ISO 10276:2019
Nuclear energy — Fuel technology — Trunnion systems for packages used to transport radioactive material
This document covers trunnion systems used for tie-down, tilting and/or lifting of a package of radioactive material during transport operations.
Aspects included are the design, manufacture, maintenance, inspection and management system. Regulations which can apply during handling operation in nuclear facilities are not addressed in document.
This document does not supersede any of the requirements of international or national regulations, concerning trunnions used for lifting and tie-down.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$240.87 NZD
|
|
| HardCopy |
$277.39 NZD
|
|
| Networkable PDF |
Price varies
|
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, abbreviated terms, symbols and definitions
3.1 Terms and definitions
3.2 Symbols
3.3 Abbreviations
4 Regulatory requirements
4.1 General
4.2 Relevant regulations
5 Design
5.1 General
5.2 Design methodology
5.3 Materials
5.3.1 Material selection
5.3.2 Mechanical properties
5.4 Design loads
5.4.1 Assembly state
5.4.2 Tie-down
5.4.3 Lifting and/or tilting
5.4.4 Load cycles for fatigue analysis
5.5 Methods of analysis and design criteria
5.5.1 General
5.5.2 Strength analysis using analytical methods
5.5.3 Strength analysis using FEA methods
5.5.4 Brittle fracture evaluation
5.5.5 Fatigue analysis
5.6 Other requirements and recommendations
6 Manufacture
6.1 General
6.2 Assembly
6.3 Inspection during manufacture and assembly
6.3.1 Dimensional and visual inspection
6.3.2 Non-destructive examination
6.4 Testing during manufacture and assembly
6.4.1 Scope of testing
6.4.2 Chemical analysis
6.4.3 Mechanical testing of material properties
6.4.4 Static testing
7 Maintenance
7.1 General
7.2 Maintenance schedule
7.3 Periodic inspection
7.3.1 General
7.3.2 Removable trunnions
7.3.3 Welded trunnions
7.3.4 Trunnion surfaces
7.3.5 Attachment threads in packaging body
7.3.6 Attachment bolts
7.3.7 Feature dimensions
7.4 Periodic testing
7.4.1 Types of testing
7.4.2 Trunnion system
7.4.3 Weld areas
7.5 Component replacement
7.6 Repairs
7.6.1 General
7.6.2 Features to be repaired and methods
8 Quality management system
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
BS EN ISO 10276:2021
Nuclear energy. Fuel technology. Trunnion systems for packages used to transport radioactive material
-
BS EN ISO 12183:2019
Nuclear fuel technology. Controlled-potential coulometric assay of plutonium
-
BS EN ISO 12799:2019
Nuclear energy. Determination of nitrogen content in UO<sub>2</sub>, (U,Gd)O<sub>2</sub> and (U,Pu)O<sub>2</sub> sintered pellets. Inert gas extraction and conductivity detection method
-
BS EN ISO 12800:2019
Nuclear fuel technology. Guidelines on the measurement of the specific surface area of uranium oxide powders by the BET method
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, abbreviated terms, symbols and definitions
3.1 Terms and definitions
3.2 Symbols
3.3 Abbreviations
4 Regulatory requirements
4.1 General
4.2 Relevant regulations
5 Design
5.1 General
5.2 Design methodology
5.3 Materials
5.3.1 Material selection
5.3.2 Mechanical properties
5.4 Design loads
5.4.1 Assembly state
5.4.2 Tie-down
5.4.3 Lifting and/or tilting
5.4.4 Load cycles for fatigue analysis
5.5 Methods of analysis and design criteria
5.5.1 General
5.5.2 Strength analysis using analytical methods
5.5.3 Strength analysis using FEA methods
5.5.4 Brittle fracture evaluation
5.5.5 Fatigue analysis
5.6 Other requirements and recommendations
6 Manufacture
6.1 General
6.2 Assembly
6.3 Inspection during manufacture and assembly
6.3.1 Dimensional and visual inspection
6.3.2 Non-destructive examination
6.4 Testing during manufacture and assembly
6.4.1 Scope of testing
6.4.2 Chemical analysis
6.4.3 Mechanical testing of material properties
6.4.4 Static testing
7 Maintenance
7.1 General
7.2 Maintenance schedule
7.3 Periodic inspection
7.3.1 General
7.3.2 Removable trunnions
7.3.3 Welded trunnions
7.3.4 Trunnion surfaces
7.3.5 Attachment threads in packaging body
7.3.6 Attachment bolts
7.3.7 Feature dimensions
7.4 Periodic testing
7.4.1 Types of testing
7.4.2 Trunnion system
7.4.3 Weld areas
7.5 Component replacement
7.6 Repairs
7.6.1 General
7.6.2 Features to be repaired and methods
8 Quality management system
Bibliography