ISO 14631:2021
Extruded sheets of impact-modified polystyrene (PS-I) — Requirements and test methods
This document specifies the requirements and test methods for solid flat extruded sheets of impact-modified polystyrene (PS-I) without fillers and reinforcing materials.
This document applies only to thickness 0,25 mm to 20,0 . It also applies to PS-I sheet in roll form.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Material
5 Requirements
5.1 Appearance
5.2 Dimensional tolerances
5.2.1 Thickness
5.2.2 Length and width
5.2.3 Rectangularity
5.2.4 Bow of sheets in rolled form
5.3 Properties
5.3.1 General
5.3.2 Mechanical and thermal properties
5.3.3 Behaviour after heating
5.3.4 Physiological behaviour
6 Test methods
6.1 Test specimens
6.1.1 Preparation of test specimens
6.1.2 Conditioning
6.1.3 Testing
6.2 Delivery condition
6.3 Appearance
6.4 Dimensions
6.4.1 Thickness (h)
6.4.2 Length (l) and width (b)
6.4.3 Rectangularity
6.4.4 Bow of sheets in rolled form
6.5 Density
6.6 Mechanical properties
6.6.1 Tensile stress at yield (σY)
6.6.2 Nominal tensile strain at break (εtB)
6.6.3 Modulus of elasticity in tension (Et)
6.6.4 Charpy impact strength of unnotched specimens (acU)
6.6.5 Charpy impact strength of notched specimens (acN)
6.6.6 Multiaxial impact strength
6.6.7 Ball indentation hardness
6.7 Thermal properties
6.7.1 Vicat softening temperature
6.7.2 Determination of shrinkage after heating
7 Designation
7.1 Example for PS-I-sheets
7.2 Example for PS-I sheets in roll form
8 Marking
Annex A (informative) Additional guide values
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS 2782-3:Method 360C:1991
Methods of testing plastics. Mechanical properties, Determination of tear resistance of plastics film and sheeting by the initiation method
-
BS 2782-5:Method 521A:1992
Methods of testing plastics. Optical and colour properties, weathering, Determination of haze of film and sheet
-
BS 2782-6:Method 630A:1994
Methods of testing plastics. Dimensional properties, Determination of thickness by mechanical scanning of flexible sheet
-
BS 2782-6:Method 631A:1993
Methods of testing plastics. Dimensional properties, Determination of gravimetric thickness and yield of flexible sheet
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Material
5 Requirements
5.1 Appearance
5.2 Dimensional tolerances
5.2.1 Thickness
5.2.2 Length and width
5.2.3 Rectangularity
5.2.4 Bow of sheets in rolled form
5.3 Properties
5.3.1 General
5.3.2 Mechanical and thermal properties
5.3.3 Behaviour after heating
5.3.4 Physiological behaviour
6 Test methods
6.1 Test specimens
6.1.1 Preparation of test specimens
6.1.2 Conditioning
6.1.3 Testing
6.2 Delivery condition
6.3 Appearance
6.4 Dimensions
6.4.1 Thickness (h)
6.4.2 Length (l) and width (b)
6.4.3 Rectangularity
6.4.4 Bow of sheets in rolled form
6.5 Density
6.6 Mechanical properties
6.6.1 Tensile stress at yield (σY)
6.6.2 Nominal tensile strain at break (εtB)
6.6.3 Modulus of elasticity in tension (Et)
6.6.4 Charpy impact strength of unnotched specimens (acU)
6.6.5 Charpy impact strength of notched specimens (acN)
6.6.6 Multiaxial impact strength
6.6.7 Ball indentation hardness
6.7 Thermal properties
6.7.1 Vicat softening temperature
6.7.2 Determination of shrinkage after heating
7 Designation
7.1 Example for PS-I-sheets
7.2 Example for PS-I sheets in roll form
8 Marking
Annex A (informative) Additional guide values
Bibliography