BRITISH STANDARDS

The following British Standard publications are available for purchase from our web site www.standards.co.nz by entering the Standard number and selecting the BSI button in the search panel. The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the 'British Standards withdrawn' section.

  • BS 2742:2009 Use of the Ringelmann and miniature smoke charts
    Supersedes BS 2742:1969
  • BS 3288-2:2009 Insulator and conductor fittings for overhead power lines. Specification for a range of insulator fittings
    Supersedes BS 3288-2:1990
  • BS 8517-1:2009 Security dogs. Code of practice for the use of general purpose security dogs
  • BS 10012:2009 Data protection. Specification for a personal information management system

BS EN PUBLICATIONS

The following are British Standard implementations of the English language versions of European Standards (ENs). The date referenced in the identifier is the date of the European standard.

  • BS EN 81-43:2009 Safety rules for the construction and installation of lifts. Special lifts for the transport of persons and goods. Lifts for cranes
  • BS EN 489:2009 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
    Supersedes BS EN 489:2003
  • BS EN 1264 Water based surface embedded heating and cooling systems
    • BS EN 1264-2:2008 Floor heating. Prove methods for the determination of the thermal output using calculation and test methods
      Supersedes BS EN 1264-2:1998
    • BS EN 1264-5:2008 Heating and cooling surfaces embedded in floors, ceilings and walls. Determination of the thermal output
  • BS EN 1634-1:2008 Fire resistance and smoke control tests for door, shutter and, openable window assemblies and elements of building hardware. Fire resistance tests for doors, shutters and openable windows
    Supersedes BS EN 1634-1:2000
  • BS EN ISO 3960:2008 Animal and vegetable fats and oils. Determination of peroxide value. Iodometric (visual) endpoint determination
    Supersedes BS 684-2.14:2001
  • BS EN 4129:2009 Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235ºC
  • BS EN 4130:2009 Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425ºC
  • BS EN 4131:2009 Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature)/425ºC
  • BS EN 4133:2009 Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in titanium alloy, aluminium IVD coated. Classification: 1100 MPa (at ambient temperature)/425ºC
  • BS EN 4134:2009 Aerospace series. Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in heat resisting nickel base alloy, aluminium IVD coated. Classification: 1250 MPa (at ambient temperature)/425ºC
  • BS EN 4640-001:2009 Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder. Technical specification
  • BS EN ISO 5360:2009 Anaesthetic vaporizers. Agent-specific filling systems
    Supersedes BS EN ISO 5360:2007
  • BS EN ISO 8835-2:2009 Inhalational anaesthesia systems. Anaesthetic breathing systems
    Supersedes BS EN ISO 8835-2:2007
  • BS EN ISO 8836:2009 Suction catheters for use in the respiratory tract
    Supersedes BS EN ISO 8836:2008
  • BS EN 9131:2009 Aerospace series. Quality management systems. Nonconformance documentation
  • BS EN ISO 9360 Anaesthetic and respiratory equipment. Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
    • BS EN ISO 9360-1:2009 HMEs for use with minimal tidal volumes of 250 ml
      Supersedes BS EN ISO 9360-1:2000
    • BS EN ISO 9360-2:2009 HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
      Supersedes BS EN ISO 9360-2:2002
  • BS EN 10244 Steel wire and wire products. Non-ferrous metallic coatings on steel wire
    • BS EN 10244-1:2009 General principles
      Supersedes BS EN 10244-1:2001
    • BS EN 10244-2:2009 Zinc or zinc alloy coatings
      Supersedes BS EN 10244-2:2001
  • BS EN ISO 10472 Safety requirements for industrial laundry machinery
    • BS EN ISO 10472-1:2008 Common requirements
      Supersedes BS EN ISO 10472-1:1998
    • BS EN ISO 10472-2:2008 Washing machines and washer-extractors
      Supersedes BS EN ISO 10472-2:1998
    • BS EN ISO 10472-3:2008 Washing tunnel lines including component machines
      Supersedes BS EN ISO 10472-3:1998
  • BS EN ISO 11197:2009 Medical supply units
    Supersedes BS EN ISO 11197:2004
  • BS EN ISO 11979-8:2009 Ophthalmic implants. Intraocular lenses. Fundamental requirements
    Supersedes BS EN ISO 11979-8:2006
  • BS EN 12002:2008 Adhesives for tiles. Determination of transverse deformation for cementitious adhesives and grouts
    Supersedes BS EN 12002:2002
  • BS EN 12003:2008 Adhesives for tiles. Determination of shear adhesion strength of reaction resin adhesives
    Supersedes BS EN 12003:1998
  • BS EN ISO 12241:2008 Thermal insulation for building equipment and industrial installations. Calculation rules
    Supersedes BS EN ISO 12241:1998
  • BS EN 12299:2009 Railway applications. Ride comfort for passengers. Measurement and evaluation
    Supersedes DD ENV 12299:1999
  • BS EN 12350 Testing fresh concrete
    • BS EN 12350-2:2009 Slump-test
      Supersedes BS EN 12350-2:2000
    • BS EN 12350-3:2009 Vebe test
      Supersedes BS EN 12350-3:2000
    • BS EN 12350-4:2009 Degree of compactability
      Supersedes BS EN 12350-4:2000
    • BS EN 12350-5:2009 Flow table test
      Supersedes BS EN 12350-5:2000
    • BS EN 12350-6:2009 Density
      Supersedes BS EN 12350-6:2000
  • BS EN 12354-5:2009 Building acoustics. Estimation of acoustic performance of building from the performance of elements. Sounds levels due to the service equipment
  • BS EN 12375:2009 Packaging. Flexible aluminium tubes. Wall thickness determination method
    Supersedes BS EN 12375:1998
  • BS EN 12390-8:2009 Testing hardened concrete. Depth of penetration of water under pressure
    Supersedes BS EN 12390-8:2000
  • BS EN 12672:2008 Chemicals used for treatment of water intended for human consumption. Potassium permanganate
    Supersedes BS EN 12672:2000
  • BS EN 12790:2009 Child use and care articles. Reclined cradles
    Supersedes BS EN 12790:2002
  • BS EN 12931:2008 Chemicals used for water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, anhydrous
    Supersedes BS EN 12931:2000
  • BS EN 12932:2008 Chemicals used for water intended for human consumption. Chemicals for emergency use. Sodium dichloroisocyanurate, dehydrate
    Supersedes BS EN 12932:2000
  • BS EN 12933:2008 Chemicals used for treatment of water intended for human consumption. Chemicals for emergency use. Trichloroisocyanuric acid
    Supersedes BS EN 12933:2000
  • BS EN 13162:2008 Thermal insulation products for buildings. Factory made mineral wool (MW) products. Specification
    Supersedes BS EN 13162:2001
  • BS EN 13163:2008 Thermal insulation products for buildings. Factory made products of expanded polystyrene (EPS). Specification
    Supersedes BS EN 13163:2001
  • BS EN 13164:2008 Thermal insulation products for buildings. Factory made products of extruded polystyrene foam (XPS). Specification
    Supersedes BS EN 13164:2001
  • BS EN 13165:2008 Thermal insulation products for buildings. Factory made rigid polyurethane foam (PUR) products. Specification
    Supersedes BS EN 13165:2001
  • BS EN 13166:2008 Thermal insulation products for buildings. Factory made products of phenolic foam (PF). Specification
    Supersedes BS EN 13166:2001
  • BS EN 13167:2008 Thermal insulation products for buildings. Factory made cellular glass (CG) products. Specification
    Supersedes BS EN 13167:2001
