and deicing/antiicing equipment
    AMENDMENT 1
  • BS EN 12312-13:2002+A1:2009 Aircraft ground support equipment. Specific requirements. Lavatory service equipment
    AMENDMENT 1
  • BS EN 12312-14:2006+A1:2009 Aircraft ground support equipment. Specific requirements. Disabled/incapacitated passenger boarding vehicles
    AMENDMENT 1
  • BS EN 12312-15:2006+A1:2009 Aircraft ground support equipment. Specific requirements. Baggage and equipment tractors
    AMENDMENT 1
  • BS EN 12312-16:2005+A1:2009 Aircraft ground support equipment. Specific requirements. Air start equipment
    AMENDMENT 1
  • BS EN 12312-17:2004+A1:2009 Aircraft ground support equipment. Specific requirements. Air conditioning equipment
    AMENDMENT 1
  • BS EN 12312-18:2005+A1:2009 Aircraft ground support equipment. Specific requirements. Nitrogen or Oxygen units
    AMENDMENT 1
  • BS EN 12312-20:2005+A1:2009 Aircraft ground support equipment. Specific requirements. Electrical ground power units
    AMENDMENT 1
  • BS EN 12321:2003+A1:2009 Underground mining machinery. Specification for the safety requirements of armoured face conveyors
    AMENDMENT 1
  • BS EN 12733:2001+A1:2009 Agricultural and forestry machinery. Pedestrian controlled motor mowers. Safety
    AMENDMENT 1
  • BS EN 12767:2007 Passive safety of support structures for road equipment. Requirements, classification and test methods
    CORRIGENDUM 2
  • BS EN 13042-2:2004+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Handling machines for feeding
    AMENDMENT 1
  • BS EN 13042-3:2007+A1:2009 Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. IS machines
    AMENDMENT 1
  • BS EN 13155:2003+A2:2009 Cranes. Safety. Non-fixed load lifting attachments
    AMENDMENT 2
  • BS EN ISO 13366-1:2008 Milk. Enumeration of somatic cells. Microscopic method (Reference method)
    CORRIGENDUM 1
  • BS EN 13707:2004+A2:2009 Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics
    AMENDMENT 2
  • BS EN 14010:2003+A1:2009 Safety of machinery. Equipment for power driven parking of motor vehicles. Safety and EMC requirements for design, manufacturing, erection and commissioning stages
    AMENDMENT 1
  • BS EN 14044:2005+A1:2009 High rise aerial appliances for fire service use. Turntable ladders with sequential movements. Safety and performance requirements and test methods
    AMENDMENT 1
  • BS EN 14420-8:2004+A1:2007 Hose fittings with clamp units. Symmetrical half coupling (Guillemin system)
    AMENDMENT 1
  • BS EN 14444:2005 Structural adhesives. Qualitative assessment of durability of bonded assemblies. Wedge rupture test
    CORRIGENDUM 1
  • BS EN 14506:2005 Devices to prevent pollution by backflow of potable water. Automatic diverter. Family H, type C
    CORRIGENDUM 1
  • BS EN 14509:2006 Self-supporting double skin metal faced insulating panels. Factory made products. Specifications
    CORRIGENDUM 1
  • BS EN 14566:2008+A1:2009 Mechanical fasteners for gypsum plasterboard systems. Definitions, requirements and test methods
    AMENDMENT 1
  • BS EN 14591-4:2007 Explosion prevention and protection in underground mines. Protective systems. Automatic extinguishing systems for road headers
    CORRIGENDUM 1
  • BS EN 14678-1:2006+A1:2009 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Dispensers
    AMENDMENT 1
  • BS EN 15034:2006 Heating boilers. Condensing heating boilers for fuel oil
    CORRIGENDUM 1
  • BS EN 15238:2006 Soil improvers and growing media. Determination of quantity for materials with particle size greater than 60 mm
    CORRIGENDUM 1
  • BS EN 15372:2008 Furniture. Strength, durability and safety. Requirements for non-domestic tables
    CORRIGENDUM 1
  • PD CEN/TR 15645-2:2008 Paper and board intended to come into contact with foodstuffs. Calibration of the off flavour test. Fatty food
    CORRIGENDUM 1
  • PD CEN/TR 15645-3:2008 Paper and board intended to come into contact with foodstuffs. Calibration of the off-flavour test. Dry food
    CORRIGENDUM 1
  • BS EN ISO 20795-1:2008 Dentistry. Base polymers. Denture base polymers
    CORRIGENDUM 1
  • BS EN ISO 26845:2008 Chemical analysis of refractories. General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES) methods
    CORRIGENDUM 1
  • BS EN 60269-1:2007+A1:2009 (BS 88-1:2007) Low-voltage fuses. General requirements
    AMENDMENT 1
  • BS EN 60335-2-15:2002+A2:2008 Household and similar electrical appliances. Safety. Particular requirements for appliances for heating liquids
    CORRIGENDUM 4
  • BS EN 60335-2-11:2003+A2:2006 Household and similar electrical appliances. Safety. Particular requirements for tumble dryers
    AMENDMENT 11
  • BS EN 60399:2004+A1:2008 Barrel thread for lampholders with shade holder ring
