AS/NZS 4065:2010
Concrete utility services poles
Applies to concrete poles and their component parts which support any one of street lights, floodlights, aerial conductors, electromotive-transport conductors, traffic signals, communication equipment, or similar utility services, or any combination of these services.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$94.50 NZD
|
|
| HardCopy |
$105.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 4065:2010 CONCRETE UTILITY SERVICES POLES
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Along-line direction
1.4.2 Deflection
1.4.3 Failure
1.4.4 Load at the serviceability limit state
1.4.5 Load at the strength limit state
1.4.6 Straightness
1.4.7 Test load
1.4.8 Transverse direction
1.5 CLASSIFICATION
1.6 MARKING
1.6.1 General
1.6.2 Form of marking
1.7 PHYSICAL CHARACTERISTICS
1.7.1 General
1.7.2 Dimensions and ultimate loads
1.7.3 Structural test for poles
SECTION 2 GENERAL REQUIREMENTS
2.1 MATERIALS
2.1.1 General
2.1.2 Concrete
2.1.3 Reinforcement
2.1.4 Tendons and anchorages
2.1.5 Other components
2.2 DESIGN FOR STRENGTH AND SERVICEABILITY
2.3 MANUFACTURE
2.3.1 Formwork
2.3.2 Reinforcement and tendon placement
2.3.3 Casting
2.3.4 Protection and curing
2.3.5 Stressing of tendons and protection of tendons and anchorages
2.3.6 Surface finish
2.3.7 Tolerances
SECTION 3 PARTICULAR REQUIREMENTS
3.1 GENERAL
3.1.1 Compliance
3.1.2 Access barrier
3.1.3 Step bolt anchors
3.1.4 Provision of holes and ferrules
3.1.5 Galvanizing
3.1.6 Electrical requirements
3.1.7 Jointed poles
3.1.8 Handling and storage requirements
3.2 STREET LIGHTING POLES
3.2.1 Pole components
3.2.2 Electrical provisions
3.3 FLOODLIGHTING AND COMMUNICATION POLES
3.3.1 Pole components
3.3.2 Electrical provisions
3.3.3 Access for inspection or maintenance
3.4 AERIAL CONDUCTOR POLES
3.4.1 Pole components
3.4.2 Electrical earthing
3.4.3 Access for inspection and maintenance
3.5 TRAFFIC SIGNAL POLES
APPENDIX A - MEANS OF DEMONSTRATING COMPLIANCE WITH THIS STANDARD
A1 SCOPE
A2 STATISTICAL SAMPLING
A3 PRODUCT CERTIFICATION
A4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
A5 OTHER MEANS OF ASSESSMENT
APPENDIX B - REFERENCED DOCUMENTS
APPENDIX C - INFORMATION TO BE SUPPLIED BY PURCHASER
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Prestressing anchorages
Related Information
Similar Standards
-
AS/NZS 3725 Supplement 1:2007
Design for installation of buried concrete pipes – Commentary -
AS/NZS 3725:2007
Design for installation of buried concrete pipes
-
AS/NZS 4435.2:1999
Insulators - Composite for overhead power lines - Voltages greater than 1000 V a.c. - Standard strength classes and end fittings for string insulator units
-
AS/NZS 4456:2003 (Set)
Masonry units, segmental pavers and flags - Methods of test
AS/NZS 4065:2010 CONCRETE UTILITY SERVICES POLES
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Along-line direction
1.4.2 Deflection
1.4.3 Failure
1.4.4 Load at the serviceability limit state
1.4.5 Load at the strength limit state
1.4.6 Straightness
1.4.7 Test load
1.4.8 Transverse direction
1.5 CLASSIFICATION
1.6 MARKING
1.6.1 General
1.6.2 Form of marking
1.7 PHYSICAL CHARACTERISTICS
1.7.1 General
1.7.2 Dimensions and ultimate loads
1.7.3 Structural test for poles
SECTION 2 GENERAL REQUIREMENTS
2.1 MATERIALS
2.1.1 General
2.1.2 Concrete
2.1.3 Reinforcement
2.1.4 Tendons and anchorages
2.1.5 Other components
2.2 DESIGN FOR STRENGTH AND SERVICEABILITY
2.3 MANUFACTURE
2.3.1 Formwork
2.3.2 Reinforcement and tendon placement
2.3.3 Casting
2.3.4 Protection and curing
2.3.5 Stressing of tendons and protection of tendons and anchorages
2.3.6 Surface finish
2.3.7 Tolerances
SECTION 3 PARTICULAR REQUIREMENTS
3.1 GENERAL
3.1.1 Compliance
3.1.2 Access barrier
3.1.3 Step bolt anchors
3.1.4 Provision of holes and ferrules
3.1.5 Galvanizing
3.1.6 Electrical requirements
3.1.7 Jointed poles
3.1.8 Handling and storage requirements
3.2 STREET LIGHTING POLES
3.2.1 Pole components
3.2.2 Electrical provisions
3.3 FLOODLIGHTING AND COMMUNICATION POLES
3.3.1 Pole components
3.3.2 Electrical provisions
3.3.3 Access for inspection or maintenance
3.4 AERIAL CONDUCTOR POLES
3.4.1 Pole components
3.4.2 Electrical earthing
3.4.3 Access for inspection and maintenance
3.5 TRAFFIC SIGNAL POLES
APPENDIX A - MEANS OF DEMONSTRATING COMPLIANCE WITH THIS STANDARD
A1 SCOPE
A2 STATISTICAL SAMPLING
A3 PRODUCT CERTIFICATION
A4 SUPPLIER'S QUALITY MANAGEMENT SYSTEM
A5 OTHER MEANS OF ASSESSMENT
APPENDIX B - REFERENCED DOCUMENTS
APPENDIX C - INFORMATION TO BE SUPPLIED BY PURCHASER
Previous versions
AS/NZS 4065:2010
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.