Business and ICT - update announcements
-
Withdrawals and Proposals to Withdraw
-
24 August 2015
-
AS/NZS 4229.5:1994 Information technology - International standardized profile TAnnnn - Connection-mode transport service over connectionless-mode network service - TA1111/TA1121 profiles including subnetwork-dependent requirements for X.25 packet-switched data networks using virtual calls
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4232:1994 Information technology - Use of X.25 packet layer protocol in conjunction with X.21/X.21bis to provide the OSI connection-mode network service
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4238:1996 Information technology - Telecommunications and information exchange between systems - Private integrated services network - Circuit-mode multi-rate bearer services - Service description, functional capabilities and information flows
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4239:1996 Information technology - Telecommunications and information exchange between systems - Private integrated services network - Generic functional protocol for the support of supplementary services - Inter-exchange signalling procedures and protocol
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4244:1994 Information technology - Telecommunications and information exchange between systems - 26-pole interface connector mateability dimensions and contact number assignments
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4245:1994 Information technology - Telecommunications and information exchange between systems - Open Systems Interconnection - Transport protocol identification mechanism
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4246.1:1994 Information technology - International standardized profile FOD26 - Open document format: Enhanced document structure - Character, raster graphics and geometric graphics content architectures - Document application profile
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4247.1:1994 Information technology - International standardized profile FOD36 - Open document format: Extended document structure - Character, raster graphics and geometric graphics content architectures - Document application profile
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4248.1:1994 Information technology - International standardized profiles AOM1n OSI management - Management communications - Specification of ACSE, presentation and session protocols for the use by ROSE and CMISE
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4248.2:1994 Information technology - International standardized profiles AOM1n OSI management - Management communications - CMISE/ROSE for AOM12 - Enhanced management communications
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4248.3:1994 Information technology - International standardized profiles AOM1n OSI management - Management communications - CMISE/ROSE for AOM11 - Basic management communications
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4258:1994 Software user documentation process
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 4263:2003 Interactive voice response systems - User interface - Dual tone multi frequency (DTMF) signalling
Proposal to withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government
Feedback is sought until 22 October 2015 on the third batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz
-
-
24 August 2015
-
Withdrawals and Proposals to Withdraw
-
07 August 2015
-
AS/NZS 4197.1:1999 Information and documentation - Open Systems Interconnection - Interlibrary loan application protocol specification - Protocol specification
Superseded by AS/NZS ISO 10161.1:2015
View replacement product -
AS/NZS 4197.2:1999 Information and documentation - Open Systems Interconnection - Interlibrary loan application protocol specification - Protocol implementation conformance statement (PICS) proforma
Superseded by AS/NZS ISO 10161.2:2015
View replacement product
-
-
07 August 2015
-
Withdrawals and Proposals to Withdraw
-
13 July 2015
-
NZS 8100:2007 Dairy herd testing
Superseded by NZS 8100:2015
View replacement product
-
-
13 July 2015
-
Withdrawals and Proposals to Withdraw
-
30 June 2015
-
AS/NZS 62320.1:2010 Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - AIS base stations - Minimum operational and performance requirements, methods of testing and required test results
Superseded by AS/NZS 62320.1:2015
-
-
30 June 2015
-
Withdrawals and Proposals to Withdraw
-
23 June 2015
-
AS/NZS 2632.2:2013 Codes for the representation of names of countries and their subdivisions - Part 2: Country subdivision code
Superseded by AS/NZS 2632.2:2015
View replacement product -
AS/NZS ISO/IEC 15288:2013 Systems and software engineering - System life cycle processes
Superseded by AS/NZS ISO/IEC/IEEE 15288:2015
View replacement product
-
-
23 June 2015
-
Withdrawals and Proposals to Withdraw
-
19 June 2015
-
AS/NZS 1301.426s:1994 Methods of test for pulp and paper - Determination of thickness and apparent bulk density or apparent sheet density
Superseded by AS/NZS 1301.426s:2015
View replacement product
-
-
19 June 2015
-
Withdrawals and Proposals to Withdraw
-
04 June 2015
-
AS/NZS 2632.1:2008 Codes for the representation of names of countries and their subdivisions - Country codes
Superseded by AS/NZS 2632.1:2015
View replacement product
-
-
04 June 2015
-
Withdrawals and Proposals to Withdraw
-
03 June 2015
-
AS/NZS CISPR 16.1.2:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 1.2: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Conducted disturbances
Superseded by AS/NZS CISPR 16.1.2:2015
View replacement product -
AS/NZS CISPR 16.2.1:2012 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2.1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
Superseded by AS/NZS CISPR 16.2.1:2015
View replacement product
-
-
03 June 2015
-
Withdrawals and Proposals to Withdraw
-
29 May 2015
-
AS/NZS 1389:1997 Acidic detergents for use in the dairying industry
Proposal to Withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is now sought on the first batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz -
AS/NZS 1400:1997 Heavy-duty alkaline detergents for ‘in-place’ cleaning in dairy factories
Proposal to Withdraw
Standards Australia is reviewing approximately 1200 standards that are greater than 10 years old. The aged standards review is being carried out in conjunction with Standards New Zealand, and seeks to ensure those joint Australia and New Zealand standards managed by Standards Australia are current and continues to support trans-Tasman harmonisation where possible.
Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about all aged Joint standards (AS/NZS) that do not fall within the area of oversight of any active committee.
Aged standards, which are not referenced in Australian and/or New Zealand legislation and are not managed by any active technical committee, are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is now sought on the first batch of aged standards proposed for withdrawal, as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to joints@standards.co.nz
-
-
29 May 2015