    AMENDMENT 1
  • BS EN 60870-5-6:2009 Telecontrol equipment and systems. Guidelines for conformance testing for the EN 60870-5 companion standards
    CORRIGENDUM 1
  • BS EN 61140:2002+A1:2006 Protection against electric shock. Common aspects for installation and equipment
    AMENDMENT 1
  • BS EN 61660-1:1997 Short-circuit currents in D.C. auxiliary installations in power plants and substations. Calculation of short-circuit currents
    CORRIGENDUM 2
  • BS EN 62429:2008 Reliability growth. Stress testing for early failures in unique complex systems
    CORRIGENDUM 1
  • BS ISO 4427-1:2007 Plastics piping systems. Polyethylene (PE) pipes and fittings for water supply. General
    CORRIGENDUM 1
  • BS ISO/IEC 9541-1:1991+A4:2009 Information technology. Font information interchange. Architecture
    AMENDMENT 4
  • BS ISO 10002:2004 Quality management. Customer satisfaction. Guidelines for complaints handling in organizations
    CORRIGENDUM 1
  • BS ISO 10110-11:1996 Optics and photonics. Preparation of drawings for optical elements and systems. Non-toleranced data
    CORRIGENDUM 1
  • BS ISO 11452-4:2005 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Bulk current injection (BCI)
    CORRIGENDUM 1
  • BS ISO 13837:2008 Road vehicles. Safety glazing materials. Method for the determination of solar transmittance
    CORRIGENDUM 1
  • BS ISO 14368-1:2000 Mineral and sapphire watch-glasses. Dimensions and tolerances
    CORRIGENDUM 1
  • BS ISO 18283:2006 Hard coal and coke. Manual sampling
    CORRIGENDUM 2
  • BS ISO 20672:2007 Ships and marine technology. Rate of turn indicators
    CORRIGENDUM 1
  • BS ISO 22702:2003+A1:2008 Utility lighters. General consumer-safety requirements
    AMENDMENT 1
  • PD ISO/TR 29901:2007 Selected illustrations of full factorial experiments with four factors
    CORRIGENDUM 1
  • BS 4A 102:2002+A1:2006 Specification for steel bolts (Unified hexagons and Unified threads) for aircraft
    CORRIGENDUM 1
  • NA to BS EN 1995-1-1:2004+A1:2008 UK National Annex to Eurocode 5. Design of timber structures. General. Common rules and rules for buildings
    AMENDMENT 1

British Standards declared obsolescent

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

  • BS 78-2:1965 Specification for cast iron spigot and socket pipes (vertically cast) and spigot and socket fittings. Fittings
    This standard has been re-declared as obsolescent as it is no longer relevant. It is partially replaced by BS 4772:1988
  • BS 585-1:1989 Wood stairs. Specification for stairs with closed risers for domestic use, including straight and winder flights and quarter or half landings
    This standard has been re-declared as obsolescent for a further period
  • BS 585-2:1985 Wood stairs. Specification for performance requirements for domestic stairs constructed of wood-based materials
    This standard has been re-declared as obsolescent for a further period
  • BS 1211:1958 Specification for centrifugally cast (spun) iron pressure pipes for water, gas and sewage
    This standard has been re-declared as obsolescent as it is no longer relevant. It is partially replaced by BS 4772:1988
  • BS 2035:1966 Specification for cast iron flanged pipes and flanged fittings
    This standard has been re-declared as obsolescent as it is no longer relevant. It is partially replaced by BS 4772:1988
  • BS 2930:1970 Specification for surgical spring trusses
    This standard has been re-declared as obsolescent as it is no longer relevant
  • BS 3271:1970 Specification for surgical elastic band trusses
    This standard has been re-declared as obsolescent as it is no longer relevant
  • BS 3923-2:1972 Methods for ultrasonic examination of welds. Automatic examination of fusion welded butt joints in ferritic steels
    This standard has been re-declared as obsolescent as it is significantly out of date and it is hoped that a future European Standard will cover this topic. The document will still be available for reference
  • BS 3929:1965 Specification for domestic solid fuel ignition pokers and portable under-grate ignition burners for use with commercial butane
    This standard has been re-declared as obsolescent as it is no longer relevant
  • BS 4622:1970 Specification for grey iron pipes and fittings
    This standard has been re-declared as obsolescent as it is no longer relevant
  • BS 4994:1987 Specification for design and construction of vessels and tanks in reinforced plastics
    This standard has been declared as obsolescent as it is replaced by BS EN 13923:2005 and BS EN 13121-3:2008. It can still be used to cover those tanks and vessels that are still in service at that time, since equipment designed, constructed and maintained to that standard is considered to have a long working life
