AS/NZS 3580.11.1:2013
Methods for sampling and analysis of ambient air - Method 11.1: Determination of methane and non-methane organic compounds in ambient air - Direct-reading instrumental method
Sets out a method for determining methane and non-methane organic compounds in ambient air using a direct-reading instrument. The method applies to the determination of hydrocarbons in ambient air within the concentration range 0 to 20 p.p.m.C. by volume.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$108.90 NZD
|
|
| HardCopy |
$121.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 3580.11.1:2013 METHODS FOR SAMPLING AND ANALYSIS OF AMBIENT AIR - DETERMINATION OF METHANE AND NON-METHANE...
PREFACE
FOREWORD
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Full scale (FS)
3.2 Level 1 calibration
3.3 Level 2 calibration
3.4 Linearity
3.5 Lower detectable limit
3.6 Noise
3.7 Parts per billion (p.p.b.)
3.8 Parts per million (p.p.m.)
3.9 Parts per million carbon (p.p.m.C.)
3.10 Precision
3.11 Proficiency audit
3.12 Range
3.13 Rise time
3.14 Span drift
3.15 Test atmosphere
3.16 U95
3.17 Zero drift
4 PRINCIPLE
5 APPARATUS
5.1 Instrument
5.2 Zero air
5.3 Hydrogen
5.4 Carrier gas
5.5 Reference test atmosphere
5.6 Level 1 span and zero calibrations
5.7 Level 1 span and zero checks
5.8 Level 2 span and zero checks
6 SAMPLING
6.1 Location
6.2 Sampling train
6.3 Sampling environment
7 PROCEDURE
7.1 Instrument calibration
7.1.1 General
7.1.2 Span and zero calibration
7.1.3 Multipoint precision check
7.1.4 Operational precision checks
7.1.5 Operational recalibration
7.2 Instrument operation
8 CALCULATION AND EXPRESSION OF RESULTS
9 MEASUREMENT UNCERTAINTY
10 QUALITY CONTROL AND ASSURANCE
10.1 Instrument and station log
10.2 Proficiency audits
10.3 Data acquisition and transfer
10.4 Data validation
11 TEST REPORT
PREFACE
FOREWORD
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Full scale (FS)
3.2 Level 1 calibration
3.3 Level 2 calibration
3.4 Linearity
3.5 Lower detectable limit
3.6 Noise
3.7 Parts per billion (p.p.b.)
3.8 Parts per million (p.p.m.)
3.9 Parts per million carbon (p.p.m.C.)
3.10 Precision
3.11 Proficiency audit
3.12 Range
3.13 Rise time
3.14 Span drift
3.15 Test atmosphere
3.16 U95
3.17 Zero drift
4 PRINCIPLE
5 APPARATUS
5.1 Instrument
5.2 Zero air
5.3 Hydrogen
5.4 Carrier gas
5.5 Reference test atmosphere
5.6 Level 1 span and zero calibrations
5.7 Level 1 span and zero checks
5.8 Level 2 span and zero checks
6 SAMPLING
6.1 Location
6.2 Sampling train
6.3 Sampling environment
7 PROCEDURE
7.1 Instrument calibration
7.1.1 General
7.1.2 Span and zero calibration
7.1.3 Multipoint precision check
7.1.4 Operational precision checks
7.1.5 Operational recalibration
7.2 Instrument operation
8 CALCULATION AND EXPRESSION OF RESULTS
9 MEASUREMENT UNCERTAINTY
10 QUALITY CONTROL AND ASSURANCE
10.1 Instrument and station log
10.2 Proficiency audits
10.3 Data acquisition and transfer
10.4 Data validation
11 TEST REPORT
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 3580.1.1:2016
Methods for sampling and analysis of ambient air - Guide to siting air monitoring equipment -
AS/NZS 3580.10.1:2016
Methods for sampling and analysis of ambient air - Method 10.1: Determination of particulate matter - Deposited matter - Gravimetric method -
AS/NZS 3580.10.2:2013
Methods for sampling and analysis of ambient air - Method 10.2: Determination of particulate matter - Impinged matter - Gravimetric method -
AS/NZS 3580.11.1:2013 A1
Methods for sampling and analysis of ambient air - Method 11.1: Determination of methane and non-methane organic compounds in ambient air - Direct-reading instrumental method - Amendment 1:2016
AS/NZS 3580.11.1:2013 METHODS FOR SAMPLING AND ANALYSIS OF AMBIENT AIR - DETERMINATION OF METHANE AND NON-METHANE...
PREFACE
FOREWORD
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Full scale (FS)
3.2 Level 1 calibration
3.3 Level 2 calibration
3.4 Linearity
3.5 Lower detectable limit
3.6 Noise
3.7 Parts per billion (p.p.b.)
3.8 Parts per million (p.p.m.)
3.9 Parts per million carbon (p.p.m.C.)
3.10 Precision
3.11 Proficiency audit
3.12 Range
3.13 Rise time
3.14 Span drift
3.15 Test atmosphere
3.16 U95
3.17 Zero drift
4 PRINCIPLE
5 APPARATUS
5.1 Instrument
5.2 Zero air
5.3 Hydrogen
5.4 Carrier gas
5.5 Reference test atmosphere
5.6 Level 1 span and zero calibrations
5.7 Level 1 span and zero checks
5.8 Level 2 span and zero checks
6 SAMPLING
6.1 Location
6.2 Sampling train
6.3 Sampling environment
7 PROCEDURE
7.1 Instrument calibration
7.1.1 General
7.1.2 Span and zero calibration
7.1.3 Multipoint precision check
7.1.4 Operational precision checks
7.1.5 Operational recalibration
7.2 Instrument operation
8 CALCULATION AND EXPRESSION OF RESULTS
9 MEASUREMENT UNCERTAINTY
10 QUALITY CONTROL AND ASSURANCE
10.1 Instrument and station log
10.2 Proficiency audits
10.3 Data acquisition and transfer
10.4 Data validation
11 TEST REPORT
PREFACE
FOREWORD
1 SCOPE
2 REFERENCED DOCUMENTS
3 DEFINITIONS
3.1 Full scale (FS)
3.2 Level 1 calibration
3.3 Level 2 calibration
3.4 Linearity
3.5 Lower detectable limit
3.6 Noise
3.7 Parts per billion (p.p.b.)
3.8 Parts per million (p.p.m.)
3.9 Parts per million carbon (p.p.m.C.)
3.10 Precision
3.11 Proficiency audit
3.12 Range
3.13 Rise time
3.14 Span drift
3.15 Test atmosphere
3.16 U95
3.17 Zero drift
4 PRINCIPLE
5 APPARATUS
5.1 Instrument
5.2 Zero air
5.3 Hydrogen
5.4 Carrier gas
5.5 Reference test atmosphere
5.6 Level 1 span and zero calibrations
5.7 Level 1 span and zero checks
5.8 Level 2 span and zero checks
6 SAMPLING
6.1 Location
6.2 Sampling train
6.3 Sampling environment
7 PROCEDURE
7.1 Instrument calibration
7.1.1 General
7.1.2 Span and zero calibration
7.1.3 Multipoint precision check
7.1.4 Operational precision checks
7.1.5 Operational recalibration
7.2 Instrument operation
8 CALCULATION AND EXPRESSION OF RESULTS
9 MEASUREMENT UNCERTAINTY
10 QUALITY CONTROL AND ASSURANCE
10.1 Instrument and station log
10.2 Proficiency audits
10.3 Data acquisition and transfer
10.4 Data validation
11 TEST REPORT
AS/NZS 3580.11.1:2013
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.