Business and ICT - update announcements

• Standards Published

  • 01 May 2015

    • AS/NZS 4869.3:2015 Maritime survivor locating systems (MSLS) - Part 3: Maritime survivor locating devices (MSLD) - Operating on 156.575 MHz and/or 161.975 MHz/162.025 MHz

      Provides the essential requirements for Maritime Survivor Locating Systems (MSLS) that use the digital selective calling frequency of 156.525 MHz, and also automatic identification system frequencies of 161.975 MHz and 162.025 MHz. Adopted with national modifications from RTCM 11901.1:2012.

      View product page

• Standards Published

  • 30 April 2015

    • AS/NZS 1301.206s:2015 Methods of test for pulp and paper - Part 206s: Freeness of pulp

      Prescribes the procedure to be used in measuring the freeness of pulp, which is an arbitrary measure of the drainage properties of pulp stock.
      Supersedes AS/NZS 1301.206s:2002

      View product page

    • AS/NZS 1301.418s:2015 Methods of test for pulp and paper - Part 418s: Ash content of wood, pulp, paper and board

      Specifies procedures for the determination of ash content of all types of wood, pulp, paper and board. Two procedures are included. One specifies ignition at 900°C and is applicable to all types of wood, pulp, paper and board. The other specifies ignition at 525°C and is applicable to all types of pulp, paper and board.
      Supersedes AS/NZS 1301.418s:1994

      View product page

    • AS/NZS ISO 7213:2015 Pulps - Sampling for testing

      Applies to all kinds of pulp delivered in bales or rolls, and is recommended for use when sampling for all kinds of testing purposes except for the determination of saleable mass. If the pulp is to be tested for saleable mass, in addition to other properties, the gross sample obtained according to the appropriate International Standard for sampling saleable mass may also be used for the other pulp property test. Identical to and reproduced from ISO 7213:1981.

      View product page

    • AS/NZS ISO/IEC 17067:2015 Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes

      Describes the fundamentals of product certification and provides guidelines for understanding, developing, operating or maintaining certification schemes for products, processes and services. It is intended for use by all with an interest in product certification, and especially by certification scheme owners. Identical to and reproduced from ISO/IEC 17067:2013.

      View product page

• Standards Published

  • 31 March 2015

    • NZS 8200:2015 Rainbow-inclusive workplaces: A standard for gender and sexual diversity in employment

      This voluntary standard establishes general principles for demonstrating that an organisation can be accredited as an inclusive and safe workplace for people of diverse sexual orientations and gender identities.

      View product page

• Standards Published

  • 18 March 2015

    • AS/NZS 2632.3:2015 Codes for the representation of names of countries and their subdivisions - Part 3: Code for formerly used names of countries

      Provides principles and maintenance arrangements of a code for the representation of country names removed from superseded editions of ISO 3166 series and AS/NZS 2632 series Standards. This revision is identical to and reproduced from ISO 3166-3:2013.
      Supersedes AS/NZS 2632.3:1999

      View product page

• Standards Published

  • 28 January 2015

    • AS/NZS 5121:2015 Information technology - Vocabulary - Learning, education and training

      To facilitate international communication in information technology for learning, education, and training. It presents terms and definitions of selected concepts relevant to the field of information technology for learning, education, and training and identifies relationships among the entries. Identical to and reproduced from ISO/IEC 2382-36:2013.

      View product page

• Standards Published

  • 23 January 2015

    • AS/NZS IEC 60300.1:2015 Dependability management - Part 1: Guidance for management and application

      Establishes a framework for dependability management. It provides guidance on dependability management of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. It presents guidance on planning and implementation of dependability activities and technical processes throughout the life cycle taking into account other requirements such as those relating to safety and the environment. This standard gives guidelines for management and their technical personnel to assist them to optimize dependability. This standard is not intended for the purpose of certification. Identical to and reproduced from IEC 60300-1 Ed.3.0:2014.

      View product page

    • AS/NZS IEC 62198:2015 Managing risk in projects - Application guidelines

      Provides principles and generic guidelines on managing risk and uncertainty in projects. In particular it describes a systematic approach to managing risk in projects based on ISO 31000, Risk management – Principles and guidelines. Guidance is provided on the principles for managing risk in projects, the framework and organisational requirements for implementing risk management and the process for conducting effective risk management. This standard is not intended for the purpose of certification. Identical to and reproduced from IEC 62198 Ed.2.0:2013.