  • BS 5061:1974 Specification for cylindrical forage tower silos and recommendations for their use
    This standard has been re-declared as obsolescent as it is no longer relevant
  • BS 5114:1975 Specification for performance requirements for joints and compression fittings for use with polyethylene pipes
    This standard has been re-declared as obsolescent as it needs to be available for reference purposes
  • BS 5254:1976 Specification for polypropylene waste pipe and fittings (external diameter 34.6 mm, 41.0 mm and 54.1 mm)
    This standard has been declared as obsolescent as the kitemark still exists to BS 5254 and products manufactured to this standard will be in service for many years to come. It will be replaced by BS EN 1451-1:2000
  • BS 5309-1:1976 Methods for sampling chemical products. Introduction and general principles
    This standard has been re-declared as obsolescent as although there is some evidence that it is still used, the technical content as a whole is now considered outdated
  • BS 5309-2:1976 Methods for sampling chemical products. Sampling of gases
    This standard has been re-declared as obsolescent as although there is some evidence that it is still used, the technical content as a whole is now considered outdated
  • BS 5309-3:1976 Methods for sampling chemical products. Sampling of liquids
    This standard has been re-declared as obsolescent as although there is some evidence that it is still used, the technical content as a whole is now considered outdated
  • BS 5309-4:1976 Methods for sampling chemical products. Sampling of solids
    This standard has been re-declared as obsolescent as although there is some evidence that it is still used, the technical content as a whole is now considered outdated
  • BS 5589:1989 Code of practice for preservation of timber
    This standard has been re-declared as obsolescent as it is no longer relevant
  • BS 5943:1980 Methods for measurement and recording for orthopaedic footwear
    This standard has been re-declared as obsolescent as it is no longer relevant
  • BS 6177:1982 Guide to selection and use of elastomeric bearings for vibration isolation of buildings
    This standard has been declared as obsolescent as it is of little interest and is not in line with current elastomeric bearing design per EN 1337-3
  • BS 7361-1:1991 Cathodic protection. Code of practice for land and marine applications
    This standard has been declared as obsolescent as it is a multi discipline document. Section 6 – Ships has not yet been replaced with a BS EN Standard. It is Partially replaced by BS EN 15112:2006 and BS EN 13636:2004
  • BS 9133:1973 Rules for the preparation of detail specifications for single turn low power rotary potentiometers of assessed quality
    This standard has been re-declared as obsolescent as it is no longer relevant
  • PD 1002:1997 A guide to cabling in private telecommunications systems
    This standard has been declared as obsolescent as it does not require revision or updating and are unable to access the original electronic document
  • BS 2G 100-2:1962 Specification for general requirements for electrical equipment and indicating instruments for aircraft. Environmental and operating conditions
    This standard has been declared as obsolescent as it is not used for new designs in industry, but is applicable to many units that are still in operation and will require continued servicing or repair into the future
  • BS 3G 100-3:1979 Specification for general requirements for equipment for use in aircraft. Characteristics of aircraft electrical power supplies
    This standard has been re-declared as obsolescent as it is no longer relevant
  • BS G 225:1979 Specification for performance of environment resistant terminal junction modules with removable crimp-type contacts
    This standard has been re-declared as obsolescent as it is no longer relevant
  • BS 2M 54:1991 Specification for temperature control in the heat treatment of metals
    This standard has been declared obsolescent as many of the manufacturers who carry out heat treatment of aerospace materials now work to AMS 2750 rather than BS 2M 54 in order to obtain NADCAP approval, which is increasingly becoming a requirement

British Standards withdrawn

  • BS 1711:1975 Specification for solid rubber flooring
    This standard has been withdrawn
  • BS 1743-21:1996 Methods for analysis of dried milk and dried milk products. Determination of white flecks number of dried whole milkSuperseded by BS ISO 11865:2009
