ISO/IEC 10021-9:1999
Information technology — Message Handling Systems (MHS): Electronic Data Interchange Messaging System — Part 9:
This Recommendation | International Standard is one of a series on message handling. The entire set provides a
comprehensive blueprint for a Message Handling System (MHS) realized by any number of cooperating open systems.
The purpose of an MHS is to enable users to exchange messages on a store-and-forward basis. A message submitted on
behalf of one user, the originator, is conveyed by the Message Transfer System (MTS) and subsequently delivered to the
agents of one or more additional users, the recipients. Access Units (AU) link the MTS to communication systems of
other kinds (e.g. postal systems). A user is assisted in the preparation, storage, and display of messages by a User
Agent (UA). Optionally, it is assisted in the storage of messages by a Message Store (MS). The MTS comprises a
number of Message Transfer Agents (MTA) which collectively perform the store-and-forward message transfer function.
This Recommendation | International Standard defines the message handling application called EDI messaging
(EDIMG), a form of message handling tailored for exchange of Electronic Data Interchange (EDI) information, a new
message content type and associated procedures known as Pedi. It is designed to meet the requirements of users of
ISO 9735 (EDIFACT), and other commonly used EDI systems.
This Recommendation | International Standard is one of a series on message handling. ITU-T Rec. X.402 |
ISO/IEC 10021-2 constitutes the introduction to the series and identifies the other documents in it.
The architectural basis and foundation for message handling are defined in still other Recommendations | International
Standards. ITU-T Rec. X.402 | ISO/IEC 10021-2 identifies those documents as well.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$403.48 NZD
|
|
| HardCopy |
$459.13 NZD
|
|
| Networkable PDF |
Price varies
|
CONTENTS
INFORMATION TECHNOLOGY - MESSAGE HANDLING SYSTEMS (MHS): ELECTRONIC DATA INTERCHANGE MESSAGING SYSTEM
1 Scope
2 References
2.1 Presentation references
2.2 Directory references
2.3 Message Handling references
2.4 Additional references
3 Definitions
3.1 Common definitions for MHS
3.2 Common definitions for abstract syntax notation one
3.3 EDI service definitions
3.4 Other EDI definitions
3.5 EDI messaging system definitions
4 Abbreviations
5 Conventions
5.1 Terms
5.2 ASN.1
5.3 Conventions for Attribute Types in Table 2
5.4 Conventions for Attribute Types in Table 4
6 Information objects
7 Common data types
7.1 EDIM Identifier
7.2 Extensions
8 EDI Messages
8.1 Heading Field Component Types
8.2 Heading Fields
8.3 Body Part Types
9 EDI Notifications
9.1 Common Fields
9.2 Positive Notifications
9.3 Negative Notifications
9.4 Forwarded Notifications
10 Primary Object Types
10.1 EDI Messaging User
10.2 EDI Messaging System
11 Primary Port Types
11.1 Origination Port
11.2 Reception Port
12 Abstract Operations
12.1 Origination Abstract Operations
12.2 Reception Abstract Operations
13 Abstract Errors
13.1 Recipient Improperly Specified
14 Other capabilities
15 Secondary Object Types
15.1 EDI User Agent
15.2 EDI Message Store
15.3 Telematic Agent
15.4 Physical Delivery Access Unit
15.5 Message Transfer System
16 Secondary Port Types
16.1 Submission Port
16.2 Delivery Port
16.3 Retrieval Port
16.4 Administration Port
16.5 Import Port
16.6 Export Port
17 User Agent Operation
17.1 Performance of Origination Operations
17.2 Invocation of Reception Operations
17.3 Internal procedures
18 Message Store operation
18.1 Binding to the MS
18.2 Abstract-bind result
18.3 Creation of Information Objects
18.4 Maintenance of Attributes
18.5 Negative Notification
18.6 MS-message-submission extensions
18.7 Auto-Action Types
18.8 Message Store Attributes
18.9 Procedures for EDI MS
19 Message Contents
19.1 Content
19.2 Content type
19.3 Content Length
19.4 Encoded Information Types
20 Port realization
21 Conformance
21.1 Origination versus Reception
21.2 Statement requirements
21.3 Static requirements
21.4 Dynamic requirements
Annex A Reference definition of Object Identifiers
Annex B Reference definition of Abstract Information Objects
Annex C Reference definition of Message Store Attributes
Annex D Reference definition of Message Store Auto-Action Types
Annex E Reference definition of EDIMS Functional Objects
Annex F Reference definition of EDIMS Abstract Service
Annex G Reference definition of EDIMS Upper Bounds Parameters
Annex H Reference definition of Directory Object Classes and Attributes
Annex I Enhanced Security Model
I.1 Introduction
I.2 Security Services
I.3 Enhancements to subclause 10.2: Security Services
I.4 Non-repudiation of EDIM Responsibility services
Annex J Directory Object Classes and Attributes
J.1 Introduction
J.2 Object Classes
J.3 Attributes
J.4 Attribute Syntaxes
Annex K Comparison of terms of EDI syntaxes
Annex L Comparison of terms in this Recommendation | International Standard and ITU-T Rec. F.435 | ISO/IEC 10021-...