      View product page

• Standards Published

  • 19 December 2014

    • AS/NZS 2312.1:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Part 1: Paint coatings

      Provides guidance for architects, engineers, builders, the surface coating industry and users of protective services in general, on paint coating systems for the protection of steel work against corrosion. The designer can choose from a selection of systems based on expected service life to first maintenance for various environments. The systems recommended herein are based on good industrial practice and usage; however, local knowledge of any corrosion problem should influence the decisions taken. In providing recommendations on up-to-date protection systems, the Committee is aware of the large number of systems used commercially, but, to avoid confusion, has included only a limited range of systems for each type of environment.
      Together with AS/NZS 2312.2:2014, this standard supersedes AS/NZS 2312:2002

      View product page

    • AS/NZS 2312.2:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings - Part 2: Hot dip galvanizing

      Clarifies the requirements for proper specification and design of hot dip galvanized articles in the atmosphere. This Standard is based on the ISO 14713 series, Zinc coatings — Guidelines and recommendations for the protection of iron and steel in structures. It completely replaces previous references in AS/NZS 2312:2002 Chapter 5 and elsewhere in that document.
      Together with AS/NZS 2312.1:2014, this standard supersedes AS/NZS 2312:2002

      View product page

• Standards Published

  • 05 December 2014

    • AS/NZS ISO 15801:2014 Document management - Information stored electronically - Recommendations for trustworthiness and reliability

      Describes the implementation and operation of document management systems that can be considered to store electronic information in a trustworthy and reliable manner. The Standard is for use by any organisation that uses a document management system to store authentic, reliable and usable/readable electronic information over time. Such systems incorporate policies, procedures, technology and audit requirements that ensure that the integrity of the electronic information is maintained during storage. Identical to, and reproduced from, ISO/TR 15801:2009.

      View product page

• Standards Published

  • 01 December 2014

    • AS/NZS IEC 62287.1:2014 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques

      Specifies the minimum operational and performance requirements, methods of testing and required test results for Class B shipborne AIS equipment using CSTDMA techniques. This standard takes into account other associated IEC International Standards and existing national standards, as applicable. Identical to and reproduced from IEC 62287-1:2013, Ed. 2.1.
      Supersedes AS/NZS IEC 62287.1:2007

      View product page

    • AS/NZS IEC 62287.2:2014 Maritime navigation and radiocommunication equipment and systems - Class B shipborne equipment of the automatic identification system (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques

      Provides specifications for a type of automatic ship identification system (AIS) equipment used on vessels that are not covered by the mandatory carriage requirement of AIS under SOLAS Chapter V. Identical to and reproduced from IEC 62287-2:2013, Ed. 1.0.

      View product page

• Standards Published

  • 12 November 2014

    • Amendment 1:2014 to AS/NZS 3080 Information technology - Generic cabling for customer premises

      Amendment applies to Appendices ZA and ZB.

      View product page

• Standards Published

  • 11 November 2014

    • AS/NZS ISO 12029:2014 Document management - Machinereadable paper forms - Optimal design for user friendliness and electronic document management systems (EDMS)

      Specifies requirements concerning the design of forms for user friendliness, with optimal machine readability for processing by electronic document management systems (EDMS). These requirements are limited to forms using roman characters. Identical to and reproduced from ISO 12029:2010.
      Supersedes AS/NZS ISO 12029:2007

      View product page

• Standards Published

  • 07 November 2014

    • AS/NZS ISO 13008:2014 Information and documentation - Digital records conversion and migration process

      Provides guidance for the conversion of records from one format to another, and the migration of records from one hardware or software configuration to another. It contains applicable records management requirements, the organisational and business framework for conducting the conversion and migration process, technology planning issues, and monitoring/ controls for the process. It also identifies the steps, components and particular methodologies for each of these processes, covering such topics as workflow, testing, version control and validation. Identical to and reproduced from ISO 13008:2012.

