AS/NZS 1859.3:2017
Reconstituted wood-based panels - Specifications - Part 3: Decorative overlaid wood panels
Provides performance requirements and specifications for the manufacture and application of decorative overlaid wood panels. This standard applies to four types of decorative overlay applied to wood panel substrate.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$132.30 NZD
|
|
| HardCopy |
$147.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 1859.3:2017 RECONSTITUTED WOOD-BASED PANELS-SPECIFICATIONS - DECORATIVE OVERLAID WOOD PANELS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Layon
1.4.2 Overtrim margin
1.4.3 Substrate
1.5 CLASSIFICATION
SECTION 2 GENERAL REQUIREMENTS
2.1 DIMENSIONAL TOLERANCES
2.2 APPEARANCE
2.2.1 Defects
2.2.2 Faults
2.2.3 Imperfections
2.2.4 Colour, pattern and surface finish
2.3 SUBSTRATE
2.4 MARKING
SECTION 3 LOW PRESSURE MELAMINE
3.1 SCOPE OF SECTION
3.2 RESISTANCE TO SURFACE ABRASION
3.3 POROSITY
3.4 STEAM RESISTANCE
3.5 CRACKING RESISTANCE
3.6 STAIN RESISTANCE
3.7 SUPPLEMENTARY TESTS
SECTION 4 PVC FILM
4.1 SCOPE OF SECTION
4.2 GLUE SPREAD
4.3 BOND STRENGTH
4.4 HEAT RESISTANCE
4.5 MOISTURE RESISTANCE
4.6 BOND DURABILITY
SECTION 5 PAPER FOILS
5.1 SCOPE OF SECTION
5.2 GLUE SPREAD
5.3 HEAT RESISTANCE
5.4 MOISTURE RESISTANCE
5.5 CROSSCUT
SECTION 6 WOOD VENEERS
6.1 GENERAL REQUIREMENTS
6.1.1 Veneer
6.1.2 Panel forms
6.1.3 Face grade veneers
6.1.4 Backing grade veneers
6.1.5 Adhesive
6.1.6 Construction
6.1.7 Finish
6.2 GLUE SPREAD
6.3 VENEER BOND STRENGTH
6.4 VENEER BOND DURABILITY
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
APPENDIX B - STORAGE AND HANDLING OF DECORATIVE OVERLAID WOOD PANELS
B1 INTRODUCTION
B2 RECOMMENDATIONS FOR STORAGE AND HANDLING
APPENDIX C - SELECTION AND APPLICATION OF SCREW FASTENERS
C1 INTRODUCTION
C2 TAPERED WOOD SCREWS
C3 RECOMMENDED FASTENERS
C4 FIXING METHOD
Previous versions
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Reconstituted wood-based panels - Specifications - Part 4: Wet-processed fibreboard
High pressure decorative laminates - Sheets made from thermosetting resins - Classification and specifications
Reconstituted wood-based panels - Methods of testing - Part 2: Decorative overlaid panels
Related Information
Similar Standards
-
AS/NZS 1859.1:2017
Reconstituted wood-based panels - Specifications - Part 1: Particleboard -
AS/NZS 1859.2:2017
Reconstituted wood-based panels - Specifications - Part 2: Dry process fibreboard -
AS/NZS 1859.4:2018
Reconstituted wood-based panels - Specifications - Part 4: Wet process fibreboard -
BS 5881:1980
Method for determination of grammage of single layers of solid fibreboard
AS/NZS 1859.3:2017 RECONSTITUTED WOOD-BASED PANELS-SPECIFICATIONS - DECORATIVE OVERLAID WOOD PANELS
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 APPLICATION
1.3 REFERENCED DOCUMENTS
1.4 DEFINITIONS
1.4.1 Layon
1.4.2 Overtrim margin
1.4.3 Substrate
1.5 CLASSIFICATION
SECTION 2 GENERAL REQUIREMENTS
2.1 DIMENSIONAL TOLERANCES
2.2 APPEARANCE
2.2.1 Defects
2.2.2 Faults
2.2.3 Imperfections
2.2.4 Colour, pattern and surface finish
2.3 SUBSTRATE
2.4 MARKING
SECTION 3 LOW PRESSURE MELAMINE
3.1 SCOPE OF SECTION
3.2 RESISTANCE TO SURFACE ABRASION
3.3 POROSITY
3.4 STEAM RESISTANCE
3.5 CRACKING RESISTANCE
3.6 STAIN RESISTANCE
3.7 SUPPLEMENTARY TESTS
SECTION 4 PVC FILM
4.1 SCOPE OF SECTION
4.2 GLUE SPREAD
4.3 BOND STRENGTH
4.4 HEAT RESISTANCE
4.5 MOISTURE RESISTANCE
4.6 BOND DURABILITY
SECTION 5 PAPER FOILS
5.1 SCOPE OF SECTION
5.2 GLUE SPREAD
5.3 HEAT RESISTANCE
5.4 MOISTURE RESISTANCE
5.5 CROSSCUT
SECTION 6 WOOD VENEERS
6.1 GENERAL REQUIREMENTS
6.1.1 Veneer
6.1.2 Panel forms
6.1.3 Face grade veneers
6.1.4 Backing grade veneers
6.1.5 Adhesive
6.1.6 Construction
6.1.7 Finish
6.2 GLUE SPREAD
6.3 VENEER BOND STRENGTH
6.4 VENEER BOND DURABILITY
APPENDIX A - PURCHASING GUIDELINES
A1 GENERAL
A2 INFORMATION TO BE SUPPLIED BY THE PURCHASER
APPENDIX B - STORAGE AND HANDLING OF DECORATIVE OVERLAID WOOD PANELS
B1 INTRODUCTION
B2 RECOMMENDATIONS FOR STORAGE AND HANDLING
APPENDIX C - SELECTION AND APPLICATION OF SCREW FASTENERS
C1 INTRODUCTION
C2 TAPERED WOOD SCREWS
C3 RECOMMENDED FASTENERS
C4 FIXING METHOD
Previous versions
AS/NZS 1859.3:2017
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.