AS/NZS 4546:2004
Specification for woven wool packs for greasy wool (withdrawn in Australia)
In this edition requirements for mean bending length and breaking strength of nylon wool pack fabric after exposure to ultraviolet light have been introduced. Also, in response to changing industry requirements, performance requirements have been altered for both nylon and polyethlylene (HDPE) fabric. (Note: withdrawn by AS on 28/02/2020, however remains current in NZ)
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$94.50 NZD
|
|
| HardCopy |
$105.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 4546:2004 Specification for woven wool packs for greasy wool
AS/NZS 4546:2004 SPECIFICATION FOR WOVEN WOOL PACKS FOR GREASY WOOL
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 REFERENCED DOCUMENTS
1.4 TYPE DESIGNATION
1.5 LABELLING
1.5.1 Manufacturer's label
1.5.2 New Zealand industry labels
SECTION 2 DESIGN AND CONSTRUCTION
2.1 GENERAL REQUIREMENTS
2.1.1 Fabric
2.1.2 Dimensions
2.1.3 Construction
2.2 TYPE A WOOL PACKS (NYLONS)
2.2.1 Fabric
2.2.2 Mass
2.3 TYPE B WOOL PACKS (HDPE)
2.3.1 Fabric
2.3.2 Mass
SECTION 3 PERFORMANCE AND TESTING
3.1 GENERAL REQUIREMENTS
3.2 TEST REQUIREMENTS
3.2.1 Breaking force
3.2.2 Extensibility
3.2.3 Tearing force
3.2.4 Seam strength
3.2.5 Mean bending length
3.2.6 Fibrillation
3.2.7 Adhesion of wool to anti-slip coating
3.2.8 Surface frictional properties
3.2.9 Handling resistance
3.2.10 Breaking force UV exposure
3.3 SELECTION OF SAMPLES-AUSTRALIAN REQUIREMENTS
3.4 TEST SPECIMENS
3.4.1 Breaking force, extensibility of the fabric under load and tearing force
3.4.2 Seam strength and extensions of the wool pack
3.5 CALCULATION AND EXPRESSION OF RESULTS
3.5.1 Breaking force, tearing force and seam strength
3.5.2 Extensibility of the fabric under load
APPENDIX A - SPECIFICATIONS FOR THE ATTACHMENT OF THE IDENTIFICATION LABEL TO TYPE A (NYLON) WOOL PACKS
A1 SCOPE
A2 REQUIREMENTS
A3 POSITION OF LABEL
A4 STITCHING
A5 GENERAL
A6 ATTACHMENT PROCEDURE
APPENDIX B - SPECIFICATIONS FOR THE ATTACHMENT OF THE IDENTIFICATION LABEL TO TYPE B WOOL PACKS
B1 SCOPE
B2 DESCRIPTION
B3 POSITION OF LABEL
B4 USE OF ADHESIVE
B5 STITCHING
B6 ATTACHMENT PROCEDURE
APPENDIX C - SELECTION OF SAMPLES FOR EXAMINATION, MEASUREMENT, AND PERFORMANCE TESTING-AUSTRALIAN REQUIREMENTS
C1 SCOPE
C2 GENERAL REQUIREMENTS
C3 SAMPLE SELECTION
C4 SAMPLING FOR COMPLIANCE WITH THE DESIGN AND CONSTRUCTION REQUIREMENTS AND MARKING REQUIREMENTS OF THE STANDARD
C5 SAMPLING FOR COMPLIANCE WITH THE PERFORMANCE AND TESTING REQUIREMENTS OF THE STANDARD
C6 COMPLIANCE WITH THE STANDARD
C7 EXTENDED SAMPLING AND TESTING
C7.1 General
C7.2 Sample selection
C7.3 Compliance sampling for design and construction requirements and marking requirements
C7.4 Compliance sampling for performance and testing requirements