  • BS EN 13168:2008 Thermal insulation products for buildings. Factory made wood wool (WW) products. Specification
    Supersedes BS EN 13168:2001
  • BS EN 13169:2008 Thermal insulation products for buildings. Factory made products of expanded perlite (EPB). Specification
    Supersedes BS EN 13169:2001
  • BS EN 13170:2008 Thermal insulation products for buildings. Factory made products of expanded cork (ICB). Specification
    Supersedes BS EN 13170:2001
  • BS EN 13171:2008 Thermal insulating products for buildings. Factory made wood fibre (WF) products. Specification
    Supersedes BS EN 13171:2001
  • BS EN 13279-1:2008 Gypsum binders and gypsum plasters. Definitions and requirements
    Supersedes BS EN 13279-1:2005
  • BS EN 13888:2009 Grout for tiles. Requirements, evaluation of conformity, classification and designation
    Supersedes BS EN 13888:2002
  • BS EN ISO 13968:2008 Plastics piping and ducting systems. Thermoplastics pipes. Determination of ring flexibility
    Supersedes the dual numbered standard BS EN 1446:1996, BS 2782-11:Method 1114C:1996
  • BS EN 14908-5:2009 Open data communication in building automation, controls and building management implementation guideline. Control network protocol. Implementation
  • BS EN ISO 15193:2009 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures
    Supersedes BS EN 12286:1999
  • BS EN ISO 15194:2009 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation
    Supersedes BS EN 12287:1999
  • BS EN 15216:2007 Characterization of waste. Determination of total dissolved solids (TDS) in water and eluates
  • BS EN 15309:2007 Characterization of waste and soil. Determination of elemental composition by x-ray fluorescence
  • BS EN 15437-1:2009 Railway applications. Axlebox condition monitoring. Interface and design requirements. Track side equipment and rolling stock axlebox
  • BS EN 15559:2009 Fertilizers. Determination of nitric and ammoniacal nitrogen according to Arnd
    Supersedes DD CEN/TS 15559:2007
  • BS EN 15561:2009 Fertilizers. Determination of total nitrogen in calcium cyanamide containing nitrates
    Supersedes DD CEN/TS 15561:2007
  • BS EN 15562:2009 Fertilizers. Determination of cyanamide nitrogen
    Supersedes DD CEN/TS 15562:2007
  • BS EN 15604:2009 Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
    Supersedes DD CEN/TS 15604:2007
  • BS EN 15659:2009 Secure storage units. Classification and methods of test for resistance to fire. Light fire storage units
  • BS EN 15713:2009 Secure destruction of confidential material. Code of practice
    Supersedes BS 8470:2006
  • BS EN 15721:2009 Ethanol as a blending component for petrol. Determination of higher alcohols, methanol and volatile impurities. Gas chromatographic method
  • BS EN 15766:2009 Packaging. Flexible aluminium tubes. Test methods to determine the polymerization of the internal coating with acetone
  • BS EN 15865:2009 Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
    Supersedes BS EN ISO 10964:1997
  • BS EN 15870:2009 Adhesives. Determination of tensile strength of butt joints
    Supersedes BS EN 26922:1993
  • BS EN ISO 16061:2008 Instrumentation for use in association with nonactive surgical implants. General requirements
    Supersedes BS EN 12011:1998
  • BS EN ISO 16931:2009 Animal and vegetable fats and oils. Determination of polymerized triacylglycerols by high-performance size-exclusion chromatography (HPSEC)
    Supersedes BS EN ISO 16931:2001
  • BS EN ISO 17078-3:2009 Petroleum and natural gas industries. Drilling and production equipment. Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels
  • BS EN ISO 17226-2:2008 Leather. Chemical determination of formaldehyde content. Method using colorimetric analysis
    Partially supersedes DD CEN ISO/TS 17226:2003
  • BS EN ISO 19432:2008 Building construction machinery and equipment. Portable, hand-held internal combustion engine driven cut-off machines. Safety requirements and testing
    Supersedes BS EN ISO 19432:2006
  • BS EN ISO 20361:2009 Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy
    Supersedes BS EN 12639:2000
  • BS EN ISO 22867:2008 Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
    Supersedes BS EN ISO 22867:2006
  • BS EN ISO 24373:2009 Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification
    Supersedes BS EN 14640:2005
  • BS EN 50143:2009 Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1000 V but not exceeding 10000 V
    Supersedes BS EN 50143:1999
  • BS EN 50194-1:2009 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
    Supersedes BS EN 50194:2000
  • BS EN 60034-30:2009 Rotating electrical machines. Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
  • BS EN 60422:2006 Mineral insulating oils in electrical equipment. Supervision and maintenance guidance
    Supersedes BS 5730:2001
  • BS EN 60794 Optical fibre cables
    • BS EN 60794-3-10:2009 Outdoor cables. Family specification for duct, directly buried and lashed aerial optical telecommunication cables
      Supersedes BS EN 60794-3-10:2002
    • BS EN 60794-3-20:2009 Outdoor cables. Family specification for self-supporting aerial telecommunication cables
      Supersedes BS EN 60794-3-20:2002
  • BS EN 60904-7:2009 Photovoltaic devices. Computation of the spectral mismatch correction for measurements of photovoltaic devices
    Supersedes BS EN 60904-7:1998
  • BS EN 61000 Electromagnetic compatibility (EMC)
    • BS EN 61000-4-2:2009 Testing and measurement techniques. Electrostatic discharge immunity test
      Supersedes BS EN 61000-4-2:1995 which remains current
    • BS EN 61000-4-6:2009 Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields
      Supersedes BS EN 61000-4-6:2007 which remains current
  • BS EN 61094-2:2009 Electroacoustics. Measurement microphones. Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique
    Supersedes BS EN 61094-2:1994
  • BS EN 61095:2009 Electromechanical contactors for household and similar purposes
    Supersedes BS EN 61095:1993
  • BS EN 61249 Materials for printed boards and other interconnecting structures
    • BS EN 61249-2-36:2009 Reinforced base materials, clad and unclad. Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
    • BS EN 61249-2-38:2009 Reinforced base materials, clad and unclad. Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
  • BS EN 61280-2-9: 2009 Fibre optic communication subsystem test procedures. Digital systems. Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems
    Supersedes BS EN 61280-2-9:2002
  • BS EN 61300 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures
    • BS EN 61300-2-48:2009 Tests. Temperature-humidity cycling
      Supersedes BS EN 61300-2-48:2003
    • BS EN 61300-3-3:2009 Examinations and measurements. Active monitoring of changes in attenuation and return loss
      Supersedes BS EN 61300-3-3:2003
  • BS EN 61314-1:2009 Fibre optic interconnecting devices and passive components. Fibre optic fan-outs. Generic specification
    Supersedes BS EN 61314-1:2005
  • BS EN 61400-3:2009 Wind turbines. Design requirements for offshore wind turbines
  • BS EN 62271-109: 2009 High-voltage switchgear and controlgear. Alternating-current series capacitor by-pass switches
    Supersedes BS EN 62271-109:2006 which remains current
  • BS EN 62321:2009 Electrotechnical products. Determination of levels of six regulated substances (lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls, polybrominated diphenyl ethers)
  • BS EN 80000-14:2009 Quantities and units. Telebiometrics related to human physiology

