ISO 22090-3:2014
Ships and marine technology — Transmitting heading devices (THDs) — Part 3: GNSS principles
ISO 22090-3:2014 specifies general requirements, construction, performance, and testing of transmitting heading device using GNSS principle as required by chapter V, SOLAS 1974 (as amended).
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_4
Section sec_4.1
Section sec_4.2
Section sec_4.3
Section sec_4.4
Section sec_4.5
Section sec_4.6
Section sec_4.7
Section sec_4.8
Section sec_4.9
Section sec_4.9.1
Section sec_4.9.2
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.3
Section sec_5.4
Section sec_5.5
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Section sec_6.2.3
Section sec_6.3
Section sec_6.4
Section sec_6.5
Section sec_6.6
Section sec_6.7
Section sec_6.8
Section sec_6.8.1
Section sec_6.8.2
Section sec_6.8.3
Section sec_6.9
Section sec_6.10
Section sec_6.11
Section sec_7
Annex sec_A
Table tab_A.1
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance and requirements
4.1 Functionality
4.2 Continuous operation
4.3 Presentation of information
4.4 Heading output alignment
4.5 Compensation for brief GNSS signal interruption
4.6 Settling time
4.7 Heading information
4.8 Alert signal
4.9 Interface
5 Accuracy
5.1 General
5.2 Accuracy of transmission data
5.3 Static error (settle point error)
5.4 Dynamic error
5.5 Follow-up error
6 Type tests
6.1 General
6.2 Organization of test conditions
6.3 Settling time test
6.4 Static error test
6.5 Dynamic test
6.6 Follow-up error test
6.7 Back-up test
6.8 Environmental test
6.9 Electromagnetic compatibility test
6.10 Interface test
6.11 Malfunction test
7 Marking and identification
Annex A (informative) Equivalent requirements in ISO 22090-3 and IMO Resolution MSC.116 (73)
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 4869.1:2006
Maritime Survivor Locating Systems (MSLS) - Operating on 121.5 MHz
-
AS/NZS 61097.12:2008
Global maritime distress and safety system (GMDSS) - Survival craft portable two-way VHF radiotelephone apparatus - Operational and performance requirements, methods of testing and required test results
-
AS/NZS 62320.1:2015
Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results -
AS/NZS 62320.3:2015
Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 3: Repeater stations - Minimum operational and performance requirements - Methods of test and required test results
Section sec_1
Section sec_2
Section sec_3
Section sec_3.1
Section sec_3.2
Section sec_3.3
Section sec_3.4
Section sec_3.5
Section sec_3.6
Section sec_3.7
Section sec_3.8
Section sec_3.9
Section sec_3.10
Section sec_3.11
Section sec_4
Section sec_4.1
Section sec_4.2
Section sec_4.3
Section sec_4.4
Section sec_4.5
Section sec_4.6
Section sec_4.7
Section sec_4.8
Section sec_4.9
Section sec_4.9.1
Section sec_4.9.2
Section sec_5
Section sec_5.1
Section sec_5.2
Section sec_5.3
Section sec_5.4
Section sec_5.5
Section sec_6
Section sec_6.1
Section sec_6.2
Section sec_6.2.1
Section sec_6.2.2
Section sec_6.2.3
Section sec_6.3
Section sec_6.4
Section sec_6.5
Section sec_6.6
Section sec_6.7
Section sec_6.8
Section sec_6.8.1
Section sec_6.8.2
Section sec_6.8.3
Section sec_6.9
Section sec_6.10
Section sec_6.11
Section sec_7
Annex sec_A
Table tab_A.1
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Performance and requirements
4.1 Functionality
4.2 Continuous operation
4.3 Presentation of information
4.4 Heading output alignment
4.5 Compensation for brief GNSS signal interruption
4.6 Settling time
4.7 Heading information
4.8 Alert signal
4.9 Interface
5 Accuracy
5.1 General
5.2 Accuracy of transmission data
5.3 Static error (settle point error)
5.4 Dynamic error
5.5 Follow-up error
6 Type tests
6.1 General
6.2 Organization of test conditions
6.3 Settling time test
6.4 Static error test
6.5 Dynamic test
6.6 Follow-up error test
6.7 Back-up test
6.8 Environmental test
6.9 Electromagnetic compatibility test
6.10 Interface test
6.11 Malfunction test
7 Marking and identification
Annex A (informative) Equivalent requirements in ISO 22090-3 and IMO Resolution MSC.116 (73)
Bibliography