C7.5 Compliance with the Standard
Previous versions
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 1599:1997
Pressure-sensitive adhesive packaging tapes
-
AS/NZS 4547.0:2004
Methods of testing woolpacks for greasy wool - Part 0: Introduction and list of methods -
AS/NZS 4547.1:1999
Methods of testing woolpacks for greasy wool - Part 1: Fibrillation of woven, HDPE fabric -
AS/NZS 4547.1:1999 A1
Methods of testing woolpacks for greasy wool - Part 1: Fibrillation of woven, HDPE fabric: Amendment 1
AS/NZS 4546:2004 Specification for woven wool packs for greasy wool
AS/NZS 4546:2004 SPECIFICATION FOR WOVEN WOOL PACKS FOR GREASY WOOL
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 REFERENCED DOCUMENTS
1.4 TYPE DESIGNATION
1.5 LABELLING
1.5.1 Manufacturer's label
1.5.2 New Zealand industry labels
SECTION 2 DESIGN AND CONSTRUCTION
2.1 GENERAL REQUIREMENTS
2.1.1 Fabric
2.1.2 Dimensions
2.1.3 Construction
2.2 TYPE A WOOL PACKS (NYLONS)
2.2.1 Fabric
2.2.2 Mass
2.3 TYPE B WOOL PACKS (HDPE)
2.3.1 Fabric
2.3.2 Mass
SECTION 3 PERFORMANCE AND TESTING
3.1 GENERAL REQUIREMENTS
3.2 TEST REQUIREMENTS
3.2.1 Breaking force
3.2.2 Extensibility
3.2.3 Tearing force
3.2.4 Seam strength
3.2.5 Mean bending length
3.2.6 Fibrillation
3.2.7 Adhesion of wool to anti-slip coating
3.2.8 Surface frictional properties
3.2.9 Handling resistance
3.2.10 Breaking force UV exposure
3.3 SELECTION OF SAMPLES-AUSTRALIAN REQUIREMENTS
3.4 TEST SPECIMENS
3.4.1 Breaking force, extensibility of the fabric under load and tearing force
3.4.2 Seam strength and extensions of the wool pack
3.5 CALCULATION AND EXPRESSION OF RESULTS
3.5.1 Breaking force, tearing force and seam strength
3.5.2 Extensibility of the fabric under load
APPENDIX A - SPECIFICATIONS FOR THE ATTACHMENT OF THE IDENTIFICATION LABEL TO TYPE A (NYLON) WOOL PACKS
A1 SCOPE
A2 REQUIREMENTS
A3 POSITION OF LABEL
A4 STITCHING
A5 GENERAL
A6 ATTACHMENT PROCEDURE
APPENDIX B - SPECIFICATIONS FOR THE ATTACHMENT OF THE IDENTIFICATION LABEL TO TYPE B WOOL PACKS
B1 SCOPE
B2 DESCRIPTION
B3 POSITION OF LABEL
B4 USE OF ADHESIVE
B5 STITCHING
B6 ATTACHMENT PROCEDURE
APPENDIX C - SELECTION OF SAMPLES FOR EXAMINATION, MEASUREMENT, AND PERFORMANCE TESTING-AUSTRALIAN REQUIREMENTS
C1 SCOPE
C2 GENERAL REQUIREMENTS
C3 SAMPLE SELECTION
C4 SAMPLING FOR COMPLIANCE WITH THE DESIGN AND CONSTRUCTION REQUIREMENTS AND MARKING REQUIREMENTS OF THE STANDARD
C5 SAMPLING FOR COMPLIANCE WITH THE PERFORMANCE AND TESTING REQUIREMENTS OF THE STANDARD
C6 COMPLIANCE WITH THE STANDARD
C7 EXTENDED SAMPLING AND TESTING
C7.1 General
C7.2 Sample selection
C7.3 Compliance sampling for design and construction requirements and marking requirements
C7.4 Compliance sampling for performance and testing requirements
C7.5 Compliance with the Standard
Previous versions
AS/NZS 4546:2004
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.