Skip to main content

ISO 20998-2:2013

Withdrawn Date published:

Warning: Withdrawn Standard. This document has been replaced by:

Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory

ISO 20998-2:2013 describes ultrasonic attenuation spectroscopy methods for determining the size distributions of a particulate phase dispersed in a liquid at dilute concentrations, where the ultrasonic attenuation spectrum is a linear function of the particle volume fraction. In this regime, particle?particle interactions are negligible. Colloids, dilute dispersions, and emulsions are within the scope of ISO 20998-2:2013. The typical particle size for such analysis ranges from 10 nm to 3 mm, although particles outside this range have also been successfully measured. For solid particles in suspension, size measurements can be made at concentrations typically ranging from 0,1 % volume fraction up to 5 % volume fraction, depending on the density contrast between the solid and liquid phases, the particle size, and the frequency range.

For emulsions, measurements may be made at much higher concentrations. These ultrasonic methods can be used to monitor dynamic changes in the size distribution.

While it is possible to determine the particle size distribution from either the attenuation spectrum or the phase velocity spectrum, the use of attenuation data alone is recommended. The relative variation in phase velocity due to changing particle size is small compared to the mean velocity, so it is often difficult to determine the phase velocity with a high degree of accuracy, particularly at ambient temperature. Likewise, the combined use of attenuation and velocity spectra to determine the particle size is not recommended. The presence of measurement errors (i.e. "noise") in the magnitude and phase spectra can increase the ill-posed nature of the problem and reduce the stability of the inversion.

Get this standard Prices exclude GST
PDF ( Single user document)
$91.24 NZD
HardCopy
$91.24 NZD
Networkable PDF
Price varies
Preview only close
Prev {{ page }}/ {{ numPages }} Next
Preview only close
Prev {{ page }}/ {{ numPages }} Next
Pages: 31

Keep me up-to-date

Sign up to receive updates when there are changes to this standard

Related Information

Similar Standards

  • BS 1796-1:1989

    Test sieving, Methods using test sieves of woven wire cloth and perforated metal plate

  • BS 3406-1:1986

    Methods for determination of particle size distribution, Guide to powder sampling

  • BS 3406-4:1993

    Methods for determination of particle size distribution, Guide to microscope and image analysis methods

  • BS 3625:1963

    Specification for eyepiece and screen graticules for the determination of the particle size of powders

Preview only close
Prev {{ page }}/ {{ numPages }} Next
Preview only close
Prev {{ page }}/ {{ numPages }} Next
Pages: 31

ISO 20998-2:2013

Get this standard Prices exclude GST
PDF ( Single user document)
$91.24 NZD
HardCopy
$91.24 NZD
Networkable PDF
Price varies

Request to add this standard to your subscription

ISO 20998-2:2013

Price varies
Online library subscription

Click "Send request for subscription" to request for your Account Administrator to add this standard to your subscripiton.

Cancel