AS/NZS 2293.1:2018
Emergency lighting and exit signs for buildings - Part 1: System design, installation and operation
Provides designers, installers and certifiers of emergency lighting and exit signage schemes with the relevant requirements and guidance for the provision of emergency lighting and exit signs to all designated spaces within a building in order to ensure an acceptable level of illumination for the safe evacuation of occupants from those spaces in an emergency situation. It specifies updated installation requirements and adapts the Standard to current technologies, terminologies and deletes out of date references or methods.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$210.60 NZD
|
|
| HardCopy |
$234.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 2293.1:2018 EMERGENCY LIGHTING AND EXIT SIGNS FOR BUILDINGS - SYSTEM DESIGN, INSTALLATION AND OPERATION
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 APPLICATION
1.4 NORMATIVE REFERENCES
1.5 DEFINITIONS
1.5.1 Ambient temperature
1.5.2 Approved
1.5.3 Baseline data
1.5.4 Battery
1.5.5 Boost charge
1.5.6 Cell
1.5.7 Centrally supplied (emergency lighting) system
1.5.8 Combined emergency luminaire
1.5.9 Combined illuminated emergency exit sign
1.5.10 Designated area
1.5.11 Direct lighting
1.5.12 Electrolyte density
1.5.13 Emergency evacuation lighting
1.5.14 Emergency lighting
1.5.15 Emergency luminaire
1.5.16 Exit signs
1.5.17 Exit signage
1.5.18 Final subcircuit
1.5.19 Float charge
1.5.20 High risk task area lighting
1.5.21 Illuminance
1.5.22 Illumination
1.5.23 Indirect lighting
1.5.24 Integral self-contained emergency luminaire or exit sign
1.5.25 Light loss factor (LLF)
1.5.26 Light source(s)
1.5.27 Luminaire
1.5.28 Luminance
1.5.29 Luminous flux
1.5.30 Luminous intensity
1.5.31 Maintained emergency luminaire
1.5.32 Monitored supply
1.5.33 Mounting height
1.5.34 Nominal system voltage
1.5.35 Non-maintained emergency luminaire
1.5.36 Normal lighting
1.5.37 Pictorial element
1.5.38 Reflectance (reflection factor)
1.5.39 Regulatory authority
1.5.40 Remote self-contained emergency luminaire or exit sign
1.5.41 Required in-service duration
1.5.42 Reversible inverter
1.5.43 Single point (emergency lighting) system
1.5.44 Stand-by lighting
1.5.45 Static inverter
1.5.46 Sustained emergency luminaire
1.5.47 Utilization factor (UF)
1.6 ALTERATIONS AND ADDITIONS
SECTION 2 GENERAL REQUIREMENTS, SYSTEM DESIGN, OPERATION, ARRANGEMENT, CONTROL AND LABELLING
2.1 SCOPE OF SECTION
2.2 DURATION OF OPERATION
2.2.1 Initial
2.2.2 In-service
2.3 OPERATION, ARRANGEMENT AND CONTROL
2.3.1 General
2.3.2 Normal lighting requiring cool-down
2.3.3 Monitoring of supply failure
2.3.4 Installation and arrangement of a remote self-contained emergency luminaire or exit sign
2.4 LABELLING OF DEVICES CONTROLLING THE OPERATION OF EMERGENCY LIGHTING
2.5 LABELLING OF EMERGENCY LUMINAIRES AND EXIT SIGNS
2.6 IDENTIFICATION AND MARKING OF EMERGENCY LUMINAIRES OR EXIT SIGNS
SECTION 3 GENERAL REQUIREMENTS, PROVISION OF CHARGING INDICATION AND DISCHARGE TEST FACILITIES
3.1 SCOPE OF SECTION
3.2 SINGLE POINT SYSTEMS
3.2.1 Test switch
3.2.2 Visual indicator
3.3 REQUIRED DISCHARGE TEST FACILITIES
3.3.1 General
3.3.2 Manually operated testing facilities
3.3.3 Automatically operated testing facilities
SECTION 4 INSTALLATION REQUIREMENTS FOR EMERGENCY LUMINAIRES
4.1 SCOPE OF SECTION
4.2 GENERAL
4.2.1 Avoidance of obstruction of light
4.2.2 Avoidance of glare