BS ENs IMPLEMENTED BY AMENDMENT

  • BS EN ISO 4120:2007 Sensory analysis. Methodology. Triangle test
    Implementation of European Standard EN ISO 4120 by amendment to BS ISO 4120:2004.
  • BS EN ISO 4528:2009 Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelain enamelled areas of articles
    Implementation of European Standard EN ISO 4528 by amendment to BS ISO 4528:2000.
  • BS EN ISO 5801:2008 (BS 848-1:2007) Industrial fans. Performance testing using standardized airways
    Implementation of European Standard EN ISO 5801 by amendment to BS ISO 5801:2007.
  • BS EN ISO 5802:2008 (BS 848-3:2001) Industrial fans. Performance testing in situ
    Implementation of European Standard EN ISO 5802 by amendment to BS ISO 5802:2001.
  • BS EN ISO 10135:2009 Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
    Implementation of European Standard EN ISO 10135 by amendment to BS ISO 10135:2007.
  • BS EN ISO 13349:2008 (BS 848-8:1999) Industrial fans. Vocabulary and definitions of categories
    Implementation of European Standard EN ISO 13349 by amendment to BS ISO 13349:1999.
  • BS EN ISO 13350:2008 (BS 848-10:1999) Industrial fans. Performance testing of jet fans
    Implementation of European Standard EN ISO 13350 by amendment to BS ISO 13350:1999.
  • BS EN ISO 13351:2008 (BS 848-4:1997) Industrial fans. Dimensions
    Implementation of European Standard EN ISO 13351 by amendment to BS ISO 13351:1996.
  • BS EN ISO 13805:2009 Vitreous and porcelain enamels for aluminium. Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
    Implementation of European Standard EN ISO 13805 by amendment to BS ISO 13805:1999.
  • BS EN ISO 15796:2008 Gas analysis. Investigation and treatment of analytical bias
    Implementation of European Standard EN ISO 15796 by amendment to BS ISO 15796:2005.

BS IMPLEMENTATIONS

BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added. The date referenced in the identifier is the date of the international standard.

