AS/NZS 3695.2:2013
Wheelchairs - Part 2: Requirements and test methods for electrically powered wheelchairs (including mobility scooters)
Specifies requirements and test methods for electrically powered wheelchairs with a maximum speed not exceeding 15 km/h intended to carry one person of mass not greater than 300 kg. It includes manual wheelchairs with add-on power kits used for propulsion, and electrically powered wheelchairs (which includes scooters). It also specifies requirements and test methods for battery chargers for wheelchairs and scooters.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$171.90 NZD
|
|
| HardCopy |
$191.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 3695.2:2013 WHEELCHAIRS - REQUIREMENTS AND TEST METHODS FOR ELECTRICALLY POWERED WHEELCHAIRS (INCLUDING MOBILITY...
PREFACE
CONTENTS
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Audible warning device
3.2 Custom made wheelchair
3.3 Freewheel device
3.4 Loaded wheelchair
3.5 Maximum safe slope
3.6 Non-spillable battery
3.7 Occupant
3.8 Operator
3.9 Wheelchair
4 TEST APPARATUS, SET-UP AND ORDER OF TESTING
4.1 Test equipment
4.2 Test dummy
4.3 Set-up
4.4 Order of testing
5 TYPE CLASSES
6 GENERAL REQUIREMENTS
6.1 Risk analysis
6.2 Specific design and hazard management requirements
6.3 Measurement of overall dimensions, mass and turning parameters
7 DESIGN AND CONSTRUCTION REQUIREMENTS
7.1 Foot supports, lower leg supports and arm supports
7.2 Component mass
7.3 Pneumatic tyres
7.4 Anterior pelvic support
7.5 Braking systems
7.5.1 General requirements
7.5.2 Reliability of performance
7.6 Means for operating brakes
7.7 Freewheel device
7.7.1 General requirements
7.7.2 Protection from inadvertent activation
7.8 Operations intended to be carried out by the occupant and/or attendant
7.9 Seating design
7.10 Ground clearance
8 ELECTRICAL SYSTEMS-DESIGN AND REQUIREMENTS
8.1 General
8.2 Requirement for controller on-off switch
8.3 Requirement for power indicator
8.4 Circuit protection
8.5 Battery chargers
8.6 Charge level indicator
8.7 Charging connector
8.8 Batteries, battery enclosures and containers
8.8.1 Batteries
8.8.2 Battery enclosures and containers
8.9 Emergency stop input device
8.10 Lighting
8.11 Electronic programmable systems
8.12 Power and control systems ignition safety
9 PERFORMANCE REQUIREMENTS
9.1 Performance characteristics
9.1.1 General
9.1.2 Ability to climb maximum safe slope
9.1.3 Ground unevenness
9.1.4 Maximum downhill speed
9.1.5 Dynamic stability
9.1.6 Obstacle climbing
9.1.7 Static stability
9.1.8 Maximum speed
9.1.9 Distance range
9.2 Static, impact and fatigue strength
9.2.1 Requirements
9.2.2 Test
9.3 Brake performance testing
9.3.1 Test for determination of brake lever operating forces
9.3.2 Test for determination of the effectiveness of running brakes
9.3.3 Test for determination of effectiveness of parking brakes
