AS/NZS 2442.1:1996
Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance
Specifies the method for determining performance characteristics, including moisture removal, maximum fabric temperature and water and energy usage. It sets out minimum acceptable values for some of these characteristics but does not specify safety requirements. Appendices include specification of the standard test load, required laboratory and equipment conditions and result recording sheets.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$77.40 NZD
|
|
| HardCopy |
$86.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2442.1:1996 PERFORMANCE OF HOUSEHOLD ELECTRICAL APPLIANCES-ROTARY CLOTHES DRYERS - ENERGY CONSUMPTION AND PERFORMANCE
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Bone-dry load items
1.4.2 Cool-down period
1.4.3 Dryer control mechanisms
1.4.4 Dryer types
1.4.5 Rated capacity
1.4.6 Statements of intention
1.4.7 Tested energy performance (TEP)
SECTION 2 MEASUREMENTS TO BE PERFORMED AND REQUIREMENTS OF TESTING
2.1 GENERAL
2.2 DETERMINATION OF MOISTURE REMOVAL
2.3 DETERMINATION OF MAXIMUM FABRIC TEMPERATURE
2.4 PREPARATION OF STANDARD TEST LOADS
2.5 TEST CONDITIONS
2.6 RECORDING OF RESULTS
SECTION 3 CONDITIONS FOR MEASUREMENT
3.1 GENERAL
3.2 CONDITION AND INSTALLATION OF MACHINE
3.3 LINT TRAP
3.4 EXHAUST
3.4.1 General
3.4.2 Dryers requiring exhaust duct
3.4.3 Dryers with optional exhaust duct
3.4.4 Dryers without exhaust duct
3.4.5 Recording
3.5 PROGRAM SETTINGS
3.6 INITIAL TEMPERATURE OF MACHINE
3.7 METHOD OF LOADING
SECTION 4 PERFORMANCE REQUIREMENTS
4.1 GENERAL
4.2 DRYING CLOTHES IN A SINGLE OPERATION
4.3 MAXIMUM FABRIC TEMPERATURE
4.4 MAXIMUM TESTED ENERGY PERFORMANCE
APPENDIX A - DETERMINATION OF MOISTURE REMOVAL AND ENERGY CONSUMPTION OF MANUAL AND TIMER DRYERS- DRAINED CONDENSER AND...
A1 SCOPE
A2 TEST CONDITIONS
A2.1 General
A2.2 Equipment
A2.3 Standard test load
A2.4 Drying cycle
A3 TEST METHOD
A3.1 Summary
A3.2 Variations to the stated test procedure
A3.3 Test procedure
A3.4 Test run validity
A3.5 Trial runs
A3.6 Optional additional measurements
APPENDIX B - DETERMINATION OF MOISTURE REMOVAL AND ENERGY CONSUMPTION OF AUTOSENSING DRYER-ALL TYPES
B1 SCOPE
B2 TEST CONDITIONS
B2.1 General
B2.2 Equipment
B2.3 Standard test load
B2.4 Drying cycle
B3 TEST METHOD
B3.1 Summary
B3.2 Test Procedures
B3.3 Other methods for establishing final cool-down (not applicable to undrained condenser type dryers)
B3.4 Test run validity
B3.5 Trial runs
APPENDIX C - DETERMINATION OF MOISTURE REMOVAL AND ENERGY CONSUMPTION OF MANUAL AND TIMER DRYERS- NON-DRAINABLE...
C1 SCOPE
C2 TEST CONDITIONS
C2.1 General
C2.2 Equipment
C2.3 Standard test load
C2.4 Drying cycle
C3 TEST METHOD
C3.1 Summary
C3.2 Test procedure
C3.3 Test run validity
C3.4 Trial runs
APPENDIX D - DETERMINATION OF MAXIMUM FABRIC TEMPERATURES
D1 SCOPE
D2 TEST CONDITIONS
D2.1 General
D2.2 Equipment
D2.3 Standard test load
D2.4 Drying cycle
D3 TEST PROCEDURE
D3.1 Location of hottest area on inside surface of the drum
D3.2 Measurement of maximum temperature
D3.3 Examination of load
D4 RECORDING OF RESULT
APPENDIX E - PREPARATION OF STANDARD TEST LOADS
E1 SCOPE
E2 STANDARD MIXED COTTON TEST LOADS
E2.1 General
E2.2 Mass of test load
E2.3 Preconditioning of test load
E2.4 Life of test load components
E2.5 Bone-dry mass of test load
E3 PREPARATION OF STANDARD DAMP LOAD
APPENDIX F - INSTRUMENTATION AND TEST CONDITIONS
F1 GENERAL
F2 ACCURACY AND PRECISION OF MEASUREMENTS
F3 EXTERNAL AND AMBIENT CONDITIONS
F3.1 Electricity supply
F3.2 Ambient conditions
F4 MEASUREMENT ACCURACIES
F4.1 Mass
F4.2 Adhesive temperature indicators
F4.3 Surface temperature
F4.4 Water consumption
F4.5 Energy consumption
F4.6 Time
APPENDIX G - RESULT RECORDING SHEETS
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Energy Efficiency (Energy Using Products) Regulations 2002
Ministry: Ministry of Business Innovation and Employment - Digital, Communications and Transformation (RSM)
