AS/NZS 2918:2001
Domestic solid fuel burning appliances - Installation
Specifies requirements for appliance and flue installation for solid fuel burning appliances in dwellings. Sets out alternative means of compliance via performance testing of a prototype installation or the use of prescriptive criteria (dimension, materials, etc) based on a worst case situation.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$186.30 NZD
|
|
| HardCopy |
$207.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 2918:2001 DOMESTIC SOLID FUEL BURNING APPLIANCES-INSTALLATION
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 APPLICATION
1.4 REFERENCED DOCUMENTS
1.5 DEFINITIONS
1.5.1 Appliance
1.5.2 Approved
1.5.3 Attic (Attic storey)
1.5.4 Built-in appliance
1.5.5 Central heating appliance
1.5.6 Clearance
1.5.7 Firebox
1.5.8 Firebricks
1.5.9 Fireplace
1.5.10 Fireplace insert appliance
1.5.11 Floor protector
1.5.12 Flue
1.5.13 Flue guard
1.5.14 Flue pipe
1.5.15 Flue-pipe casing
1.5.16 Flue mounted shield
1.5.17 Flue system
1.5.18 Freestanding appliance
1.5.19 Fuel chamber
1.5.20 Hearth
1.5.21 Heat-resistant material
1.5.22 Heat-sensitive material
1.5.23 Heat-tolerant material
1.5.24 Heat shield
1.5.25 Installer
1.5.26 Mantelpiece
1.5.27 Mantelshelf
1.5.28 Masonry
1.5.29 Masonry chimney
1.5.30 Masonry enclosure
1.5.31 Masonry fireplace
1.5.32 Masonry recess
1.5.33 Open-vented hot-water system
1.5.34 Penetrations
1.5.35 Regulatory authority
1.5.36 Shall
1.5.37 Should
1.5.38 Tempering valve
1.5.39 Thermal resistance
SECTION 2 MATERIALS
2.1 MATERIAL SERVICE TEMPERATURE
2.2 FLOOR PROTECTOR MATERIALS
2.3 FLUE SYSTEM
2.4 FLUE-PIPE CASINGS
SECTION 3 APPLIANCE INSTALLATION
3.1 GENERAL
3.2 CLEARANCES AND HEAT SHIELDING
3.2.1 Access clearances
3.2.2 Safety clearance
3.2.3 Heat shield
3.2.4 Reduced safety clearances for heat shield constructions
3.3 FLOOR PROTECTOR
3.3.1 General requirements
3.3.2 Performance and construction requirements for a floor protector where a sample installation (or prototype installation) has been tested
3.3.3 Construction requirements for a floor protector where a sample appliance installation (or prototype appliance installation) has not been tested
3.3.4 Decorative finishing
3.3.5 Design load capacity
3.4 PARTICULAR REQUIREMENTS FOR FIREPLACE INSERT AND BUILT-IN APPLIANCES
3.4.1 Fireplace insert appliances
3.4.2 Built-in appliance installations
3.4.3 Freestanding installations installed in fireplaces or masonry enclosures
3.5 STABILITY
3.6 WATER CONNECTIONS
3.7 ELECTRICAL CONNECTIONS
3.8 SEISMIC RESTRAINT
SECTION 4 FLUE SYSTEM INSTALLATION
4.1 GENERAL REQUIREMENTS
4.2 FLUE PIPES
4.3 FLUE-PIPE CASINGS
4.4 WALL PENETRATION
4.5 FLUES WITHIN ROOMS AND SIMILAR AREAS
4.5.1 Safety clearance