  • BS ISO 2635:2003 Aircraft. Conductors for general purpose aircraft electrical cables and aerospace applications. Dimensions and characteristics
  • BS ISO 2965:2009 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability. Determination of air permeability
    Supersedes BS 5381-4:1998
  • BS ISO 5667-11:2009 (BS 6068-6.11:2009) Water quality. Sampling. Guidance on sampling of groundwaters
    Supersedes BS 6068-6.11:1993 and the dual numbered standard BS ISO 5667-18:2001, BS 6068-6.18:2001
  • BS ISO 5832-12:2007 Implants for surgery. Metallic materials. Wrought cobalt-chromium-molybdenum alloy
    Supersedes BS 7252-12:1997
  • BS ISO 6292:2008 Powered industrial trucks and tractors. Brake performance and component strength
    Supersedes BS ISO 6292:1996
  • BS ISO 7304-2:2008 Alimentary pasta produced from durum wheat semolina. Estimation of cooking quality by sensory analysis. Routine method
  • BS ISO 7700-1:2008 Food products. Checking the performance of moisture meters in use. Moisture meters for cereals
    Supersedes BS 4317-24:1990
  • BS ISO 7714:2008 Agricultural irrigation equipment. Volumetric valves. General requirements and test methods
  • BS ISO/IEC 7811-2:2001 Identification cards. Recording technique. Magnetic stripe. Low coercivity
  • BS ISO 8178-2:2008 Reciprocating internal combustion engines. Exhaust emission measurement. Measurement of gaseous and particulate exhaust emissions under field conditions
    Supersedes BS EN ISO 8178-2:1997
  • BS ISO 8589:2007 Sensory analysis. General guidance for the design of test rooms
    Supersedes BS 7183:1989
  • BS ISO 8829-1:2009 Aerospace. Test methods for polytetraflouroethylene (PTFE) inner-tube hose assemblies. Metallic (stainless steel) braid
  • BS ISO 9416:2009 Paper. Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
  • BS ISO 11452-10:2009 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Immunity to conducted disturbances in the extended audio frequency range
  • BS ISO 11712:2009 Anaesthetic and respiratory equipment. Supralaryngeal airways and connectors
  • BS ISO 11783-7:2009 Tractors and machinery for agriculture and forestry. Serial control and communications data network. Implement messages application layer
    Supersedes BS ISO 11783-7:2002
  • BS ISO 12819:2009 Methods of evaluation of the battery life of a battery-powered watch
    Supersedes BS ISO 12819:1999
  • BS ISO 13772:2009 Forestry machinery. Portable chain-saws. Non-manually actuated chain brake performance
    Supersedes BS ISO 13772:1997
  • BS ISO 15337:2009 Ambient air. Gas phase titration. Calibration of analysers for ozone
  • BS ISO 15786:2008 Technical drawings. Simplified representation and dimensioning of holes
  • BS ISO 16000-14:2009 Indoor air. Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs). Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry
  • BS ISO 20898:2008 Industrial trucks. Electrical requirements
  • BS ISO 21628:2008 Gardening machinery. Powered material collecting systems. Safety
  • BS ISO 22938:2008 Document management. Electronic content/document management (CDM) data interchange format
  • BS ISO 23812:2009 Surface chemical analysis. Secondary-ion mass spectrometry. Method for depth calibration for silicon using multiple delta-layer reference materials
  • BS ISO 23868:2008 Document management. Monitoring and verification of information stored on 130mm optical media
  • BS ISO 25620:2008 Laminate floor coverings. Determination of long-side friction for mechanically assembled panels
  • BS ISO 26021 Road vehicles. End-of-life activation of onboard pyrotechnic devices
    • BS ISO 26021-3:2009 Tool requirements
    • BS ISO 26021-4:2009 Additional communication line with bidirectional communication
  • BS ISO 26985:2008 Resilient floor coverings. Identification of linoleum and determination of cement content and ash residue
  • BS ISO/IEC 27011:2008 Information technology. Security techniques. Information security management guidelines for telecommunications organizations based on ISO/IEC 27002
  • BS ISO 27668 Gel ink ball pens and refills
    • BS ISO 27668-1:2009 General use
    • BS ISO 27668-2:2009 Documentary use (DOC)
  • BS IEC 60768:2009 Nuclear power plants. Instrumentation important to safety. Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
  • BS IEC 60964:2009 Nuclear power plants. Control rooms. Design
  • BS IEC 61588:2008 Precision clock synchronization protocol for networked measurement and control systems
    Supersedes BS IEC 61588:2004
  • BS IEC 61772:2009 Nuclear power plants. Control rooms. Application of visual display units (VDUs)
  • BS IEC 62003:2009 Nuclear power plants. Instrumentation and control important to safety. Requirements for electromagnetic compatibility testing

CORRIGENDA AND AMENDMENTS TO BRITISH STANDARDS

Most British amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is re-issued as a new edition. All amendments to date of despatch are included within any main publication when ordered for the first time. The following amended Standards and amendments to British Standards were made available last month.

