AS/NZS 60695.11.3:2004
Fire hazard testing - Test flames - 500 W flames - Apparatus and confirmational test methods
Gives the detailed requirements for the production of a nominal 500 W, pre-mixed type test flame. The approximate overall height is 125 mm. Four methods are given: flames A and D may only be produced using methane, flame B may only be produced using propane and flame C may be produced using either methane or propane. Has the status of a basic safety publication in accordance with IEC Guide 104. Identical to and reproduced from IEC/TS 60695-11-3:2004 including Amendment 1.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$147.60 NZD
|
|
| HardCopy |
$164.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 60695.11.3:2004
Contents
Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Method A Production of a standardized 500 W nom
4.1 Requirements
4.2 Apparatus and fuel
4.2.1 Burner
4.2.2 Flowmeter
4.2.3 Manometer
4.2.4 Control valve
4.2.5 Copper block
4.2.6 Thermocouple
4.2.7 Temperature/time indicating/recording and timing devices
4.2.8 Fuel gas
4.2.9 Laboratory fumehood/chamber
4.3 Production of test flame
4.4 Confirmation of the test flame
4.4.1 Principle
4.4.2 Procedure
4.4.3 Verification
5 Method B
6 Method C Production of a standardized 500 W nom
6.1 Requirements
6.2 Apparatus and fuel
6.2.1 Burner
6.2.2 Flowmeters
6.2.3 Manometer
6.2.4 Control valves
6.2.5 Copper block
6.2.6 Thermocouple
6.2.7 Temperature/time indicating/recording and timing devices
6.2.8 Fuel gas
6.2.9 Air supply
6.2.10 Laboratory fumehood/chamber
6.3 Production of test flame
6.4 Confirmation of the test flame
6.4.1 Principle
6.4.2 Procedure
6.4.3 Verification
7 Method D
8 Classification and designation
Figure 1 - Copper Block
Figure 2 - Flame height gauge
Annex A Test method A arrangement
Figure A.1 - General assembly and details
Figure A.1 (continued)
Figure A.2 - Supply arrangement for burner (example)
Figure A.3 - Confirmatory test arrangement
Annex B (withdrawn)
Annex C Test method C arrangement
Figure C.1 - Burner, method C - General assembly
Figure C.2 - Burner details - Burner barrel, O-ring, air manifold and air supply tube
Figure C.3 - Burner details - Gas supply tube and gas jet
Figure C.4 - Burner details - Burner base and elbow block
Figure C.5 - Supply arrangement for burner (example)
Figure C.6 - Confirmatory test arrangement
Annex D (withdrawn)
Annex E Recommended arrangements for the use of test flames
Annex F Test arrangements for tests on equipment
Figure F.1 - Examples of test arrangements
Annex G Test arrangements for tests on material
Figure G.1 Examples of test arrangements
Annex H Access to equipment manufacturers and suppliers
Bibliography
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 3000:2018
Electrical installations - Known as the Australian/New Zealand Wiring Rules -
AS/NZS 3000:2018 A1
Electrical installations (known as the Australian/New Zealand Wiring Rules): Amendment 1 -
AS/NZS 3000:2018 A2
Electrical Installations (known as the Australian/New Zealand Wiring Rules)
-
AS/NZS 3000:2018 A3
Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 60695.11.3:2004
Contents
Preface
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Method A Production of a standardized 500 W nom
4.1 Requirements
4.2 Apparatus and fuel
4.2.1 Burner
4.2.2 Flowmeter
4.2.3 Manometer
4.2.4 Control valve
4.2.5 Copper block
4.2.6 Thermocouple
4.2.7 Temperature/time indicating/recording and timing devices
4.2.8 Fuel gas
4.2.9 Laboratory fumehood/chamber
4.3 Production of test flame
4.4 Confirmation of the test flame
4.4.1 Principle
4.4.2 Procedure
4.4.3 Verification
5 Method B
6 Method C Production of a standardized 500 W nom
6.1 Requirements
6.2 Apparatus and fuel
6.2.1 Burner
6.2.2 Flowmeters
6.2.3 Manometer
6.2.4 Control valves
6.2.5 Copper block
6.2.6 Thermocouple
6.2.7 Temperature/time indicating/recording and timing devices
6.2.8 Fuel gas
6.2.9 Air supply
6.2.10 Laboratory fumehood/chamber
6.3 Production of test flame
6.4 Confirmation of the test flame
6.4.1 Principle
6.4.2 Procedure
6.4.3 Verification
7 Method D
8 Classification and designation
Figure 1 - Copper Block
Figure 2 - Flame height gauge
Annex A Test method A arrangement
Figure A.1 - General assembly and details
Figure A.1 (continued)
Figure A.2 - Supply arrangement for burner (example)
Figure A.3 - Confirmatory test arrangement
Annex B (withdrawn)
Annex C Test method C arrangement
Figure C.1 - Burner, method C - General assembly
Figure C.2 - Burner details - Burner barrel, O-ring, air manifold and air supply tube
Figure C.3 - Burner details - Gas supply tube and gas jet
Figure C.4 - Burner details - Burner base and elbow block
Figure C.5 - Supply arrangement for burner (example)
Figure C.6 - Confirmatory test arrangement
Annex D (withdrawn)
Annex E Recommended arrangements for the use of test flames
Annex F Test arrangements for tests on equipment
Figure F.1 - Examples of test arrangements
Annex G Test arrangements for tests on material
Figure G.1 Examples of test arrangements
Annex H Access to equipment manufacturers and suppliers
Bibliography
Previous versions
AS/NZS 60695.11.3:2004
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.