4.5.2 Heat shield
4.5.3 Guarding
4.6 FLUES PENETRATING CEILINGS, FLOORS AND WALL
4.6.1 General
4.6.2 Tested penetrations
4.6.3 Untested penetrations
4.6.4 Shielding plate clearance
4.7 FLUES WITHIN ATTIC SPACES
4.8 ROOF PENETRATION
4.8.1 General
4.8.2 Flashing
4.9 EXTERNAL REQUIREMENTS
4.9.1 General
4.9.2 Additional requirements for flue systems adjacent to external walls
4.10 FIXING
4.11 FLUE PIPES IN CHIMNEYS
4.12 FLUE DAMPERS
SECTION 5 MODIFICATIONS AND VARIATIONS
5.1 APPLIANCE MODIFICATIONS
5.2 APPLIANCE VARIATION
SECTION 6 INSTALLATION AND OPERATING INSTRUCTIONS
6.1 GENERAL
6.2 INSTALLATION INSTRUCTIONS
6.3 OPERATING AND MAINTENANCE INSTRUCTIONS
6.3.1 General
6.3.2 Operating and maintenance instructions
6.4 ADDITIONAL OPERATING INSTRUCTIONS FOR APPLIANCES UTILIZING CATALYTIC COMBUSTORS
6.5 REPLACEMENT OF COMBUSTOR KIT
SECTION 7 ADDITIONAL REQUIREMENTS
7.1 VENTILATION
7.2 WATER HEATING EQUIPMENT
7.3 EMISSION LIMITS
APPENDIX A - EVALUATION OF HEAT SHIELD CLEARANCE FACTORS
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 PREPARATION
A5 PROCEDURE
A6 REPORT
APPENDIX B - THERMAL TESTING OF INSTALLATION CLEARANCES
B1 SCOPE
B2 PRINCIPLE
B3 TEST ROOM
B4 APPLIANCE SPECIFICATION
B5 APPARATUS
B6 TEST ENCLOSURE
B7 TEST FUEL
B8 PREPARATION
B9 PROCEDURE
B9.1 High fire procedure
B9.2 Flash fire procedure
B10 MAXIMUM ALLOWABLE TEMPERATURE RISES
B11 REPORT
APPENDIX C - DETERMINATION OF THE MATERIAL SERVICE TEMPERATURE FOR SHIELDING AND INSULATING MATERIALS
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 PREPARATION
C5 PROCEDURE
C6 REPORT
APPENDIX D - THERMAL TESTING OF A FLOOR PROTECTOR
D1 SCOPE
D2 PRINCIPLE
D3 TEST ROOM
D4 FLOOR PROTECTOR
D5 APPARATUS
D6 TEST FLOOR
D7 PROCEDURE
D7.1 Test 1
D7.2 Test 2
D8 REQUIREMENT
D9 REPORT
APPENDIX E - THERMAL TESTING OF FIREPLACE INSERT INSTALLATIONS
E1 SCOPE
E2 PRINCIPLE
E3 TEST ROOM
E4 APPLIANCE SPECIFICATION
E5 APPARATUS
E6 TEST STRUCTURE
E7 TEST FUEL
E8 TEMPERATURE MEASUREMENTS
E9 MAXIMUM TEMPERATURE
E10 ALLOWABLE TEMPERATURE
E11 PREPARATION
E12 APPLIANCE INSTALLATION
E13 TEST PROCEDURE
E13.1 High fire procedure
E13.2 Flash fire procedure
E14 REPORT
APPENDIX F - THERMAL TESTING OF FLUE SYSTEMS AND FLUE-SYSTEM CLEARANCES
F1 SCOPE
F2 PRINCIPLE
F3 TEST ROOM
F4 FLUE-SYSTEM SPECIFICATION
F5 APPARATUS
F6 TEST STRUCTURE
F7 PREPARATION
F8 PROCEDURE
F8.1 Hot flue test
F8.2 Flue fire test
F8.3 Structural integrity test
F9 MAXIMUM ALLOWABLE TEMPERATURE RISES
F10 REPORT
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Domestic solid fuel burning appliances - Method for determination of power output and efficiency
Related Information
Building Code Compliance Document B1
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS3
