AS/NZS 4266.2:2017
Reconstituted wood-based panels - Methods of testing - Part 2: Decorative overlaid panels
Covers methods of test for properties relating to decorative overlaid reconstituted wood panels. Decorative overlays are low pressure melamine, PVC film, decorative foils and wood veneer. Panels that may be overlaid are specified by AS/NZS 1859 Parts 1, 2 and 4.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$139.50 NZD
|
|
| HardCopy |
$155.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 4266.2:2017 RECONSTITUTED WOOD-BASED PANELS-METHODS OF TESTING - DECORATIVE OVERLAID PANELS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 TEST EQUIPMENT
1.4 SAMPLING
1.5 EXPRESSION OF RESULTS
1.6 TEST REPORT
SECTION 2 ASSESSING APPEARANCE OF MELAMINE OVERLAID PANELS
2.1 PRINCIPLE
2.2 TEXT EQUIPMENT
2.3 TEST PIECES
2.4 PROCEDURE
2.5 RESULTS
SECTION 3 RESISTANCE TO SURFACE ABRASION TABER ABRASION TEST
3.1 PRINCIPLE
3.2 DEFINITIONS
3.2.1 Initial wear point (IP)
3.2.2 Final wear point (FP)
3.3 TEST EQUIPMENT
3.4 TEST PIECES
3.5 PROCEDURE
3.5.1 Calibration of abrasive paper
3.5.2 Abrasion testing
3.6 EXPRESSION OF RESULTS
SECTION 4 RESIN CURE TEST
4.1 PRINCIPLE
4.2 MATERIALS AND TEST EQUIPMENT
4.2.1 Materials (Method 1)
4.2.2 Equipment (Method 1)
4.2.3 Equipment (Method 2)
4.3 TEST PIECES
4.4 PROCEDURE
4.4.1 Method 1
4.4.2 Method 2
4.5 EXPRESSION OF RESULTS
SECTION 5 POROSITY OF LAMINATED SURFACE TEST
5.1 PRINCIPLE
5.2 TEST EQUIPMENT
5.3 TEST PIECES
5.4 PROCEDURE
5.5 EXPRESSION OF RESULTS
SECTION 6 RESISTANCE TO STEAM TEST
6.1 PRINCIPLE
6.2 TEST EQUIPMENT
6.3 TEST PIECES
6.4 PROCEDURE
6.5 EXPRESSION OF RESULTS
SECTION 7 RESISTANCE TO CRACKING TEST
7.1 PRINCIPLE
7.2 TEST EQUIPMENT
7.3 TEST PIECES
7.4 PROCEDURE
7.5 EXPRESSION OF RESULTS
SECTION 8 RESISTANCE TO STAINING TEST
8.1 PRINCIPLE
8.2 TEST EQUIPMENT
8.3 TEST PIECES
8.4 PROCEDURE
8.5 EXPRESSION OF RESULTS
SECTION 9 BOND STRENGTH OF PVC FILM TEST
9.1 PRINCIPLE
9.2 TEST EQUIPMENT
9.3 TEST PIECES
9.4 PROCEDURE
9.5 EXPRESSION OF RESULTS
SECTION 10 HEAT RESISTANCE OF FILM TEST
10.1 PRINCIPLE
10.2 TEST EQUIPMENT
10.3 TEST PIECES
10.4 PROCEDURE
10.5 EXPRESSION OF RESULTS
SECTION 11 MOISTURE RESISTANCE OF FILMS TEST
11.1 PRINCIPLE
11.2 TEST EQUIPMENT
11.3 TEST PIECES
11.4 PROCEDURE
11.5 EXPRESSION OF RESULTS
SECTION 12 ADHESION OF PAPER FOILS TEST
12.1 PRINCIPLE
12.2 TEST EQUIPMENT
12.3 TEST PIECES
12.4 PROCEDURE
12.5 EXPRESSION OF RESULTS
SECTION 13 VENEER BOND STRENGTH TEST
13.1 PRINCIPLE
13.2 TEST EQUIPMENT
13.3 TEST PIECES
13.4 PROCEDURE
13.5 EXPRESSION OF RESULTS
SECTION 14 GLUE BOND DURABILITY TEST
14.1 PRINCIPLE
14.2 TEST EQUIPMENT
14.3 TEST PIECES
14.4 PROCEDURE
14.5 EXPRESSION OF RESULTS
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Reconstituted wood-based panels - Specifications - Part 3: Decorative overlaid wood panels
