AS/NZS 1735.18:2002
Lifts, escalators and moving walks (SAA Lift Code) - Passenger lifts for private residence - Automatically controlled
Specifies requirements for automatically controlled small-sized, low-speed passenger lifts that are installed in private residence, as defined in AS 1735.1.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$100.80 NZD
|
|
| HardCopy |
$112.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 1735.18:2002 LIFTS, ESCALATORS, AND MOVING WALKS - PASSENGER LIFTS FOR PRIVATE RESIDENCE-AUTOMATICALLY CONTROLLED
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
SECTION 2 DESIGN LIMITATIONS
2.1 SPEED
2.2 TRAVEL
2.3 RATED LOAD
2.4 CAR SIZE
2.4.1 Area
2.4.2 Dimensions
2.5 FACTOR OF SAFETY
2.5.1 Other than for driving machines
2.5.2 For driving machines
SECTION 3 MATERIALS
3.1 GENERAL
3.2 WEATHER RESISTANCE
SECTION 4 DRIVING MACHINES
4.1 GENERAL
4.2 SHAFTS AND ATTACHMENTS
4.3 DRIVE DIRECTION
4.4 MANUAL OPERATION
4.5 LOCATION OF EQUIPMENT
SECTION 5 SUSPENSION AND SUPPORTING SYSTEMS
5.1 MEANS
5.2 ROPE
5.2.1 Number
5.2.2 Type and diameter
5.2.3 End attachments
5.2.4 Angle of fleet
5.2.5 Equalizers
5.2.6 Drums and sheaves
5.2.7 Data plate
5.3 CHAIN
5.3.1 Number
5.3.2 Type
5.3.3 Anchorages
5.3.4 Alignment
5.3.5 Equalizers
5.3.6 Drive sprockets
5.3.7 Chainwheels, sheaves and pulleys
5.3.8 Overhung shafts
5.3.9 Guarding
5.3.10 Data plate
5.4 RACK AND PINION
5.4.1 Racks
5.4.2 Pinions
5.5 SCREW-DRIVING MACHINES
5.6 HYDRAULICS
5.6.1 General
5.6.2 Flow restriction valve
5.6.3 Door lock valve
SECTION 6 LIFTWELLS
6.1 SUPPORTING STRUCTURE
6.2 LIFTWELL ENCLOSURE
6.3 SURFACE OF LIFTWELL
6.3.1 Extent of smooth surface
6.3.2 Material
6.3.3 Projections and recesses
6.4 TOP OVERTRAVEL OF CAR
6.5 CAR CLEARANCES
6.5.1 Bottom
6.5.2 Top
6.5.3 Horizontal
6.6 PITS NOT EXTENDING TO LOWEST FLOOR OF BUILDING
SECTION 7 GUIDE RAILS
7.1 PROVISION
7.2 LENGTH
7.3 GUIDE RAILS AND ASSOCIATED FIXINGS
7.4 STRESSES IN AND DEFLECTIONS OF GUIDE RAILS
SECTION 8 GUIDE SHOES
8.1 GENERAL
8.2 ROLLER GUIDE SHOES
SECTION 9 BUFFERS
9.1 BOTTOM BUFFERS
9.2 TOP BUFFERS
SECTION 10 SAFETY GEAR
10.1 PROVISION
10.2 MATERIAL
10.3 CONSTRUCTION
10.4 ACTUATION
10.5 RELEASE
10.6 PERFORMANCE
SECTION 11 COUNTERWEIGHTS
11.1 GENERAL
11.2 GUARDING
SECTION 12 CARS
12.1 FRAME
12.2 ENCLOSURE
12.3 NUMBER OF ENTRANCES
12.4 SAFETY PROTECTION OF CAR ENTRANCE
12.5 HEIGHT
12.6 CAR ROOF
12.6.1 General
12.6.2 Strength
12.6.3 Standing area
12.7 VENTILATION
12.8 RESCUE MEANS
12.9 CAR TOE GUARD
SECTION 13 DOORS
13.1 PROVISION OF LANDING DOORS
13.2 TYPES
13.3 WIDTH
13.4 HEIGHT
13.5 CONSTRUCTION
13.6 POWER-OPERATED DOORS
13.7 SELF-CLOSING OF LANDING DOORS
13.8 GLAZING IN DOOR LEAVES
SECTION 14 DOOR LOCKS AND DOOR CONTACTS
14.1 CARS
14.2 LANDINGS
14.2.1 Provision
14.2.2 Type
14.2.3 Accessibility
SECTION 15 CONTROL DEVICES
15.1 LOCATION
15.1.1 Controls
15.1.2 Controller equipment
