ISO 12576-1:2001
Thermal insulation — Insulating materials and products for buildings — Conformity control systems — Part 1: Factory-made products
This part of ISO 12576 establishes five systems for the conformity control of thermal insulating materials and
products for buildings that are factory made.
Its purpose is to provide uniform methods that are used to determine whether a production or a consignment of a
thermal insulating material should be accepted as conforming to the relevant specification requirements.
This part of ISO 12576 provides minimum requirements for each of the systems.
Other systems may be additionally applied when agreed upon between the supplier and purchaser.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$179.13 NZD
|
|
| HardCopy |
$214.78 NZD
|
|
| Networkable PDF |
Price varies
|
Thermal insulation— Insulating materials and products for buildings— Conformity control systems
Contents Page
Foreword
Thermal insulation— Insulating materials and products for buildings— Conformity control systems
1 Scope
2 Normative references
3 Terms and definitions
4 Conformity systems, their elements and recommended application of the systems
4.1 General
4.2 System 1— Manufacturer's declaration of conformity without any participation of a third p...
4.3 System 2— Manufacturer's declaration of conformity, where the manufacturer's production c...
4.4 System 3 — Manufacturer's declaration of conformity, where the manufacturer's production c...
4.5 System 4 — Product certification by an independent approved certification body
4.6 System 5— Lot testing of the consignment by the customer or his representative
5 Factory production control
5.1 General
5.2 Quality manual
5.3 Nature, extent and frequency of inspections and tests
5.4 Testing
5.5 Indirect testing
5.6 Manufacturer's log
5.7 Persons responsible for factory production control
5.7.1 Inspection personnel
5.7.2 Production personnel
5.8 Measures in the event of non-compliance with the requirements
6 Certification of factory production control and of products
6.1 General
6.2 Surveillance and assessment of factory production control
6.2.1 Initial inspection
6.2.2 Routine inspections
6.2.3 Certificate of factory production control
6.3 Product certification
6.3.1 Product certification with surveillance and factory production control
6.3.2 Type testing
6.3.3 Audit testing
6.3.4 Conformity marking
6.4 Measures in the case of non-compliance with the specification or other omissions
7 Sampling
8 Sample size and acceptance criteria for lot testing (System5)
8.1 Sampling and sample size
8.2 Acceptance criteria
8.2.1 General
8.2.2 Test specimens and testing
8.2.3 Classification of defects
8.2.4 Acceptance criteria for inspection by attributes
Bibliography
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS 2972:1989
Methods of test for inorganic thermal insulating materials
-
BS 3958-1:1982
Thermal insulating materials, Magnesia preformed insulation
-
BS 3958-2:1982
Thermal insulating materials, Calcium silicate preformed insulation
-
BS 3958-4:1982
Thermal insulating materials, Bonded preformed man-made mineral fibre pipe sections
Thermal insulation— Insulating materials and products for buildings— Conformity control systems
Contents Page
Foreword
Thermal insulation— Insulating materials and products for buildings— Conformity control systems
1 Scope
2 Normative references
3 Terms and definitions
4 Conformity systems, their elements and recommended application of the systems
4.1 General
4.2 System 1— Manufacturer's declaration of conformity without any participation of a third p...
4.3 System 2— Manufacturer's declaration of conformity, where the manufacturer's production c...
4.4 System 3 — Manufacturer's declaration of conformity, where the manufacturer's production c...
4.5 System 4 — Product certification by an independent approved certification body
4.6 System 5— Lot testing of the consignment by the customer or his representative
5 Factory production control
5.1 General
5.2 Quality manual
5.3 Nature, extent and frequency of inspections and tests
5.4 Testing
5.5 Indirect testing
5.6 Manufacturer's log
5.7 Persons responsible for factory production control
5.7.1 Inspection personnel
5.7.2 Production personnel
5.8 Measures in the event of non-compliance with the requirements
6 Certification of factory production control and of products
6.1 General
6.2 Surveillance and assessment of factory production control
6.2.1 Initial inspection
6.2.2 Routine inspections
6.2.3 Certificate of factory production control
6.3 Product certification
6.3.1 Product certification with surveillance and factory production control
6.3.2 Type testing
6.3.3 Audit testing
6.3.4 Conformity marking
6.4 Measures in the case of non-compliance with the specification or other omissions
7 Sampling
8 Sample size and acceptance criteria for lot testing (System5)
8.1 Sampling and sample size
8.2 Acceptance criteria
8.2.1 General
8.2.2 Test specimens and testing
8.2.3 Classification of defects
8.2.4 Acceptance criteria for inspection by attributes
Bibliography