      View product page

• Standards Published

  • 29 October 2014

    • AS/NZS 10002:2014 Guidelines for complaint management in organizations

      Provides guidance on complaint management within an organisation, including the planning, design, operation, maintenance and improvement of the organisation’s complaint management system. Based on, but not equivalent to, ISO 10002:2004.

      View product page

• Standards Published

  • 18 September 2014

    • SA/SNZ TR ISO/IEC 24748.1:2014 Systems and software engineering - Life cycle management - Part 1: Guide for life cycle management

      Provides information on life cycle concepts and descriptions of the purposes and outcomes of representative life cycle stages. It also illustrates the use of a life cycle model for systems in the context of AS/NZS ISO/IEC 15288 and provides a corresponding illustration of the use of a life cycle model for software in the context of AS/NZS ISO/IEC 12207. SA/SNZ TR ISO/IEC 24748-1 additionally provides detailed discussion and advice on adapting a life cycle model for use in a specific project and organizational environment. Identical to and reproduced from ISO/IEC TR 24748-1:2010.

      View product page

    • SA/SNZ TR ISO/IEC 24748.2:2014 Systems and software engineering - Life cycle management - Part 2: Guide to the application of AS/NZS ISO/IEC 15288 (System life cycle processes)

      A guide for the application of AS/NZS ISO/IEC 15288. It addresses system, life cycle, process, organizational, project, and adaptation concepts, principally through reference to SA/SNZ TR ISO/IEC 24748-1 and AS/NZS ISO/IEC 15288. It then gives guidance on applying AS/NZS ISO/IEC 15288 from the aspects of strategy, planning, application in organizations, and application on projects. Identical to and reproduced from ISO/IEC TR 24748-2:2011.

      View product page

    • SA/SNZ TR ISO/IEC 24748.3:2014 Systems and software engineering - Life cycle management - Part 3: Guide to the application of AS/NZS ISO/IEC 12207 (Software life cycle processes)

      A guide for the application of AS/NZS ISO/IEC 12207. It addresses system, life cycle, process, organizational, project, and adaptation concepts, principally through reference to SA/SNZ TR ISO/IEC 24748-1 and AS/NZS ISO/IEC 12207. It gives guidance on applying AS/NZS ISO/IEC 12207 from the aspects of strategy, planning, application in organizations, and application on projects. Identical to and reproduced from ISO/IEC TR 24748-3:2011.

      View product page

• Standards Published

  • 03 September 2014

    • AS/NZS ISO/IEC 20000.3:2014 Information technology - Service management - Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1

      Provides standardization in the field of service management. In particular, it provides guidance on the scope definition, applicability and demonstration of conformity for service providers aiming to meet the requirements of ISO/IEC 20000-1. It also provides guidance for service providers that are planning service improvements and are intending to use ISO/IEC 20000. It can be used in conjunction with ISO/IEC 20000-2, which provides guidance on the application of ISO/IEC 20000-1. Identical to and reproduced from ISO/IEC 20000-3:2012.

      View product page

    • SA/SNZ TR ISO/IEC 20000.5:2014 Information technology - Service management - Part 5: Exemplar implementation plan for ISO/IEC 20000-1

      Provides guidance on how to implement a service management system (SMS) to fulfil the requirements of AS ISO/IEC 20000.1. The intended users of SA/SNZ TR ISO/IEC 20000.5 are service providers, but it can also be useful for those advising service providers on how to implement an SMS. SA/SNZ TR ISO/IEC 20000.5 includes advice for service providers on a suitable order in which to plan, implement and improve an SMS using as an example a generic three-phased approach to manage the implementation. The service provider can choose their own sequence to implement the SMS. Also included is advice on the development of a business case, the project initiation and other activities that are recommended for the implementation to be successful. Identical to, and reproduced from, ISO/IEC TR 20000-5:2013.

      View product page

    • SA/SNZ TR ISO/IEC 20000.10:2014 Information technology - Service management - Part 10: Concepts and terminology

      Provides standardisation in the field of service management, in particular guidance on the concepts and terminology of the ISO/IEC 20000 series. It establishes a common framework for helping organisations to understand the purpose of all of the parts of ISO/IEC 20000 and the relationships between the parts. Identical to, and reproduced from, ISO/IEC TR 20000-10:2013.

      View product page

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15