4.2.3 Protection against unauthorized removal of lamps
4.3 PROVISION OF EMERGENCY LUMINAIRES
4.4 ACCEPTABLE EMERGENCY LUMINAIRES
4.5 SPECIFIC LOCATIONS REQUIRING EMERGENCY LUMINAIRES
4.6 INSTALLATIONS EMPLOYING DIRECT LIGHTING
4.6.1 Spacing of emergency luminaires
4.7 INSTALLATIONS EMPLOYING INDIRECT LIGHTING
4.8 LIGHTING OF STAIRWAYS
4.8.1 General
4.8.2 Direct lighting (spacing rules)
4.8.3 Direct lighting (illuminance calculations)
4.8.4 Indirect lighting (illuminance calculations)
SECTION 5 INSTALLATION REQUIREMENTS FOR EXIT SIGNS
5.1 SCOPE
5.2 REQUIRED LOCATIONS
5.3 USE OF EXTERNALLY ILLUMINATED SIGNS
5.4 SIGN COLOURS
5.4.1 Areas of normal illumination
5.4.2 Areas of low illumination
5.5 CHOICE OF IMAGES
5.6 SIZE OF PICTORIAL ELEMENT
5.7 ILLUMINATION
5.7.1 Internally illuminated signs
5.7.2 Externally illuminated signs
5.8 PHYSICAL CONDITIONS OF INSTALLATION
5.8.1 Mounting height
5.8.2 Maximum viewing distances
SECTION 6 CENTRALLY SUPPLIED SYSTEMS-EMERGENCY POWER SUPPLIES
6.1 SCOPE OF SECTION
6.2 EMERGENCY POWER SOURCE
6.2.1 Location
6.2.2 Fire resistance
6.2.3 Identification and access
6.2.4 Ventilation
6.2.5 Use of uninterruptible power supply (UPS) systems
6.2.6 Protection of emergency power wiring
6.3 BATTERIES AND THEIR INSTALLATION
6.3.1 Acceptable types of batteries
6.3.2 Battery capacity
6.3.3 Installation requirements
6.4 BATTERY CHARGER ASSEMBLY
6.4.1 General
6.4.2 Control of output voltage
6.4.3 Rating of battery charger
6.4.4 Enclosure of battery charger
6.4.5 Battery low voltage alarms
6.4.6 Means for disconnecting the emergency lighting or exit signage load
6.4.7 Instrumentation and controls
6.4.8 Rating plate
6.5 INVERTERS
6.5.1 Reversible inverters
6.5.2 Separate inverter
6.5.3 Inverter rating
6.5.4 Instrumentation and controls
6.5.5 Inverter enclosure
6.6 ALARM SYSTEMS
SECTION 7 INSTALLATION OF ELECTRICAL WIRING AND EQUIPMENT FOR CENTRALLY SUPPLIED SYSTEMS
7.1 SCOPE OF SECTION
7.2 CIRCUIT VOLTAGE DROP
7.3 PROTECTION AGAINST OVERCURRENT
7.4 PROTECTION OF THE ELECTRICAL INSTALLATION AGAINST FIRE
7.4.1 Forms of protection
7.4.2 Protective measures for buildings required to be constructed of fire resisting elements
7.4.3 Protective measures for buildings not required to be constructed of fire resisting elements
7.4.4 Exemptions from protection against exposure to fire
7.4.5 Protection of distribution boards and link boxes
7.4.6 Installation of wiring systems
7.5 SEGREGATION OR IDENTIFICATION OF SUBMAINS
7.6 ARRANGEMENT OF FINAL SUBCIRCUITS
APPENDIX A - NORMATIVE REFERENCES
APPENDIX B - TERMINAL BOX FOR THE CONNECTION OF EMERGENCY LUMINAIRES AND EXIT SIGNS IN CENTRALLY SUPPLIED SYSTEMS
B1 SCOPE
B2 CONNECTION
B3 INSTALLATION
APPENDIX C - EXAMPLE DIAGRAMS OF EMERGENCY LUMINAIRE AND EXIT SIGN SYSTEMS
APPENDIX D - VISUAL DETAILS OF EXIT SIGNS
D1 SCOPE
D2 TYPES OF EXIT SIGN
D3 APPEARANCE OF EXIT SIGN FACE
D3.1 Basic pictorial elements and shape
D3.2 Location of elements
D3.3 Additional background
D3.4 Borders
D3.5 Colours
D3.6 Size of pictorial elements
APPENDIX E - SPACING TABLES BASED ON 0.2 lx MINIMUM
APPENDIX F - SPACING TABLES BASED ON 1 lx MINIMUM
APPENDIX G - INFORMATION REQUIRED FOR MAINTAINING THE SYSTEM
G1 SCOPE
G2 OPERATING AND MAINTENANCE MANUAL
G2.1 Provision of a manual
G2.2 Information relating to central systems
G2.3 Information relating to single point systems
G2.4 Additional information relating to automatic discharge testing systems
G2.5 Additional information relating to indirect lighting systems
