ISO 13934-1:2013
Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 13934-1:2013 specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method.
The method is mainly applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fibre, mechanical, or chemical treatment. It can be applicable to fabrics produced by other techniques. It is not normally applicable to geotextiles, nonwovens, coated fabrics, textile-glass woven fabrics, and fabrics made from carbon fibres or polyolefin tape yarns (see Bibliography).
The method specifies the determination of the maximum force and elongation at maximum force of test specimens in equilibrium with the standard atmosphere for testing, and of test specimens in the wet state.
The method is restricted to the use of constant rate of extension (CRE) testing machines.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
Section sec_1
Section sec_2
Section sec_3
Table tab_a
Figure fig_1
Section sec_4
Section sec_5
Section sec_6
Section sec_6.1
Section sec_6.1.1
Section sec_6.1.2
Section sec_6.1.3
Section sec_6.1.4
Section sec_6.1.5
Section sec_6.1.6
Section sec_6.2
Section sec_6.3
Section sec_6.4
Section sec_6.5
Section sec_7
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.3
Section sec_8.4
Section sec_8.4.1
Section sec_8.4.2
Section sec_9
Section sec_9.1
Section sec_9.2
Table tab_1
Section sec_9.3
Section sec_9.3.1
Section sec_9.3.2
Section sec_9.4
Section sec_9.4.1
Section sec_9.4.2
Section sec_9.5
Section sec_10
Section sec_11
Annex sec_A
Annex sec_A.1
Table tab_A.1
Annex sec_A.2
Annex sec_B
Table tab_f
Figure fig_B.1
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Sampling
6 Apparatus
6.1 CRE machine
7 Atmosphere for conditioning and testing
8 Preparation of test specimen
8.1 General
8.2 Dimensions
8.3 Preparation of test specimens
8.4 Wet test specimens
9 Procedure
9.1 Gauge length
9.2 Rate of extension or elongation
9.3 Mounting of test specimens
9.4 Operation
9.5 Tests on wet test specimens
10 Calculation and expression of results
11 Test report
Annex A (informative) Suggested procedure for sampling
Annex B (informative) Locations of test specimens cut from a laboratory sample
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS 1625-6 and 4830:1972
Specifications for woven cotton tapes, light, medium and heavy qualities
-
BS 1771-1:1989
Fabrics for uniforms and workwear, Specification for fabrics of wool and wool blends
-
BS 1771-2:1990
Fabrics for uniforms and workwear, Specification for fabrics from cellulosic fibres, synthetic fibres and blends
-
BS 2471:2005
Textiles. Woven fabrics. Determination of mass per unit length and mass per unit area
Section sec_1
Section sec_2
Section sec_3
Table tab_a
Figure fig_1
Section sec_4
Section sec_5
Section sec_6
Section sec_6.1
Section sec_6.1.1
Section sec_6.1.2
Section sec_6.1.3
Section sec_6.1.4
Section sec_6.1.5
Section sec_6.1.6
Section sec_6.2
Section sec_6.3
Section sec_6.4
Section sec_6.5
Section sec_7
Section sec_8
Section sec_8.1
Section sec_8.2
Section sec_8.3
Section sec_8.4
Section sec_8.4.1
Section sec_8.4.2
Section sec_9
Section sec_9.1
Section sec_9.2
Table tab_1
Section sec_9.3
Section sec_9.3.1
Section sec_9.3.2
Section sec_9.4
Section sec_9.4.1
Section sec_9.4.2
Section sec_9.5
Section sec_10
Section sec_11
Annex sec_A
Annex sec_A.1
Table tab_A.1
Annex sec_A.2
Annex sec_B
Table tab_f
Figure fig_B.1
Reference ref_1
Reference ref_2
Reference ref_3
Reference ref_4
Reference ref_5
Reference ref_6
Reference ref_7
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Sampling
6 Apparatus
6.1 CRE machine
7 Atmosphere for conditioning and testing
8 Preparation of test specimen
8.1 General
8.2 Dimensions
8.3 Preparation of test specimens
8.4 Wet test specimens
9 Procedure
9.1 Gauge length
9.2 Rate of extension or elongation
9.3 Mounting of test specimens
9.4 Operation
9.5 Tests on wet test specimens
10 Calculation and expression of results
11 Test report
Annex A (informative) Suggested procedure for sampling
Annex B (informative) Locations of test specimens cut from a laboratory sample
Bibliography