AS/NZS 4886:2007
Domestic solid fuel burning appliance - Pellet heaters - Determination of flue gas emission
Specifies a test method for determining the rate of particulate emission from domestic pellet burning appliances and the associated particulate emission acceptance criteria.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$100.80 NZD
|
|
| HardCopy |
$112.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 4886:2007 DOMESTIC SOLID FUEL BURNING APPLIANCE-PELLET HEATERS-DETERMINATION OF FLUE GAS EMISSION
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.2.1 General
1.2.2 Included appliances
1.2.3 Excluded appliances
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Appliance particulate emission factor
1.4.2 Central heating appliance
1.4.3 Cooking stove appliances
1.4.4 Particulate emission factor
1.4.5 Shall
1.4.6 Should
1.4.7 Standard temperature
1.4.8 Standard pressure
1.5 PRINCIPLE
SECTION 2 APPARATUS AND REAGENT
2.1 GENERAL
2.2 AMBIENT TEMPERATURE MEASUREMENT SYSTEM
2.3 AMBIENT AIR PRESSURE MEASUREMENT SYSTEM
2.4 WEIGHT DETERMINATION SYSTEM
2.5 SAMPLING TRAIN
2.6 DRAUGHT GAUGE
2.7 DESICCATORS
2.8 ACETONE
2.9 DISHES
2.10 CARBON DIOXIDE ANALYZER (OPTIONAL)
SECTION 3 CONFIGURATION OF TEST EQUIPMENT
3.1 GENERAL
3.2 DILUTION TUNNEL
3.2.1 Hood
3.2.2 Connectors
3.2.3 Bends
3.2.4 Sampling section
3.2.5 Extraction fan
3.2.6 Component assembly
3.2.7 Pitot tube location
3.3 SAMPLING TRAIN
3.3.1 General
3.3.2 Probe
3.3.3 Filter coupling
3.3.4 Temperature probes
3.3.5 Dryer coupling
3.3.6 Exhaust pump
3.3.7 Joint seals
SECTION 4 CALIBRATIONS
4.1 GENERAL
4.2 DRY GAS METER
4.3 DILUTION TUNNEL
4.4 WEIGHING INSTRUMENTS
4.5 TEMPERATURE MEASUREMENT
4.6 DIFFERENTIAL PRESSURE MANOMETER AND DRAUGHT GAUGE
4.7 CARBON DIOXIDE ANALYZER
SECTION 5 TEST FUEL
SECTION 6 TEST PROCEDURE
6.1 GENERAL
6.2 DILUTION HOOD AND TUNNEL
6.3 DILUTION TUNNEL
6.3.1 General
6.3.2 Flue pipe draft
6.4 TEST PREPARATION
6.4.1 Appliance preparation
6.4.2 Sample collection system
6.5 TEST FUEL LOAD
6.6 BURN CYCLES
6.7 SAMPLING TRAIN OPERATION
6.8 SAMPLE TREATMENT
6.9 SAMPLE MEASUREMENT
6.10 CALCULATIONS
6.10.1 Sample weight
6.10.2 Sample flow volume
6.10.3 Dilution tunnel flow volume
6.10.4 Volume ratio
6.10.5 Particulate emission weight
6.10.6 Particulate emission factor
6.10.7 Burn-rate emission factors
6.10.8 Appliance particulate emission factor
SECTION 7 MAXIMUM ALLOWABLE APPLIANCE PARTICULATE EMISSION FACTOR
7.1 PELLET BURNING APPLIANCES
7.2 VALID TESTS
SECTION 8 TESTING DOCUMENTATION AND TEST REPORTS
8.1 GENERAL
8.2 DOCUMENTATION
8.3 TEST REPORT
8.4 RETENTION OF RECORDS
8.5 PUBLISHED RESULTS
SECTION 9 VARIATION FROM TESTED APPLIANCE
9.1 GENERAL
9.2 RETESTING EXEMPTION
SECTION 10 MARKING
APPENDIX A - DRY GAS METER CALIBRATION
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 PROCEDURE
A5 REPORT
APPENDIX B - DILUTION TUNNEL CALIBRATION
B1 SCOPE
B2 PRINCIPLE
B3 PROCEDURE
B4 REPORT
APPENDIX C - CARBON DIOXIDE INSTRUMENT CALIBRATION
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 CALIBRATION PROCEDURE
C5 CALIBRATION BEFORE EACH USE
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Domestic solid fuel burning appliances - Pellet heaters - Method for determination of power output and efficiency