  • BS 1772:1972 Specification for sizes of black-and-white photographic sheet film for general, professional and industrial use
    This standard has been withdrawn
  • BS 1896:1972 Specification for sizes of reprographic papers
    This standard has been withdrawn
  • BS 1915:1968 Specification for still projectors
    This standard has been withdrawn
  • BS 1917:1968 Specification for slides and film strips
    This standard has been withdrawn
  • BS 2585:1975 Specification for sizes of film for dental radiography
    This standard has been withdrawn
  • BS 2598-4:1980 Glass plant, pipeline and fittings. Specification for glass plant components
    This standard has been withdrawn as the International Standard ISO 4704:1977 has now been withdrawn
  • BS 2698:1971 Specification for containers and notes for filmstrips
    This standard has been withdrawn
  • BS 3187:1978 Specification for electrically conducting rubber flooring
    This standard has been withdrawn
  • BS 4120:1968 Methods for the measurement of performance of still projectors
    This standard has been withdrawn
  • BS 4317-32:1996 Methods of test for cereals and pulses. Determination of bulk density of cereals, called 'mass per hectolitre' (routine method)
    Superseded by BS EN ISO 7971-3:2009
  • BS 4875-5:2001 Strength and stability of furniture. Requirements for strength, durability and stability of tables and trolleys for domestic and contract use
    Superseded by BS EN 15372:2008
  • BS 4875-5:2009 Strength and stability of furniture. Requirements for strength, durability and stability of tables and trolleys for domestic use
    Superseded by BS EN 12521:2009
  • BS 5047:1997 Method for evaluation of solution-polymerized types of butadiene rubber (BR)
    Superseded by BS ISO 2476:2009
  • BS 5101-4:1980 Specification for lamp caps and holders together with gauges for the control of interchangeability and safety. Lamp caps, lampholders and gauges used in the United Kingdom but not specified in Parts 1, 2 or 3
    This standard has been withdrawn
  • BS 5128:1974 Specification for sizes of film for graphic arts use
    This standard has been withdrawn
  • BS 5268-2:2002 Structural use of timber. Code of practice for permissible stress design, materials and workmanship
    Superseded by BS EN 1995-1-1:2004+A1:2008
  • BS 5268-6.1:1996 Structural use of timber. Code of practice for timber frame walls. Dwellings not exceeding four storeys
    Superseded by BS EN 1995-1-1:2004+A1:2008
  • BS 5268-6.2:2001 Structural use of timber. Code of practice for timber frame walls. Buildings other than dwellings not exceeding four storeys
    Superseded by BS EN 1995-1-1:2004+A1:2008
  • BS 5268-7.1:1989 Structural use of timber. Recommendations for the calculation basis for span tables. Domestic floor joists
    Superseded by BS EN 1995-1-1:2004+A1:2008
  • BS 5268-7.2:1989 Structural use of timber. Recommendations for the calculation basis for span tables. Joists for flat roofs
    Superseded by BS EN 1995-1-1:2004+A1:2008
  • BS 5268-7.3:1989 Structural use of timber. Recommendations for the calculation basis for span tables. Ceiling joists
    Superseded by BS EN 1995-1-1:2004+A1:2008
  • BS 5268-7.4:1989 Structural use of timber. Ceiling binders
    Superseded by BS EN 1995-1-1:2004+A1:2008
  • BS 5268-7.5:1990 Structural use of timber. Recommendations for the calculation basis for span tables. Domestic rafters
    Superseded by BS EN 1995-1-1:2004+A1:2008
  • BS 5268-7.6:1990 Structural use of timber. Recommendations for the calculation basis for span tables. Purlins supporting rafters
    Superseded by BS EN 1995-1-1:2004+A1:2008
  • BS 5268-7.7:1990 Structural use of timber. Recommendations for the calculation basis for span tables. Purlins supporting sheeting or decking
    Superseded by BS EN 1995-1-1:2004+A1:2008
  • BS 5738:1980 Methods of test for evaluation of vulcanization characteristics for raw natural rubbers
    Superseded by BS ISO 1658:2009
  • BS 5841-3:1984 Photographic flash equipment. Specification for electronic single-flash equipment
    This standard has been withdrawn
  • BS 6057-3.14:1987 Rubber latices. Methods of test. Determination of high-speed mechanical stability of synthetic rubber lattices
    Superseded by BS ISO 2006-1:2009
  • BS 6068-6.15:1999 Water quality. Sampling. Guidance on preservation and handling of sludge and sediment samples
    Superseded by BS EN ISO 5667-15:2009
  • BS 6448:1995 Specification for gas appliance governors of DN greater than 50 and for inlet pressures up to 200 mbar
    This standard has been withdrawn as it conflicts with BS EN 88-1:2007
  • BS 6995:1997 Method for evaluation of vulcanization characteristics of styrene-butadiene rubber (SBR, YSBR) (emulsion and solution-polymerized types)
