ISO 13784-2:2002
Reaction-to-fire tests for sandwich panel building systems — Part 2: Test method for large rooms
ISO 13784-2:2002 specifies a test method for determining the reaction to fire of sandwich panel building systems for large rooms and the resulting flame spread on or within the sandwich panel building construction when it is exposed to heat from a simulated internal fire with flames impinging directly on its internal corner. The test method is not intended for evaluating a product's fire resistance. ISO 13784-2:2002 is applicable to both freestanding and self-supporting, and frame-supported, sandwich panel systems, but only to wall and ceiling or roof constructions.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$118.26 NZD
|
|
| HardCopy |
$152.17 NZD
|
|
| Networkable PDF |
Price varies
|
TitlePage - Reaction-to-fire tests for sandwich panel building systems—
TableofContent - Contents Page
Foreword - Foreword
Introduction - Introduction
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Principle
Clause1 - 5 Types of structure
Clause1 - 6 Test specimen
Clause1 - 7 Test room design and construction
UntitledSubclause2 - 7.1 The test method consists of a procedure by which sandwich panel assem...
UntitledSubclause2 - 7.2 Perform the test on a sandwich panel specimen in accordance with
UntitledSubclause2 - 7.3 Provide a doorway in the front wall of the room; no other wall shall ...
UntitledSubclause2 - 7.4 The room may be located indoors or outdoors.
UntitledSubclause2 - 7.5 Full and detailed drawings of the various elements of construction, i...
Clause1 - 8 Ignition source
UntitledSubclause2 - 8.1 The ignition source shall be a propane gas burner made from mild stee...
UntitledSubclause2 - 8.2 The burner shall be mounted on a small trolley so that it is capable ...
UntitledSubclause2 - 8.3 The burner shall be placed on the floor in a corner directly opposite...
UntitledSubclause2 - 8.4 The burner shall be supplied with natural grade propane (
UntitledSubclause2 - 8.5 The burner heat output shall be
Clause1 - 9 Apparatus
UntitledSubclause2 - 9.1 Thermocouples
UntitledSubclause2 - 9.2 Additional equipment
UntitledSubclause3 - 9.2.1 Data recorder—
UntitledSubclause3 - 9.2.2 Timing device—
Clause1 - 10 Procedure
Subclause2 - 10.1 Initial conditions
UntitledSubclause3 - 10.1.1 The temperature in the test facility at the start of the test shal...
UntitledSubclause3 - 10.1.2 The horizontal wind speed measured at a horizontal distance of
UntitledSubclause3 - 10.1.3 The burner shall be in contact with the corner wall. The surface a...
UntitledSubclause3 - 10.1.4 The test set-up shall be photographed or video-recorded prior to t...
Subclause2 - 10.2 Test
UntitledSubclause3 - 10.2.1 Start all recording and measuring devices and record data for at l...
UntitledSubclause3 - 10.2.2 Adjust the burner to the required output levels within
UntitledSubclause3 - 10.2.3 Make a photographic or videotape record of the test or both of the...
UntitledSubclause3 - 10.2.4 During the test, record the following observations and the time at...
UntitledSubclause3 - 10.2.5 End the test if flashover occurs, or after
UntitledSubclause3 - 10.2.6 Report the results of the test in respect of temperatures recorded...
UntitledSubclause3 - 10.2.7 Record any other unusual behaviour.
Clause1 - 11 Precision
Clause1 - 12 Test report
Bibliography - Bibliography
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 1530.3:1999
Methods for fire tests on building materials, components and structures - Simultaneous determination of ignitability, flame propagation, heat release and smoke release
-
AS/NZS 1720.4:2019
Timber structures - Part 4: Fire resistance of timber elements -
AS/NZS 3013:2005
Electrical installations - Classification of the fire and mechanical performance of wiring system elements
-
BS 476-10:2009
Fire tests on building materials and structures, Guide to the principles, selection, role and application of fire testing and their outputs
TitlePage - Reaction-to-fire tests for sandwich panel building systems—
TableofContent - Contents Page
Foreword - Foreword
Introduction - Introduction
Scope - 1 Scope
NormativeReference - 2 Normative references
Clause1 - 4 Principle
Clause1 - 5 Types of structure
Clause1 - 6 Test specimen
Clause1 - 7 Test room design and construction
UntitledSubclause2 - 7.1 The test method consists of a procedure by which sandwich panel assem...
UntitledSubclause2 - 7.2 Perform the test on a sandwich panel specimen in accordance with
UntitledSubclause2 - 7.3 Provide a doorway in the front wall of the room; no other wall shall ...
UntitledSubclause2 - 7.4 The room may be located indoors or outdoors.
UntitledSubclause2 - 7.5 Full and detailed drawings of the various elements of construction, i...
Clause1 - 8 Ignition source
UntitledSubclause2 - 8.1 The ignition source shall be a propane gas burner made from mild stee...
UntitledSubclause2 - 8.2 The burner shall be mounted on a small trolley so that it is capable ...
UntitledSubclause2 - 8.3 The burner shall be placed on the floor in a corner directly opposite...
UntitledSubclause2 - 8.4 The burner shall be supplied with natural grade propane (
UntitledSubclause2 - 8.5 The burner heat output shall be
Clause1 - 9 Apparatus
UntitledSubclause2 - 9.1 Thermocouples
UntitledSubclause2 - 9.2 Additional equipment
UntitledSubclause3 - 9.2.1 Data recorder—
UntitledSubclause3 - 9.2.2 Timing device—
Clause1 - 10 Procedure
Subclause2 - 10.1 Initial conditions
UntitledSubclause3 - 10.1.1 The temperature in the test facility at the start of the test shal...
UntitledSubclause3 - 10.1.2 The horizontal wind speed measured at a horizontal distance of
UntitledSubclause3 - 10.1.3 The burner shall be in contact with the corner wall. The surface a...
UntitledSubclause3 - 10.1.4 The test set-up shall be photographed or video-recorded prior to t...
Subclause2 - 10.2 Test
UntitledSubclause3 - 10.2.1 Start all recording and measuring devices and record data for at l...
UntitledSubclause3 - 10.2.2 Adjust the burner to the required output levels within
UntitledSubclause3 - 10.2.3 Make a photographic or videotape record of the test or both of the...
UntitledSubclause3 - 10.2.4 During the test, record the following observations and the time at...
UntitledSubclause3 - 10.2.5 End the test if flashover occurs, or after
UntitledSubclause3 - 10.2.6 Report the results of the test in respect of temperatures recorded...
UntitledSubclause3 - 10.2.7 Record any other unusual behaviour.
Clause1 - 11 Precision
Clause1 - 12 Test report
Bibliography - Bibliography