  • BS 476-6:1989+A1:2009 Fire tests on building materials and structures. Method of test for fire propagation for products
    AMENDMENT 1
  • BS 4662:2006+A1:2009 Boxes for flush mounting of electrical accessories. Requirements, test methods and dimensions
    AMENDMENT 1
  • BS 5395-2:1984 Stairs, ladders and walkways. Code of practice for the design of helical and spiral stairs
    CORRIGENDUM 3
  • BS 6700:2006+A1:2009 Design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Specification
    AMENDMENT 1
  • BS EN 378-2:2008+A1:2009 Refrigerating systems and heat pumps. Safety and environmental requirements. Design, construction, testing, marking and documentation
    AMENDMENT 1
  • BS EN 437:2003+A1:2009 Tests gases. Test pressures. Appliance categories
    AMENDMENT 1
  • BS EN 474 Earth-moving machinery. Safety
    • BS EN 474-2:2006+A1:2008 Requirements for tractor-dozers
      AMENDMENT 1
    • BS EN 474-3:2006+A1:2009 Requirements for loaders
      AMENDMENT 1
    • BS EN 474-4:2006+A1:2009 Requirements for backhoe loaders
      AMENDMENT 1
    • BS EN 474-8:2006+A1:2009 Requirements for graders
      AMENDMENT 1
    • BS EN 474-9:2006+A1:2009 Requirements for pipelayers
      AMENDMENT 1
    • BS EN 474-10:2006+A1:2009 Requirements for trenchers
      AMENDMENT 1
  • BS EN 508-2:2008 Roofing products from metal sheet. Specification for self supporting products of steel, aluminium or stainless steel sheet. Aluminium
    CORRIGENDUM 1
  • BS EN 618:2002 Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
    CORRIGENDUM 1
  • BS EN 619:2002 Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of unit loads
    CORRIGENDUM 1
  • BS EN 620:2002 Continuous handling equipment and systems. Safety and EMC requirements for fixed belt conveyors for bulk materials
    CORRIGENDUM 2
  • BS EN 693:2001+A1:2009 Machine tools. Safety. Hydraulic presses
    AMENDMENT 1
  • BS EN 792 Hand-held non-electric power tools. Safety requirements
    • BS EN 792-2:2000+A1:2008 Cutting-off and crimping power tools
      AMENDMENT 1
    • BS EN 792-9:2001+A1:2008 Die grinders
      AMENDMENT 1
    • BS EN 792-11:2000+A1:2008 Nibblers and shears
      AMENDMENT 1
    • BS EN 792-12:2000+A1:2008 Small circular, small oscillating and reciprocating saws
      AMENDMENT 1
    • BS EN 792-13:2000+A1:2008 Fastener driving tools
      AMENDMENT 1
  • BS EN 818-7:2002+A1:2008 Short link chain for lifting purposes. Safety. Fine tolerance hoist chain, Grade T (Types T, DAT and DT)
    AMENDMENT 1
  • BS EN 840-6:2004+A1:2008 Mobile waste containers. Safety and health requirements
    AMENDMENT 1
  • BS EN 845 Specification for ancillary components for masonry
    • BS EN 845-1:2003+A1:2008 Ties, tension straps, hangers and brackets
      AMENDMENT 1
    • BS EN 845-3:2003+A1:2008 Bed joint reinforcement of steel meshwork
      AMENDMENT 1
  • BS EN 996:1995+A3:2009 Piling equipment. Safety requirements
    AMENDMENT 3
  • BS EN 1018:2006 Chemicals used for treatment of water intended for human consumption. Calcium carbonate
    CORRIGENDUM 1
  • BS EN 1143-1:2005+A1:2009 Secure storage units. Requirements, classification and methods of test for resistance to burglary. Safes, ATM safes, strongroom doors and strongrooms
    AMENDMENT 1
  • BS EN 1279-5:2005+A1:2008 Glass in building. Insulating glass units. Evaluation of conformity
    AMENDMENT 1
  • BS EN 1436:2007+A1:2008 Road marking materials. Road marking performance for road users
    AMENDMENT 1
  • BS EN 1492-1:2000+A1:2008 Textile slings. Safety. Flat woven webbing slings made of man-made fibres for general purpose use
    AMENDMENT 1
  • BS EN 1591 Flanges and their joints
    • BS EN 1591-1:2001+A1:2009 Design rules for gasketed circular flange connections. Calculation method
      AMENDMENT 1
    • BS EN 1591-2:2008 Design rules for gasketed circular flange connections. Gasket parameters
      CORRIGENDUM 1
  • BS EN 1672-2:2005+A1:2009 Food processing machinery. Basic concepts. Hygiene requirements
    AMENDMENT 1
  • BS EN 1677-3:2001+A1:2008 Components for slings. Safety. Forged steel self-locking hooks. Grade 8
    AMENDMENT 1
  • BS EN 1774:1997 Zinc and zinc alloys. Alloys for foundry purposes. Ingot and liquid
    CORRIGENDUM 2
  • BS EN 1777:2004+A1:2009 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing
    AMENDMENT 1
  • BS EN 1846-2:2001+A3:2009 Firefighting and rescue service vehicles. Common requirements. Safety and performance
    AMENDMENT 3
  • BS EN 1870-1:2007+A1:2009 Safety of woodworking machines. Circular sawing machines. Circular saw benches (with and without sliding table), dimension saws and building site saws
    AMENDMENT 1
  • BS EN 1915 Aircraft ground support equipment. General requirements
    • BS EN 1915-1:2001+A1:2009 Basic safety requirements
      AMENDMENT 1
