AS/NZS 1562.3:1996
Design and installation of sheet roof and wall cladding - Plastic
Specifies the procedures for the design and installation of plastic roof and wall cladding materials.
| Get this standard | Prices exclude GST | |
|---|---|---|
| PDF ( Single user document) |
$70.20 NZD
|
|
| HardCopy |
$78.00 NZD
|
|
| Networkable PDF |
Price varies
|
|
| Online Library ( Annual subscription) |
Info
Price varies
Online Library subscription pricing The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz. |
AS/NZS 1562.3:1996 DESIGN AND INSTALLATION OF SHEET ROOF AND WALL CLADDING - PLASTIC
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 REFERENCED STANDARDS
SECTION 2 GENERAL REQUIREMENTS
2.1 SCOPE OF SECTION
2.2 MATERIAL
2.3 TRANSPORT, HANDLING AND STORAGE
2.4 SAFETY PRECAUTIONS
2.4.1 General
2.4.2 Fire precautions
2.4.3 Safety mesh
2.4.4 Walking and standing on roofs
SECTION 3 DESIGN OF PLASTIC ROOF AND WALL CLADDING
3.1 SCOPE OF SECTION
3.2 AGGRESSIVE ENVIRONMENTS
3.3 LOADINGS
3.3.1 Wind forces
3.3.2 Loadings during construction
3.3.3 Bracing
3.4 SUPPORTING STRUCTURE
3.5 RAFTERS, BATTENS AND PURLINS
3.5.1 Alignment
3.5.2 Width and depth
3.6 STUDS AND NOGGINGS (DWANGS)
3.6.1 Alignment
3.6.2 Width and depth
3.7 FASTENERS
SECTION 4 INSTALLATION
4.1 INSTALLATION OF ROOF AND WALL CLADDING SHEETS
4.1.1 Scope
4.1.2 General provisions
4.1.3 Installation of safety mesh
4.2 INSTALLATION OF uPVC WALL CLADDING BOARDS
4.2.1 Scope
4.2.2 Application
4.2.3 General provisions
4.2.4 Handling and storage
4.2.5 Installation precautions
4.2.6 Installation
SECTION 5 TESTING
5.1 APPLICABILITY OF TESTS
5.2 RESISTANCE TO WIND FORCES
5.2.1 General
5.2.2 Resistance to wind pressures for non-cyclone regions
5.2.3 Resistance to wind pressures for cyclone regions
5.3 RESISTANCE TO IMPACT (SANDBAG) FOR ROOFING SHEET MATERIALS
5.3.1 General
5.3.2 Assessment
5.4 RESISTANCE TO IMPACT (SANDBAG) FOR WALL CLADDING BOARDS
APPENDIX A - LIST OF REFERENCED DOCUMENTS
APPENDIX B - SAFETY MESH
B1 GENERAL
B2 LOADING
B3 DEEMED TO COMPLY
B4 POSITION AND FIXING
B5 CORROSIVE ATMOSPHERE
APPENDIX C - SAFETY MESH LOAD TEST
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C3.1 Test frame
C3.2 Test loads
C4 TEST SPECIMEN
C5 PROCEDURE
C6 REPORT
Keep me up-to-date
Sign up to receive updates when there are changes to this standard
References
Methods of testing sheet roof and wall cladding - Resistance to impact (sandbag) for sheet roof materials
Methods of testing sheet roof and wall cladding - Resistance to impact (sandbag) for wall boards
Related Information
Similar Standards
-
AS/NZS 1562.2:1999
Design and installation of sheet roof and wall cladding - Corrugated fibre-reinforced cement
-
AS/NZS 1635.10.1:1995
Methods of test for pressure-sensitive adhesive tape - Resistance to shear loading at elevated temperatures
-
AS/NZS 1635.11.1:1995
Methods of test for pressure-sensitive adhesive tape - Water vapour transmission rate
-
AS/NZS 1635.21.1:1995
Methods of test for pressure-sensitive adhesive tape - Mending stability
AS/NZS 1562.3:1996 DESIGN AND INSTALLATION OF SHEET ROOF AND WALL CLADDING - PLASTIC
PREFACE
CONTENTS
SECTION 1 SCOPE AND GENERAL
1.1 SCOPE
1.2 REFERENCED DOCUMENTS
1.3 REFERENCED STANDARDS
SECTION 2 GENERAL REQUIREMENTS
2.1 SCOPE OF SECTION
2.2 MATERIAL
2.3 TRANSPORT, HANDLING AND STORAGE
2.4 SAFETY PRECAUTIONS
2.4.1 General
2.4.2 Fire precautions
2.4.3 Safety mesh
2.4.4 Walking and standing on roofs
SECTION 3 DESIGN OF PLASTIC ROOF AND WALL CLADDING
3.1 SCOPE OF SECTION
3.2 AGGRESSIVE ENVIRONMENTS
3.3 LOADINGS
3.3.1 Wind forces
3.3.2 Loadings during construction
3.3.3 Bracing
3.4 SUPPORTING STRUCTURE
3.5 RAFTERS, BATTENS AND PURLINS
3.5.1 Alignment
3.5.2 Width and depth
3.6 STUDS AND NOGGINGS (DWANGS)
3.6.1 Alignment
3.6.2 Width and depth
3.7 FASTENERS
SECTION 4 INSTALLATION
4.1 INSTALLATION OF ROOF AND WALL CLADDING SHEETS
4.1.1 Scope
4.1.2 General provisions
4.1.3 Installation of safety mesh
4.2 INSTALLATION OF uPVC WALL CLADDING BOARDS
4.2.1 Scope
4.2.2 Application
4.2.3 General provisions
4.2.4 Handling and storage
4.2.5 Installation precautions
4.2.6 Installation
SECTION 5 TESTING
5.1 APPLICABILITY OF TESTS
5.2 RESISTANCE TO WIND FORCES
5.2.1 General
5.2.2 Resistance to wind pressures for non-cyclone regions
5.2.3 Resistance to wind pressures for cyclone regions
5.3 RESISTANCE TO IMPACT (SANDBAG) FOR ROOFING SHEET MATERIALS
5.3.1 General
5.3.2 Assessment
5.4 RESISTANCE TO IMPACT (SANDBAG) FOR WALL CLADDING BOARDS
APPENDIX A - LIST OF REFERENCED DOCUMENTS
APPENDIX B - SAFETY MESH
B1 GENERAL
B2 LOADING
B3 DEEMED TO COMPLY
B4 POSITION AND FIXING
B5 CORROSIVE ATMOSPHERE
APPENDIX C - SAFETY MESH LOAD TEST
C1 SCOPE
C2 PRINCIPLE
C3 APPARATUS
C3.1 Test frame
C3.2 Test loads
C4 TEST SPECIMEN
C5 PROCEDURE
C6 REPORT
AS/NZS 1562.3:1996
Online Library subscription pricing
The cost of your subscription will depend on which standards you want to access, and how many people in your organisation need to be able to access the Online Library subscription at the same time (concurrent users). During your subscription period, we are also able to make any necessary changes and ensure you are aware of any pricing changes that result. For a quote, contact our Online Library team by emailing onlinelibrary@standards.govt.nz.