15.2 OPERATING CONTROL BUTTONS
15.2.1 Provision
15.2.2 Operation
15.3 REVERSING CONTACTORS
15.4 OPERATING CIRCUIT
15.5 ANTI-CREEP LEVELLING DEVICE
15.6 CAR ENTRANCE OBSTRUCTION SENSOR CONTROLLER
SECTION 16 ELECTRICAL
16.1 POWER SUPPLY
16.1.1 Maximum voltage of the control-circuit and of the supply
16.1.2 Circuit
16.2 WIRING
16.2.1 General
16.2.2 Travelling cables
16.2.3 Earthing of electrical apparatus on cars
16.3 CIRCUIT-BREAKER OR SWITCH
16.3.1 General
16.3.2 Electrohydraulic lifts
16.4 DOOR LOCK CIRCUITS
16.5 MOTOR PROTECTION
16.6 CAR STOP SWITCH
16.7 LIMIT SWITCHES
16.7.1 General
16.7.2 Normal
16.7.3 Overtravel
16.8 REVERSE PHASE RELAY
16.9 SAFETY GEAR SWITCH
16.10 SLACK ROPE OR CHAIN SWITCH
16.11 LIFTWELL FLAP SWITCH
16.12 DOOR-LOCK VALVE TEST SWITCH
16.13 PIT STOP SWITCH
16.14 SHEAVE-ROOM OR PLATFORM STOP SWITCH
16.15 BLOCKING DEVICE SWITCHES
16.16 BACK-UP NUT SAFETY SWITCH
SECTION 17 LIGHTING
17.1 NORMAL LIGHTING
17.1.1 Landings
17.1.2 Cars
17.2 EMERGENCY LIGHTING
17.3 LIGHTING FOR PITS AND OVERHEADS
17.4 LIGHTING FOR CONTROL EQUIPMENT
SECTION 18 COMMUNICATION
18.1 PROVISION
18.2 ACCESSIBILITY
18.3 TELEPHONE SYSTEM
18.4 AUDIBLE ALARM
SECTION 19 NOTICES
19.1 LOAD PLATE
19.2 NAMEPLATE
19.3 EMERGENCY INSTRUCTIONS
APPENDIX A - CARE AND RESPONSIBILITY
APPENDIX B - GUIDE FOR SELECTION OF LIFT TYPE
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
Related Information
Similar Standards
-
AS/NZS 4431:1996
Guidelines for safe working on new lift installations in new constructions
-
BS 2655-1:1970
Specification for lifts, escalators, passenger conveyors and paternosters, General requirements for electric, hydraulic and hand-powered lifts
-
BS 2655-10:1972
Specification for lifts, escalators, passenger conveyors and paternosters, General requirements for guarding
-
BS 2655-4:1969
Specification for lifts, escalators, passenger conveyors and paternosters, General requirements for escalators and passenger conveyors
AS/NZS 1735.18:2002 LIFTS, ESCALATORS, AND MOVING WALKS - PASSENGER LIFTS FOR PRIVATE RESIDENCE-AUTOMATICALLY CONTROLLED
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 DEFINITIONS
SECTION 2 DESIGN LIMITATIONS
2.1 SPEED
2.2 TRAVEL
2.3 RATED LOAD
2.4 CAR SIZE
2.4.1 Area
2.4.2 Dimensions
2.5 FACTOR OF SAFETY
2.5.1 Other than for driving machines
2.5.2 For driving machines
SECTION 3 MATERIALS
3.1 GENERAL
3.2 WEATHER RESISTANCE
SECTION 4 DRIVING MACHINES
4.1 GENERAL
4.2 SHAFTS AND ATTACHMENTS
4.3 DRIVE DIRECTION
4.4 MANUAL OPERATION
4.5 LOCATION OF EQUIPMENT
SECTION 5 SUSPENSION AND SUPPORTING SYSTEMS
5.1 MEANS
5.2 ROPE
5.2.1 Number
5.2.2 Type and diameter
5.2.3 End attachments
5.2.4 Angle of fleet
5.2.5 Equalizers
5.2.6 Drums and sheaves
5.2.7 Data plate
5.3 CHAIN
5.3.1 Number
5.3.2 Type
5.3.3 Anchorages
5.3.4 Alignment
5.3.5 Equalizers
5.3.6 Drive sprockets
5.3.7 Chainwheels, sheaves and pulleys
5.3.8 Overhung shafts
5.3.9 Guarding
5.3.10 Data plate