    • BS EN 1915-2:2001+A1:2009 Stability and strength requirements, calculations and test methods
      AMENDMENT 1
    • BS EN 1915-3:2004+A1:2009 Vibration measurement methods and reduction
      AMENDMENT 1
    • BS EN 1915-4:2004+A1:2009 Noise measurement methods and reduction
      AMENDMENT 1
  • BS EN 1927-2:2008 Qualitative classification of softwood round timber. Pines
    CORRIGENDUM 1
  • BS EN 1991 Eurocode 1. Actions on structures
    • BS EN 1991-1-2:2002 General actions. Actions on structures exposed to fire
      CORRIGENDUM 1
    • BS EN 1991-1-3:2003 General actions. Snow loads
      CORRIGENDUM 2
  • BS EN ISO 3927:2002 Metallic powders, excluding powders for hard metals. Determination of compressibility in uniaxial compression
    CORRIGENDUM 2
  • BS EN ISO 4120:2007 Sensory analysis. Methodology. Triangle test
    CORRIGENDUM 1
  • BS EN ISO 4528:2009 Vitreous and porcelain enamel finishes. Selection of test methods for vitreous and porcelain enamelled areas of articles
    CORRIGENDUM 1
  • BS EN ISO 5801:2008 (BS 848-1:2007) Industrial fans. Performance testing using standardized airways
    CORRIGENDUM 1
  • BS EN ISO 5802:2008 (BS 848-3:2001) Industrial fans. Performance testing in situ
    CORRIGENDUM 1
  • BS EN ISO 7218:2007 Microbiology of food and animal feeding stuffs. General requirements and guidance for microbiological examinations
    CORRIGENDUM 1
  • BS EN 10083-3:2006 Steels for quenching and tempering. Technical delivery conditions for alloy steels
    CORRIGENDUM 1
  • BS EN ISO 10135:2009 Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
    CORRIGENDUM 1
  • BS EN 12012 Plastics and rubber machines. Size reduction machines
    • BS EN 12012-1:2007+A1:2008 Safety requirements for blade granulators
      AMENDMENT 1
    • BS EN 12012-2:2001+A2:2008 Safety requirements for strand pelletisers
      AMENDMENT 2
    • BS EN 12012-3:2001+A1:2008 Safety requirements for shredders
      AMENDMENT 1
    • BS EN 12012-4:2006+A1:2008 Safety requirements for agglomerators
      AMENDMENT 1
  • BS EN 12013:2000+A1:2008 Plastics and rubber machines. Internal mixers. Safety requirements
    AMENDMENT 1
  • BS EN 12198-3:2002+A1:2008 Safety of machinery. Assessment and reduction of risks arising from radiation emitted by machinery. Reduction of radiation by attenuation or screening
    AMENDMENT 1
  • BS EN 12336:2005+A1:2008 Tunnelling machines. Shield machines, thrust boring machines, auger boring machines, lining erection equipment. Safety requirements
    AMENDMENT 1
  • BS EN 12348:2000+A1:2009 Core drilling machines on a stand. Safety
    AMENDMENT 1
  • BS EN 12393-3:2008 Foods of plant origin. Multiresidue methods for the gas chromatographic determination of pesticide residues. Determination and confirmatory tests
    CORRIGENDUM 1
  • BS EN 12547:1999+A1:2009 Centrifuges. Common safety requirements
    AMENDMENT 1
  • BS EN 12566-3:2005+A1:2009 Small wastewater treatment systems for up to 50 PT. Packaged and/or site assembled domestic wastewater treatment plants
    AMENDMENT 1
  • BS EN 12644-1:2001+A1:2008 Cranes. Information for use and testing. Instructions
    AMENDMENT 1
  • BS EN ISO 12870:2004 Ophthalmic optics. Spectacle frames. Requirements and test methods
    CORRIGENDUM 1
  • BS EN 12920:2006+A1:2008 Characterization of waste. Methodology for the determination of the leaching behaviour of waste under specified conditions
    AMENDMENT 1
  • BS EN 12921-2:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids or vapours. Safety of machines using water based cleaning liquids
    AMENDMENT 1
  • BS EN 12957:2001+A1:2009 Machine tools. Safety. Electro discharge machines
    AMENDMENT 1
  • BS EN 12981:2005+A1:2009 Coating plants. Spray booths for application of organic powder coating material. Safety requirements
    AMENDMENT 1
  • BS EN 13019:2001+A1:2008 Machines for road surface cleaning. Safety requirements
    AMENDMENT 1
  • BS EN 13021:2003+A1:2008 Winter service machines. Safety requirements
    AMENDMENT 1
  • BS EN 13103:2009 Railway applications. Wheelsets and bogies. Non-powered axles. Design method
    CORRIGENDUM 1
  • BS EN 13104:2009 Railway applications. Wheelsets and bogies. Powered axles. Design method
    CORRIGENDUM 1
  • BS EN 13329:2006+A1:2008 Laminate floor coverings. Elements with a surface layer based on aminoplastic thermosetting resins. Specifications, requirements and test methods
    AMENDMENT 1
  • BS EN ISO 13349:2008 (BS 848-8:1999) Industrial fans. Vocabulary and definitions of categories
    CORRIGENDUM 1
  • BS EN ISO 13350:2008 (BS 848-10:1999) Industrial fans. Performance testing of jet fans
    CORRIGENDUM 1
  • BS EN ISO 13351:2008 (BS 848-4:1997) Industrial fans. Dimensions
    CORRIGENDUM 1
  • BS EN 13355:2004+A1:2009 Coating plants. Combined booths. Safety requirements
    AMENDMENT 1
