AS/NZS 2554:1998
Hose and hose assemblies for air
Specifies requirements for hose and hose assemblies for use with compressed air, and having maximum working pressures of up to 2.5 MPa.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$63.00 NZD
|
|
| HardCopy |
$70.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 2554:1998 HOSE AND HOSE ASSEMBLIES FOR AIR
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL REQUIREMENTS
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 May
1.3.2 Shall
1.3.3 Should
1.4 CLASSIFICATION AND DESIGNATION
1.4.1 Classification
1.4.2 Designation
1.5 CONSTRUCTION
1.6 DIMENSIONS AND TOLERANCES
1.6.1 Internal diameters and component thicknesses
1.6.2 Length of hose
1.6.3 Bore
1.7 HOSE FITTINGS
1.8 COLOUR
1.9 MARKING
SECTION 2 PERFORMANCE REQUIREMENTS
2.1 ADHESION
2.2 HYDROSTATIC PRESSURE TESTS
2.2.1 Proof pressure
2.2.2 Burst pressure
2.2.3 Change-in-length
2.2.4 Expansion and distortion
2.3 ABRASION RESISTANCE
2.4 LOW TEMPERATURE FLEXIBILITY
2.5 RESISTANCE TO OIL
2.6 RESISTANCE TO OZONE
2.7 HOSE AND COUPLING COMPATIBILITY
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
APPENDIX B - METHOD FOR DETERMINING LOW TEMPERATURE FLEXIBILITY OF HOSE
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 TEST SPECIMEN
B5 PROCEDURE
B6 REPORT
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 1869:2012
Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas -
BS 1103:1989
Specification for fabrics for the reinforcement of rubber hoses
-
BS 4089:1999
Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
-
BS 5122:1986
Specification for rubber hoses for low-pressure and medium-pressure saturated steam
AS/NZS 2554:1998 HOSE AND HOSE ASSEMBLIES FOR AIR
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL REQUIREMENTS
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
1.3.1 May
1.3.2 Shall
1.3.3 Should
1.4 CLASSIFICATION AND DESIGNATION
1.4.1 Classification
1.4.2 Designation
1.5 CONSTRUCTION
1.6 DIMENSIONS AND TOLERANCES
1.6.1 Internal diameters and component thicknesses
1.6.2 Length of hose
1.6.3 Bore
1.7 HOSE FITTINGS
1.8 COLOUR
1.9 MARKING
SECTION 2 PERFORMANCE REQUIREMENTS
2.1 ADHESION
2.2 HYDROSTATIC PRESSURE TESTS
2.2.1 Proof pressure
2.2.2 Burst pressure
2.2.3 Change-in-length
2.2.4 Expansion and distortion
2.3 ABRASION RESISTANCE
2.4 LOW TEMPERATURE FLEXIBILITY
2.5 RESISTANCE TO OIL
2.6 RESISTANCE TO OZONE
2.7 HOSE AND COUPLING COMPATIBILITY
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
APPENDIX B - METHOD FOR DETERMINING LOW TEMPERATURE FLEXIBILITY OF HOSE
B1 SCOPE
B2 PRINCIPLE
B3 APPARATUS
B4 TEST SPECIMEN
B5 PROCEDURE
B6 REPORT
AS/NZS 2554:1998
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.