Related Information
Similar Standards
-
AS/NZS 2918:2018
Domestic solid fuel burning appliances - Installation -
AS/NZS 3869:1999
Domestic solid fuel burning appliances - Design and construction
-
AS/NZS 4012:2014
Domestic solid fuel burning appliances - Method for determination of power output and efficiency -
AS/NZS 4012:2014 A1
Domestic solid fuel burning appliances - Method for determination of power output and efficiency: Amendment 1:2015
AS/NZS 4886:2007 DOMESTIC SOLID FUEL BURNING APPLIANCE-PELLET HEATERS-DETERMINATION OF FLUE GAS EMISSION
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.2.1 General
1.2.2 Included appliances
1.2.3 Excluded appliances
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Appliance particulate emission factor
1.4.2 Central heating appliance
1.4.3 Cooking stove appliances
1.4.4 Particulate emission factor
1.4.5 Shall
1.4.6 Should
1.4.7 Standard temperature
1.4.8 Standard pressure
1.5 PRINCIPLE
SECTION 2 APPARATUS AND REAGENT
2.1 GENERAL
2.2 AMBIENT TEMPERATURE MEASUREMENT SYSTEM
2.3 AMBIENT AIR PRESSURE MEASUREMENT SYSTEM
2.4 WEIGHT DETERMINATION SYSTEM
2.5 SAMPLING TRAIN
2.6 DRAUGHT GAUGE
2.7 DESICCATORS
2.8 ACETONE
2.9 DISHES
2.10 CARBON DIOXIDE ANALYZER (OPTIONAL)
SECTION 3 CONFIGURATION OF TEST EQUIPMENT
3.1 GENERAL
3.2 DILUTION TUNNEL
3.2.1 Hood
3.2.2 Connectors
3.2.3 Bends
3.2.4 Sampling section
3.2.5 Extraction fan
3.2.6 Component assembly
3.2.7 Pitot tube location
3.3 SAMPLING TRAIN
3.3.1 General
3.3.2 Probe
3.3.3 Filter coupling
3.3.4 Temperature probes
3.3.5 Dryer coupling
3.3.6 Exhaust pump
3.3.7 Joint seals
SECTION 4 CALIBRATIONS
4.1 GENERAL
4.2 DRY GAS METER
4.3 DILUTION TUNNEL
4.4 WEIGHING INSTRUMENTS
4.5 TEMPERATURE MEASUREMENT
4.6 DIFFERENTIAL PRESSURE MANOMETER AND DRAUGHT GAUGE
4.7 CARBON DIOXIDE ANALYZER
SECTION 5 TEST FUEL
SECTION 6 TEST PROCEDURE
6.1 GENERAL
6.2 DILUTION HOOD AND TUNNEL
6.3 DILUTION TUNNEL
6.3.1 General
6.3.2 Flue pipe draft
6.4 TEST PREPARATION
6.4.1 Appliance preparation
6.4.2 Sample collection system
6.5 TEST FUEL LOAD
6.6 BURN CYCLES
6.7 SAMPLING TRAIN OPERATION
6.8 SAMPLE TREATMENT
6.9 SAMPLE MEASUREMENT
6.10 CALCULATIONS
6.10.1 Sample weight
6.10.2 Sample flow volume
6.10.3 Dilution tunnel flow volume
6.10.4 Volume ratio
6.10.5 Particulate emission weight
6.10.6 Particulate emission factor
6.10.7 Burn-rate emission factors
6.10.8 Appliance particulate emission factor
SECTION 7 MAXIMUM ALLOWABLE APPLIANCE PARTICULATE EMISSION FACTOR
7.1 PELLET BURNING APPLIANCES
7.2 VALID TESTS
SECTION 8 TESTING DOCUMENTATION AND TEST REPORTS
8.1 GENERAL
8.2 DOCUMENTATION
8.3 TEST REPORT
8.4 RETENTION OF RECORDS
8.5 PUBLISHED RESULTS
SECTION 9 VARIATION FROM TESTED APPLIANCE
9.1 GENERAL
9.2 RETESTING EXEMPTION
SECTION 10 MARKING
APPENDIX A - DRY GAS METER CALIBRATION
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 PROCEDURE
A5 REPORT
APPENDIX B - DILUTION TUNNEL CALIBRATION
B1 SCOPE
B2 PRINCIPLE
B3 PROCEDURE
B4 REPORT
APPENDIX C - CARBON DIOXIDE INSTRUMENT CALIBRATION
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 CALIBRATION PROCEDURE
C5 CALIBRATION BEFORE EACH USE
AS/NZS 4886:2007
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.