Annex M Realization of an EDIMG User in the Directory
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS 7521:1992
Specification for electronic messaging enabling the application of BS ISO/IEC 10021 in the United Kingdom
-
BS EN 17419-1:2020
Digital Information Interchange in the Insurance Industry. Transfer of electronic documents, Process and Data Model
-
BS EN 62605:2016
Multimedia systems and equipment. Multimedia e-publishing and e-books. Interchange format for e-dictionaries
-
BS EN 62665:2016
Multimedia systems and equipment. Multimedia e-publishing and e-books technologies. Texture map for auditory presentation of printed texts
CONTENTS
INFORMATION TECHNOLOGY - MESSAGE HANDLING SYSTEMS (MHS): ELECTRONIC DATA INTERCHANGE MESSAGING SYSTEM
1 Scope
2 References
2.1 Presentation references
2.2 Directory references
2.3 Message Handling references
2.4 Additional references
3 Definitions
3.1 Common definitions for MHS
3.2 Common definitions for abstract syntax notation one
3.3 EDI service definitions
3.4 Other EDI definitions
3.5 EDI messaging system definitions
4 Abbreviations
5 Conventions
5.1 Terms
5.2 ASN.1
5.3 Conventions for Attribute Types in Table 2
5.4 Conventions for Attribute Types in Table 4
6 Information objects
7 Common data types
7.1 EDIM Identifier
7.2 Extensions
8 EDI Messages
8.1 Heading Field Component Types
8.2 Heading Fields
8.3 Body Part Types
9 EDI Notifications
9.1 Common Fields
9.2 Positive Notifications
9.3 Negative Notifications
9.4 Forwarded Notifications
10 Primary Object Types
10.1 EDI Messaging User
10.2 EDI Messaging System
11 Primary Port Types
11.1 Origination Port
11.2 Reception Port
12 Abstract Operations
12.1 Origination Abstract Operations
12.2 Reception Abstract Operations
13 Abstract Errors
13.1 Recipient Improperly Specified
14 Other capabilities
15 Secondary Object Types
15.1 EDI User Agent
15.2 EDI Message Store
15.3 Telematic Agent
15.4 Physical Delivery Access Unit
15.5 Message Transfer System
16 Secondary Port Types
16.1 Submission Port
16.2 Delivery Port
16.3 Retrieval Port
16.4 Administration Port
16.5 Import Port
16.6 Export Port
17 User Agent Operation
17.1 Performance of Origination Operations
17.2 Invocation of Reception Operations
17.3 Internal procedures
18 Message Store operation
18.1 Binding to the MS
18.2 Abstract-bind result
18.3 Creation of Information Objects
18.4 Maintenance of Attributes
18.5 Negative Notification
18.6 MS-message-submission extensions
18.7 Auto-Action Types
18.8 Message Store Attributes
18.9 Procedures for EDI MS
19 Message Contents
19.1 Content
19.2 Content type
19.3 Content Length
19.4 Encoded Information Types
20 Port realization
21 Conformance
21.1 Origination versus Reception
21.2 Statement requirements
21.3 Static requirements
21.4 Dynamic requirements
Annex A Reference definition of Object Identifiers
Annex B Reference definition of Abstract Information Objects
Annex C Reference definition of Message Store Attributes
Annex D Reference definition of Message Store Auto-Action Types
Annex E Reference definition of EDIMS Functional Objects
Annex F Reference definition of EDIMS Abstract Service
Annex G Reference definition of EDIMS Upper Bounds Parameters
Annex H Reference definition of Directory Object Classes and Attributes
Annex I Enhanced Security Model
I.1 Introduction
I.2 Security Services
I.3 Enhancements to subclause 10.2: Security Services
I.4 Non-repudiation of EDIM Responsibility services
Annex J Directory Object Classes and Attributes
J.1 Introduction
J.2 Object Classes
J.3 Attributes
J.4 Attribute Syntaxes
Annex K Comparison of terms of EDI syntaxes
Annex L Comparison of terms in this Recommendation | International Standard and ITU-T Rec. F.435 | ISO/IEC 10021-...
Annex M Realization of an EDIMG User in the Directory