High pressure decorative laminates - Sheets made from thermosetting resins - Determination of properties
Related Information
Similar Standards
-
AS/NZS 1462.1:2006
Methods of test for plastics pipes and fittings - Method for determining the dimensions of pipes and fittings
-
AS/NZS 1462.10:1998
Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications
-
AS/NZS 1462.11:1996
Methods of test for plastics pipes and fittings - Method 11: Method for high temperature stress-relief testing of fittings
-
AS/NZS 1462.13:2006
Methods of test for plastics pipes and fittings - Method for the determination of elastomeric seal joint contact width and pressure
AS/NZS 4266.2:2017 RECONSTITUTED WOOD-BASED PANELS-METHODS OF TESTING - DECORATIVE OVERLAID PANELS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 TEST EQUIPMENT
1.4 SAMPLING
1.5 EXPRESSION OF RESULTS
1.6 TEST REPORT
SECTION 2 ASSESSING APPEARANCE OF MELAMINE OVERLAID PANELS
2.1 PRINCIPLE
2.2 TEXT EQUIPMENT
2.3 TEST PIECES
2.4 PROCEDURE
2.5 RESULTS
SECTION 3 RESISTANCE TO SURFACE ABRASION TABER ABRASION TEST
3.1 PRINCIPLE
3.2 DEFINITIONS
3.2.1 Initial wear point (IP)
3.2.2 Final wear point (FP)
3.3 TEST EQUIPMENT
3.4 TEST PIECES
3.5 PROCEDURE
3.5.1 Calibration of abrasive paper
3.5.2 Abrasion testing
3.6 EXPRESSION OF RESULTS
SECTION 4 RESIN CURE TEST
4.1 PRINCIPLE
4.2 MATERIALS AND TEST EQUIPMENT
4.2.1 Materials (Method 1)
4.2.2 Equipment (Method 1)
4.2.3 Equipment (Method 2)
4.3 TEST PIECES
4.4 PROCEDURE
4.4.1 Method 1
4.4.2 Method 2
4.5 EXPRESSION OF RESULTS
SECTION 5 POROSITY OF LAMINATED SURFACE TEST
5.1 PRINCIPLE
5.2 TEST EQUIPMENT
5.3 TEST PIECES
5.4 PROCEDURE
5.5 EXPRESSION OF RESULTS
SECTION 6 RESISTANCE TO STEAM TEST
6.1 PRINCIPLE
6.2 TEST EQUIPMENT
6.3 TEST PIECES
6.4 PROCEDURE
6.5 EXPRESSION OF RESULTS
SECTION 7 RESISTANCE TO CRACKING TEST
7.1 PRINCIPLE
7.2 TEST EQUIPMENT
7.3 TEST PIECES
7.4 PROCEDURE
7.5 EXPRESSION OF RESULTS
SECTION 8 RESISTANCE TO STAINING TEST
8.1 PRINCIPLE
8.2 TEST EQUIPMENT
8.3 TEST PIECES
8.4 PROCEDURE
8.5 EXPRESSION OF RESULTS
SECTION 9 BOND STRENGTH OF PVC FILM TEST
9.1 PRINCIPLE
9.2 TEST EQUIPMENT
9.3 TEST PIECES
9.4 PROCEDURE
9.5 EXPRESSION OF RESULTS
SECTION 10 HEAT RESISTANCE OF FILM TEST
10.1 PRINCIPLE
10.2 TEST EQUIPMENT
10.3 TEST PIECES
10.4 PROCEDURE
10.5 EXPRESSION OF RESULTS
SECTION 11 MOISTURE RESISTANCE OF FILMS TEST
11.1 PRINCIPLE
11.2 TEST EQUIPMENT
11.3 TEST PIECES
11.4 PROCEDURE
11.5 EXPRESSION OF RESULTS
SECTION 12 ADHESION OF PAPER FOILS TEST
12.1 PRINCIPLE
12.2 TEST EQUIPMENT
12.3 TEST PIECES
12.4 PROCEDURE
12.5 EXPRESSION OF RESULTS
SECTION 13 VENEER BOND STRENGTH TEST
13.1 PRINCIPLE
13.2 TEST EQUIPMENT
13.3 TEST PIECES
13.4 PROCEDURE
13.5 EXPRESSION OF RESULTS
SECTION 14 GLUE BOND DURABILITY TEST
14.1 PRINCIPLE
14.2 TEST EQUIPMENT
14.3 TEST PIECES
14.4 PROCEDURE
14.5 EXPRESSION OF RESULTS
Previous versions
AS/NZS 4266.2:2017
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.