AS/NZS 1859.2:2004
Reconstituted wood-based panels - Specifications - Dry-processed fibreboard
Specifies product requirements for the purposes of quality control in manufacture and performance requirements for dry-processed fibreboards, including ultra-low-density, low-density, medium-density and high-density fibreboards.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$70.20 NZD
|
|
| HardCopy |
$78.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription information Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team. |
AS/NZS 1859.2:2004 RECONSTITUTED WOOD-BASED PANELS-SPECIFICATIONS - DRY-PROCESSED FIBREBOARD
PREFACE
CONTENTS
1 SCOPE
2 APPLICATION
3 REFERENCED DOCUMENTS
4 DEFINITIONS
4.1 Dry condition
4.2 Dry-processed fibreboard
4.3 General purpose
4.4 Humid conditions
4.5 High performance (HP)
5 CLASSIFICATION
6 REQUIREMENTS AT DISPATCH
6.1 General
6.2 Dimensions
6.3 Formaldehyde emission
7 SPECIFIC REQUIREMENTS
7.1 General
7.2 Lower specification limits
7.3 Upper specification limits
7.4 Moisture resistance
7.5 Specific requirements for STD general-purpose, ultra low-density fibreboards
7.6 Specific requirements for STD general-purpose, low-density fibreboards
7.7 Specific requirements for STD general-purpose, medium-density fibreboards
7.8 Specific requirements for STD general-purpose, high-density fibreboards
7.9 Specific requirements for MR general-purpose, medium-density fibreboards
7.10 Specific requirements for MR general-purpose, high-density fibreboards
7.11 Specific requirements for HP, medium-density fibreboards
8 SUPPLEMENTARY PROPERTIES
9 VERIFICATION OF COMPLIANCE
10 MARKING
APPENDIX A - TYPICAL APPLICATIONS OF DRY-PROCESSED FIBREBOARD
APPENDIX B - CALCULATION OF 5-PERCENTILE AND 95-PERCENTILE VALUES
B1 GENERAL
B2 NOTATION SYMBOLS
B3 CALCULATIONS
B3.1 Mean value of each individual panel (panel mean)
B3.2 Standard deviation within each panel
B3.3 Grand mean (mean of panel means)
B3.4 Standard deviation of panel means
B3.5 Mean standard deviation of the test values within panels
B3.6 5-percentile and 95-percentile of a normally distributed panel property
B3.7 Process mean value
Keep me up-to-date
Register to receive notifications when updates are made to this standard.
References
Reconstituted wood-based panels - Methods of test - Wet bending strength after immersion in water at 70 oC or boiling temperature
Reconstituted wood-based panels - Methods of test - Moisture resistance under cyclic test conditions
Reconstituted wood-based panels - Methods of test - Resistance to axial withdrawal of screws
Reconstituted wood-based panels - Methods of test - Dimensional changes associated with changes in relative humidity
Related Information
Similar Standards
-
BS EN 1193:1998
Timber structures. Structural timber and glued laminated timber. Determination of shear strength and mechanical properties perpendicular to the grain
-
BS EN 12369-3:2022
Wood-based panels. Characteristic values for structural design, Solid wood panels
-
BS EN 12369-3:2022 - TC
Tracked Changes. Wood-based panels. Characteristic values for structural design, Solid wood panels
-
BS EN 12775:2001
Solid wood panels. Classification and terminology
AS/NZS 1859.2:2004 RECONSTITUTED WOOD-BASED PANELS-SPECIFICATIONS - DRY-PROCESSED FIBREBOARD
PREFACE
CONTENTS
1 SCOPE
2 APPLICATION
3 REFERENCED DOCUMENTS
4 DEFINITIONS
4.1 Dry condition
4.2 Dry-processed fibreboard
4.3 General purpose
4.4 Humid conditions
4.5 High performance (HP)
5 CLASSIFICATION
6 REQUIREMENTS AT DISPATCH
6.1 General
6.2 Dimensions
6.3 Formaldehyde emission
7 SPECIFIC REQUIREMENTS
7.1 General
7.2 Lower specification limits
7.3 Upper specification limits
7.4 Moisture resistance
7.5 Specific requirements for STD general-purpose, ultra low-density fibreboards
7.6 Specific requirements for STD general-purpose, low-density fibreboards
7.7 Specific requirements for STD general-purpose, medium-density fibreboards
7.8 Specific requirements for STD general-purpose, high-density fibreboards
7.9 Specific requirements for MR general-purpose, medium-density fibreboards
7.10 Specific requirements for MR general-purpose, high-density fibreboards
7.11 Specific requirements for HP, medium-density fibreboards
8 SUPPLEMENTARY PROPERTIES
9 VERIFICATION OF COMPLIANCE
10 MARKING
APPENDIX A - TYPICAL APPLICATIONS OF DRY-PROCESSED FIBREBOARD
APPENDIX B - CALCULATION OF 5-PERCENTILE AND 95-PERCENTILE VALUES
B1 GENERAL
B2 NOTATION SYMBOLS
B3 CALCULATIONS
B3.1 Mean value of each individual panel (panel mean)
B3.2 Standard deviation within each panel
B3.3 Grand mean (mean of panel means)
B3.4 Standard deviation of panel means
B3.5 Mean standard deviation of the test values within panels
B3.6 5-percentile and 95-percentile of a normally distributed panel property
B3.7 Process mean value
AS/NZS 1859.2:2004
Online Library subscription information
Online library subscriptions provide a cost-effective solution for organisations of any size to access the latest standards, offering 24/7 access to a personalised catalogue. The service ensures subscribers have have the most up-to-date version of selected standards, incluing automatic updates for any amendments or versions. Pricing is dependent on the chosen standards and the number of concurrent users, with discounts applied from the standards PDF price. For customised subscriptions or further inquiries, contact the Online Library team.