ISO 6742-2:2015
Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices
ISO 6742-2:2015 is applicable to retro-reflective devices used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098.
ISO 6742-2:2015 specifies photometric and physical requirements of retro-reflective devices.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General
4.1 Symbols and units used
4.2 Chronological order of tests (only for reflectors)
5 Photometrical requirements
5.1 Reflectors
5.2 Retro-reflective tyres
5.3 Retro-reflective spokes or spoke cases
6 Colorimetric requirements
7 Physical requirements
7.1 Reflectors
7.1.1 Construction
7.1.2 Test methods
7.2 Retro-reflective tyres
7.2.1 Form and location
7.2.2 Test methods
7.3 Retro-reflective spokes or spoke cases
7.3.1 Construction
7.3.2 Test methods
8 Photometric test
8.1 General
8.1.1 Instrumentation arrangement
8.1.2 Source of illumination
8.1.3 Receiver
8.1.4 Observation distance
8.1.5 Illuminance at the reflector
8.2 Reflectors
8.2.1 Principle
8.2.2 Reflector mount (or support)
8.2.3 Test area of reflector
8.2.4 Orientation of reflector
8.3 Retro-reflective tyres
8.3.1 Principle
8.3.2 Test method
8.4 Retro-reflective spokes or spoke cases
8.4.1 Testing assemblies for retro-reflective spokes and spoke cases
8.4.2 Test method
9 Colorimetric test
9.1 Instrumental measurements
9.2 Visual comparison
9.3 Use of methods
10 Marking
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 1927:2010
Pedal bicycles - Safety requirements
-
AS/NZS 1927:2010 A1
Pedal bicycles - Safety requirements: Amendment 1:2014 -
AS/NZS 4287:1995
Child carrier seats for pedal bicycles - Safety requirements
-
BS 6102-13:1991
Cycles, Specification for mating dimensions for splined hub and sprocket
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General
4.1 Symbols and units used
4.2 Chronological order of tests (only for reflectors)
5 Photometrical requirements
5.1 Reflectors
5.2 Retro-reflective tyres
5.3 Retro-reflective spokes or spoke cases
6 Colorimetric requirements
7 Physical requirements
7.1 Reflectors
7.1.1 Construction
7.1.2 Test methods
7.2 Retro-reflective tyres
7.2.1 Form and location
7.2.2 Test methods
7.3 Retro-reflective spokes or spoke cases
7.3.1 Construction
7.3.2 Test methods
8 Photometric test
8.1 General
8.1.1 Instrumentation arrangement
8.1.2 Source of illumination
8.1.3 Receiver
8.1.4 Observation distance
8.1.5 Illuminance at the reflector
8.2 Reflectors
8.2.1 Principle
8.2.2 Reflector mount (or support)
8.2.3 Test area of reflector
8.2.4 Orientation of reflector
8.3 Retro-reflective tyres
8.3.1 Principle
8.3.2 Test method
8.4 Retro-reflective spokes or spoke cases
8.4.1 Testing assemblies for retro-reflective spokes and spoke cases
8.4.2 Test method
9 Colorimetric test
9.1 Instrumental measurements
9.2 Visual comparison
9.3 Use of methods
10 Marking
Bibliography