  • BS EN 13411 Terminations for steel wire ropes. Safety
    • BS EN 13411-2:2001+A1:2008 Splicing of eyes for wire rope slings
      AMENDMENT 1
    • BS EN 13411-3:2004+A1:2008 Ferrules and ferrule-securing
      AMENDMENT 1
    • BS EN 13411-5:2003+A1:2008 U-bolt wire rope grips
      AMENDMENT 1
  • BS EN 13414-2:2003+A2:2008 Steel wire rope slings. Safety. Specification for information for use and maintenance to be provided by the manufacturer
    AMENDMENT 2
  • BS EN 13557:2003+A2:2008 Cranes. Controls and control stations
    AMENDMENT 2
  • BS EN ISO 13805:2009 Vitreous and porcelain enamels for aluminium. Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test)
    CORRIGENDUM 1
  • BS EN 13834:2007+A1:2009 Cookware. Ovenware for use in traditional domestic ovens
    AMENDMENT 1
  • BS EN 13951:2003+A1:2008 Liquid pumps. Safety requirements. Agrifoodstuffs equipment. Design rules to ensure hygiene in use
    AMENDMENT 1
  • BS EN 13985:2003+A1:2009 Machine tools. Safety. Guillotine shears
    AMENDMENT 1
  • BS EN 14043:2005+A1:2009 High rise aerial appliances for fire service use. Turntable ladders with combined movements. Safety and performance requirements and test methods
    AMENDMENT 1
  • BS EN 14382:2005+A1:2009 Safety devices for gas pressure regulating stations and installations. Gas safety shut-off devices for inlet pressures up to 100 bar
    AMENDMENT 1
  • BS EN 14488-4:2005+A1:2008 Testing sprayed concrete. Bond strength of cores by direct tension
    AMENDMENT 1
  • BS EN 14814:2007 Adhesives for thermoplastic piping systems for fluids under pressure. Specifications
    CORRIGENDUM 1
  • BS EN 14865-2:2006+A1:2009 Railway applications. Axlebox lubricating greases. Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
    AMENDMENT 1
  • BS EN ISO 15011-4:2006+A1:2008 Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Fume data sheets
    AMENDMENT 1
  • BS EN 15027:2007+A1:2009 Transportable wall saw and wire saw equipment for job site. Safety
    AMENDMENT 1
  • BS EN 15033:2006 Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats
    CORRIGENDUM 1
  • BS EN ISO 15212 Oscillation-type density meters
    • BS EN ISO 15212-1:1999 Laboratory instruments
      CORRIGENDUM 1
    • BS EN ISO 15212-2:2002 Process instruments for homogeneous liquids
      CORRIGENDUM 2
  • BS EN 15595:2009 Railway applications. Braking. Wheel slide protection
    CORRIGENDUM 1
  • BS EN ISO 15796:2008 Gas analysis. Investigation and treatment of analytical bias
    CORRIGENDUM 1
  • BS EN ISO 21809-2:2007 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Fusion-bonded epoxy coatings
    CORRIGENDUM 1
  • BS EN 60335 Household and similar electrical appliances. Safety
    • BS EN 60335-2-5:2003+A2:2008 Particular requirements for dishwashers
      AMENDMENT 2
    • BS EN 60335-2-8:2003+A2:2008 Particular requirements for shavers, hair clippers and similar appliances
      AMENDMENT 2
  • BS EN 60669-1:2000+A2:2008 (BS 3676-1:2000) Switches for household and similar fixed electrical installations. General requirements
    AMENDMENT 2
  • BS EN 60700-1:1998+A2:2008 Thyristor valves for high-voltage direct current (HVDC) power transmission. Electrical testing
    AMENDMENT 2
  • BS EN 60810:2003+A1:2008 Lamps for road vehicles. Performance requirements
    AMENDMENT 1
  • BS EN 61058-1:2002+A2:2008 Switches for appliances. General requirements
    CORRIGENDUM 1
  • BS EN 61300-2-44:2008 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Flexing of the strain relief of fibre optic devices
    CORRIGENDUM 1
  • BS ISO 999:1996 Information and documentation. Guidelines for the content, organization and presentation of indexes
    CORRIGENDUM 1
  • BS ISO 3767-4:1993+A2:2008 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment. Symbols for operator controls and other displays. Symbols for forestry machinery
    AMENDMENT 2
  • BS ISO 7206-1:2008 Implants for surgery. Partial and total hip joint prostheses. Classification and designation of dimensions
    CORRIGENDUM 1
  • BS ISO/IEC 14443-4:2008 Identification cards. Contactless integrated circuit cards. Proximity. Transmission protocol
    CORRIGENDUM 1
  • BS ISO 15022 Securities. Scheme for messages (data field dictionary)
    • BS ISO 15022-1:1999 Data field and message design rules and guidelines
      CORRIGENDUM 1
    • BS ISO 15022-2:1999 Maintenance of the data field dictionary and catalogue of messages
      CORRIGENDUM 1
  • BS ISO 20022 Financial services. Universal Financial industry message scheme
    • BS ISO 20022-1:2004 Overall methodology and format specifications for inputs to and outputs from the ISO 20022 repository
      CORRIGENDUM 1
    • BS ISO 20022-2:2007 Roles and responsibilities of the registration bodies
      CORRIGENDUM 1
  • BS IEC 60747-1:2006 Semiconductor devices. General
    CORRIGENDUM 2