G3 PROVISION FOR THE RECORDING OF MAINTENANCE
BIBLIOGRAPHY
Amendments
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
Related Information
Similar Standards
-
AS/NZS 1680.0:2009
Interior lighting - Safe movement
-
AS/NZS 1680.1:2006
Interior and workplace lighting - Part 1: General principles and recommendations -
AS/NZS 1680.2.1:2008
Interior and workplace lighting - Part 2.1: Specific applications - Circulation spaces and other general areas -
AS/NZS 1680.2.2:2008
Interior and workplace lighting - Part 2.2: Specific applications - Office and screen-based tasks
AS/NZS 2293.1:2018 EMERGENCY LIGHTING AND EXIT SIGNS FOR BUILDINGS - SYSTEM DESIGN, INSTALLATION AND OPERATION
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 OBJECTIVE
1.3 APPLICATION
1.4 NORMATIVE REFERENCES
1.5 DEFINITIONS
1.5.1 Ambient temperature
1.5.2 Approved
1.5.3 Baseline data
1.5.4 Battery
1.5.5 Boost charge
1.5.6 Cell
1.5.7 Centrally supplied (emergency lighting) system
1.5.8 Combined emergency luminaire
1.5.9 Combined illuminated emergency exit sign
1.5.10 Designated area
1.5.11 Direct lighting
1.5.12 Electrolyte density
1.5.13 Emergency evacuation lighting
1.5.14 Emergency lighting
1.5.15 Emergency luminaire
1.5.16 Exit signs
1.5.17 Exit signage
1.5.18 Final subcircuit
1.5.19 Float charge
1.5.20 High risk task area lighting
1.5.21 Illuminance
1.5.22 Illumination
1.5.23 Indirect lighting
1.5.24 Integral self-contained emergency luminaire or exit sign
1.5.25 Light loss factor (LLF)
1.5.26 Light source(s)
1.5.27 Luminaire
1.5.28 Luminance
1.5.29 Luminous flux
1.5.30 Luminous intensity
1.5.31 Maintained emergency luminaire
1.5.32 Monitored supply
1.5.33 Mounting height
1.5.34 Nominal system voltage
1.5.35 Non-maintained emergency luminaire
1.5.36 Normal lighting
1.5.37 Pictorial element
1.5.38 Reflectance (reflection factor)
1.5.39 Regulatory authority
1.5.40 Remote self-contained emergency luminaire or exit sign
1.5.41 Required in-service duration
1.5.42 Reversible inverter
1.5.43 Single point (emergency lighting) system
1.5.44 Stand-by lighting
1.5.45 Static inverter
1.5.46 Sustained emergency luminaire
1.5.47 Utilization factor (UF)
1.6 ALTERATIONS AND ADDITIONS
SECTION 2 GENERAL REQUIREMENTS, SYSTEM DESIGN, OPERATION, ARRANGEMENT, CONTROL AND LABELLING
2.1 SCOPE OF SECTION
2.2 DURATION OF OPERATION
2.2.1 Initial
2.2.2 In-service
2.3 OPERATION, ARRANGEMENT AND CONTROL
2.3.1 General
2.3.2 Normal lighting requiring cool-down
2.3.3 Monitoring of supply failure
2.3.4 Installation and arrangement of a remote self-contained emergency luminaire or exit sign
2.4 LABELLING OF DEVICES CONTROLLING THE OPERATION OF EMERGENCY LIGHTING
2.5 LABELLING OF EMERGENCY LUMINAIRES AND EXIT SIGNS
2.6 IDENTIFICATION AND MARKING OF EMERGENCY LUMINAIRES OR EXIT SIGNS
SECTION 3 GENERAL REQUIREMENTS, PROVISION OF CHARGING INDICATION AND DISCHARGE TEST FACILITIES
3.1 SCOPE OF SECTION
3.2 SINGLE POINT SYSTEMS
3.2.1 Test switch
3.2.2 Visual indicator
3.3 REQUIRED DISCHARGE TEST FACILITIES
3.3.1 General
3.3.2 Manually operated testing facilities
3.3.3 Automatically operated testing facilities
SECTION 4 INSTALLATION REQUIREMENTS FOR EMERGENCY LUMINAIRES
4.1 SCOPE OF SECTION
4.2 GENERAL
4.2.1 Avoidance of obstruction of light
4.2.2 Avoidance of glare
4.2.3 Protection against unauthorized removal of lamps
4.3 PROVISION OF EMERGENCY LUMINAIRES
4.4 ACCEPTABLE EMERGENCY LUMINAIRES
4.5 SPECIFIC LOCATIONS REQUIRING EMERGENCY LUMINAIRES