Section: Schedule 2
Citation context:Listed as a testing standard
Similar Standards
-
AS/NZS 2040.1:2021
Performance of household electrical appliances - Dishwashers, Part 1: Methods for measuring performance, energy and water consumption
-
AS/NZS 2040.2:2021
Performance of household electrical appliances - Clothes washing machines, Part 2: Energy efficiency labelling requirements
-
AS/NZS 2442.1 Supplement 3:1996
Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Pillow case -
AS/NZS 2442.1 Supplement 4:1996
Performance of household electrical appliances - Rotary clothes dryers - Energy consumption and performance - Test material - Bath towel
AS/NZS 2442.1:1996 PERFORMANCE OF HOUSEHOLD ELECTRICAL APPLIANCES-ROTARY CLOTHES DRYERS - ENERGY CONSUMPTION AND PERFORMANCE
PREFACE
CONTENTS
FOREWORD
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Bone-dry load items
1.4.2 Cool-down period
1.4.3 Dryer control mechanisms
1.4.4 Dryer types
1.4.5 Rated capacity
1.4.6 Statements of intention
1.4.7 Tested energy performance (TEP)
SECTION 2 MEASUREMENTS TO BE PERFORMED AND REQUIREMENTS OF TESTING
2.1 GENERAL
2.2 DETERMINATION OF MOISTURE REMOVAL
2.3 DETERMINATION OF MAXIMUM FABRIC TEMPERATURE
2.4 PREPARATION OF STANDARD TEST LOADS
2.5 TEST CONDITIONS
2.6 RECORDING OF RESULTS
SECTION 3 CONDITIONS FOR MEASUREMENT
3.1 GENERAL
3.2 CONDITION AND INSTALLATION OF MACHINE
3.3 LINT TRAP
3.4 EXHAUST
3.4.1 General
3.4.2 Dryers requiring exhaust duct
3.4.3 Dryers with optional exhaust duct
3.4.4 Dryers without exhaust duct
3.4.5 Recording
3.5 PROGRAM SETTINGS
3.6 INITIAL TEMPERATURE OF MACHINE
3.7 METHOD OF LOADING
SECTION 4 PERFORMANCE REQUIREMENTS
4.1 GENERAL
4.2 DRYING CLOTHES IN A SINGLE OPERATION
4.3 MAXIMUM FABRIC TEMPERATURE
4.4 MAXIMUM TESTED ENERGY PERFORMANCE
APPENDIX A - DETERMINATION OF MOISTURE REMOVAL AND ENERGY CONSUMPTION OF MANUAL AND TIMER DRYERS- DRAINED CONDENSER AND...
A1 SCOPE
A2 TEST CONDITIONS
A2.1 General
A2.2 Equipment
A2.3 Standard test load
A2.4 Drying cycle
A3 TEST METHOD
A3.1 Summary
A3.2 Variations to the stated test procedure
A3.3 Test procedure
A3.4 Test run validity
A3.5 Trial runs
A3.6 Optional additional measurements
APPENDIX B - DETERMINATION OF MOISTURE REMOVAL AND ENERGY CONSUMPTION OF AUTOSENSING DRYER-ALL TYPES
B1 SCOPE
B2 TEST CONDITIONS
B2.1 General
B2.2 Equipment
B2.3 Standard test load
B2.4 Drying cycle
B3 TEST METHOD
B3.1 Summary
B3.2 Test Procedures
B3.3 Other methods for establishing final cool-down (not applicable to undrained condenser type dryers)
B3.4 Test run validity
B3.5 Trial runs
APPENDIX C - DETERMINATION OF MOISTURE REMOVAL AND ENERGY CONSUMPTION OF MANUAL AND TIMER DRYERS- NON-DRAINABLE...
C1 SCOPE
C2 TEST CONDITIONS
C2.1 General
C2.2 Equipment
C2.3 Standard test load
C2.4 Drying cycle
C3 TEST METHOD
C3.1 Summary
C3.2 Test procedure
C3.3 Test run validity
C3.4 Trial runs
APPENDIX D - DETERMINATION OF MAXIMUM FABRIC TEMPERATURES
D1 SCOPE
D2 TEST CONDITIONS
D2.1 General
D2.2 Equipment
D2.3 Standard test load
D2.4 Drying cycle
D3 TEST PROCEDURE
D3.1 Location of hottest area on inside surface of the drum
D3.2 Measurement of maximum temperature
D3.3 Examination of load
D4 RECORDING OF RESULT
APPENDIX E - PREPARATION OF STANDARD TEST LOADS
E1 SCOPE
E2 STANDARD MIXED COTTON TEST LOADS
E2.1 General
E2.2 Mass of test load
E2.3 Preconditioning of test load
E2.4 Life of test load components
E2.5 Bone-dry mass of test load
E3 PREPARATION OF STANDARD DAMP LOAD
APPENDIX F - INSTRUMENTATION AND TEST CONDITIONS
F1 GENERAL
F2 ACCURACY AND PRECISION OF MEASUREMENTS
F3 EXTERNAL AND AMBIENT CONDITIONS
F3.1 Electricity supply
F3.2 Ambient conditions
F4 MEASUREMENT ACCURACIES
F4.1 Mass
F4.2 Adhesive temperature indicators
F4.3 Surface temperature
F4.4 Water consumption
F4.5 Energy consumption
F4.6 Time
APPENDIX G - RESULT RECORDING SHEETS
AS/NZS 2442.1:1996
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.