BRITISH STANDARD DECLARED OBSOLESCENT

Declaration of obsolescence indicates that the standard is not recommended for use in new equipment but needs to be retained for the servicing of existing equipment that is expected to have a long working life.

  • BS 684-2.32:1979 Methods of analysis of fats and fatty oils. Other methods. Determination of rancidity index
  • PD 6487:1979 Guide for calculating the life of ball bearings when used in contact with fire resistant hydraulic fluids

BRITISH STANDARDS WITHDRAWN

  • BS 196:1961 Specification for protected-type non-reversible plugs, socket-outlets cable-couplers and appliance-couplers with earthing contacts for single phase A.C. circuits up to 250 volts
    This standard has been withdrawn
  • BS 684 Methods of analysis of fats and fatty oils
    • BS 684-1.4:1976 Physical methods. Determination of flow and drop points
      This standard has been withdrawn as the methods used in this standard are no longer used in the UK
    • BS 684-2.9:1977 Determination of the hydroxyl value and the acetyl value
      This standard has been withdrawn as the methods used in this standard are no longer used in the UK
    • BS 684-2.11:1976 Determination of volatile acids (Reichert, Polenske and Kirschner values)
      This standard has been withdrawn as the methods used in this standard are no longer used in the UK
    • BS 684-2.14:2001 Determination of peroxide value
      Superseded by BS EN ISO 3960:2008
  • BS 4285 Microbiological examination for dairy purposes
    • BS 4285-2.1:1984 Methods of general application for enumeration of microorganisms. Enumeration of microorganisms by poured plate technique for colony count
      Superseded by BS EN ISO 7218:2007
    • BS 4285-2.3:1984 Methods of general application for enumeration of microorganisms. Enumeration of microorganisms by surface plate technique for colony count
      Superseded by BS EN ISO 7218:2007
    • BS 4285-2.6:1984 Methods of general application for enumeration of microorganisms. Enumeration of microorganisms by most probable number technique
      Superseded by BS EN ISO 7218:2007
  • BS 4317-24:1990 Methods of test for cereals and pulses. Method of checking the calibration of moisture meters for cereals
    Superseded by BS ISO 7700-1:2008
  • BS AU 50-4.7.1:1991 Tyres and wheels. Rim profiles and dimensions. Moped rims. Specification for moped rims
    This standard has been withdrawn as the international equivalent ISO 5995-2:1988 has been withdrawn
  • BS 5242-1:1987 Tubes for fluid power cylinder barrels. Specification for steel tubes with specially finished surfaces
    This standard has been withdrawn
  • BS 5381-4:1998 Methods for determination of physical properties of tobacco and tobacco products. Determination of air permeability of materials used as cigarette papers, filter plug wrap and filter joining paper
    Superseded by BS ISO 2965:2009
  • BS 5730:2001 Monitoring and maintenance guide for mineral insulating oils in electrical equipment
    Superseded by BS EN 60422:2006
  • BS 6068-6.11:1993 Water quality. Sampling. Guidance on sampling of groundwaters
    Superseded by the dual numbered standard BS ISO 5667-11:2009, BS 6068-6.11:2009
  • BS 6947:1988 Specification for acid oils and recovered fatty acid distillates
    This standard has been withdrawn
  • BS 7183:1989 Guide to design of test rooms for sensory analysis of food
    Superseded by BS ISO 8589:2007
  • BS 7207:1990 Specification for crude vegetable fats
    This standard has been withdrawn
  • BS 7252-12:1997 Metallic materials for surgical implants. Specification for wrought cobalt-chromiummolybdenum alloy
    Superseded by BS ISO 5832-12:2007
  • BS 8208-1:1985 Guide to assessment of suitability of external cavity walls for filling with thermal insulants. Existing traditional cavity construction
    This standard has been withdrawn
  • BS 8470:2006 Secure destruction of confidential material. Code of practice
    Superseded by BS EN 15713:2009
  • BS EN 1446:1996 (BS 2782-11: Method 1114C:1996) Plastics piping and ducting systems. Thermoplastics pipes. Determination of ring flexibility
    Superseded by BS EN ISO 13968:2008
  • BS EN ISO 10964:1997 Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
    Superseded by BS EN 15865:2009
  • BS EN 12011:1998 Instrumentation to be used in association with non-active surgical implants. General requirements
    Superseded by BS EN ISO 16061:2008
  • BS EN 12286:1999 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures
    Superseded by BS EN ISO 15193:2009
  • BS EN 12287:1999 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Description of reference materials
    Superseded by BS EN ISO 15194:2009
  • DD ENV 12299:1999 Railway applications. Ride comfort for passengers. Measurement and evaluation
    Superseded by BS EN 12299:2009
  • BS EN 12639:2000 Liquid pumps and pump units. Noise test code. Grade 2 and grade 3 of accuracy
    Superseded by BS EN ISO 20361:2009
  • BS EN 14640:2005 Welding consumables. Solid wires and rods for fusion welding of copper and copper alloys. Classification
    Superseded by BS EN ISO 24373:2009
  • DD 139:1986 Specification for zinc-aluminium alloy ingots and castings
    Superseded by BS EN 1774:1997 and BS EN 12844:1999
  • DD CEN/TS 15559:2007 Fertilizers. Determination of nitric and ammoniacal nitrogen according to Arnd
    Superseded by BS EN 15559:2009
  • DD CEN/TS 15561:2007 Fertilizers. Determination of total nitrogen in calcium cyanamide containing nitrates
    Superseded by BS EN 15561:2009
  • DD CEN/TS 15562:2007 Fertilizers. Determination of cyanamide nitrogen
    Superseded by BS EN 15562:2009
  • DD CEN/TS 15604:2007 Fertilizers. Determination of different forms of nitrogen in the same sample, containing nitrogen as nitric, ammoniacal, urea and cyanamide nitrogen
    Superseded by BS EN 15604:2009
  • BS EN 26922:1993 Adhesives. Determination of tensile strength of butt joints
    Superseded by BS EN 15870:2009
  • BS CECC 30302:1978 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Aluminium electrolytic capacitors with solid electrolyte
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • B S CECC 30702:1993 Specification for harmonized system for quality assessment for electronic components. Blank detail specification. Fixed capacitors of ceramic dielectric, class 2 (Assessment level P. Telecom level)
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS CECC 31100:1981 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed ceramic dielectric capacitors of barrier layer type (dielectric class 3)
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS CECC 31101:1981 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed ceramic dielectric capacitors of barrier layer type (dielectric class 3)
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS CECC 31300:1983 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed mica dielectric D.C. capacitors
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS CECC 31301:1983 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed mica dielectric D.C. capacitors
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS CECC 31400:1982 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed ceramic capacitors of dielectric class 1, for electrical shock hazard protection
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS CECC 31401:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed ceramic dielectric capacitors, dielectric class 1, for electrical shock hazard protection
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS CECC 31500:1982 Harmonized system of quality assessment of electronic components. Sectional specification. Fixed ceramic capacitors of dielectric class 2, for electrical shock hazard protection
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS CECC 31501:1988 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed ceramic capacitors of dielectric class 2 for electrical shock hazard protection
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS CECC 31600:1991 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed capacitors with paper and paper/plastics dielectrics
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS CECC 31601:1993 Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors with paper or paper/plastic dielectrics
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS EN 50194:2000 Electrical apparatus for the detection of combustible gases in domestic premises. Test methods and performance requirements
    Superseded by BS EN 50194-1:2009
  • BS EN 55016-1-3:2004 Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Ancillary equipment. Disturbance power
    Superseded by BS EN 55016-1-3:2006
  • BS EN 60068-2-21:1999 Environmental testing. Test methods. Test U. Robustness of terminations and integral mounting devices
    Superseded by BS EN 60068-2-21:2006
  • BS EN 60335-2-14:2003 Specification for safety of household and similar electrical appliances. Particular requirements for kitchen machines
    Superseded by BS EN 60335-2-14:2006
  • BS EN 61966-7-1:2002 Multimedia systems and equipment. Colour measurement and management. Colour printers. Reflective prints. RGB inputs
    Superseded by BS EN 61966-7-1:2006
  • BS EN 130900:1998 Harmonized system of quality assessment for electronic components. Sectional specification. Fixed polystyrene film dielectric metal foil D.C. capacitors
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS EN 130901:1998 Harmonized system of quality assessment for electronic components. Blank detail specification. Fixed polystyrene film dielectric metal foil D.C. capacitors. Assessment level E
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS EN 130902:1998 Harmonized system of quality assessment for electronic components. Blank detail specification. Fixed polystyrene film dielectric metal foil D.C. capacitors. Assessment level EZ
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS EN 186150:1997 Connector sets for optical fibres and cables. Type OCCA-BU
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS EN 186160:1997 Connector sets for optical fibres and cables. Type OCCA-PC
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS EN 186170:1998 Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type RCC
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS EN 186180:1996 Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type LSB
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS EN 186210:1996 Harmonized system of quality assessment for electronic components. Sectional specification. Connector sets for optical fibres and cables. Type CF08
    This standard has been withdrawn as the corresponding CENELEC standard has been withdrawn
  • BS ISO 4404:1998 Petroleum and related products. Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems
    Superseded by BS EN ISO 4404-1:2006 and BS EN ISO 4404-2:2003
  • BS ISO 5667-18:2001 (BS 6068-6.18:2001) Water quality. Sampling. Guidance on sampling of groundwater at contaminated sites
    Superseded by the dual numbered standard BS ISO 5667-11:2009, BS 6068-6.11:2009
  • BS IEC 60943:1998 Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals
    Superseded by PD IEC/TR 60943:2009
  • DD IEC/PAS 62500:2006 Process management for avionics. Guide for defining and performing highly accelerated tests in avionic systems
    Superseded by DD IEC/TS 62500:2008
  • PD CR 12401:2003 Dentistry. Guidance on the classification of dental devices and accessories
    Superseded by PD CEN/TR 12401:2009

Published in international.