4.6 INSTALLATIONS EMPLOYING DIRECT LIGHTING
4.6.1 Spacing of emergency luminaires
4.7 INSTALLATIONS EMPLOYING INDIRECT LIGHTING
4.8 LIGHTING OF STAIRWAYS
4.8.1 General
4.8.2 Direct lighting (spacing rules)
4.8.3 Direct lighting (illuminance calculations)
4.8.4 Indirect lighting (illuminance calculations)
SECTION 5 INSTALLATION REQUIREMENTS FOR EXIT SIGNS
5.1 SCOPE
5.2 REQUIRED LOCATIONS
5.3 USE OF EXTERNALLY ILLUMINATED SIGNS
5.4 SIGN COLOURS
5.4.1 Areas of normal illumination
5.4.2 Areas of low illumination
5.5 CHOICE OF IMAGES
5.6 SIZE OF PICTORIAL ELEMENT
5.7 ILLUMINATION
5.7.1 Internally illuminated signs
5.7.2 Externally illuminated signs
5.8 PHYSICAL CONDITIONS OF INSTALLATION
5.8.1 Mounting height
5.8.2 Maximum viewing distances
SECTION 6 CENTRALLY SUPPLIED SYSTEMS-EMERGENCY POWER SUPPLIES
6.1 SCOPE OF SECTION
6.2 EMERGENCY POWER SOURCE
6.2.1 Location
6.2.2 Fire resistance
6.2.3 Identification and access
6.2.4 Ventilation
6.2.5 Use of uninterruptible power supply (UPS) systems
6.2.6 Protection of emergency power wiring
6.3 BATTERIES AND THEIR INSTALLATION
6.3.1 Acceptable types of batteries
6.3.2 Battery capacity
6.3.3 Installation requirements
6.4 BATTERY CHARGER ASSEMBLY
6.4.1 General
6.4.2 Control of output voltage
6.4.3 Rating of battery charger
6.4.4 Enclosure of battery charger
6.4.5 Battery low voltage alarms
6.4.6 Means for disconnecting the emergency lighting or exit signage load
6.4.7 Instrumentation and controls
6.4.8 Rating plate
6.5 INVERTERS
6.5.1 Reversible inverters
6.5.2 Separate inverter
6.5.3 Inverter rating
6.5.4 Instrumentation and controls
6.5.5 Inverter enclosure
6.6 ALARM SYSTEMS
SECTION 7 INSTALLATION OF ELECTRICAL WIRING AND EQUIPMENT FOR CENTRALLY SUPPLIED SYSTEMS
7.1 SCOPE OF SECTION
7.2 CIRCUIT VOLTAGE DROP
7.3 PROTECTION AGAINST OVERCURRENT
7.4 PROTECTION OF THE ELECTRICAL INSTALLATION AGAINST FIRE
7.4.1 Forms of protection
7.4.2 Protective measures for buildings required to be constructed of fire resisting elements
7.4.3 Protective measures for buildings not required to be constructed of fire resisting elements
7.4.4 Exemptions from protection against exposure to fire
7.4.5 Protection of distribution boards and link boxes
7.4.6 Installation of wiring systems
7.5 SEGREGATION OR IDENTIFICATION OF SUBMAINS
7.6 ARRANGEMENT OF FINAL SUBCIRCUITS
APPENDIX A - NORMATIVE REFERENCES
APPENDIX B - TERMINAL BOX FOR THE CONNECTION OF EMERGENCY LUMINAIRES AND EXIT SIGNS IN CENTRALLY SUPPLIED SYSTEMS
B1 SCOPE
B2 CONNECTION
B3 INSTALLATION
APPENDIX C - EXAMPLE DIAGRAMS OF EMERGENCY LUMINAIRE AND EXIT SIGN SYSTEMS
APPENDIX D - VISUAL DETAILS OF EXIT SIGNS
D1 SCOPE
D2 TYPES OF EXIT SIGN
D3 APPEARANCE OF EXIT SIGN FACE
D3.1 Basic pictorial elements and shape
D3.2 Location of elements
D3.3 Additional background
D3.4 Borders
D3.5 Colours
D3.6 Size of pictorial elements
APPENDIX E - SPACING TABLES BASED ON 0.2 lx MINIMUM
APPENDIX F - SPACING TABLES BASED ON 1 lx MINIMUM
APPENDIX G - INFORMATION REQUIRED FOR MAINTAINING THE SYSTEM
G1 SCOPE
G2 OPERATING AND MAINTENANCE MANUAL
G2.1 Provision of a manual
G2.2 Information relating to central systems
G2.3 Information relating to single point systems
G2.4 Additional information relating to automatic discharge testing systems
G2.5 Additional information relating to indirect lighting systems
G3 PROVISION FOR THE RECORDING OF MAINTENANCE
BIBLIOGRAPHY
Amendments
AS/NZS 2293.1:2018
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.