5.4 RACK AND PINION
5.4.1 Racks
5.4.2 Pinions
5.5 SCREW-DRIVING MACHINES
5.6 HYDRAULICS
5.6.1 General
5.6.2 Flow restriction valve
5.6.3 Door lock valve
SECTION 6 LIFTWELLS
6.1 SUPPORTING STRUCTURE
6.2 LIFTWELL ENCLOSURE
6.3 SURFACE OF LIFTWELL
6.3.1 Extent of smooth surface
6.3.2 Material
6.3.3 Projections and recesses
6.4 TOP OVERTRAVEL OF CAR
6.5 CAR CLEARANCES
6.5.1 Bottom
6.5.2 Top
6.5.3 Horizontal
6.6 PITS NOT EXTENDING TO LOWEST FLOOR OF BUILDING
SECTION 7 GUIDE RAILS
7.1 PROVISION
7.2 LENGTH
7.3 GUIDE RAILS AND ASSOCIATED FIXINGS
7.4 STRESSES IN AND DEFLECTIONS OF GUIDE RAILS
SECTION 8 GUIDE SHOES
8.1 GENERAL
8.2 ROLLER GUIDE SHOES
SECTION 9 BUFFERS
9.1 BOTTOM BUFFERS
9.2 TOP BUFFERS
SECTION 10 SAFETY GEAR
10.1 PROVISION
10.2 MATERIAL
10.3 CONSTRUCTION
10.4 ACTUATION
10.5 RELEASE
10.6 PERFORMANCE
SECTION 11 COUNTERWEIGHTS
11.1 GENERAL
11.2 GUARDING
SECTION 12 CARS
12.1 FRAME
12.2 ENCLOSURE
12.3 NUMBER OF ENTRANCES
12.4 SAFETY PROTECTION OF CAR ENTRANCE
12.5 HEIGHT
12.6 CAR ROOF
12.6.1 General
12.6.2 Strength
12.6.3 Standing area
12.7 VENTILATION
12.8 RESCUE MEANS
12.9 CAR TOE GUARD
SECTION 13 DOORS
13.1 PROVISION OF LANDING DOORS
13.2 TYPES
13.3 WIDTH
13.4 HEIGHT
13.5 CONSTRUCTION
13.6 POWER-OPERATED DOORS
13.7 SELF-CLOSING OF LANDING DOORS
13.8 GLAZING IN DOOR LEAVES
SECTION 14 DOOR LOCKS AND DOOR CONTACTS
14.1 CARS
14.2 LANDINGS
14.2.1 Provision
14.2.2 Type
14.2.3 Accessibility
SECTION 15 CONTROL DEVICES
15.1 LOCATION
15.1.1 Controls
15.1.2 Controller equipment
15.2 OPERATING CONTROL BUTTONS
15.2.1 Provision
15.2.2 Operation
15.3 REVERSING CONTACTORS
15.4 OPERATING CIRCUIT
15.5 ANTI-CREEP LEVELLING DEVICE
15.6 CAR ENTRANCE OBSTRUCTION SENSOR CONTROLLER
SECTION 16 ELECTRICAL
16.1 POWER SUPPLY
16.1.1 Maximum voltage of the control-circuit and of the supply
16.1.2 Circuit
16.2 WIRING
16.2.1 General
16.2.2 Travelling cables
16.2.3 Earthing of electrical apparatus on cars
16.3 CIRCUIT-BREAKER OR SWITCH
16.3.1 General
16.3.2 Electrohydraulic lifts
16.4 DOOR LOCK CIRCUITS
16.5 MOTOR PROTECTION
16.6 CAR STOP SWITCH
16.7 LIMIT SWITCHES
16.7.1 General
16.7.2 Normal
16.7.3 Overtravel
16.8 REVERSE PHASE RELAY
16.9 SAFETY GEAR SWITCH
16.10 SLACK ROPE OR CHAIN SWITCH
16.11 LIFTWELL FLAP SWITCH
16.12 DOOR-LOCK VALVE TEST SWITCH
16.13 PIT STOP SWITCH
16.14 SHEAVE-ROOM OR PLATFORM STOP SWITCH
16.15 BLOCKING DEVICE SWITCHES
16.16 BACK-UP NUT SAFETY SWITCH
SECTION 17 LIGHTING
17.1 NORMAL LIGHTING
17.1.1 Landings
17.1.2 Cars
17.2 EMERGENCY LIGHTING
17.3 LIGHTING FOR PITS AND OVERHEADS
17.4 LIGHTING FOR CONTROL EQUIPMENT
SECTION 18 COMMUNICATION
18.1 PROVISION
18.2 ACCESSIBILITY
18.3 TELEPHONE SYSTEM
18.4 AUDIBLE ALARM
SECTION 19 NOTICES
19.1 LOAD PLATE
19.2 NAMEPLATE
19.3 EMERGENCY INSTRUCTIONS
APPENDIX A - CARE AND RESPONSIBILITY
APPENDIX B - GUIDE FOR SELECTION OF LIFT TYPE
AS/NZS 1735.18:2002
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.