AS/NZS 4249:2022
Electrical installations and safety practices – Film, video and television sites
Standard specifies the minimum safety and electrical installation requirements for the supply of electricity to appliances and equipment on limited‐duration film, video, photographic, audio and television sites and for the in‐service testing of portable and transportable equipment used on these installations.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$117.00 NZD
|
|
| HardCopy |
$130.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 4249:2022 Electrical installations and safety practices -- Film, video and television sites
Preface
Foreword
Section 1 Scope and general
1.1 Scope
1.1.1 General
1.1.2 Inclusions
1.1.3 Exclusions
1.2 Application
1.3 Normative references
1.4 Terms and definitions
1.5 Alterations and repairs
1.5.1 Alterations
1.5.2 Repairs
Section 2 Safety practices
2.1 Work health and safety
2.2 Production wiring
2.3 Electrical equipment and appliances
2.4 Equipment inspections and tests
2.4.1 Production wiring systems, equipment and accessories
2.4.2 Hired equipment and appliances
2.4.3 Imported equipment and appliances
2.5 Fire extinguishers
2.6 Liquids around electrical equipment
2.7 Notification of electrical hazards
2.8 Disconnection of power in adverse conditions
2.9 Clearance between mechanical equipment and overhead electric power lines
2.10 Hazardous areas
Section 3 Electrical installation requirements
3.1 General
3.2 Electrical supply
3.3 Supply from electrical installation
3.3.1 Confirmation of overcurrent and RCD protection
3.4 Additional protection by RCDs
3.4.1 RCD type
3.4.2 RCD requirements
3.5 Switchboards
3.6 Wiring systems
3.6.1 Connections
3.7 Electrical equipment and appliances
3.8 Imported electrical equipment and appliances
3.8.1 In Australia
3.8.2 In New Zealand
3.8.3 Conductor colour identification
3.9 Electrical equipment for use in damp situations
3.10 Production lighting
3.11 Lasers
Section 4 Verification
4.1 General
4.2 Initial verification
4.3 Periodic assessment
4.4 RCD testing
4.5 Documentation
Bibliography
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
AS/NZS 3002:2021 Electrical installations - Shows and carnival events
Electrical installations - Selection of cables - Part 1.1: Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions
Electrical installations - Selection of cables - Part 1.2: Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions
Electrical installations - Periodic verification
Approval and test specification - Cord extension sets
In-service safety inspection and testing of electrical equipment
Essential safety requirements for electrical equipment
Safe working on or near low-voltage electrical installations and equipment
Safety of laser products - Part 1: Equipment classification and requirements
Safety of laser products - Part 14: A user’s guide
Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)
Safety of laser products - Part 3: Guidance for laser displays and shows
Safety of laser products - Part 4: Laser guards
Related Information
Similar Standards
-
AS/NZS 3000:2018
Electrical installations - Known as the Australian/New Zealand Wiring Rules -
AS/NZS 3000:2018 A1
Electrical installations (known as the Australian/New Zealand Wiring Rules): Amendment 1 -
AS/NZS 3000:2018 A2
Electrical Installations (known as the Australian/New Zealand Wiring Rules)
-
AS/NZS 3000:2018 A3
Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 4249:2022 Electrical installations and safety practices -- Film, video and television sites
Preface
Foreword
Section 1 Scope and general
1.1 Scope
1.1.1 General
1.1.2 Inclusions
1.1.3 Exclusions
1.2 Application
1.3 Normative references
1.4 Terms and definitions
1.5 Alterations and repairs
1.5.1 Alterations
1.5.2 Repairs
Section 2 Safety practices
2.1 Work health and safety
2.2 Production wiring
2.3 Electrical equipment and appliances
2.4 Equipment inspections and tests
2.4.1 Production wiring systems, equipment and accessories
2.4.2 Hired equipment and appliances
2.4.3 Imported equipment and appliances
2.5 Fire extinguishers
2.6 Liquids around electrical equipment
2.7 Notification of electrical hazards
2.8 Disconnection of power in adverse conditions
2.9 Clearance between mechanical equipment and overhead electric power lines
2.10 Hazardous areas
Section 3 Electrical installation requirements
3.1 General
3.2 Electrical supply
3.3 Supply from electrical installation
3.3.1 Confirmation of overcurrent and RCD protection
3.4 Additional protection by RCDs
3.4.1 RCD type
3.4.2 RCD requirements
3.5 Switchboards
3.6 Wiring systems
3.6.1 Connections
3.7 Electrical equipment and appliances
3.8 Imported electrical equipment and appliances
3.8.1 In Australia
3.8.2 In New Zealand
3.8.3 Conductor colour identification
3.9 Electrical equipment for use in damp situations
3.10 Production lighting
3.11 Lasers
Section 4 Verification
4.1 General
4.2 Initial verification
4.3 Periodic assessment
4.4 RCD testing
4.5 Documentation
Bibliography
Previous versions
AS/NZS 4249:2022
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.