Citation context:Building Code Compliance Document C
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1, AS2, VM1
Citation context:Building Code Compliance Document SH
Ministry: Ministry of Business, Innovation, and Employment - Building Systems Performance (BSP)
Section: AS1
Citation context:Similar Standards
-
AS/NZS 2918:2018
Domestic solid fuel burning appliances - Installation -
AS/NZS 3869:1999
Domestic solid fuel burning appliances - Design and construction
-
AS/NZS 4012:2014
Domestic solid fuel burning appliances - Method for determination of power output and efficiency -
AS/NZS 4012:2014 A1
Domestic solid fuel burning appliances - Method for determination of power output and efficiency: Amendment 1:2015
AS/NZS 2918:2001 DOMESTIC SOLID FUEL BURNING APPLIANCES-INSTALLATION
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 APPLICATION
1.4 REFERENCED DOCUMENTS
1.5 DEFINITIONS
1.5.1 Appliance
1.5.2 Approved
1.5.3 Attic (Attic storey)
1.5.4 Built-in appliance
1.5.5 Central heating appliance
1.5.6 Clearance
1.5.7 Firebox
1.5.8 Firebricks
1.5.9 Fireplace
1.5.10 Fireplace insert appliance
1.5.11 Floor protector
1.5.12 Flue
1.5.13 Flue guard
1.5.14 Flue pipe
1.5.15 Flue-pipe casing
1.5.16 Flue mounted shield
1.5.17 Flue system
1.5.18 Freestanding appliance
1.5.19 Fuel chamber
1.5.20 Hearth
1.5.21 Heat-resistant material
1.5.22 Heat-sensitive material
1.5.23 Heat-tolerant material
1.5.24 Heat shield
1.5.25 Installer
1.5.26 Mantelpiece
1.5.27 Mantelshelf
1.5.28 Masonry
1.5.29 Masonry chimney
1.5.30 Masonry enclosure
1.5.31 Masonry fireplace
1.5.32 Masonry recess
1.5.33 Open-vented hot-water system
1.5.34 Penetrations
1.5.35 Regulatory authority
1.5.36 Shall
1.5.37 Should
1.5.38 Tempering valve
1.5.39 Thermal resistance
SECTION 2 MATERIALS
2.1 MATERIAL SERVICE TEMPERATURE
2.2 FLOOR PROTECTOR MATERIALS
2.3 FLUE SYSTEM
2.4 FLUE-PIPE CASINGS
SECTION 3 APPLIANCE INSTALLATION
3.1 GENERAL
3.2 CLEARANCES AND HEAT SHIELDING
3.2.1 Access clearances
3.2.2 Safety clearance
3.2.3 Heat shield
3.2.4 Reduced safety clearances for heat shield constructions
3.3 FLOOR PROTECTOR
3.3.1 General requirements
3.3.2 Performance and construction requirements for a floor protector where a sample installation (or prototype installation) has been tested
3.3.3 Construction requirements for a floor protector where a sample appliance installation (or prototype appliance installation) has not been tested
3.3.4 Decorative finishing
3.3.5 Design load capacity
3.4 PARTICULAR REQUIREMENTS FOR FIREPLACE INSERT AND BUILT-IN APPLIANCES
3.4.1 Fireplace insert appliances
3.4.2 Built-in appliance installations
3.4.3 Freestanding installations installed in fireplaces or masonry enclosures
3.5 STABILITY
3.6 WATER CONNECTIONS
3.7 ELECTRICAL CONNECTIONS