9.3.4 Test for protrusion of parts of the parking brakes
9.3.5 Test for fatigue strength of manually operated parking brakes
9.3.6 Test for the determination of effectiveness of parking brakes after fatigue strength testing
9.4 Wheelchairs for use as seats in motor vehicles
9.5 Climatic performance
9.6 Foot support assembly and lower leg supports
9.6.1 Requirements
9.6.2 Test for foot support assembly and lower leg supports
9.7 Resistance to ignition
9.8 Seating adjustments for tilt and recline systems
10 INFORMATION DISCLOSURE REQUIREMENTS
10.1 General
10.2 Labelling
10.3 Pre-sale information
10.4 Operator information
10.5 Service information
11 TEST REPORT
APPENDIX A - OPERATIONS INTENDED TO BE CARRIED OUT BY THE OCCUPANT AND/OR ATTENDANT
A1 GENERAL
A2 OPERATING FORCES AND TORQUES
A2.1 General requirements
A2.2 Test method
A3 CONTROLS INTENDED FOR OPERATION BY THE OCCUPANT
A4 CONTROLS FOR ADJUSTING OCCUPIED SEATS
A5 CONTROLS TO BE OPERATED BY ATTENDANT
A6 ATTENDANT CONTROL UNIT, PUSH HANDLES AND HANDGRIPS
A6.1 Requirements
A6.2 Test method
APPENDIX B - DETERMINATION OF OVERALL AND MANOEUVRING DIMENSIONS
B1 GENERAL
B2 TEST METHODS
B3 CONSIDERATIONS FOR USE OF THE TECHNIQUES OF APPENDIX B
APPENDIX C - RECOMMENDED DESIGN FEATURES
C1 INTRODUCTION
C2 ANTI-TIP DEVICES
C3 COMPONENT MASS
C4 FITTINGS AND TOOLS
C5 TYRES
C6 MEANS TO INFLATE TYRES
C7 SURFACE TEMPERATURE
C8 SIDEWAYS TRANSFER OF OCCUPANT INTO OR OUT OF THE WHEELCHAIR
C9 RESISTANCE TO CONTAMINATION FROM URINE INCONTINENCE
C10 INDICATION FOR MAXIMUM SAFE SLOPE
C11 MIRRORS
C12 HEAD SUPPORT AND/OR HEAD RESTRAINT
C13 ACCIDENTAL OPERATION OF PARKING BRAKES
C14 PERFORMANCE CHARACTERISTICS
C14.1 Indication of electrical faults
C14.2 Batteries and their containers
C14.3 Control mechanism feedback
C14.4 Freewheel alarm
C14.5 Maximum speed
APPENDIX D - RECOMMENDED SEATING DESIGN
APPENDIX E - RECOMMENDATIONS FOR LIGHTING AND REFLECTORS
E1 GENERAL
E2 HEADLAMPS
E3 SIDE REFLECTORS
E4 REAR LAMPS
E5 REAR REFLECTORS
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Wheelchairs - Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs
Wheelchairs - Part 16: Resistance to ignition of postural support devices
Related Information
Similar Standards
-
AS/NZS 10542.1:2015
Technical systems and aids for people with disability - Wheelchair tiedown and occupant-restraint systems - Part 1: Requirements and test methods for all systems -
AS/NZS 3695.1:2011
Wheelchairs - Part 1: Requirements and test methods for manual wheelchairs -
AS/NZS 3695.2:2013 Ruling 1
Wheelchairs - Part 2: Requirements and test methods for electrically powered wheelchairs (including mobility scooters)(Ruling 1 to AS/NZS 3695.2) -
AS/NZS 3696.19:2009
Wheelchairs - Wheeled mobility devices for use as seats in motor vehicles
AS/NZS 3695.2:2013 WHEELCHAIRS - REQUIREMENTS AND TEST METHODS FOR ELECTRICALLY POWERED WHEELCHAIRS (INCLUDING MOBILITY...