    Superseded by BS ISO 2322:2009
  • BS 7325:1990 Method for determination of the compressive strength of paper and board by the short span test
    Superseded by BS ISO 9895:2008
  • BS 7346-3:1990 Components for smoke and heat control systems. Specification for smoke curtains
    Superseded by BS EN 12101-1:2005+A1:2006
  • BS 7376:2004 Inclusion of glass in the construction of tables and trolleys. Specification
    Superseded by BS EN 15372:2008
  • BS 7376:2009 Inclusion of glass in the construction of tables and trolleys for domestic use. Specification
    Superseded by BS EN 12521:2009
  • BS EN ISO 5399:1998 Leather. Determination of water-soluble magnesium salts. EDTA titrimetric method
    This standard has been withdrawn as it is an outdated analytical procedure and it is not used by the market anymore. This has been withdrawn by both CEN and ISO
  • BS CECC 00013:1985 Harmonized system of quality assessment for electronic components: basic specification: scanning electron microscope inspection of semiconductor dice
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00017:1994 Harmonized system of quality assessment for electronic components. Basic specification: microwave common modules for use up to 20 GHz. Interfaces, fixings, connection protocol and module coding
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00104:1991 Rule of Procedure 4. CECC Working Groups. General rules and additional rules
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00109:1991 Rule of Procedure 9. Certified test records
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00111-1:1994 Rule of Procedure 11. Specifications. General regulations for CECC specifications
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00111-2:1991 Rule of Procedure 11. Specifications. Regulations for CECC Specifications for components of enhanced assessment of quality
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00111-3:1991 Rule of Procedure 11. Specifications. Regulations for CECC Specifications for components for general and professional (civil and military) usage (excluding detail specifications)
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00111-4:1991 Rule of Procedure 11. Specifications. Regulations for CECC detail specifications
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00111-5:1991 Rule of Procedure 11. Specifications. Preparation of specifications under the Single Originator Procedure
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00111-6:1994 Rule of Procedure 11. Specifications. Regulations for Process Assessment Schedules (PAS)
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00111-7:1994 Rule of Procedure 11. Specifications. Regulations for component specifications and assessment specifications
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00111-8:1994 Rule of procedure 11. Specifications. Regulations for Technology Approval Schedules (TAS)
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00112-1:1993 Rule of Procedure 12. Voting procedures. CECC Rules of Procedure and specifications (excluding ENs)
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00112-2:1994 Rule of procedure 12. Voting procedures. CECC European standards
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00114-0:1994 Rule of procedure 14. Quality assessment procedures. An introduction to the types of approval available under the CECC system
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00114-2:1995 Rule of procedure 14. Quality assessment procedures. Qualification approval of electronic components
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00114-3:1993 Rule of procedure 14. Quality assessment procedures. Capability approval of an electronic component manufacturing activity
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00114-4:1992 Rule of procedure 14. Quality assessment procedures. Procedure for enhanced assessment of quality
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00114-5:1993 Rule of procedure 14. Quality assessment procedures. Process approval of specialist contractors within the electronic components industry
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00800:1988 Harmonized system of quality assessment for electronic components. Code of practice for the use of the ppm approach in association with the CECC system
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00802:1994 Harmonized system of quality assessment for electronic components. Guidance document: CECC Standard method for the specification of surface mounting components (SMDs) of assessed quality