3.8 SEISMIC RESTRAINT
SECTION 4 FLUE SYSTEM INSTALLATION
4.1 GENERAL REQUIREMENTS
4.2 FLUE PIPES
4.3 FLUE-PIPE CASINGS
4.4 WALL PENETRATION
4.5 FLUES WITHIN ROOMS AND SIMILAR AREAS
4.5.1 Safety clearance
4.5.2 Heat shield
4.5.3 Guarding
4.6 FLUES PENETRATING CEILINGS, FLOORS AND WALL
4.6.1 General
4.6.2 Tested penetrations
4.6.3 Untested penetrations
4.6.4 Shielding plate clearance
4.7 FLUES WITHIN ATTIC SPACES
4.8 ROOF PENETRATION
4.8.1 General
4.8.2 Flashing
4.9 EXTERNAL REQUIREMENTS
4.9.1 General
4.9.2 Additional requirements for flue systems adjacent to external walls
4.10 FIXING
4.11 FLUE PIPES IN CHIMNEYS
4.12 FLUE DAMPERS
SECTION 5 MODIFICATIONS AND VARIATIONS
5.1 APPLIANCE MODIFICATIONS
5.2 APPLIANCE VARIATION
SECTION 6 INSTALLATION AND OPERATING INSTRUCTIONS
6.1 GENERAL
6.2 INSTALLATION INSTRUCTIONS
6.3 OPERATING AND MAINTENANCE INSTRUCTIONS
6.3.1 General
6.3.2 Operating and maintenance instructions
6.4 ADDITIONAL OPERATING INSTRUCTIONS FOR APPLIANCES UTILIZING CATALYTIC COMBUSTORS
6.5 REPLACEMENT OF COMBUSTOR KIT
SECTION 7 ADDITIONAL REQUIREMENTS
7.1 VENTILATION
7.2 WATER HEATING EQUIPMENT
7.3 EMISSION LIMITS
APPENDIX A - EVALUATION OF HEAT SHIELD CLEARANCE FACTORS
A1 SCOPE
A2 PRINCIPLE
A3 APPARATUS
A4 PREPARATION
A5 PROCEDURE
A6 REPORT
APPENDIX B - THERMAL TESTING OF INSTALLATION CLEARANCES
B1 SCOPE
B2 PRINCIPLE
B3 TEST ROOM
B4 APPLIANCE SPECIFICATION
B5 APPARATUS
B6 TEST ENCLOSURE
B7 TEST FUEL
B8 PREPARATION
B9 PROCEDURE
B9.1 High fire procedure
B9.2 Flash fire procedure
B10 MAXIMUM ALLOWABLE TEMPERATURE RISES
B11 REPORT
APPENDIX C - DETERMINATION OF THE MATERIAL SERVICE TEMPERATURE FOR SHIELDING AND INSULATING MATERIALS
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C4 PREPARATION
C5 PROCEDURE
C6 REPORT
APPENDIX D - THERMAL TESTING OF A FLOOR PROTECTOR
D1 SCOPE
D2 PRINCIPLE
D3 TEST ROOM
D4 FLOOR PROTECTOR
D5 APPARATUS
D6 TEST FLOOR
D7 PROCEDURE
D7.1 Test 1
D7.2 Test 2
D8 REQUIREMENT
D9 REPORT
APPENDIX E - THERMAL TESTING OF FIREPLACE INSERT INSTALLATIONS
E1 SCOPE
E2 PRINCIPLE
E3 TEST ROOM
E4 APPLIANCE SPECIFICATION
E5 APPARATUS
E6 TEST STRUCTURE
E7 TEST FUEL
E8 TEMPERATURE MEASUREMENTS
E9 MAXIMUM TEMPERATURE
E10 ALLOWABLE TEMPERATURE
E11 PREPARATION
E12 APPLIANCE INSTALLATION
E13 TEST PROCEDURE
E13.1 High fire procedure
E13.2 Flash fire procedure
E14 REPORT
APPENDIX F - THERMAL TESTING OF FLUE SYSTEMS AND FLUE-SYSTEM CLEARANCES
F1 SCOPE
F2 PRINCIPLE
F3 TEST ROOM
F4 FLUE-SYSTEM SPECIFICATION
F5 APPARATUS
F6 TEST STRUCTURE
F7 PREPARATION
F8 PROCEDURE
F8.1 Hot flue test
F8.2 Flue fire test
F8.3 Structural integrity test
F9 MAXIMUM ALLOWABLE TEMPERATURE RISES
F10 REPORT
Previous versions
AS/NZS 2918:2001
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.