ISO Publications

The following ISO publications are available for purchase from our website www.standards.co.nz by entering the Standard number and selecting the ISO button in the search panel.

  • ISO 96 Textile machinery and accessories. Rings and travellers for ring spinning and ring twisting frames
    • ISO 96-1:2009 (Edition 2) Flange rings T and SF and their travellers
    • ISO 96-2:2009 (Edition 2) HZ- and J-rings and their travellers
  • ISO 463:2006 Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges
    CORRIGENDUM 2:January 2009
  • ISO 834-8:2002 Fire resistance tests. Elements of building construction. Specific requirements for non-loadbearing vertical separating elements
    CORRIGENDUM 1:February 2009
  • ISO 1248:2006 Iron oxide pigments. Specifications and methods of test
    CORRIGENDUM 2:September 2008
  • ISO 1431-1:2004 Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing
    AMENDMENT 1:March 2009
  • ISO 1920 Testing of concrete
    • ISO 1920-8:2009 Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory
    • ISO 1920-9:2009 Determination of creep of concrete cylinders in compression
  • ISO 2941:2009 (Edition 2) Hydraulic fluid power. Filter elements. Verification of collapse/burst pressure rating
  • ISO 3961:2009 (Edition 4) Animal and vegetable fats and oils. Determination of iodine value
  • ISO 4993:2009 (Edition 2) Steel and iron castings. Radiographic inspection
  • ISO 6099:2009 (Edition 4) Fluid power systems and components. Cylinders. Identification code for mounting dimensions and mounting types
  • ISO 6145-7:2009 (Edition 2) Gas analysis. Preparation of calibration gas mixtures using dynamic volumetric methods. Thermal mass-flow controllers
  • ISO 6194 Rotary shaft lip-type seals incorporating elastomeric sealing elements
    • ISO 6194-2:2009 (Edition 2) Vocabulary
    • ISO 6194-4:2009 (Edition 3) Performance test procedures
  • ISO 7176-21:2009 (Edition 2) Wheelchairs. Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
  • ISO 7240-27:2009 Fire detection and alarm systems. Point-type fire detectors using a scattered-light, transmitted-light or ionization smoke sensor, an electrochemical-cell carbon-monoxide sensor and a heat sensor
  • ISO 7718 Aircraft. Passenger doors interface requirements for connection of passenger boarding bridge
    • ISO 7718-1:2009 Main deck doors
    • ISO 7718-2:2009 Upper deck doors
  • ISO/TS 7849 Acoustics. Determination of airborne sound power levels emitted by machinery using vibration measurement
    • ISO/TS 7849-1:2009 Survey method using a fixed radiation factor
    • ISO/TS 7849-2:2009 Engineering method including determination of the adequate radiation factor
  • ISO 8062-3:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings
    CORRIGENDUM 1:January 2009
  • ISO 8124-1:2009 (Edition 2) Safety of toys. Safety aspects related to mechanical and physical properties
  • ISO 8139:2009 (Edition 3) Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end spherical eyes
  • ISO 8140:2009 (Edition 3) Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Mounting dimensions of rod-end clevises
  • ISO 8539:2009 (Edition 2) Forged steel lifting components for use with Grade 8 chain
  • ISO 8655-7:2005 Piston-operated volumetric apparatus. Non-gravimetric methods for the assessment of equipment performance
    CORRIGENDUM 1:December 2008
  • ISO 8799:2009 (Edition 2) Surface active agents. Sulfated ethoxylated alcohols and alkylphenols. Determination of content of unsulfated matter
  • ISO 8902:2009 (Edition 3) Oil of lavandin Grosso (Lavandula angustifolia Mill. x Lavandula latifolia Medik.), French type
  • ISO 9241-920:2009 Ergonomics of human-system interaction. Guidance on tactile and haptic interactions
  • ISO/IEC 9541 Information technology. Font information interchange
