ISO 22882:2016
Castors and wheels — Requirements for castors for hospital beds
ISO 22882:2016 specifies the technical requirements, the appropriate dimensions and the requirements for the testing of swivel castors for hospital beds with a wheel diameter of 100 mm or more and which have a central locking device. Swivel castors may be used with the main principal dimensions.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensions and classification
4.1 Characteristics
4.2 Dimensions
4.3 Fixing system
4.4 Load capacity
5 Requirements for testing
5.1 General
5.2 Standard conditions
5.2.1 Environmental conditions
5.2.2 Test sequence
5.3 Initial wheel play
5.3.1 Test objectives, apparatus and procedures
5.3.2 Acceptance criteria
5.4 Initial swivel play
5.4.1 Test objectives, apparatus and procedures
5.4.2 Acceptance criteria
5.5 Electrical resistance test
5.5.1 Test objectives, apparatus and procedures
5.5.2 Test values
5.5.3 Tolerances
5.5.4 Acceptance criteria
5.6 Fatigue test for locking/braking device
5.6.1 Test objectives, apparatus and procedures
5.6.2 Test values
5.6.3 Tolerances
5.6.4 Acceptance criteria
5.7 Efficiency check of wheel braking and/or locking device
5.7.1 Test objectives, apparatus and procedures
5.7.2 Test values
5.7.3 Tolerances
5.7.4 Acceptance criteria
5.8 Efficiency check of swivel braking and/or locking device
5.8.1 Test objectives, apparatus and procedures
5.8.2 Test values
5.8.3 Tolerances
5.8.4 Acceptance criteria
5.9 Static test
5.9.1 Test objectives, apparatus and procedures
5.9.2 Test values
5.9.3 Tolerances
5.9.4 Acceptance criteria
5.10 Dynamic test
5.10.1 Test objectives, apparatus and procedures
5.10.2 Test values
5.10.3 Tolerances
5.10.4 Acceptance criteria
5.11 Efficiency check of wheel braking and/or locking device
5.12 Efficiency check of swivel braking and/or locking device
5.13 Final wheel play
5.13.1 Test objectives, apparatus and procedures
5.13.2 Acceptance criteria
5.14 Final swivel play
5.14.1 Test objectives, apparatus and procedures
5.14.2 Acceptance criteria
6 Conformity
7 Marking
7.1 Product marking
7.2 Marking of electrically conductive or antistatic castors/wheels
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 4011.1:2014
Single-use medical examination gloves - Part 1: Specification for gloves made from rubber latex or rubber solution -
AS/NZS 4011.2:2014
Single-use medical examination gloves - Part 2: Specification for gloves made from poly(vinyl chloride) -
AS/NZS 4179:2014
Single-use sterile rubber surgical gloves - Specification -
AS/NZS 4261:1994
Reusable containers for the collection of sharp items used in human and animal medical applications
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Dimensions and classification
4.1 Characteristics
4.2 Dimensions
4.3 Fixing system
4.4 Load capacity
5 Requirements for testing
5.1 General
5.2 Standard conditions
5.2.1 Environmental conditions
5.2.2 Test sequence
5.3 Initial wheel play
5.3.1 Test objectives, apparatus and procedures
5.3.2 Acceptance criteria
5.4 Initial swivel play
5.4.1 Test objectives, apparatus and procedures
5.4.2 Acceptance criteria
5.5 Electrical resistance test
5.5.1 Test objectives, apparatus and procedures
5.5.2 Test values
5.5.3 Tolerances
5.5.4 Acceptance criteria
5.6 Fatigue test for locking/braking device
5.6.1 Test objectives, apparatus and procedures
5.6.2 Test values
5.6.3 Tolerances
5.6.4 Acceptance criteria
5.7 Efficiency check of wheel braking and/or locking device
5.7.1 Test objectives, apparatus and procedures
5.7.2 Test values
5.7.3 Tolerances
5.7.4 Acceptance criteria
5.8 Efficiency check of swivel braking and/or locking device
5.8.1 Test objectives, apparatus and procedures
5.8.2 Test values
5.8.3 Tolerances
5.8.4 Acceptance criteria
5.9 Static test
5.9.1 Test objectives, apparatus and procedures
5.9.2 Test values
5.9.3 Tolerances
5.9.4 Acceptance criteria
5.10 Dynamic test
5.10.1 Test objectives, apparatus and procedures
5.10.2 Test values
5.10.3 Tolerances
5.10.4 Acceptance criteria
5.11 Efficiency check of wheel braking and/or locking device
5.12 Efficiency check of swivel braking and/or locking device
5.13 Final wheel play
5.13.1 Test objectives, apparatus and procedures
5.13.2 Acceptance criteria
5.14 Final swivel play
5.14.1 Test objectives, apparatus and procedures
5.14.2 Acceptance criteria
6 Conformity
7 Marking
7.1 Product marking
7.2 Marking of electrically conductive or antistatic castors/wheels
Bibliography