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 00806:1997 Harmonized system of quality assessment for electronic components. Guide to total quality management (TQM) for CECC approved organizations
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • DD ENV 12521:2000 Domestic furniture. Tables. Mechanical and structural safety requirements
    Superseded by BS EN 12521:2009
  • BS EN 15377-2:2008 Heating systems in buildings. Design of embedded water based surface heating and cooling systems. Design, dimensioning and installation
    Superseded by BS EN 1264-4:2009
  • BS EN 50144-2-3:2002 Safety of hand-held electric motor operated tools. Particular requirements for grinders, disk type sanders and polishers
    Superseded by BS EN 60745-2-3:2007
  • BS EN 50325-2:2001 Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. DeviceNet
    Superseded by BS EN 62026-3:2009
  • BS EN 55020:2002 Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement
    Superseded by BS EN 55020:2007
  • BS EN 61000-6-1:2001 Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments
    Superseded by BS EN 61000-6-1:2007
  • BS EN 61000-6-3:2001 Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments
    Superseded by BS EN 61000-6-3:2007
  • BS EN 61000-6-4:2001 Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments
    Superseded by BS EN 61000-6-4:2007
  • BS EN 61241-0:2006 Electrical apparatus for use in the presence of combustible dust. General requirements
    Superseded by BS EN 60079-0:2009
  • BS EN 61537:2002 Cable tray systems and cable ladder systems for cable management
    Superseded by BS EN 61537:2007
  • BS EN 62056-61:2002 Electricity metering. Data exchange for meter reading, tariff and load control. Object identification system (OBIS)
    Superseded by BS EN 62056-61:2007
  • BS EN 62056-62:2002 Electricity metering. Data exchange for meter reading, tariff and load control. Interface classes
    Superseded by BS EN 62056-62:2007
  • BS QC 001002-2:1997 Rules of procedure of the IEC quality assessment system for electronic components (IECQ). Documentation, including a new clause on regulations for technology approval schedules
    This standard has been withdrawn as it has been Superseded by IECQ 001002-2:1998
  • BS QC 001002-3:1997 Rules of procedure of the IEC quality assessment system for electronic components (IECQ). Approval procedures, including a new clause on technology approval
    This standard has been withdrawn as it has been Superseded by IECQ 001002-3:2005
  • BS QC 001002:1991 Rules of procedure of the IEC quality assessment system for electronic components (IECQ)
    This standard has been withdrawn as it has been Superseded by IECQ 001002-1:1998, IECQ 001002-2:1998, and IECQ 001002-3:2005
  • BS EN 100114-1:1997 Rule of Procedure 14. Quality assessment procedures. CECC requirements for the approval of an organization
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS EN 100114-6:1997 CECC Quality assessment procedure for electronic components. Technology approval of electronic component manufacturers
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 200000:1993 Harmonized system of quality assessment for electronic components. Requirements for process assessment schedules for process approval
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS CECC 210000:1995 Harmonized system of quality assessment for electronic components. Requirements for technology approval schedules (TAS)
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003
  • BS ISO 24346:2006 Resilient floor coverings. Determination of overall thickness
    This standard has been withdrawn as it conflicts with BS EN 428:1993
  • PD CLC/TR 50424:2004 Electric cables. List of residual recognized national types
    This document has been withdrawn as the European Standard CLC/TR 50424:2004 has now been withdrawn
  • BS IEC 60987:2007 Nuclear power plants. Instrumentation and control important to safety. Hardware design requirements for computer-based systems
    Superseded by BS EN 60987:2009
  • BS IEC 61292-1:1998 Fibre optics. Parameters of amplifier components
    Superseded by PD IEC/TR 61292-1:2009
  • PD 1001:1996 A guide to electromagnetic compatibility and structured cabling
    This document has been withdrawn as the current text of PD 1001 is no longer valid as the EMC Directive and the UK Statutory Instrument to which it refers have been updated
  • BS E9007:1975 Specification for harmonized system of quality assessment for electronic components: Basic specification: Sampling plans and procedures for inspection by attributes
    This standard has been withdrawn as CECC standards were withdrawn when CECC merged with IECQ in 2003

Published in international.