    • ISO/IEC 9541-2:1991 Interchange format
      AMENDMENT 2:April 2009
    • ISO/IEC 9541-4:2009 Harmonization to Open Font Format
  • ISO/IEC 9594 Information technology. Open Systems Interconnection. The Directory
    • ISO/IEC 9594-2:2001 Models
      CORRIGENDUM 3:December 2008
    • ISO/IEC 9594-3:2001 Abstract service definition
      CORRIGENDUM 3:December 2008
    • ISO/IEC 9594-4:2005 Procedures for distributed operation
      CORRIGENDUM 1:December 2008
      CORRIGENDUM 2:December 2008
    • ISO/IEC 9594-5:2001 Protocol specifications
      CORRIGENDUM 1:December 2008
      CORRIGENDUM 1:March 2009
    • ISO/IEC 9594-6:2001 Selected attribute types
      CORRIGENDUM 1:March 2009
      CORRIGENDUM 1:December 2008
    • ISO/IEC 9594-10:2001 Use of systems management for administration of the Directory
      CORRIGENDUM 1:December 2008
  • ISO 9612:2009 (Edition 2) Acoustics. Determination of occupational noise exposure. Engineering method
  • ISO 9902 Textile machinery. Noise test code
    • ISO 9902-1:2001 Common requirements
      AMENDMENT 1:March 2009
    • ISO 9902-2:2001 Spinning preparatory and spinning machinery
      AMENDMENT 1:March 2009
    • ISO 9902-3:2001 Nonwoven machinery
      AMENDMENT 1:March 2009
    • ISO 9902-4:2001 Yarn processing, cordage and rope manufacturing machinery
      AMENDMENT 1:March 2009
    • ISO 9902-5:2001 Weaving and knitting preparatory machinery
      AMENDMENT 1:March 2009
    • ISO 9902-6:2001 Fabric manufacturing machinery
      AMENDMENT 1:March 2009
    • ISO 9902-7:2001 Dyeing and finishing machinery
      AMENDMENT 1:March 2009
  • ISO 10821:2005 Industrial sewing machines. Safety requirements for sewing machines, units and systems
    AMENDMENT 1:March 2009
  • ISO/TR 10989:2009 Reference materials. Guidance on, and keywords used for, RM categorization
  • ISO 11137-2:2006 Sterilization of health care products. Radiation. Establishing the sterilization dose
    CORRIGENDUM 1:February 2009
  • ISO 11649:2009 Financial services. Core banking. Structured creditor reference to remittance information
  • ISO 12819:2009 (Edition 2) Methods of evaluation of the battery life of a battery-powered watch
  • ISO/TS 12854:2009 Gaseous media fire-extinguishing systems. Physical properties and system design. Scaling factors for Class B fuels other than heptane
  • ISO/TR 13154:2009 Medical electrical equipment. Deployment, implementation and operational guidelines for indentifying febrile humans using a screening thermograph
  • ISO 13473-5:2009 Characterization of pavement texture by use of surface profiles. Determination of megatexture
  • ISO/TS 13530:2009 Water quality. Guidance on analytical quality control for chemical and physicochemical water analysis
  • ISO 13849-1:2006 Safety of machinery. Safety-related parts of control systems. General principles for design
    CORRIGENDUM 1:February 2009
  • ISO 14242-3:2009 Implants for surgery. Wear of total hip-joint prostheses. Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
  • ISO/IEC 14496-11:2005 Information technology. Coding of audio-visual objects. Scene description and application engine
    AMENDMENT 6:March 2009
  • ISO 14594:2003 Microbeam analysis. Electron probe microanalysis. Guidelines for the determination of experimental parameters for wavelength dispersive spectroscopy
    CORRIGENDUM 1:February 2009
  • ISO 15371:2009 (Edition 2) Ships and marine technology. Fire-extinguishing systems for protection of galley cooking equipment
  • ISO 15754:2009 Paper and board. Determination of z-directional tensile strength
  • ISO 15835 Steels for the reinforcement of concrete. Reinforcement couplers for mechanical splices for bars
    • ISO 15835-1:2009 Requirements
    • ISO 15835-2:2009 Test methods
