ISO 27065:2011
Protective clothing — Performance requirements for protective clothing worn by operators applying liquid pesticides
ISO 27065:2011 establishes minimum performance, classification, and labelling requirements for protective clothing worn by operators applying liquid pesticide products diluted in water. Protective clothing covered by ISO 27065:2011 includes, but is not limited to, shirts, jackets, trousers, coveralls, and spray-tight or liquid-tight garments. ISO 27065:2011 addresses protection provided by protective accessories, with the exception of those used for the protection of the head, hands, and feet. ISO 27065:2011 does not address protection against biocides, fumigants or highly volatile liquids.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and testing requirements
5 Performance requirements of protective clothing materials
5.1 Preconditioning
5.2 Material penetration resistance
5.2.1 Liquid penetration resistance (atomizer test)
5.2.2 Liquid penetration resistance (pipette test)
5.3 Material resistance to penetration by liquid under pressure
5.4 Material resistance to permeation
5.5 Material tensile strength
5.6 Material tear resistance
6 Performance requirements of seams
6.1 Preconditioning
6.2 Seam penetration resistance
6.2.1 Liquid penetration (atomizer test)
6.2.2 Liquid penetration test (pipette test)
6.3 Seam resistance to penetration by liquid under pressure
6.4 Seam resistance to permeation
6.5 Seam tensile strength
7 Performance requirements of garments
7.1 Preconditioning
7.2 Practical performance
7.3 Liquid penetration resistance
7.3.1 Low-level spray test
7.3.2 High-level spray test
7.4 Ergonomics
8 Marking and information supplied by the manufacturer
8.1 General
8.2 Labelling
8.3 Instructions for use
8.4 Product technical information
8.4.1 General
8.4.2 Chemical resistance information
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
22/30373478DC
BS EN ISO 13997. Protective clothing. Mechanical properties. Determination of resistance to cutting by sharp objects
-
AS/NZS 1906.2:2007
Retroreflective materials and devices for road traffic control purposes - Retroreflective devices (non-pavement application)
-
AS/NZS 1906.4:2023
Retroreflective materials and devices for road traffic control purposes, Part 4: High-visibility materials for safety garments
-
AS/NZS 2161.1:2016
Occupational protective gloves - Part 1: Selection, use and maintenance
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and testing requirements
5 Performance requirements of protective clothing materials
5.1 Preconditioning
5.2 Material penetration resistance
5.2.1 Liquid penetration resistance (atomizer test)
5.2.2 Liquid penetration resistance (pipette test)
5.3 Material resistance to penetration by liquid under pressure
5.4 Material resistance to permeation
5.5 Material tensile strength
5.6 Material tear resistance
6 Performance requirements of seams
6.1 Preconditioning
6.2 Seam penetration resistance
6.2.1 Liquid penetration (atomizer test)
6.2.2 Liquid penetration test (pipette test)
6.3 Seam resistance to penetration by liquid under pressure
6.4 Seam resistance to permeation
6.5 Seam tensile strength
7 Performance requirements of garments
7.1 Preconditioning
7.2 Practical performance
7.3 Liquid penetration resistance
7.3.1 Low-level spray test
7.3.2 High-level spray test
7.4 Ergonomics
8 Marking and information supplied by the manufacturer
8.1 General
8.2 Labelling
8.3 Instructions for use
8.4 Product technical information
8.4.1 General
8.4.2 Chemical resistance information