Business and ICT - update announcements
-
Withdrawals and Proposals to Withdraw
-
19 October 2016
-
AS/NZS 1301.447s:1998 Methods of test for pulp and paper - Sheffield air permeance of paper and board
Superseded by AS/NZS 1301.447:2016
View replacement product -
AS/NZS 1301.453s:1998 Methods of test for pulp and paper - Bending resistance of paper and board - Constant rate of deflection
Superseded by AS/NZS 1301.453:2016
-
AS/NZS 1301.436:2014 Methods of test for pulp and paper - Part 436: Measurement of diffuse radiance factor
Superseded by AS/NZS 1301.510:2016
View replacement product -
AS/NZS 1301.464s:2005 Methods of test for pulp and paper - Equipment for measurement of diffuse reflectance factor
Superseded by AS/NZS 1301.510:2016
View replacement product
-
-
19 October 2016
-
Withdrawals and Proposals to Withdraw
-
29 September 2016
-
AS/NZS 3905.4:1995 Quality system guidelines - Guide to quality system Standards
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
SANZ/SAA HB 18.42:1991 Guidelines for third-party certification and accreditation - Guide 42 Guidelines for a step-by-step approach to an international certification system
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
SAA/SNZ HB18.61:1996 Guidelines for third-party certification and accreditation - Guide 61 General requirements for assessment and accreditation of certification/registration bodies
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
SANZ/SAA HB 18.7:1994 Guidelines for third-party certification and accreditation - Guide 7 Guidelines for drafting of Standards suitable for use for conformity assessment
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4447:1997 Wool - IWTO Core Test Regulations
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4492.0:2000 Wool - Fleece testing and measurement - Introduction and list of methods
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4492.1:2000 Wool - Fleece testing and measurement - Weighing and sampling greasy wool for fleece testing and measurement
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4492.2:2000 Wool - Fleece testing and measurement - Determination of washing yield and clean fleece weight
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4492.3:2000 Wool - Fleece testing and measurement - Measurement of mean fibre diameter using Airflow and Sonic A instruments
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4492.4:2000 Wool - Fleece testing and measurement - Measurement of mean fibre diameter and determination of fibre diameter distribution using SIROLAN-LASERSCAN measuring system
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4492.5:2000 Wool - Fleece testing and measurement - Measurement of mean fibre diameter using the OFDA measuring system
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4518.1:1997 Bonded abrasives - Determination and designation of grain size distribution - Macrogrits F4 to F220
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4518.2:1997 Bonded abrasives - Determination and designation of grain size distribution - Microgrits F230 to F1200
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4520:1997 Abrasive grains - Sampling and splitting
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4616:1999 Abrasive grains and crudes - Chemical analysis of silicon carbide
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS 4540:1999 Digital broadcasting systems for television, sound and data services - Framing structure, channel coding and modulation for cable systems
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS ISO/IEC 15443.1:2006 Information technology - Security techniques - A framework for IT security assurance - Overview and framework
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS ISO/IEC 18028.2:2006 Information technology - Security techniques - IT network security - Network security architecture
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS ISO/IEC 18028.3:2006 Information technology - Security techniques - IT network security - Securing communications between networks using security gateways
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS ISO/IEC 18028.4:2006 Information technology - Security techniques - IT network security - Securing remote access
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz -
AS/NZS ISO/IEC 18033.1:2006 Information technology - Security techniques - Encryption algorithms - General
Standards Australia, in conjunction with Standards New Zealand, is reviewing standards that are greater than 10 years old. The aged standards review seeks to ensure that joint Australia and New Zealand standards are current and continue to support trans-Tasman harmonisation where possible. Standards New Zealand is now seeking the views of the general public (including nominating organisations and a broader range of stakeholders) about the eighth batch of aged Joint standards (AS/NZS).
These standards are being proposed for withdrawal, unless Standards Australia or Standards New Zealand receives advice to the contrary from the public. This approach recognises the fact that while many documents within this group may well be suitable for withdrawal, some documents within this group may still be used in some way within an industry, community, or by government.
Feedback is sought until 28 November 2016 as to whether these aged standards are still useful and relevant. If they are still being used in your industry or community, then we will work to continue making these standards available.
When commenting please ensure you identify the standard, and send your comments to AgedCatalogueReview@mbie.govt.nz
-
-
29 September 2016