  • ISO 15927-3:2009 Hygrothermal performance of buildings. Calculation and presentation of climatic data. Calculation of a driving rain index for vertical surfaces from hourly wind and rain data
  • ISO 16265:2009 Water quality. Determination of the methylene blue active substances (MBAS) index. Method using continuous flow analysis (CFA)
  • ISO/TS 16610 Geometrical product specifications (GPS). Filtration
    • ISO/TS 16610-30:2009 Robust profile filters. Basic concepts
    • ISO/TS 16610-32:2009 Robust profile filters. Spline filters
  • ISO 16840-4:2009 Wheelchair seating. Seating systems for use in motor vehicles
  • ISO 17735:2009 Workplace atmospheres. Determination of total isocyanate groups in air using 1-(9-anthracenylmethyl) piperazine (MAP) reagent and liquid chromatography
  • ISO/IEC 18004:2006 Information technology. Automatic identification and data capture techniques. QR Code 2005 bar code symbology specification
    CORRIGENDUM 1:March 2009
  • ISO/IEC 18013-3:2009 Information technology. Personal identification. ISO-compliant driving licence. Access control, authentication and integrity validation
  • ISO 18932:2009 (Edition 2) Imaging materials. Adhesive mounting systems. Specifications
  • ISO/TS 19129:2009 Geographic information. Imagery, gridded and coverage data framework
  • ISO 20340:2009 (Edition 2) Paints and varnishes. Performance requirements for protective paint systems for offshore and related structures
  • ISO 20502:2005 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of adhesion of ceramic coatings by scratch testing
    CORRIGENDUM 1:February 2009
  • ISO 20795-1:2008 Dentistry. Base polymers. Denture base polymers
    CORRIGENDUM 1:February 2009
  • ISO 21047:2009 Information and documentation. International Standard Text Code (ISTC)
  • ISO 21809-2:2007 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Fusion-bonded epoxy coatings
    CORRIGENDUM 1:December 2008
  • ISO 22178:2009 Intelligent transport systems. Low speed following (LSF) systems. Performance requirements and test procedures
  • ISO/TS 22220:2009 Health informatics. Identification of subjects of health care
  • ISO/IEC 23000-7:2008 Information technology. Multimedia application format (MPEG-A). Open access application format
    AMENDMENT 1:April 2009
  • ISO 23606:2009 Textiles. Knitted fabrics. Representation and pattern design
  • ISO 23727:2009 Earth-moving machinery. Wheeled loader coupler for attachments
  • ISO/IEC 24708:2008 Information technology. Biometrics. BioAPI Interworking Protocol
  • ISO/IEC TR 24729-4:2009 Information technology. Radio frequency identification for item management. Implementation guidelines. Tag data security
  • ISO/IEC 24756:2009 Information technology. Framework for specifying a common access profile (CAP) of needs and capabilities of users, systems, and their environments
  • ISO/IEC 24771:2009 Information technology. Telecommunications and information exchange between systems. MAC/PHY standard for ad hoc wireless network to support QoS in an industrial work environment
  • ISO 26906:2009 Hydrometry. Fish passes at flow measurement structures
  • ISO 27956:2009 Road vehicles. Securing of cargo in delivery vans. Requirements and test methods
  • ISO 28178:2009 Graphic technology. Exchange format for colour and process control data using XML or ASCII text
  • ISO/IEC 29500:2008 (CD-ROM) Information technology. Document description and processing languages. Office Open XML File Formats
  • ISO 29822:2009 Vegetable fats and oils. Isomeric diacylglycerols. Determination of relative amounts of 1,2- and 1,3-diacylglycerols
  • ISO 29841:2009 Vegetable fats and oils. Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins)
  • ISO 30000:2009 Ships and marine technology. Ship recycling management systems. Specifications for management systems for safe and environmentally sound ship recycling facilities

Published in international.