PREFACE
CONTENTS
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Audible warning device
3.2 Custom made wheelchair
3.3 Freewheel device
3.4 Loaded wheelchair
3.5 Maximum safe slope
3.6 Non-spillable battery
3.7 Occupant
3.8 Operator
3.9 Wheelchair
4 TEST APPARATUS, SET-UP AND ORDER OF TESTING
4.1 Test equipment
4.2 Test dummy
4.3 Set-up
4.4 Order of testing
5 TYPE CLASSES
6 GENERAL REQUIREMENTS
6.1 Risk analysis
6.2 Specific design and hazard management requirements
6.3 Measurement of overall dimensions, mass and turning parameters
7 DESIGN AND CONSTRUCTION REQUIREMENTS
7.1 Foot supports, lower leg supports and arm supports
7.2 Component mass
7.3 Pneumatic tyres
7.4 Anterior pelvic support
7.5 Braking systems
7.5.1 General requirements
7.5.2 Reliability of performance
7.6 Means for operating brakes
7.7 Freewheel device
7.7.1 General requirements
7.7.2 Protection from inadvertent activation
7.8 Operations intended to be carried out by the occupant and/or attendant
7.9 Seating design
7.10 Ground clearance
8 ELECTRICAL SYSTEMS-DESIGN AND REQUIREMENTS
8.1 General
8.2 Requirement for controller on-off switch
8.3 Requirement for power indicator
8.4 Circuit protection
8.5 Battery chargers
8.6 Charge level indicator
8.7 Charging connector
8.8 Batteries, battery enclosures and containers
8.8.1 Batteries
8.8.2 Battery enclosures and containers
8.9 Emergency stop input device
8.10 Lighting
8.11 Electronic programmable systems
8.12 Power and control systems ignition safety
9 PERFORMANCE REQUIREMENTS
9.1 Performance characteristics
9.1.1 General
9.1.2 Ability to climb maximum safe slope
9.1.3 Ground unevenness
9.1.4 Maximum downhill speed
9.1.5 Dynamic stability
9.1.6 Obstacle climbing
9.1.7 Static stability
9.1.8 Maximum speed
9.1.9 Distance range
9.2 Static, impact and fatigue strength
9.2.1 Requirements
9.2.2 Test
9.3 Brake performance testing
9.3.1 Test for determination of brake lever operating forces
9.3.2 Test for determination of the effectiveness of running brakes
9.3.3 Test for determination of effectiveness of parking brakes
9.3.4 Test for protrusion of parts of the parking brakes
9.3.5 Test for fatigue strength of manually operated parking brakes
9.3.6 Test for the determination of effectiveness of parking brakes after fatigue strength testing
9.4 Wheelchairs for use as seats in motor vehicles
9.5 Climatic performance
9.6 Foot support assembly and lower leg supports
9.6.1 Requirements
9.6.2 Test for foot support assembly and lower leg supports
9.7 Resistance to ignition
9.8 Seating adjustments for tilt and recline systems
10 INFORMATION DISCLOSURE REQUIREMENTS
10.1 General
10.2 Labelling
10.3 Pre-sale information
10.4 Operator information
10.5 Service information
11 TEST REPORT
APPENDIX A - OPERATIONS INTENDED TO BE CARRIED OUT BY THE OCCUPANT AND/OR ATTENDANT
A1 GENERAL
A2 OPERATING FORCES AND TORQUES
A2.1 General requirements
A2.2 Test method
A3 CONTROLS INTENDED FOR OPERATION BY THE OCCUPANT
A4 CONTROLS FOR ADJUSTING OCCUPIED SEATS
A5 CONTROLS TO BE OPERATED BY ATTENDANT
A6 ATTENDANT CONTROL UNIT, PUSH HANDLES AND HANDGRIPS
A6.1 Requirements
A6.2 Test method
APPENDIX B - DETERMINATION OF OVERALL AND MANOEUVRING DIMENSIONS
B1 GENERAL
B2 TEST METHODS
B3 CONSIDERATIONS FOR USE OF THE TECHNIQUES OF APPENDIX B
APPENDIX C - RECOMMENDED DESIGN FEATURES
C1 INTRODUCTION
C2 ANTI-TIP DEVICES
C3 COMPONENT MASS
C4 FITTINGS AND TOOLS
C5 TYRES
C6 MEANS TO INFLATE TYRES
C7 SURFACE TEMPERATURE
C8 SIDEWAYS TRANSFER OF OCCUPANT INTO OR OUT OF THE WHEELCHAIR
C9 RESISTANCE TO CONTAMINATION FROM URINE INCONTINENCE
C10 INDICATION FOR MAXIMUM SAFE SLOPE
C11 MIRRORS
C12 HEAD SUPPORT AND/OR HEAD RESTRAINT
C13 ACCIDENTAL OPERATION OF PARKING BRAKES
C14 PERFORMANCE CHARACTERISTICS
C14.1 Indication of electrical faults
C14.2 Batteries and their containers
C14.3 Control mechanism feedback
C14.4 Freewheel alarm
C14.5 Maximum speed
APPENDIX D - RECOMMENDED SEATING DESIGN
APPENDIX E - RECOMMENDATIONS FOR LIGHTING AND REFLECTORS
E1 GENERAL
E2 HEADLAMPS
E3 SIDE REFLECTORS
E4 REAR LAMPS
E5 REAR REFLECTORS
AS/NZS 3695.2:2013
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.